Burlington Texas Directional Boring: Houston Black Clay, US 77 and Walkers Creek
Quick Answer: The USDA soil survey maps Houston Black clay across Burlington, with the Navarro Group and Marlbrook Marl mapped beneath the soil profile. Trinity Boring Solutions does directional boring, also called horizontal directional drilling (HDD), for routes under US 77 and Walkers Creek. Burlington is 340 road miles from our Yukon, Oklahoma main office, and Church Avenue is one of its named streets. At about 40 inches, the survey maps clay throughout Burlington, so sticky cuttings and fluid returns need attention during a bore.
Burlington bores at a glance
- Unincorporated community in Milam County, Texas. Population 81 (2020 Census count).
- Road distance from our Yukon, Oklahoma main office: 340 miles, about 6.6 hours of driving.
- Ground: Houston Black soil is mapped on 72 percent of the area, with clay about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 6 percent of the area.
- Highways inside the boundary: US 77 and FM 1963. State permit office: TxDOT Bryan District.
- Railroad track inside the boundary: none mapped.
- Named streams inside the boundary: Walkers Creek and Little Pond Creek.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who can I call for directional boring in Burlington along US 77?
For directional boring along Burlington’s US 77 corridor, Trinity Boring Solutions handles the work; the USDA survey maps Houston Black clay through the top five feet. Burlington is an unincorporated community in Milam County, with 81 people in the 2020 Census count. We install water, sewer, gas, electric conduit and fiber along routes such as Church Avenue and FM 1963.
Our main office is in Yukon, Oklahoma, and Burlington work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our record of no utility strike in over 25 years starts with treating every marked line near US 77 as a potential conflict; Oncor Electric Delivery Company reports service in Milam County, though address level ownership must be checked. Trinity is a family business begun in 1965, with directional boring work dating to 1982.

How does Houston Black soil shape our bore plan in Burlington?
The USDA soil survey maps Houston Black soil across 72% of Burlington and Burleson clay across another 13%. Tinn clay covers 6%, while Ferris and Heiden soils make up the remaining mapped series. Clay is the surface texture throughout Burlington, and the survey also maps clay at about 40 inches below the surface. Average clay content at that depth is 53%, with heavy clay mapped across the whole community. We treat Burleson soil maps as mapped patterns, not test borings, and verify conditions before setting a bore path. For a bore, the Houston Black clay can stick to a reamer and grip pipe, so staged reaming and controlled fluid returns matter.
| USDA soil survey, inside the Burlington mapped community boundary | What is mapped |
|---|---|
| Soil series mapped | Houston Black 72 percent, Burleson 13 percent, Tinn 6 percent, Ferris 6 percent and Heiden 3 percent |
| Texture at the surface | clay 100 percent |
| Texture about 40 inches down | clay 100 percent |
| Engineering class about 40 inches down | fat clay (CH) 100 percent |
| Average clay content about 40 inches down | 53 percent |
| Bedrock mapped within 60 inches | 6 percent of the area (0 percent hard rock, 6 percent weathered rock) |
| Seasonal water table within 60 inches | 0 percent of the area |
| Flood prone soils | 6 percent of the area |
| High corrosion risk for uncoated steel | 100 percent of the area |
The USDA soil survey maps no bedrock within 40 inches in Burlington, but weathered bedrock appears within 60 inches in 6% of the area. Seasonal water table is not mapped within 60 inches, while flood prone soils cover 6%, a concern to check near Walkers Creek. High steel corrosion risk is mapped across Burlington, so the line owner should consider casing and tracer wire materials; HDPE is not affected by that soil concern. The geologic map names the Navarro Group and Marlbrook Marl, undivided, of Late Cretaceous age, with clay, siltstone, mudstone, sandstone and limestone.
How do we plan a bore through Burlington clay near Walkers Creek?
For Burlington’s heavy clay, we control fluid returns, ream in stages and keep the pipe ready before opening the hole for the final pull. Houston Black soil can cling to the tooling.
- Clay control: Houston Black clay can ball on the reamer, so we use staged reaming and manage returns while keeping the Burlington bore path under observation.
- Pipe pull: On Burlington’s heavy clay routes, we have the pipe laid out before the final ream so it can be pulled without leaving the hole open.
- Creek route: Near Walkers Creek, we plan the bore depth to pass below the channel and check whether the crossing needs jurisdiction review.
- Line exposure: Along Church Avenue or US 77, we hydrovac pothole marked utilities before drilling near them because Burlington locate paint does not show depth.

