trinityboringsolutions.com

Robinson Texas Directional Boring: Houston Black Clay, Crow Creek, Interstate 35

Quick Answer: We do directional boring, also called horizontal directional drilling (HDD), in Texas for Robinson routes such as crossings beneath Crow Creek. Robinson is 307 road miles from our Yukon, Oklahoma main office, and Interstate 35 is one of the local routes we plan around. Houston Black soil is part of a clay heavy ground profile, so sticky cuttings and pressure need attention. Before drilling near Interstate 35 in Robinson, we expose marked lines so the crossing plan accounts for verified utility depth.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Robinson bores at a glance

  • Incorporated city in McLennan County, Texas. Population 12,986 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 307 miles, about 5.9 hours of driving.
  • Ground: Houston Black soil is mapped on 31 percent of the area, with clay about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 15 percent of the area.
  • Highways inside the boundary: Interstate 35, US 77, Texas State Highway 6, Loop 340 and FM 3148. State permit office: TxDOT Waco District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Crow Creek, Flat Creek, Castleman Creek and Chambers Creek.
  • Public water: City of Robinson, surface water.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who can I call for directional boring in Robinson, McLennan County?

Trinity Boring Solutions handles directional boring in Robinson, McLennan County, including water or sewer routes beneath Old Robinson Road and fiber or electric conduit along streets such as Moonlight Drive. The Census Bureau Vintage 2024 estimate puts Robinson at 12,986 people. We install water, sewer, gas, electric conduit and fiber, routing each line to fit the address and the crossings on its path.

Our main office is in Yukon, Oklahoma, and Robinson work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. With City of Robinson water lines and electric service reported in McLennan County, careful exposure matters; we have had no utility strike in over 25 years. Our family business started in 1965, and we have done directional boring since 1982, including work planned around Robinson streets and utilities.

Aerial view of a Trinity Boring Solutions directional drill set up for a gas line bore at a commercial site
Our directional drill set up for a gas line bore at a commercial site, seen from above. Photos on this page are from our jobs in Oklahoma and Texas.

How does Houston Black soil affect boring plans in Robinson?

The USDA soil survey maps Houston Black soil across 31 percent of Robinson, with Branyon soil at 13 percent and Heiden at 8 percent. At about 40 inches below the surface, clay is mapped across 73 percent of the area, and the average clay content is 49 percent. The survey also maps clay as the surface texture across 63 percent. We use Branyon and Heiden maps as soil patterns, not test borings, and verify conditions before setting a bore path. For a bore near Robinson Drive, heavy clay can cling to the reamer and grip pipe, so fluid and reaming need control.

USDA soil survey, inside the Robinson city limitsWhat is mapped
Soil series mappedHouston Black 31 percent, Branyon 13 percent, Heiden 8 percent, Lott 6 percent and Ovan 5 percent
Texture at the surfaceclay 63 percent, silty clay 16 percent and clay loam 9 percent
Texture about 40 inches downclay 73 percent, silty clay 13 percent and bedrock 4 percent
Engineering class about 40 inches downfat clay (CH) 78 percent, lean clay (CL) 13 percent and clayey sand (SC) 3 percent
Average clay content about 40 inches down49 percent
Bedrock mapped within 60 inches15 percent of the area (0 percent hard rock, 15 percent weathered rock)
Seasonal water table within 60 inches1 percent of the area
Flood prone soils10 percent of the area
High corrosion risk for uncoated steel91 percent of the area

Weathered bedrock is mapped within 60 inches across 15 percent of Robinson, and within 40 inches across 4 percent; no hard bedrock is mapped within 60 inches. Seasonal water table is mapped within 60 inches in 1 percent of the area, while flood prone soils cover 10 percent. High steel corrosion risk is mapped across 91 percent, so the line owner should consider casing and tracer wire materials; HDPE avoids that concern. The Cenozoic Silty Clay Decomposition Residuum includes clay, chalk and limestone, which can mean slower drilling where the bore meets weathered rock.

How does Robinson clay affect a bore plan?

In Robinson, we plan the bore around Houston Black soil and the clay mapped below the surface. We manage sticky cuttings, keep fluid pressure in check and expose marked utilities before drilling near them.

  1. Clay control: Houston Black soil can make cuttings sticky and wrap them around the reamer, so we use thinner fluid, polymer and staged reaming to keep the hole workable.
  2. Pressure watch: With clay mapped across 73 percent of Robinson at about 40 inches, we monitor fluid returns near pavement to avoid lifting the surface.
  3. Utility exposure: Before drilling near a marked City of Robinson water line or a county reported electric line, we hydrovac pothole it because paint does not show depth.
  4. Creek setup: At Crow Creek, we plan the bore to pass beneath the channel, track the drill head from the surface and log depth and pitch as it advances.
Reel of 4 inch HDPE conduit on the exit side of a 385 foot directional bore under creeks and wetland in Guthrie, Oklahoma
A reel of 4 inch HDPE conduit on the exit side of a 385 foot bore under creeks and wetland in Guthrie, Oklahoma.

