trinityboringsolutions.com

Bishop Texas Directional Boring: Victoria Clay, Carretta Creek and Union Pacific

Quick Answer: Victoria clay is the main ground in Bishop, and it can grip a reamer and pipe. We take directional boring, also called horizontal directional drilling (HDD), work in Bishop, Texas for routes beneath US 77 and Carretta Creek. From our Yukon, Oklahoma main office, Bishop is 606 road miles away, with Union Pacific track among the local crossings to plan around. Victoria soil holds an open hole, but sticky cuttings call for staged reaming and a same day pull.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Bishop bores at a glance

  • Incorporated city in Nueces County, Texas. Population 3,057 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 606 miles, about 11.8 hours of driving.
  • Ground: Victoria soil is mapped on 97 percent of the area, with clay about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: US 77, US 77 Business, FM 70 and FM 257. State permit office: TxDOT Corpus Christi District.
  • Railroad track inside the boundary: Union Pacific, with 10 mapped street and rail crossings.
  • Named streams inside the boundary: Carretta Creek.
  • Public water: City of Bishop, surface water bought from another system.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Does anyone handle directional boring near Carretta Creek in Bishop?

Trinity Boring Solutions takes directional boring work in Bishop, Nueces County, including routes near Carretta Creek. Victoria clay is the main ground; it can stay open but stick to the reamer. The Census Bureau Vintage 2024 estimate puts Bishop at 3,057 people, and we install water, sewer, gas, electric conduit and fiber on routes along 6th Street or beneath US 77.

Our main office is in Yukon, Oklahoma, and Bishop work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore is roughly 4,100 feet of 48 inch pipe under the Arkansas River in Tulsa; that reach backs smaller water, sewer or conduit runs near Bishop’s 4th Street, with the family business dating to 1965 and directional boring work to 1982.

Ditch Witch JT922 compact directional drill beside the Trinity Boring Solutions truck at NE 24th Street in Oklahoma City
Our Ditch Witch JT922 compact directional drill beside the Trinity truck on a sleeve bore at NE 24th Street in Oklahoma City. Photos on this page are from our jobs in Oklahoma and Texas.

What is Victoria soil like to bore in Bishop?

The USDA soil survey maps Victoria soil across 97% of Bishop, with Victoria clay, 0 to 1 percent slopes covering 94% and Victoria clay, 1 to 3 percent slopes another 4%. At about 40 inches below the surface, clay is mapped across 99% of the city area, and average clay content there is 60%. We treat mapped patterns in Bishop as planning context, not test borings along any proposed bore path. The sticky, heavy clay can ball on a reamer and grip pipe, so a bore near 6th Street needs controlled fluid and staged enlargement.

USDA soil survey, inside the Bishop city limitsWhat is mapped
Soil series mappedVictoria 97 percent
Texture at the surfaceclay 99 percent
Texture about 40 inches downclay 99 percent
Engineering class about 40 inches downfat clay (CH) 99 percent
Average clay content about 40 inches down60 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches2 percent of the area
Flood prone soils2 percent of the area
High corrosion risk for uncoated steel99 percent of the area

The USDA soil survey does not map bedrock within the top five feet of Bishop, though that does not rule out deeper rock. Seasonal water table and flood prone soils each cover 2% of the mapped area, so creek side pits may need pumping and a channel crossing needs depth planning. High steel corrosion risk covers 99%, making casing and tracer wire material a line owner decision. The geologic map includes the Pleistocene Beaumont Formation, areas predominantly clay, and Late Pleistocene Delta Silt And Clay; both reinforce the need to manage sticky cuttings.

How do we drill Bishop clay around 6th Street?

We drill Bishop’s Victoria clay with controlled fluid and staged reaming, because the mapped heavy clay can cling to the tool and pipe along 6th Street routes.

  1. We use thinner drilling fluid with polymer in Victoria clay, then enlarge the hole in stages so sticky cuttings do not pack the reamer near 6th Street.
  2. We watch fluid returns closely in Bishop’s heavy clay, keeping pressure controlled near pavement so fluid does not lift the surface along Main Street.
  3. Before drilling near a marked line on 4th Street, we hydrovac expose it; locate paint shows its position but not its depth.
  4. We track the drill head from the surface and log depth and pitch on a Carretta Creek approach, planning the path below the channel.
Open bore pit in red Oklahoma dirt with white PVC conduit stub ups and an orange safety barrier
An open bore pit in red Oklahoma dirt with PVC conduit stubbed up and a safety barrier around it.