Where does a line have to go under Walkers Creek in Burlington?
Burlington’s mapped road network includes US 77 for 3.3 miles and FM 1963 for 1.2 miles inside the community boundary. A utility crossing beneath either road needs a route and depth plan suited to the highway right of way. Church Avenue is the longest named street at 0.48 miles, followed by Railroad Street at 0.26 miles and 3rd Street at 0.15 miles. Pecan Street and Elm Street are also mapped routes where a service bore can avoid opening the street surface.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| US 77 | US highway | 3.3 roadway miles inside | State highway office |
| FM 1963 | State highway | 1.2 roadway miles inside | State highway office |
| Walkers Creek | Stream | 3.03 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Little Pond Creek | Stream | 0.76 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Dry Hollow | Stream nearby | 0.5 miles outside | Checked for Corps of Engineers jurisdiction |
No railroad is mapped inside Burlington or within 1 mile outside the community boundary, and no street and rail crossing is mapped there. Walkers Creek runs through Burlington for 3.03 channel miles, while Little Pond Creek runs for 0.76 miles. Six mapped street crossings of named streams make creek and drainage review relevant to route planning. No lakes or ponds are mapped within 1 mile, so we assess nearby Little Pond Creek separately for the bore plan.
Who approves a Burlington bore in Milam County?
Burlington has no city government, so a street bore on Railroad Street or Church Avenue is not a city permit matter; the responsible county or state authority depends on the route. For work in the US 77 or FM 1963 right of way, the utility owner files for a TxDOT utility permit through RULIS, and TxDOT’s Bryan District reviews it. For permits through the TxDOT Bryan District, we prepare the bore plan and profile and work under the utility owner’s permit. TxDOT cover requirements set depth: electric and communication lines need 60 inches at crossings and 48 inches along the right of way; water lines need 60 inches at crossings and 36 inches along it. Pressurized sewer crossings need 60 inches. Walkers Creek crossings are checked during planning for U.S. Army Corps of Engineers jurisdiction. No railroad is mapped near Burlington, so a rail crossing agreement is not indicated by the mapped network.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Who owns the utility lines in Burlington and Milam County?
The water provider for a specific Burlington address has to be confirmed with the county or local water district before a bore is planned; available EPA records do not match a provider to this community. Entergy Texas, Oncor Electric Delivery Company, Bartlett Electric Cooperative, Bluebonnet Electric Cooperative and Heart of Texas Electric Cooperative report electric service in Milam County, but that does not establish which company serves each address. Before a conduit bore near US 77, we confirm the line owner and expose marked utilities with hydrovac potholing; paint shows position, not depth.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| Entergy Texas, Oncor Electric Delivery Company, Bartlett Electric Cooperative, Bluebonnet Electric Cooperative and Heart of Texas Electric Cooperative | Electric utilities reporting service in Milam County | EIA Form 861 | Confirm the line owner by address |
Housing figures are not published for Burlington because the survey sample is too small to rely on. A small community can mean longer service runs or lines following routes such as FM 1963, so the address and path matter more than an assumed house age. Milam County averages 38.0 inches of precipitation a year, with May wettest at 4.7 inches and July driest at 1.8 inches; that can affect ground conditions along Walkers Creek. We pothole marked lines before drilling near them.

How far is Burlington from Ben Arnold and our Yukon yard?
Burlington is in Milam County, Texas, at an elevation of 438 feet across 4.02 square miles, with ZIP code 76519. Ben Arnold is 4.0 miles southeast, Rosebud is 5.0 miles north, Cameron is 10.0 miles south and Buckholts is 12.2 miles southwest. Cameron is both the nearest larger city and the county seat. Our Yukon, Oklahoma yard is 340 road miles away, a 6.6 hour drive; that distance is part of planning crew and equipment mobilization for a Church Avenue or US 77 job.
Places near Burlington
- Directional boring in Ben Arnold: 4 miles southeast
- Directional boring in Rosebud: 5 miles north
- Directional boring in Cameron: 10 miles south
- Directional boring in Buckholts: 12.2 miles southwest
- Directional boring in Lott: 14.2 miles north
What would we bore near Railroad Street in Burlington?
- Highway crossing: A bore beneath US 77 needs a planned route under the travel lanes and the cover required for the line type.
- Creek crossing: A route under Walkers Creek is planned to stay below the channel, with jurisdiction checked during Burlington project planning.
- Water service: A service bore along Church Avenue starts with confirming the provider for that Burlington address before choosing the connection route.
