Ben Arnold Texas Directional Boring: Houston Black Soil, US 77 and Walkers Creek
Quick Answer: US 77 is the main route a utility bore may need to pass beneath in Ben Arnold, and we do directional boring, also called horizontal directional drilling (HDD), in Texas. Ben Arnold is 344 road miles from our Yukon, Oklahoma main office, so US 77 access and mobilization matter. Houston Black soil is a key ground condition here. Its heavy clay can stick to the reamer and grip pipe, so we plan the fluid and reaming sequence around it.
Ben Arnold bores at a glance
- Unincorporated community in Milam County, Texas. Population 117 (2020 Census count).
- Road distance from our Yukon, Oklahoma main office: 344 miles, about 6.7 hours of driving.
- Ground: Houston Black soil is mapped on 35 percent of the area, with clay about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 11 percent of the area.
- Highways inside the boundary: US 77 and FM 1444. State permit office: TxDOT Bryan District.
- Railroad track inside the boundary: none mapped.
- Named streams inside the boundary: Walkers Creek.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Which contractor handles directional boring near 4th Street in Ben Arnold?
We take directional boring work in Ben Arnold, an unincorporated community in Milam County with a 2020 Census count of 117 people. Along US 77, FM 1444 or 4th Street, we install water, sewer, gas, electric conduit and fiber lines by choosing a bore path that fits the route and the line being placed.
Our main office is in Yukon, Oklahoma, and Ben Arnold work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our family business began in 1965, and we have been boring since 1982. Four decades of directional boring helps us plan for the sticky Houston Black clay that can load a reamer and grip a new line.

What kind of ground should crews expect in Ben Arnold near Houston Black soil?
The USDA soil survey maps Houston Black soil across 35 percent of Ben Arnold, with Burleson clay covering another 23 percent. At about 40 inches below the surface, the mapped texture is clay across the area, with an average clay content of 50 percent. The surface is mapped as 86 percent clay and 14 percent loam. These are soil map patterns, not test borings. Heavy clay can stick to the reamer, build up on it and tighten around the pipe, so the bore plan needs to account for those conditions.
| USDA soil survey, inside the Ben Arnold mapped community boundary | What is mapped |
|---|---|
| Soil series mapped | Houston Black 35 percent, Burleson 23 percent, Wilson 14 percent, Tinn 12 percent and Ferris 11 percent |
| Texture at the surface | clay 86 percent and loam 14 percent |
| Texture about 40 inches down | clay 100 percent |
| Engineering class about 40 inches down | fat clay (CH) 86 percent and lean clay (CL) 14 percent |
| Average clay content about 40 inches down | 50 percent |
| Bedrock mapped within 60 inches | 11 percent of the area (0 percent hard rock, 11 percent weathered rock) |
| Seasonal water table within 60 inches | 0 percent of the area |
| Flood prone soils | 12 percent of the area |
| High corrosion risk for uncoated steel | 100 percent of the area |
The USDA soil survey maps bedrock within 60 inches in 11 percent of Ben Arnold; weathered bedrock accounts for that mapped area, so a bore may meet harder material in some locations. Seasonal water tables are not mapped within 60 inches, while flood prone soils cover 12 percent, a factor to check near Walkers Creek. High steel corrosion risk is mapped across the area, so the line owner should consider casing and tracer wire material. The Midway Group, undivided, is mapped here as Paleocene age clay, silty and sandy material.
How do crews bore Ben Arnold clay without losing control?
In Ben Arnold, we plan for Houston Black clay by managing fluid and opening the hole in stages. That helps limit sticky cuttings on the reamer and keeps the pipe pull aligned with the bore path.
- Houston Black clay can stick to the reamer, so we use thinner drilling fluid with polymer and open the hole in stages before pulling pipe.
- Because heavy clay is mapped across Ben Arnold, we watch fluid returns near US 77 and manage pressure to avoid lifting pavement.
- Walkers Creek has mapped flood prone soils nearby, so we plan the bore depth below the channel and check creek jurisdiction during planning.
- Along 4th Street, we hydrovac expose every marked utility on the bore path before the drill approaches it; surface marks do not show depth.

Where might a line need to go under US 77 in Ben Arnold?