What might a bore have to cross on 6th Street in Bishop?

Bishop bores may need to pass beneath US 77, US 77 Business, FM 70 or FM 257 without cutting the roadway. US 77 Bypass runs 1.1 miles outside the city limits, so a job near that route may involve a different road owner. Within Bishop, 6th Street runs 1.61 miles, while Main Street and 4th Street each run 1.47 miles. A route using those streets can be planned with entry and exit pits off the pavement, subject to the road owner’s requirements.

CrossingTypeMapped extentWho has a say
US 77US highway2.5 roadway miles insideState highway office
US 77 BusinessUS highway1.7 roadway miles insideState highway office
FM 70State highway1.6 roadway miles insideState highway office
FM 257State highway0.9 roadway miles insideState highway office
US 77 BypassHighway nearby1.1 miles outsideState highway office
Union PacificRailroad2.24 track miles insideThe railroad
Carretta CreekStream1.07 channel miles insideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

Union Pacific has 2.24 track miles inside Bishop on its Brownsville Subdivision, and public mapping shows 10 street and rail crossings in the city. A route under those tracks needs an agreement from Union Pacific that sets the crossing conditions. Carretta Creek runs 1.07 channel miles in Bishop, with two mapped street crossings of named streams. Creek work needs channel depth planning, and mapped lakes and ponds are absent within one mile.

Whose approval does a bore need in Nueces County near Bishop?

For a bore affecting US 77, US 77 Business, FM 70 or FM 257, TxDOT reviews the state right of way work through its Corpus Christi District. The utility owner, not the drilling contractor, submits the utility permit application in TxDOT’s online RULIS system; we prepare the bore plan and profile for that filing. Existing highway pavement is bored or tunneled beneath, and rural crossings extend below all travel lanes. Bishop’s city streets, including 6th Street, belong to the city. A Union Pacific track crossing needs the railroad’s agreement, while Carretta Creek is checked for Corps jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Which lines should we expect near the City of Bishop system?

The City of Bishop public water system uses purchased surface water and lists 1,247 service connections serving 3,103 people. Near a water line route on Main Street, we locate and expose marked utilities before the drill approaches. A conduit bore also needs the line owner confirmed: AEP Texas Central, Nueces Electric Cooperative and San Patricio Electric Cooperative report electric service in Nueces County, but that does not identify the provider at every Bishop address.

Line ownerWhat it isSourceSize
City of BishopPublic water systemSurface water bought from another system1,247 connections, 3,103 people served
AEP Texas Central, Nueces Electric Cooperative and San Patricio Electric CooperativeElectric utilities reporting service in Nueces CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Bishop’s median housing year at 1971; 38% of housing was built before 1960, 49% from 1960 to 1999 and 13% in 2000 or later. That mix can mean replacing older lines as well as adding new services along 4th Street. We hydrovac pothole marked utilities on the route before drilling near them, since paint shows position, not depth. Near the City of Bishop water system, that helps verify the crossing before the bore begins.

Trinity Boring Solutions crew running a 2 inch conduit directional bore with airport hangars and a parked jet in the background in Oklahoma City
Our crew running a 2 inch conduit bore near the hangars at an Oklahoma City airport.

Do you cover Bishop, Driscoll and nearby areas?

Bishop is an incorporated city in Nueces County, 39.9 miles west of county seat Corpus Christi. It covers 2.41 square miles, sits at an elevation of 59 feet and uses ZIP code 78343. Kingsville is 6.5 miles southwest, and Driscoll is 6.7 miles northeast. Kingsville is also the nearest larger city, with a population of 24,884. Bishop is 606 road miles and an 11.8 hour drive from our Yukon, Oklahoma main office, so distance is part of planning a crew mobilization for a local bore.

Places near Bishop

What could we bore near 4th Street in Bishop?