- Electric conduit: Near FM 1963, we confirm which Milam County reported utility owns the line before planning a Burlington conduit bore.
- Fiber route: Railroad Street offers a named route to assess for a fiber bore, with marked utilities exposed before drilling nearby.
- Street service: At 3rd Street, a bore can pass beneath the roadway rather than cutting the Burlington street surface.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
How do I get a quote for work near Church Avenue in Burlington?
We can quote a Burlington bore once we know where it runs, what goes in the ground, the line size and the length. For example, give us a map pin or address near Church Avenue, identify whether it is water or fiber, specify the pipe or conduit size, and provide the footage. A sketch or plans help show nearby roads and crossings.
The price follows the job details, including length, pipe or conduit size, soil, crossings and access. Houston Black clay can affect reaming and fluid control; a route under US 77 adds highway planning, while a Walkers Creek crossing calls for drainage review. Concrete or pavement, exposed utilities, pits, excavator time and sand backfill also shape the work. Burlington’s 340 road miles from Yukon affects mobilization, and an emergency or high profile job can change the plan.
Questions people ask about boring in Burlington
Does Trinity take directional boring work in Burlington, Milam County, and who staffs it?
Yes. Trinity takes directional boring work in Burlington, Milam County. Our Yukon office manages the customer relationship while our own crews or vetted partner drilling contractors can perform the work. You deal with Trinity through the bore log, whether the route is on Church Avenue or elsewhere in the community.
Who approves a bore under Burlington’s US 77, and which state office reviews it?
TxDOT reviews a US 77 right of way utility permit through its Bryan District. The utility owner submits the application in RULIS, while we prepare the bore plan and profile and work under that owner’s permit. The required cover depends on whether the line near Burlington is electric, communication, water or pressurized sewer.
Can a utility line be bored under Walkers Creek in Burlington?
A line can be planned beneath Walkers Creek, with the bore depth set to pass below the channel. The creek runs 3.03 channel miles through Burlington, so the specific crossing needs review during planning, including a check for U.S. Army Corps of Engineers jurisdiction.
Which electric company owns lines at a Burlington address in Milam County?
The address specific owner must be confirmed before planning conduit. Entergy Texas, Oncor Electric Delivery Company, Bartlett Electric Cooperative, Bluebonnet Electric Cooperative and Heart of Texas Electric Cooperative report electric service in Milam County, but those county reports do not identify the provider for every Burlington address.
Who is responsible for Burlington streets like 3rd Street, and does a bore cut the road?
Burlington is unincorporated and has no city government, so 3rd Street is not under a city government. The responsible authority depends on the road and work location. A directional bore can pass below the street surface instead of cutting it, subject to applicable county or state approval.
Does housing age near Railroad Street affect replacement bores in Burlington?
Housing age figures are not published for Burlington because the sample is too small to rely on. A replacement bore near Railroad Street should be planned around the actual line location and condition, not an assumed installation date. We expose marked utilities along the proposed route before drilling near them.
How far is Burlington from Cameron and Trinity’s Yukon office, and does distance affect the job?
Burlington is 340 road miles and a 6.6 hour drive from our Yukon, Oklahoma main office, so we plan mobilization accordingly. Cameron, the nearest larger city and county seat, is 10.0 miles south of Burlington. The Yukon distance is one factor in arranging equipment and crew mobilization for a local route such as FM 1963.
How much notice does Texas811 need for a Burlington bore near Church Avenue?
For a bore near Church Avenue, Texas law requires a locate request at least 48 hours before excavation starts, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before. If our Milam County start slips more than 14 days past the original notice, we make a new request. Before work continues along FM 1963, we have worn or moved marks refreshed through Texas811.
What affects the cost of a directional bore under US 77 in Burlington?
The job scope sets the price: length, line size, Houston Black clay, exposed utilities, pavement and crossings all matter. A US 77 route brings highway planning, while a Walkers Creek crossing adds drainage considerations. Pit work, excavator time, backfill, urgency and mobilization from Yukon also affect the work involved.
Where the Burlington facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Burlington
- U.S. Census Bureau, TIGER/Line 2024: Burlington boundary, roads, rail lines and streams
- U.S. Census Bureau, 2020 Census: Burlington population count
- U.S. Census Bureau, American Community Survey 2019 to 2023: Burlington housing units and year built
- Macrostrat geologic map compilation: map units under Burlington
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Milam County
- U.S. Geological Survey, Elevation Point Query Service: Burlington elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Burlington
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Burlington
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Burlington, Texas
Type the address of your job in Burlington. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
