Carlsbad Texas Directional Boring: Cho Gravelly Loam, US 87, North Concho River
Quick Answer: Can you get a line under US 87 without cutting it? Yes, we use directional boring, or horizontal directional drilling (HDD), for Carlsbad utility crossings. Carlsbad is 391 road miles from our Yukon, Oklahoma main office, and 8th Street is one local route to assess. Cho gravelly loam covers 43 percent of the mapped area, so gravel can push the drill head off line. We check each marked utility before drilling near 8th Street.
Carlsbad bores at a glance
- Unincorporated community in Tom Green County, Texas. Population 622 (2020 Census count).
- Road distance from our Yukon, Oklahoma main office: 391 miles, about 7.7 hours of driving.
- Ground: Cho soil is mapped on 43 percent of the area, with gravelly loam about 40 inches down.
- Rock: no bedrock is mapped in the top 60 inches.
- Highways inside the boundary: US 87. State permit office: TxDOT San Angelo District.
- Railroad track inside the boundary: none mapped.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who handles directional boring under US 87 in Carlsbad?
Trinity Boring Solutions takes directional boring work in Carlsbad, Tom Green County, where the 2020 Census counted 622 residents; the Census Bureau does not publish yearly estimates for unincorporated places. Can you get a line under US 87 without cutting it? Yes, we can plan a bore for water, sewer, gas, electric conduit or fiber beneath the highway or along 8th Street, with the route set to the job.
Our main office is in Yukon, Oklahoma, and Carlsbad work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. A 3/4 inch service line for a Main Street property is at the small end of our work, while a 48 inch casing suits a larger route; bore lengths range from 10 feet to 5,000 feet. Our family business began in 1965 and has done directional boring since 1982, with Carlsbad work handled through that Texas service network.

What is Cho soil like to bore in Carlsbad?
The USDA soil survey maps Cho soil across 43 percent of Carlsbad, with Angelo at 21 percent, Tulia at 20 percent and Mereta at 14 percent. Cho gravelly loam is the leading mapped soil unit. At about 40 inches below the surface, gravelly loam covers 43 percent of the mapped area, clay loam 31 percent and silty clay loam 25 percent. Average clay content at that depth is 30 percent. These are mapped patterns, not test borings, so the actual route still needs field checks.
| USDA soil survey, inside the Carlsbad mapped community boundary | What is mapped |
|---|---|
| Soil series mapped | Cho 43 percent, Angelo 21 percent, Tulia 20 percent and Mereta 14 percent |
| Texture at the surface | gravelly loam 43 percent, clay loam 36 percent and loam 20 percent |
| Texture about 40 inches down | gravelly loam 43 percent, clay loam 31 percent and silty clay loam 25 percent |
| Engineering class about 40 inches down | lean clay (CL) 99 percent |
| Average clay content about 40 inches down | 30 percent |
| Bedrock mapped within 60 inches | None mapped |
| Seasonal water table within 60 inches | 0 percent of the area |
| Flood prone soils | 0 percent of the area |
| High corrosion risk for uncoated steel | 21 percent of the area |
The USDA survey places bedrock below the top five feet in mapped Carlsbad soils, without ruling out deeper rock. Seasonal water table and flood prone soils are not mapped in the community, which informs pit planning but does not replace a site check. High steel corrosion risk is mapped across 21 percent of Carlsbad, so the line owner should consider casing and tracer wire materials; HDPE is not affected by soil corrosion. The mapped Cemented colluvium and sheetwash alluvium is Pleistocene age and includes cemented clay, gravel, sand and silt. Guadalupian sedimentary rock is also mapped and is Permian age.
How do we drill Carlsbad gravelly loam?
Carlsbad’s gravelly loam can cut readily, while loose gravel may shift the drill head. We match fluid and reaming to the ground, then track the bore near streets such as 8th Street.
- Cho gravelly loam makes gravel possible along a Carlsbad route, so we check depth and pitch at each drill rod to catch head movement early.
- Where gravelly ground caves behind the bit, we build the hole in stages and have the pipe ready before the final ream near 8th Street.
- Carlsbad’s mapped clay loam and silty clay loam can hold an open hole, so we adjust drilling fluid and avoid leaving the opened bore waiting.
- Before a bore approaches marked lines on Main Street, hydrovac potholing exposes each one; surface marks show location, not burial depth.