US 77 and FM 1444 are the main mapped highway routes inside Ben Arnold, with 3.3 roadway miles of US 77 and 2.2 of FM 1444. A line that crosses either road needs a route and depth plan that fits the road corridor. The named streets include 4th Street, 3rd Street and Orth Street, each mapped for 0.21 miles inside the community. Butts Street is also mapped for 0.21 miles, so a short street crossing can still shape where entry and exit pits fit.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| US 77 | US highway | 3.3 roadway miles inside | State highway office |
| FM 1444 | State highway | 2.2 roadway miles inside | State highway office |
| Walkers Creek | Stream | 5.19 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Little Pond Creek | Stream nearby | 0.5 miles outside | Checked for Corps of Engineers jurisdiction |
No railroad is mapped inside Ben Arnold or within one mile outside its boundary, and mapped records show no street and rail crossings here. Walkers Creek runs 5.19 channel miles through the community, with two mapped street crossings of named streams. A route near Walkers Creek needs creek depth and bank access considered during planning. No lakes or ponds are mapped within one mile, so the creek is the named water feature to account for on a local crossing.
Whose permission does a Ben Arnold bore in Milam County need?
Ben Arnold has no city government, so street approval depends on whether the route is on a county road or state right of way. For a bore beneath US 77 or FM 1444, the utility owner applies for a TxDOT utility permit through RULIS, and the TxDOT Bryan District reviews it. We prepare the bore plan and profile and work under the permit issued to the line owner. TxDOT requires electric and communication lines to have 60 inches of cover at highway crossings; water and pressurized sewer lines also need 60 inches. Walkers Creek crossings are checked for Army Corps jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
What is already in the ground in Milam County near Ben Arnold?
The water provider for an address on 4th Street or another Ben Arnold route has to be confirmed with Milam County or the local water district before a bore is planned. EPA drinking water records do not tie a water system to this community. Utilities reporting electric service in Milam County include Entergy Texas, Oncor Electric Delivery Company, Bartlett Electric Cooperative, Bluebonnet Electric Cooperative and Heart of Texas Electric Cooperative. In Milam County, we confirm the line owner before planning an electric conduit bore and its permit path.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| Entergy Texas, Oncor Electric Delivery Company, Bartlett Electric Cooperative, Bluebonnet Electric Cooperative and Heart of Texas Electric Cooperative | Electric utilities reporting service in Milam County | EIA Form 861 | Confirm the line owner by address |
Housing figures are not published reliably for a place as small as Ben Arnold, so the known roads and the 13.97 public road miles help frame where existing services may run. A route along US 77 or FM 1444 may involve a long service run rather than a short connection. May averages 4.7 inches of precipitation, while July averages 1.8 inches, so timing around wet ground matters. On Orth Street, we expose a marked line with hydrovac before drilling near it; paint shows position, not depth.

Do you cover Ben Arnold and nearby Cameron?
Ben Arnold is in Milam County, at an elevation of 375 feet, and covers 6.01 square miles of mapped community area. The ZIP code is 76519. Burlington is 4.0 miles northwest, Cameron is 6.3 miles south, and Rosebud is 8.6 miles north. Cameron is both the county seat and the nearest larger city, while Buckholts is 11.1 miles southwest and Rogers is 15.8 miles west. From our Yukon yard, Ben Arnold is 344 road miles away and a 6.7 hour drive, so mobilization is part of planning work near US 77.
Places near Ben Arnold
- Directional boring in Burlington: 4 miles northwest
- Directional boring in Cameron: 6.3 miles south
- Directional boring in Rosebud: 8.6 miles north
- Directional boring in Buckholts: 11.1 miles southwest
- Directional boring in Rogers: 15.8 miles west
What boring work comes up near Orth Street in Ben Arnold?
- Highway crossing: A bore beneath US 77 needs a planned route and cover depth that fit the highway corridor.
- Road crossing: A connection crossing FM 1444 can be bored beneath the road surface, with pits placed outside the travel route.
- Street service: A water or sewer line near 3rd Street can follow a short connection route without cutting the street surface.
- Creek crossing: A line beneath Walkers Creek needs channel depth and bank access considered before the bore route is set.
- Electric conduit: On Orth Street, we confirm the line owner and expose marked utilities before directing a conduit bore past them.
- Fiber route: A fiber bore along 4th Street can connect properties while keeping the street surface intact.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What should I send for a Butts Street bore quote in Ben Arnold?
