trinityboringsolutions.com

Colorado City Texas Directional Boring: Miles Soil, Lone Wolf Creek And Union Pacific

Quick Answer: Trinity Boring Solutions handles directional boring, also called horizontal directional drilling (HDD), in Colorado City, Texas, including routes beneath Lone Wolf Creek. From our Yukon, Oklahoma main office, Colorado City is 350 road miles away, so work near Interstate 20 is staffed by our own crews or vetted partner crews from satellite yards. The USDA soil survey maps Miles soil across 63 percent of the city. Sandy clay loam below the surface can grip a pipe, so we plan the reaming and pull around that ground.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Colorado City bores at a glance

  • County seat of Mitchell County, Texas. Population 3,915 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 350 miles, about 6.9 hours of driving.
  • Ground: Miles soil is mapped on 63 percent of the area, with sandy clay loam about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 7 percent of the area.
  • Highways inside the boundary: Interstate 20, Interstate 20 Business, Texas State Highway 208, Texas State Highway 208 Business and FM 1983. State permit office: TxDOT Abilene District.
  • Railroad track inside the boundary: Union Pacific, with 4 mapped street and rail crossings.
  • Named streams inside the boundary: Lone Wolf Creek and Colorado River.
  • Public water: City of Colorado City, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who can I call for directional boring near Lone Wolf Creek in Colorado City?

Trinity Boring Solutions takes directional boring jobs in Colorado City, Mitchell County, including routes near Lone Wolf Creek. Colorado City is 350 road miles from our Yukon, Oklahoma main office, and we staff work with our own crews and vetted partner crews. The Census Bureau Vintage 2024 estimate puts Colorado City’s population at 3,915, so we size underground work to each project’s needs. We install water, sewer, gas, electric conduit and fiber lines for routes beneath Austin Street or alongside Interstate 20.

Our main office is in Yukon, Oklahoma, and Colorado City work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore is roughly 4,100 feet of 48 inch pipe under the Arkansas River in Tulsa. Against that reach, a Colorado City service line or a crossing beneath Lone Wolf Creek is a more typical scope. We have been a family business since 1965 and have done directional boring since 1982.

Aerial view of Trinity Boring Solutions crew and service van at a multifamily apartment underground utility jobsite in Oklahoma City
Our crew and service van at a multifamily underground utility job in Oklahoma City, seen from above. Photos on this page are from our jobs in Oklahoma and Texas.

What kind of ground does Miles soil mean for boring in Colorado City?

Miles soil is the main mapped soil series in Colorado City, covering 63 percent of the city according to the USDA soil survey. Fine sandy loam is the most common surface texture, mapped across 54 percent, and sandy clay loam is mapped at about 40 inches down across 71 percent. The survey also maps fine sand at that depth across 13 percent. Colorado City’s sandy clay loam survey patterns inform our initial boring plan, but they are not test borings and do not confirm site conditions. The sandy surface may cut readily, while the deeper clay can cling to a reamer and grip pipe.

USDA soil survey, inside the Colorado City city limitsWhat is mapped
Soil series mappedMiles 63 percent, Tivoli 13 percent, Latom 6 percent, Heatly 6 percent and Colorado 3 percent
Texture at the surfacefine sandy loam 54 percent, fine sand 20 percent and loamy fine sand 16 percent
Texture about 40 inches downsandy clay loam 71 percent, fine sand 13 percent and bedrock 7 percent
Engineering class about 40 inches downclayey sand (SC) 47 percent, lean clay (CL) 29 percent and silty sand (SM) 13 percent
Average clay content about 40 inches down25 percent
Bedrock mapped within 60 inches7 percent of the area (6 percent hard rock, 1 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils3 percent of the area
High corrosion risk for uncoated steel3 percent of the area

The USDA soil survey maps bedrock within 60 inches across 7 percent of Colorado City, and the typical mapped bedrock depth is 7 inches, so we check the actual route rather than assume uniform ground. Seasonal water tables are not mapped, while flood prone soils cover 3 percent. High steel corrosion risk is mapped across 3 percent, so the line owner should weigh casing and tracer wire materials. The Quaternary red siltstone and shale clast loamy colluvium includes shale and siltstone, and the Triassic Dockum Group adds another mapped rock unit.

How do we drill Colorado City’s sandy clay loam?

Colorado City’s sandy clay loam can hold a bore open but may cling to the tooling and pipe. We match the drilling fluid and reaming sequence to the route, including the ground near Lone Wolf Creek.

