trinityboringsolutions.com

Westbrook Texas Directional Boring: Miles Soil, Interstate 20, Union Pacific Track

Quick Answer: On Interstate 20 and Westbrook streets, Trinity Boring Solutions handles directional boring, also called horizontal directional drilling (HDD), for water, sewer, gas, electric conduit and fiber routes. Thorne Street and Morrison Street are among the longest named roads within 11.45 public road miles inside the city. The Yukon main office is 359 road miles away, so work near the Union Pacific track needs mobilization planned around that distance. At about 40 inches, Miles soil is mostly sandy clay loam, which can cling to the reamer.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Westbrook bores at a glance

  • Incorporated city in Mitchell County, Texas. Population 204 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 359 miles, about 7.1 hours of driving.
  • Ground: Miles soil is mapped on 70 percent of the area, with sandy clay loam about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 15 percent of the area.
  • Highways inside the boundary: Interstate 20 and Interstate 20 Business. State permit office: TxDOT Abilene District.
  • Railroad track inside the boundary: Union Pacific.
  • Public water: City of Westbrook, groundwater bought from another system.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Which contractor handles directional boring near Thorne Street in Westbrook?

Trinity Boring Solutions takes directional boring work in Westbrook, Mitchell County, where the Census Bureau Vintage 2024 estimate is 204 residents. Thorne Street and Morrison Street lead Westbrook’s 11.45 public road miles, while Interstate 20 runs through the city. We install water, sewer, gas, electric conduit and fiber lines along these roads and beneath them when a route needs to avoid cutting the surface.

Our main office is in Yukon, Oklahoma, and Westbrook work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. For a short service line by Bertner Street, we use 3/4 inch; a larger casing route beneath Interstate 20 can reach 48 inch. Our family business started in 1965, and we have done directional boring since 1982, with the bore sized to the route.

Horizontal directional drill rig set up on an open grass field with support trucks and a vacuum excavation truck
Our horizontal directional drill set up in an open field with the support trucks and the vacuum excavation truck. Photos on this page are from our jobs in Oklahoma and Texas.

What does the soil survey show beneath Westbrook’s Miles soil?

The USDA soil survey maps Miles soil across 70 percent of Westbrook, with sandy clay loam mapped at about 40 inches below the surface across 70 percent of the city. That layer averages 31 percent clay, while clay is mapped in 13 percent of the area at that depth. These are mapped soil patterns, not test borings, so actual conditions along Thorne Street can vary. Sandy clay loam can hold a bore open, but its clay can stick to a reamer and grip pipe during pullback.

USDA soil survey, inside the Westbrook city limitsWhat is mapped
Soil series mappedMiles 70 percent, Bukreek 15 percent and Stamford 13 percent
Texture at the surfacefine sandy loam 72 percent, loam 15 percent and clay 13 percent
Texture about 40 inches downsandy clay loam 70 percent, clay loam 15 percent and clay 13 percent
Engineering class about 40 inches downclayey sand (SC) 70 percent, lean clay (CL) 15 percent and fat clay (CH) 13 percent
Average clay content about 40 inches down31 percent
Bedrock mapped within 60 inches15 percent of the area (2 percent hard rock, 13 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel13 percent of the area

Bedrock is mapped within five feet in 15 percent of Westbrook, including 2 percent mapped as hard bedrock and 13 percent as weathered bedrock; typical depth is 31 inches. Seasonal water table and flood prone soils are not mapped, but conditions can differ at a particular Bertner Street site. High steel corrosion risk is mapped in 13 percent of the area, so the line owner should consider casing and tracer wire materials. The USDA geology map includes Quaternary red siltstone and shale clast locally gypsiferous loamy colluvium and Triassic Dockum Group rocks, which can mean slower drilling where rock is encountered.

How is a bore run through Westbrook’s sandy clay loam?

At a Westbrook site with Miles sandy clay loam, we tune the drilling fluid and reaming sequence to manage sticky cuttings and keep the planned route beneath streets such as Thorne Street.