Where might a Robinson line go under Crow Creek?

Robinson bores can cross Interstate 35, US 77, Texas State Highway 6, Loop 340 and several farm to market roads. The route and right of way determine how the bore is set up. Old Robinson Road runs 7.97 miles within the city, Robinson Drive 7.51 miles and Moonlight Drive 5.34 miles. A route along any of those streets may need to pass beneath pavement or driveways, so pits can be placed on each side rather than cutting the surface.

CrossingTypeMapped extentWho has a say
Interstate 35Interstate5.6 roadway miles insideState highway office
US 77US highway7.4 roadway miles insideState highway office
Texas State Highway 6State highway11.7 roadway miles insideState highway office
Loop 340State highway6.1 roadway miles insideState highway office
FM 3148State highway4.2 roadway miles insideState highway office
FM 2837State highway2.4 roadway miles insideState highway office
FM 434State highway1.4 roadway miles insideState highway office
Loop 396Highway nearby1.3 miles outsideState highway office
Crow CreekStream5.47 channel miles insideChecked for Corps of Engineers jurisdiction
Flat CreekStream5.31 channel miles insideChecked for Corps of Engineers jurisdiction
Castleman CreekStream4.72 channel miles insideChecked for Corps of Engineers jurisdiction
Chambers CreekStream3.52 channel miles insideChecked for Corps of Engineers jurisdiction
Dry CreekStream2.3 channel miles insideChecked for Corps of Engineers jurisdiction
Cottonwood CreekStream2.13 channel miles insideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Robinson or within one mile outside its limits, and no street and rail crossings are mapped in the city. Crow Creek runs 5.47 channel miles inside Robinson, while Flat Creek runs 5.31 miles and Castleman Creek 4.72 miles. Public records map 32 street crossings of named streams in the city. We distinguish Crow Creek from mapped standing water; no lakes or ponds are mapped within one mile. For a Crow Creek crossing, the route is planned under the channel and checked for federal waterway jurisdiction.

Whose permission does a Robinson bore under Interstate 35 need?

On Interstate 35, electric and communication lines need at least 60 inches of cover below the lowest point of the crossed grade; water lines need the same cover, and pressurized sewer lines also need 60 inches. TxDOT rules require boring or tunneling beneath existing highway pavement, with casing at crossings. For Interstate 35 and other state highway rights of way in Robinson, the line owner applies through TxDOT’s RULIS system, and the TxDOT Waco District reviews it. We prepare the bore plan and profile for the owner’s application and work under its permit. Robinson city streets belong to the city. A Crow Creek crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Which utilities are near Robinson routes served by the City of Robinson?

The City of Robinson public water system uses surface water and reports 5,238 service connections serving 11,900 people. Electric service reported in McLennan County includes Oncor Electric Delivery Company, Texas New Mexico Power, HILCO Electric Cooperative, Heart of Texas Electric Cooperative and Navasota Valley Electric Cooperative. For an electric conduit bore along Old Robinson Road, we confirm the line owner at the specific address before planning. Near City of Robinson water lines or a route with county reported electric utilities, hydrovac potholing lets us check marked lines before the drill approaches.

Line ownerWhat it isSourceSize
City of RobinsonPublic water systemSurface water5,238 connections, 11,900 people served
Oncor Electric Delivery Company, Texas-New Mexico Power, HILCO Electric Cooperative, Heart of Texas Electric Cooperative and Navasota Valley Electric CooperativeElectric utilities reporting service in McLennan CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Robinson’s median housing year at 1990; we verify utilities before boring. The estimates show 4 percent of homes built before 1960, 63 percent built from 1960 to 1999 and 33 percent built in 2000 or later. A route near Old Robinson Road could involve replacement of an older line or a new service, and the age alone does not show what is buried. We expose marked utilities by hydrovac before drilling near them because locate paint shows position, not depth.

Coiled black HDPE conduit fitted with a pulling grip staged on a lawn along a completed bore path
Coiled HDPE conduit fitted with a pulling grip, staged on a lawn along a finished bore path.

Do you cover Robinson and the Waco area?

Robinson is in McLennan County, at an elevation of 458 feet, and covers 30.63 square miles. Robinson has ZIP codes 76706 and 76655; we use the site address to check utility records before boring. Hewitt is 4.2 miles west, Beverly Hills is 5.3 miles north, and Golinda is 6.5 miles southeast. Waco, the county seat and nearest larger city, is 8.3 miles northwest. Robinson is 307 road miles and a 5.9 hour drive from our Yukon, Oklahoma main office, so that distance is part of planning crew mobilization for work near Interstate 35 or Crow Creek.

Places near Robinson

Which jobs call for a bore near Moonlight Drive in Robinson?

