trinityboringsolutions.com

Sandy Hollow-Escondidas Texas Directional Boring: Aransas Clay, FM 3088 and Nueces River

Quick Answer: The Nueces River is a major crossing concern, and Trinity Boring Solutions handles directional boring, also called horizontal directional drilling (HDD), in Sandy Hollow-Escondidas, Texas. FM 3088 is inside the mapped community, and the Yukon main office is 580 road miles away, so access and mobilization belong in the plan. Aransas clay is a key ground factor: the USDA survey maps it across 30 percent, and sticky cuttings can load a reamer. At Sandy Hollow Creek, we plan pit access for wet ground and check water crossing jurisdiction.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Sandy Hollow-Escondidas bores at a glance

  • Unincorporated community in Nueces County, Texas. Population 342 (2020 Census count).
  • Road distance from our Yukon, Oklahoma main office: 580 miles, about 11.5 hours of driving.
  • Ground: Aransas soil is mapped on 38 percent of the area, with clay about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: FM 3088, FM 70 and FM 666. State permit office: TxDOT Corpus Christi District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Nueces River, Sandy Hollow Creek, Cayamon Creek and Javelin Creek.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Which contractor handles boring near the Nueces River in Sandy Hollow-Escondidas?

Trinity Boring Solutions takes directional boring work in Sandy Hollow-Escondidas, Nueces County, where the 2020 Census counted 342 people in this unincorporated community. The Nueces River is a major crossing feature; we install water, sewer, gas, electric conduit and fiber beneath Easley Lane or FM 70 when the route and line owner allow. The river and street crossings make the bore path a key part of the plan.

Our main office is in Yukon, Oklahoma, and Sandy Hollow-Escondidas work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore was roughly 4,100 feet of 48 inch pipe under the Arkansas River in Tulsa. That reach is larger than many service routes; for an Oak Lane bore, line size, ground and access shape the plan. Our family business began in 1965, and we have done directional boring since 1982; planning work here means accounting for 580 road miles from our Yukon main office.

Trinity Boring Solutions Vermeer D24x40 directional drill set up for a bore
Our Vermeer D24x40 directional drill set up for a bore. Photos on this page are from our jobs in Oklahoma and Texas.

What kind of ground does Aransas soil mean for Sandy Hollow-Escondidas bores?

Aransas soil is the largest mapped soil series in Sandy Hollow-Escondidas, covering 38 percent of the community according to the USDA soil survey. The survey also maps Sinton at 17 percent, Odem at 12 percent and Papalote at 11 percent. At about 40 inches below the surface, clay accounts for 41 percent of mapped texture, while sandy clay loam accounts for 22 percent. Heavy clay is mapped across 58 percent at that depth, so expect sticky cuttings and plan reaming accordingly.

USDA soil survey, inside the Sandy Hollow-Escondidas mapped community boundaryWhat is mapped
Soil series mappedAransas 38 percent, Sinton 17 percent, Odem 12 percent, Papalote 11 percent and Pits (miscellaneous area) 6 percent
Texture at the surfaceclay 40 percent, fine sandy loam 18 percent and sandy clay loam 17 percent
Texture about 40 inches downclay 41 percent, sandy clay loam 22 percent and fine sandy loam 14 percent
Engineering class about 40 inches downfat clay (CH) 45 percent, clayey sand (SC) 19 percent and lean clay (CL) 16 percent
Average clay content about 40 inches down33 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches39 percent of the area
Flood prone soils67 percent of the area
High corrosion risk for uncoated steel59 percent of the area

The USDA soil survey maps seasonal water tables within 60 inches across 39 percent of Sandy Hollow-Escondidas and flood prone soils across 67 percent, so pits near the Nueces River may need pumping and careful placement. High steel corrosion risk is mapped across 59 percent; the line owner should weigh casing and tracer wire materials. Bedrock is not mapped in the top five feet, though deeper rock is not ruled out. The mapped alluvial sand, silt, clay, and gravel unit is Holocene, with mixed grain sizes that can change along a bore.

How do we plan a bore through Sandy Hollow-Escondidas clay in Aransas soil?

The mapped heavy clay around Sandy Hollow-Escondidas can cling to tooling, while seasonal water can fill pits. We match fluid, reaming and pit setup to the route near Aransas soil and local drainage.

  1. In Aransas heavy clay, we use a thinner fluid with polymer and ream in stages, then pull pipe the same day the hole is opened.
  2. Where the mapped seasonal water table could affect pits near the Nueces River, we keep pits small and pump water as needed.
  3. Along FM 3088, every marked utility on the planned path is exposed with hydrovac before the drill approaches; surface marks do not show depth.
  4. As the bore advances through changing alluvial layers, we track the head from the surface and log depth and pitch at each rod.
Open bore pit in red Oklahoma dirt with white PVC conduit stub ups and an orange safety barrier
An open bore pit in red Oklahoma dirt with PVC conduit stubbed up and a safety barrier around it.