  1. On Miles soil, we use a thinner drilling mix with polymer to help manage sticky cuttings, then enlarge the hole in stages before pulling pipe.
  2. Because sandy clay loam makes up 70 percent of the mapped soil at about 40 inches, we have the pipe laid out before the final ream.
  3. At sites where the USDA map shows weathered siltstone or shale, we use a soil bit and allow for slower progress than in ordinary dirt.
  4. Before drilling near Thorne Street or the City of Westbrook water line, we expose each marked utility with hydrovac; a surface mark alone does not show depth.
Drilling fluid returns at the entry as the Vermeer D24x40 S3 drills a 385 foot sandstone rock bore in Guthrie, Oklahoma
Drilling fluid coming back to the entry pit as our Vermeer D24x40 drills a 385 foot bore in Guthrie, Oklahoma.

Where does a line have to go under Interstate 20 in Westbrook?

Westbrook has Interstate 20 and Interstate 20 Business within its limits, so a route crossing either highway needs a bore planned around the pavement and right of way. Thorne Street is the longest named street at 0.8 miles; Morrison Street and Hughes Street each cover 0.75 miles, and Bertner Street covers 0.71 miles. Together, these roads and the highway corridors shape where entry and exit pits can fit. There are 11.45 public road centerline miles in the city, so access and alignment need to be checked at the specific address.

CrossingTypeMapped extentWho has a say
Interstate 20Interstate1.7 roadway miles insideState highway office
Interstate 20 BusinessInterstate0.8 roadway miles insideState highway office
Union PacificRailroad0.32 track miles insideThe railroad
Swipe the table sideways to see every column.

Union Pacific has 0.32 track miles inside Westbrook on its Toyah Subdivision, but public records map no street and rail crossings in the city. A planned route that does pass beneath the track still needs railroad coordination. No streams are mapped inside or within one mile of the limits, and no lakes or ponds are mapped within one mile. With no named channel crossing shown for Westbrook, a bore along Morrison Street is more likely to be planned around road, rail and buried utility conflicts than a mapped water crossing.

Whose permission does a Westbrook bore near Union Pacific need?

For Westbrook, the city handles its streets, TxDOT handles Interstate 20 right of way through the Abilene District, and Union Pacific controls any crossing of its track. On Interstate 20, TxDOT cover rules set a minimum of 60 inches for electric and communication lines and water lines crossing below the lowest point of the crossed grade; pressurized sewer crossings also need 60 inches. The utility owner, not the drilling contractor, applies through TxDOT’s online RULIS system, and we prepare the bore plan and profile for its application. TxDOT rules require boring or tunneling beneath existing highway pavement, with casing at crossings and a bore extending beneath all travel lanes on rural highways. A Union Pacific crossing needs an agreement with the railroad that sets its crossing conditions.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Whose lines are already buried in Westbrook, Mitchell County?

The City of Westbrook public water system uses purchased groundwater and reports 150 service connections serving 221 people. Before potholing near a water route on Thorne Street, we identify the marked line and expose it before drilling close by. Oncor Electric Delivery Company, Big Country Electric Cooperative, Concho Valley Electric Cooperative and Taylor Electric Cooperative report electric service in Mitchell County; the line owner for the address is confirmed before an electric conduit bore near Interstate 20.

Line ownerWhat it isSourceSize
City of WestbrookPublic water systemGroundwater bought from another system150 connections, 221 people served
Oncor Electric Delivery Company, Big Country Electric Cooperative, Concho Valley Electric Cooperative and Taylor Electric CooperativeElectric utilities reporting service in Mitchell CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Westbrook’s median housing year at 1972; 31 percent of housing was built before 1960, 52 percent from 1960 to 1999 and 17 percent in 2000 or later. That mix can mean a Thorne Street project involves either replacement near older services or a new connection. Before the drill approaches any marked line, we use hydrovac potholing to expose it; locate paint shows position, not depth.

Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building
Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building.

Where is Westbrook in relation to Colorado City?

Westbrook is in Mitchell County, Texas, at an elevation of 2,167 feet and covers 0.42 square miles. We use ZIP code 79565 to identify Westbrook in underground project planning, since it serves the city. Lake Colorado City is 4.5 miles east, Colorado City is 9.5 miles east, Coahoma is 17.8 miles west, Loraine is 17.9 miles east and Sand Springs is 20.2 miles west. Colorado City is the county seat, while Snyder is 25.3 miles north. From our Yukon, Oklahoma main office, the road distance is 359 miles and the drive is 7.1 hours, which figures into mobilization for a Westbrook job.

Places near Westbrook

What boring work comes up near Morrison Street in Westbrook?