For a Butts Street quote, send the address or map pin, what is going in the ground, the pipe or conduit size and the footage; a sketch or plans help. That gives us a first look at the route and the connection points. If the line crosses US 77 or reaches toward Walkers Creek, include that on the sketch so we can review the route details.
The scope on Butts Street sets the work: length, pipe size, soil, utility crossings, pavement, creek access, pits and excavator time all matter. Houston Black clay can call for staged reaming and careful fluid control. A US 77 crossing brings highway depth and permit planning into the route. A Walkers Creek crossing adds bank and waterway planning. Ben Arnold is 344 road miles from Yukon, so mobilization also affects the job plan.
Questions people ask about boring in Ben Arnold
Does Trinity Boring Solutions take directional boring jobs in Ben Arnold and Milam County?
Yes, we take directional boring work in Ben Arnold and across Texas. The work is handled by our own crews or from satellite yards run by partner drilling contractors we have vetted. We stay your contact from the first call through the bore log, whether the route is near 4th Street or US 77.
Who approves a bore under US 77 in Ben Arnold through TxDOT Bryan District?
The utility owner applies for the TxDOT utility permit through RULIS, and the TxDOT Bryan District reviews a US 77 crossing in Milam County. Near Walkers Creek, we provide the bore plan and profile, then work under the permit issued to the utility owner. The route and required cover are set out in that permit.
Can a line be bored under Walkers Creek in Ben Arnold?
A line can be planned beneath Walkers Creek, which has 5.19 channel miles mapped through Ben Arnold. We set the bore route and depth to stay under the channel, then check during planning whether the crossing falls under U.S. Army Corps of Engineers jurisdiction. Access to both creek banks also affects the setup.
Who owns the electric lines in Ben Arnold and Milam County for a conduit bore?
The line owner depends on the specific address in Ben Arnold. Entergy Texas, Oncor Electric Delivery Company, Bartlett Electric Cooperative, Bluebonnet Electric Cooperative and Heart of Texas Electric Cooperative report service in Milam County, but that does not establish which one serves a given route. We confirm ownership and conduit requirements before planning a bore near FM 1444.
Who is in charge of Orth Street in Ben Arnold, and does a bore need a street cut?
Ben Arnold is unincorporated, so it has no city government; the county or state is responsible depending on who controls the route. A bore near Orth Street can pass beneath pavement without cutting it, with pits placed in dirt on each side when space allows. State highway work follows TxDOT permit requirements.
Will groundwater or flood prone ground affect bore pits near Walkers Creek in Ben Arnold?
The USDA soil survey maps flood prone soils across 12 percent of Ben Arnold, including ground to consider near Walkers Creek. It does not map a seasonal water table within 60 inches. We still check the specific pit locations and creek conditions when planning, since mapped soil information is not a site test.
Does Trinity cover Burlington and rural sites outside Ben Arnold?
Yes, we take work in Burlington and at rural sites beyond the mapped Ben Arnold community boundary. Burlington is 4.0 miles northwest, and Cameron is 6.3 miles south. We plan each route from its address, access and scope rather than assuming that a nearby property has the same road or utility conditions.
How much notice does Texas811 need before boring near 4th Street in Ben Arnold?
For a 4th Street bore, submit a locate request through Texas811 at least two working days before excavation, excluding Saturdays, Sundays and legal holidays. The request cannot be made more than 14 days before the start. If the start moves more than 14 days past the original notice, submit a new request; refresh worn or moved marks before continuing.
How does Houston Black soil affect directional bore costs under US 77 in Ben Arnold?
The price depends on the job details, including bore length, pipe or conduit size, soil, exposed utility crossings, pavement, pits and equipment time. A US 77 crossing adds permit and cover planning, while Houston Black clay affects drilling method. Walkers Creek access and the 344 road miles from Yukon can also change mobilization and setup.
Where the Ben Arnold facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Ben Arnold
- U.S. Census Bureau, TIGER/Line 2024: Ben Arnold boundary, roads, rail lines and streams
- U.S. Census Bureau, 2020 Census: Ben Arnold population count
- Macrostrat geologic map compilation: map units under Ben Arnold
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Milam County
- U.S. Geological Survey, Elevation Point Query Service: Ben Arnold elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Ben Arnold
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Ben Arnold
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Ben Arnold, Texas
Type the address of your job in Ben Arnold. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