Where might a line go under FM 3088 in Sandy Hollow-Escondidas?

A route in Sandy Hollow-Escondidas may need to pass beneath FM 3088, FM 70 or FM 666, all state highways within the mapped community. The mapped road mileage includes 5.2 miles of FM 3088, 2.9 miles of FM 70 and 2.1 miles of FM 666. Easley Lane is the longest named street at 1.34 miles, followed by Sandy Hollow at 0.91 miles and Oak Lane at 0.83 miles. A bore can keep pavement intact while reaching service lines along those roads.

CrossingTypeMapped extentWho has a say
FM 3088State highway5.2 roadway miles insideState highway office
FM 70State highway2.9 roadway miles insideState highway office
FM 666State highway2.1 roadway miles insideState highway office
Nueces RiverStream19.84 channel miles insideChecked for Corps of Engineers jurisdiction
Sandy Hollow CreekStream2.31 channel miles insideChecked for Corps of Engineers jurisdiction
Cayamon CreekStream1.1 channel miles insideChecked for Corps of Engineers jurisdiction
Javelin CreekStream0.92 channel miles insideChecked for Corps of Engineers jurisdiction
Round LakeLake or pond33 acres, nearbyChecked for Corps of Engineers jurisdiction
Lilly LakeLake or pond18 acres, insideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Sandy Hollow-Escondidas or within one mile outside the boundary, and no street and rail crossing is mapped. The Nueces River runs 19.84 channel miles inside the community; Sandy Hollow Creek, Cayamon Creek and Javelin Creek are also mapped. Six mapped street crossings intersect named streams. Lilly Lake lies inside the boundary and Round Lake is nearby, so a proposed water crossing needs a jurisdiction check during planning.

Do I need a permit for a Sandy Hollow-Escondidas bore in Nueces County?

Sandy Hollow-Escondidas has no city government, so street authority and permits rest with Nueces County or the state, depending on the road. For work in the right of way on FM 3088, FM 70 or FM 666, the line owner files the TxDOT utility application through RULIS; we prepare the bore plan and profile for that filing. TxDOT Corpus Christi District reviews it. TxDOT cover rules vary by line type, including 60 inches at highway crossings for electric, communication and water lines, with the permit able to set another depth.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Who owns lines serving Sandy Hollow-Escondidas in Nueces County?

The water provider for a specific Sandy Hollow-Escondidas address must be confirmed with the county or local water district before a bore is planned. EPA drinking water records do not tie a system to this community, so the address needs checking rather than an assumption about service. AEP Texas Central, Nueces Electric Cooperative and San Patricio Electric Cooperative report electric service in Nueces County. We confirm the line owner for the route before planning an electric conduit bore.

Line ownerWhat it isSourceSize
AEP Texas Central, Nueces Electric Cooperative and San Patricio Electric CooperativeElectric utilities reporting service in Nueces CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put the median housing year in Sandy Hollow-Escondidas at 1982, with all surveyed housing units built from 1960 to 1999. That age can mean replacement routes as well as new service work along Easley Lane or Oak Lane. Before drilling near a marked line, we expose it with hydrovac potholing; paint shows its position, not its depth.

Reel of yellow polyethylene gas pipe on a trailer staged for a directional bore
A reel of yellow polyethylene gas pipe on a trailer, staged for a directional bore.

What is near Sandy Hollow-Escondidas and San Patricio?

Sandy Hollow-Escondidas is in Nueces County, covers 7.86 square miles and sits at an elevation of 19 feet. In Nueces County, we account for ZIP codes 78383 and 78380 when planning underground work. San Patricio is 4.3 miles northeast, Sandia is 7.6 miles northwest, Edroy is 8.0 miles east, Orange Grove is 8.6 miles west and Rancho Banquete is 8.6 miles south. Robstown is the nearest larger city at 12.3 miles southeast; Corpus Christi, the county seat, is 40.2 miles east. From Yukon, the route is 580 road miles and about an 11.5 hour drive.

Places near Sandy Hollow-Escondidas

What boring work comes up along Sandy Hollow in Sandy Hollow-Escondidas?

  • Highway crossing: A water, electric or communication line beneath FM 3088 needs a planned bore under the roadway and its travel lanes.
  • Water service: A route near Oak Lane needs the address level water provider confirmed before we size the service bore.
  • Creek crossing: A line beneath Sandy Hollow Creek needs a depth plan for the channel and a jurisdiction check during planning.
  • Fiber conduit: A run along Easley Lane can pass beneath pavement and driveways without opening a trench across the traveled surface.
  • Street replacement: A sewer or water line beneath Sandy Hollow can be installed by bore where the route and existing utilities allow.
  • Drainage crossing: A bore near Lilly Lake needs pit placement that accounts for mapped wet ground and the shoreline route.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

How do I get a quote for an Easley Lane bore in Sandy Hollow-Escondidas?