  • Highway crossing: A bore beneath US 77 keeps the pavement intact, with the utility owner arranging the TxDOT right of way permit.
  • Water service: A service near the City of Bishop system can run beneath 4th Street, with marked crossings exposed before drilling.
  • Fiber route: A conduit bore along Main Street needs the electric and communications lines on its route identified and pothole checked.
  • Creek crossing: A Carretta Creek bore needs a planned profile below the channel and a check for Corps jurisdiction during planning.
  • Rail crossing: A route beneath Union Pacific track in Bishop needs an agreement with the railroad before the crossing is built.
  • Local road bore: Work beneath 6th Street can leave the street uncut, with pits placed in dirt on either side.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

How do I get a quote for a Bishop bore near US 77?

For a Bishop quote, share the address or map pin, what is going underground, the pipe or conduit size and the expected footage. For example, a route near US 77 needs a clear starting point and a line description. A sketch or plans showing the approach to 4th Street or Carretta Creek can help us understand access and crossings before we plan the bore.

A short run through Victoria clay with clear access can be simpler to plan than a route under US 77 or Union Pacific track. Price reflects footage, pipe or conduit size, soil, utility crossings and exposures, pavement, creek work, pits, excavator time and sand backfill. Carretta Creek can add crossing planning, while Bishop’s 606 road miles from Yukon affect mobilization. For a Bishop crossing, high profile or emergency work can change the scope we plan.

Questions people ask about boring in Bishop

Can Trinity take a directional boring job in Bishop, Nueces County, and who will be on site?

Yes, we take directional boring work in Bishop, Nueces County. We use our own crews or crews from vetted partner drilling contractors, while you work with Trinity through the job. A planned bore near Carretta Creek still starts with the route, line size and site access, so we can match the crew and equipment to the scope.

Who controls 4th Street in Bishop, and can a bore avoid cutting it?

Bishop’s city streets are under city control, including 4th Street. A directional bore can pass beneath the road with entry and exit pits off the pavement, subject to city approval. If a route instead reaches US 77, TxDOT handles the state right of way permit through its Corpus Christi District.

Do older buried lines near Main Street affect replacement bores in Bishop?

They can affect planning, since the American Community Survey 2019 to 2023 estimates put Bishop’s median housing year at 1971, with 38% of housing built before 1960. A replacement line near Main Street may have existing utilities close by. We expose marked lines along the bore path before drilling near them.

Does Victoria soil in Bishop create a corrosion concern for steel pipe?

Yes, the USDA soil survey maps high steel corrosion risk across 99% of Bishop. That makes material choices for steel casing and tracer wire worth reviewing with the line owner. The mapped ground is mostly Victoria clay, while HDPE avoids the soil corrosion concern associated with steel.

What ground does a bore pass through about 40 inches down in Bishop’s Victoria soil?

The USDA soil survey maps clay across 99% of Bishop at about 40 inches below the surface, with average clay content of 60%. Victoria is the dominant soil series. Heavy clay can stick to a reamer and grip pipe, so a bore near 6th Street may need staged reaming and controlled fluid.

Is a Bishop bore likely to hit rock below Carretta Creek?

Bedrock is not mapped in Bishop’s top five feet, but that does not rule out deeper rock beneath Carretta Creek. The geologic map shows the Pleistocene Beaumont Formation, areas predominantly clay, and Late Pleistocene Delta Silt And Clay. We read Bishop’s mapped clay and silt units as guidance, not a description of every bore path.

Can you take boring work around Kingsville and rural sites near Bishop?

We take work across Texas, including requests around Bishop, Kingsville and nearby rural sites. Kingsville is 6.5 miles southwest of Bishop, and Driscoll is 6.7 miles northeast. A route outside the city limits still needs its exact road, utility and access details checked before we set a drilling plan.

How much notice does Texas811 need before a bore near 6th Street in Bishop?

For a bore near 6th Street, submit the Texas811 locate request at least two working days before excavation, which is at least 48 hours excluding Saturdays, Sundays and legal holidays. Do not submit it earlier than 14 days before the start. If the start slips more than 14 days past the original notice, make a new request; refresh worn or moved marks through Texas811 before work continues.

What affects the price of directional boring near US 77 in Bishop?

The price depends on the route and scope near US 77, not one single measurement. Length, pipe size, Victoria clay, exposed utility crossings, pavement, creek work, pits and equipment time all affect the plan. A Union Pacific crossing or mobilization from the Yukon office also changes what the job requires.

Where the Bishop facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Bishop

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Bishop, Texas

Type the address of your job in Bishop. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page