  • Highway crossing: A route beneath Interstate 20 needs a bore plan that clears the pavement and accounts for the TxDOT right of way.
  • Water service: A connection near the City of Westbrook system can be routed beneath Thorne Street without opening the street surface.
  • Fiber drop: A small conduit route along Morrison Street can connect a service while keeping pavement and driveways intact.
  • Rail crossing: A planned route under the Union Pacific Toyah Subdivision needs railroad coordination for its 0.32 track miles in the city.
  • Street utility: A sewer or electric conduit bore near Bertner Street starts with a route check and exposure of marked lines.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What should I send for a Westbrook quote near Bertner Street?

For a Westbrook quote, start with the address or map pin, such as a location on Bertner Street, then tell us what will go underground. Add the pipe or conduit size and footage, whether the route approaches Interstate 20 or Union Pacific track, and a sketch or plans if available. Those details help us understand the route before setting the work scope.

The price follows the Westbrook route and ground, with soil and rock first because Miles sandy clay loam can load the reamer and mapped weathered bedrock may slow a section. Next come length and pipe or conduit size, then the Interstate 20 or Union Pacific crossing requirements and the utilities that must be exposed. Concrete or pavement, pit work, excavator time, sand backfill and mobilization also matter; the Yukon office is 359 road miles away. A high profile or emergency job can change the planning and crew needs.

Questions people ask about boring in Westbrook

Does Trinity take directional boring jobs in Westbrook and Mitchell County?

Yes. Trinity Boring Solutions takes Westbrook work, with our own crews and partner contractor satellite yards that we have vetted. A job near Thorne Street is managed by Trinity from the initial call through the bore log, regardless of which crew is at the site.

What ground should I expect in Westbrook’s Miles soil?

The USDA soil survey maps Miles soil across 70 percent of Westbrook, with sandy clay loam across 70 percent at about 40 inches below the surface. That mapped layer averages 31 percent clay. It can hold a bore open, but cuttings may stick to the reamer, so the drilling sequence needs to suit the ground near Morrison Street.

Is there rock near the surface on a Westbrook bore?

Rock is mapped within five feet in 15 percent of Westbrook, with 13 percent mapped as weathered bedrock and 2 percent as hard bedrock. The survey gives a typical bedrock depth of 31 inches. Near Bertner Street, those are mapped conditions rather than a site test, so a specific route can encounter different ground.

Who approves a Westbrook bore beneath Interstate 20?

TxDOT reviews work in Interstate 20 right of way through its Abilene District. The utility owner submits the application in RULIS, while we provide the route plan and profile for that filing. For an electric or communication line crossing Interstate 20, the state rules set 60 inches of cover below the lowest point of the crossed grade.

For a bore under Union Pacific track in Westbrook, what requirements apply?

Union Pacific owns the 0.32 track miles mapped in Westbrook on the Toyah Subdivision. A bore under that track needs an agreement from the railroad; it determines crossing details such as casing, depth and flagging. We account for those conditions when laying out a route near the city’s streets.

Who runs Westbrook’s public water system, and where is its water sourced?

The City of Westbrook owns its public water system, which uses purchased groundwater. Public records list 150 service connections serving 221 people. For a water route near Thorne Street, marked utilities on the bore path are exposed before drilling near them.

What bore sizes and lengths can Trinity handle for a Westbrook job near Bertner Street?

Our range covers 3/4 inch service lines through 48 inch casing, with bore lengths from 10 feet to 5,000 feet. A short service connection near Bertner Street and a longer route beneath Interstate 20 call for different equipment and plans, so the proposed size and length shape the approach.

How much notice does Texas811 need for a Westbrook bore near Thorne Street?

For a bore near Thorne Street, request a Texas811 locate at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before the start. For work near Bertner Street in Westbrook, we make a new request if the start slips more than 14 days past the original notice. On Westbrook work near Interstate 20, we refresh worn or moved marks through Texas811 before work continues.

What affects the cost of a Westbrook directional bore under Interstate 20?

The route length, pipe or conduit size, Miles soil and any mapped rock all affect the work. A crossing beneath Interstate 20 can add permit planning, while marked utilities, pavement, pits and excavator time affect the setup. The 359 road miles from the Yukon office also factor into mobilization for Westbrook.

Where the Westbrook facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Westbrook

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Westbrook, Texas

Type the address of your job in Westbrook. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Westbrook

All counties: Texas county list.