For an Easley Lane quote, send the address or map pin, what will go in the ground, the pipe or conduit size and footage; a sketch or plans help. The route matters because Easley Lane runs 1.34 miles inside the mapped community, and nearby utilities may change the bore path.

The 580 road miles from Yukon shape mobilization for Sandy Hollow-Escondidas work. Aransas clay can affect drilling and reaming, while a crossing under FM 3088 adds highway planning. Creek crossings at the Nueces River or Sandy Hollow Creek may require different pit placement and jurisdiction review. Pipe size, bore length, marked utilities to expose, pavement, pit work, excavator time and sand backfill also affect the scope. High profile or emergency work can add planning demands, and we account for the TxDOT Corpus Christi District in permit planning.

Questions people ask about boring in Sandy Hollow-Escondidas

Does Trinity take directional boring jobs in Sandy Hollow-Escondidas, Nueces County, and who staffs them?

Yes. We take work in Sandy Hollow-Escondidas and manage the job from the first call through the bore log. Our own crews or crews from partner drilling contractors we have vetted may handle the field work. The Nueces River and FM 70 are examples of local features that can shape access and the route.

Who controls Oak Lane in Sandy Hollow-Escondidas, and can we avoid cutting the street?

Nueces County or the state has road authority because Sandy Hollow-Escondidas has no city government. A bore can pass under Oak Lane without opening the pavement when the route and site conditions allow. The responsible authority depends on the road, so identify the crossing before planning the work.

Does older housing along Sandy Hollow mean replacement bores are likely in Sandy Hollow-Escondidas?

The American Community Survey 2019 to 2023 estimates put the median housing year at 1982, and all surveyed housing units date from 1960 to 1999. That age makes replacement service work a reasonable project type, but it does not establish the age or location of any buried line along Sandy Hollow.

Can groundwater or flood prone soil affect bore pits near the Nueces River in Sandy Hollow-Escondidas?

Yes. The USDA soil survey maps seasonal water tables within 60 inches across 39 percent of Sandy Hollow-Escondidas and flood prone soils across 67 percent. Near the Nueces River, we plan pit locations for wet ground and may need to pump water. A proposed river crossing also gets a jurisdiction check during planning.

Can Aransas soil corrode steel on a Sandy Hollow-Escondidas bore, and what pipe should I use?

The USDA soil survey maps high steel corrosion risk across 59 percent of Sandy Hollow-Escondidas. The line owner chooses materials and any coating for steel casing or tracer wire. With Aransas soil in the local profile, HDPE is not affected by that soil corrosion concern, so we can plan material selection accordingly. The mapped Aransas clay is one reason to confirm material choices for the specific route.

What ground will a bore pass through in Aransas soil in Sandy Hollow-Escondidas?

The USDA soil survey maps Aransas across 38 percent of the community. At about 40 inches down, clay is the leading mapped texture at 41 percent, and sandy clay loam accounts for 22 percent. Those are survey patterns, not test borings, so the actual route can vary near FM 666 or a creek.

How much Texas811 notice do I need for an Easley Lane bore in Sandy Hollow-Escondidas?

Paint along Easley Lane shows line position, not depth, so marked utilities on the bore path must be exposed before drilling near them. Texas law requires a locate request at least 48 hours before excavation, excluding weekends and legal holidays, and no earlier than 14 days ahead. If marks wear off or move, request refresh through Texas811 before work continues.

How far is Sandy Hollow-Escondidas from the Yukon office, and does Robstown affect the job?

The Yukon main office is 580 road miles from Sandy Hollow-Escondidas, about an 11.5 hour drive. Robstown is 12.3 miles southeast and is the nearest larger city, but the Yukon distance can affect mobilization. The site address, access and route near FM 3088 help define the work plan.

What affects the price of a directional bore near FM 3088 in Sandy Hollow-Escondidas?

The price depends on the route and scope, not only its length. Aransas clay, pipe or conduit size, footage, utility exposures and pavement affect the work. A crossing under FM 3088 or a creek can add planning, while pits, excavator time, backfill and the 580 road miles from Yukon can also change mobilization needs.

Where the Sandy Hollow-Escondidas facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Sandy Hollow-Escondidas

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Sandy Hollow-Escondidas, Texas

Type the address of your job in Sandy Hollow-Escondidas. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Sandy Hollow-Escondidas

Same county: Corpus Christi · Port Aransas · Bishop · North San Pedro · Banquete · Agua Dulce · Driscoll · Spring Gardens · La Paloma-Lost Creek · Tierra Grande · Tierra Verde · Petronila. All counties: Texas county list.