  • Highway crossing: A water or conduit route under Interstate 35 needs a bore plan that accounts for TxDOT cover, casing and the right of way.
  • Water service: A new or replacement connection near Old Robinson Road can be routed beneath pavement instead of cutting across the street.
  • Fiber drop: A fiber route along Moonlight Drive can pass beneath driveways, with marked utilities exposed before the drill approaches.
  • Creek crossing: A route under Crow Creek is planned beneath the channel, with federal waterway jurisdiction checked during planning.
  • Electric conduit: Near Robinson Drive, we confirm the line owner before planning a conduit bore and pothole marked utilities along its path.
  • Street crossing: A route beneath Texas State Highway 6 can use pits on each side to leave the paved crossing uncut.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What should I send for a Robinson quote near Old Robinson Road?

For a Robinson quote, send the address or map pin, what will go in the ground, the pipe or conduit size and the footage. A sketch or plans help show whether the route meets Old Robinson Road, Interstate 35 or a creek. Those details let us see the likely bore path, access for the equipment and which crossings need to be planned.

The route scope drives the price. A short, clear run near Moonlight Drive is simpler to plan than a longer route through Houston Black clay with several utilities to expose. Pipe size, footage, pavement, creek crossings, pits, excavator time and sand backfill can all change the work. Interstate 35 right of way adds permit planning, while Robinson’s 307 road miles from Yukon affect mobilization. Near Loop 340, we account for extra coordination when high profile or emergency work changes the bore plan.

Questions people ask about boring in Robinson

Does Trinity take directional boring work in Robinson, McLennan County, and who staffs it?

Yes, we take directional boring work in Robinson, McLennan County, and staff it with our crews or crews from vetted drilling partners. Our Yukon main office is 307 road miles away. You work with Trinity from the first call through the bore log, whether a crew is working near Old Robinson Road or another Robinson route.

Does Houston Black soil in Robinson corrode steel, and what pipe should I use?

Robinson’s mapped soils show high steel corrosion risk across 91 percent of the area, so the line owner should weigh that when choosing steel casing or tracer wire materials. Houston Black soil is mapped across 31 percent of the city. HDPE avoids the soil corrosion concern, while the line owner selects any coating for steel.

What ground is under a Robinson bore near Houston Black soil?

The USDA soil survey maps Houston Black soil across 31 percent of Robinson, and clay covers 73 percent of the mapped area at about 40 inches below the surface. Average clay content at that depth is 49 percent. These are soil survey patterns, not test borings; near Robinson Drive, sticky clay can ball up on a reamer and grip the pipe.

Will a Robinson bore encounter rock, and how much bedrock is mapped in the top five feet?

Weathered bedrock is mapped within 60 inches across 15 percent of Robinson, with bedrock mapped within 40 inches across 4 percent. No hard bedrock is mapped within 60 inches. The local Silty Clay Decomposition Residuum includes chalk and limestone, so a bore near Crow Creek may meet weathered material even where hard bedrock is not mapped.

Who approves a Robinson bore under Interstate 35, and which TxDOT office reviews it?

The utility that owns the line submits the right of way application in TxDOT’s RULIS system, and the TxDOT Waco District reviews a Robinson Interstate 35 crossing. We prepare the bore plan and profile for that filing and work under the permit issued to the utility owner. TxDOT cover and casing requirements help set the bore depth.

Can a Robinson utility line be bored under Crow Creek?

A line can be planned beneath Crow Creek, which runs 5.47 channel miles inside Robinson. The crossing plan accounts for the channel and is checked for U.S. Army Corps of Engineers jurisdiction during planning. The creek route also affects bore length, pit placement and the plan for keeping the banks uncut.

Does Trinity cover Hewitt and rural sites outside Robinson?

Yes, we take work in Hewitt and at rural sites outside Robinson. Hewitt is 4.2 miles west of Robinson, and Waco is 8.3 miles northwest. Our crews work across Texas, with mobilization planned around the address and route, whether the job is near Moonlight Drive or beyond the city limits.

How much Texas811 notice do I need for a Robinson bore near Old Robinson Road?

For work near Old Robinson Road, submit a Texas811 locate request at least 48 hours before excavation, not counting Saturdays, Sundays or legal holidays, and no earlier than 14 days before the start. Texas811 describes this as at least two working days. If the start slips more than 14 days past the original notice, submit a new request; worn or moved marks must be refreshed through Texas811 before work continues.

What affects the cost of directional boring in Robinson near Interstate 35?

The job details set the price: length, pipe or conduit size, soil and rock, utilities to expose, pavement, creek crossings, pits and equipment time all matter. Houston Black clay can call for staged reaming, while a Crow Creek crossing adds planning. An Interstate 35 right of way bore needs permit coordination, and mobilization reflects Robinson’s 307 road miles from Yukon.

Where the Robinson facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Robinson

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Robinson, Texas

Type the address of your job in Robinson. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Robinson

Same county: Bellmead · Lacy-Lakeview · McGregor · West · Mart · Moody · Bruceville-Eddy · China Spring · Gholson · Riesel · Crawford · Hallsburg. All counties: Texas county list.