  1. On Miles soil, we match fluid and reaming stages to the sandy clay loam mapped below the surface, then have the pipe ready before opening the hole.
  2. Near mapped Quaternary siltstone and shale, we check the bore path as ground changes and use a suitable bit if the route meets softer rock.
  3. For a route near Lone Wolf Creek, we plan depth beneath the channel and review possible federal jurisdiction before setting the crossing approach.
  4. Before drilling close to Austin Street utilities, we hydrovac pothole each marked line; surface paint shows location, not burial depth.
Walkover locator held over a flowing creek while tracking the drill head on a 385 foot rock bore in Guthrie, Oklahoma
Tracking the drill head with a walkover locator over a flowing creek on a 385 foot bore in Guthrie, Oklahoma.

What is in the way of a new line in Colorado City near Union Pacific?

Colorado City has Interstate 20, Interstate 20 Business, Texas State Highway 208 and Texas State Highway 208 Business within its limits, along with FM 1983, FM 3525, Texas State Highway 163 and FM 3285. A bore beside Interstate 20 needs a route that accounts for highway pavement and right of way. Austin Street, 10th Street and 17th Street are among the longest named streets, so a service route may need to pass beneath pavement rather than disturb it.

CrossingTypeMapped extentWho has a say
Interstate 20Interstate4.6 roadway miles insideState highway office
Interstate 20 BusinessInterstate2.8 roadway miles insideState highway office
Texas State Highway 208State highway5.6 roadway miles insideState highway office
Texas State Highway 208 BusinessState highway1.6 roadway miles insideState highway office
FM 1983State highway1.9 roadway miles insideState highway office
FM 3525State highway0.8 roadway miles insideState highway office
Texas State Highway 163State highway0.7 roadway miles insideState highway office
FM 3285State highway0.5 roadway miles insideState highway office
Union PacificRailroad2.21 track miles insideThe railroad
Lone Wolf CreekStream2.3 channel miles insideChecked for Corps of Engineers jurisdiction
Colorado RiverStream1.69 channel miles insideChecked for Corps of Engineers jurisdiction
Bone HollowStream nearby0.6 miles outsideChecked for Corps of Engineers jurisdiction
Bone Hollow CreekStream nearby0.9 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

Union Pacific has 2.21 track miles inside Colorado City on the Union Pacific Toyah Subdivision, and public maps show 4 street and rail crossings in the city. A route beneath those tracks needs an agreement from the railroad that owns them; its terms set the crossing details. Lone Wolf Creek runs 2.3 channel miles in the city, and the Colorado River runs 1.69. Maps show 7 street crossings of named streams, so a creek route needs early review. No lakes or ponds are mapped within one mile, so we still check each Colorado City boring route against site conditions.

Who has to sign off on a Colorado City bore near Interstate 20?

Interstate 20 and the other state roads in Colorado City fall under TxDOT, with review by the TxDOT Abilene District. For work in highway right of way, the utility owner applies through TxDOT’s online RULIS system; we prepare the bore plan and profile and work under the owner’s permit. Existing highway pavement is bored or tunneled beneath, and the crossing is encased. A Union Pacific Toyah Subdivision crossing requires an agreement with Union Pacific, while a Lone Wolf Creek route is checked for possible U.S. Army Corps of Engineers jurisdiction during planning. Colorado City’s incorporated streets belong to the city.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

What is already in the ground near the City of Colorado City water system?

The City of Colorado City public water system draws from groundwater wells and reports 2,500 service connections serving 3,991 people. That makes water mains and service connections important to locate before a new bore near Austin Street or 17th Street. Electric service reported in Mitchell County includes Oncor Electric Delivery Company, Big Country Electric Cooperative, Concho Valley Electric Cooperative and Taylor Electric Cooperative. We confirm the line owner for the specific route before planning an electric conduit bore.

Line ownerWhat it isSourceSize
City of Colorado CityPublic water systemGroundwater wells2,500 connections, 3,991 people served
Oncor Electric Delivery Company, Big Country Electric Cooperative, Concho Valley Electric Cooperative and Taylor Electric CooperativeElectric utilities reporting service in Mitchell CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Colorado City’s median housing year at 1954, so we verify utility marks before boring. It estimates 75 percent of housing was built before 1960, 23 percent from 1960 to 1999, and 2 percent in 2000 or later. A replacement bore near 10th Street may cross older buried lines as well as newer services. We hydrovac pothole marked utilities on the bore path before drilling near them, since locate paint shows position but not depth.

Exposed underground utility line in a hand dug potholing pit before a directional bore in Oklahoma
An existing utility line exposed in a pothole before a directional bore in Oklahoma.

How far is Colorado City from Loraine and our Yukon office?

Colorado City is the county seat of Mitchell County in west Texas, at an elevation of 2,133 feet and covering 5.33 square miles. Its ZIP code is 79512. Lake Colorado City is 5.9 miles southwest, Loraine is 8.5 miles east, and Westbrook is 9.5 miles west. Hermleigh is 17.8 miles north and Roscoe is 19.2 miles east. Snyder, the nearest larger city, is 21.9 miles north. Our Yukon, Oklahoma main office is 350 road miles away, a 6.9 hour drive, which is part of planning crew mobilization for work near Interstate 20.

Places near Colorado City

What boring work comes up near 17th Street in Colorado City?

  • Highway crossing: A bore beneath Interstate 20 keeps the route under the highway pavement, with the utility owner handling the TxDOT right of way permit.
  • Water service: A new service near Austin Street can connect toward the City of Colorado City system after existing lines are located.
  • Fiber route: A conduit run near 17th Street can pass beneath pavement instead of opening a trench across the street.
  • Creek crossing: A line beneath Lone Wolf Creek needs a planned channel depth and a check for possible federal jurisdiction.
  • Rail crossing: A route beneath the Union Pacific Toyah Subdivision requires an agreement with Union Pacific before the crossing is set.
  • Street replacement: A replacement line along 10th Street can use a bore to avoid cutting the road surface.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What do you need to quote a bore near Austin Street in Colorado City?

For a bore near Austin Street, start with the address or a map pin so we can place the route. Tell us what is going underground, such as a water line near the City of Colorado City system or fiber near Interstate 20. We also need the pipe or conduit size and the footage. A sketch or plans help show crossings and access.

The route and scope drive the price, not footage alone. Miles soil and sandy clay loam affect drilling and reaming, while a Union Pacific crossing or a route under Lone Wolf Creek adds crossing work. We also account for pipe size, exposed utilities, pavement, pits, sand backfill and excavator time. Colorado City is 350 road miles from Yukon, so mobilization matters too; emergency timing or a high profile route can change the work plan.

Questions people ask about boring in Colorado City

Does Trinity Boring Solutions take directional boring work in Mitchell County, including Colorado City?

Yes. We take directional boring work in Colorado City and across Mitchell County, with our own crews and partner crews from vetted satellite yards. The Yukon, Oklahoma main office is 350 road miles away, but you work with Trinity from the first call through the bore log, whichever crew is on site.

Can you bore under Lone Wolf Creek in Colorado City?

A bore under Lone Wolf Creek can be planned around the channel, with the route and depth checked for the site. The creek runs 2.3 channel miles within Colorado City, and planning includes checking possible U.S. Army Corps of Engineers jurisdiction. Access and ground conditions still need review for the specific crossing.

Who runs Colorado City’s public water system, and where does its water come from?

The City of Colorado City owns the public water system, which uses groundwater wells. It reports 2,500 service connections and 3,991 people served. Those water mains and service lines are important to locate before a new bore near Austin Street or 17th Street.

Which electric companies report service in Mitchell County near Colorado City, and who confirms conduit specs?

Oncor Electric Delivery Company, Big Country Electric Cooperative, Concho Valley Electric Cooperative and Taylor Electric Cooperative report electric service in Mitchell County. The line owner for the specific Colorado City address needs to be confirmed before a conduit bore, and that owner can confirm its conduit requirements.

Who controls Colorado City’s 17th Street, and can a new line avoid cutting it?

Colorado City is incorporated, so 17th Street is a city street. A directional bore can pass beneath the paved route instead of cutting the street surface, subject to the site plan and utility locations. Before drilling in Colorado City, we expose marked utilities so we can account for identified lines in the boring path.

What does older housing near 10th Street mean for a replacement bore in Colorado City?

Colorado City’s median housing year is 1954, and the American Community Survey estimates 75 percent of housing was built before 1960. A replacement route near 10th Street may meet older buried lines as well as later services. We pothole marked utilities on the bore path before drilling close to them.

How much notice does Texas811 need for a bore near Austin Street in Colorado City?

For an Austin Street bore, request a Texas811 locate at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before. The ticket covers a 20 day period from the original notice. If marks wear off or move, request refreshed marks through Texas811 before work continues.

Does Colorado City’s distance from Yukon change a job near Snyder?

Colorado City is 350 road miles and a 6.9 hour drive from our Yukon, Oklahoma main office, so we coordinate travel before scheduling boring. Snyder is 21.9 miles north of Colorado City, but a Snyder area job does not change that distance from Yukon. The trip is included in mobilization planning for a Colorado City bore.

What affects the cost of a directional bore under Interstate 20 in Colorado City?

The route, length, pipe size and ground conditions all affect a bore under Interstate 20. Miles soil and sandy clay loam influence drilling, while highway pavement, utility exposures and permit planning add job requirements. A Union Pacific or Lone Wolf Creek crossing, pits, equipment time and mobilization from Yukon can also change the scope.

Where the Colorado City facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Colorado City

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Colorado City, Texas

Type the address of your job in Colorado City. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Colorado City

All counties: Texas county list.