Which roads, tracks or creeks might a Carlsbad bore cross near 8th Street?
US 87 runs through Carlsbad, with 1.9 mapped roadway miles inside the community boundary. A bore under its pavement is planned to avoid open cutting the highway. The longest named streets include 8th Street at 0.8 miles, Main Street at 0.78 miles and Dallas Street at 0.73 miles. Fort Worth Street adds another possible local route at 0.69 miles. The mapped street network totals 18.87 public road centerline miles, so the exact address and route matter when choosing entry and exit pits.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| US 87 | US highway | 1.9 roadway miles inside | State highway office |
| North Concho River | Stream nearby | 0.5 miles outside | Checked for Corps of Engineers jurisdiction |
| Mule Creek | Stream nearby | 0.6 miles outside | Checked for Corps of Engineers jurisdiction |
No railroad is mapped inside Carlsbad or within one mile outside its boundary, so there is no mapped track to route around. The mapped street and rail crossing inventory shows no crossings inside the community. No stream channel is mapped inside Carlsbad, either. The North Concho River is 0.5 miles from the mapped boundary and Mule Creek is 0.6 miles away. Neither is a mapped street crossing inside the community, but a proposed water crossing still needs review during planning. We account for Cho soil when planning Carlsbad boring, with no lakes or ponds mapped within one mile.
Whose permission does a Carlsbad bore need in Tom Green County?
Carlsbad has no city government, so street authority depends on whether a route is on county or state property. Work in the US 87 right of way needs a TxDOT utility permit reviewed by the TxDOT San Angelo District. The utility owner, not the drilling contractor, applies through TxDOT’s online RULIS system; we prepare the plan and profile for the owner’s application. TxDOT requires boring or tunneling under existing highway pavement, and highway crossings are encased. A proposed crossing near the North Concho River is checked for U.S. Army Corps of Engineers jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
What is already in the ground in Carlsbad, Tom Green County?
EPA drinking water records do not identify which provider serves a specific Carlsbad address, so confirm the water provider with the county or local water district before planning a bore. For electric service in Tom Green County, utilities reporting to the EIA include AEP Texas North, Oncor Electric Delivery Company, Concho Valley Electric Cooperative and Southwest Texas Electric Cooperative. Those reports do not establish which company serves each address. We confirm the line owner before planning an electric conduit bore along a Carlsbad street.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| AEP Texas North, Oncor Electric Delivery Company, Concho Valley Electric Cooperative and Southwest Texas Electric Cooperative | Electric utilities reporting service in Tom Green County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put Carlsbad’s median housing year at 1977; 33 percent of homes were built before 1960, while 67 percent date from 1960 to 1999. No homes are reported from 2000 or later. That age mix makes replacement lines a likely part of work along Main Street, alongside new services. Before drilling near a marked utility, we hydrovac pothole to expose it because paint shows position, not depth.

How far is Carlsbad from San Angelo and our Yukon office?
Carlsbad is in Tom Green County at an elevation of 2,075 feet, with 1.55 square miles of mapped land and ZIP code 76934. Grape Creek is 5.9 miles east; San Angelo is 16.2 miles southeast, and Robert Lee is 21.7 miles northeast. San Angelo is both the county seat and the nearest larger city. From our Yukon, Oklahoma main office, Carlsbad is 391 road miles away and a 7.7 hour drive. That distance is part of planning equipment and crew mobilization for a US 87 or 8th Street job.
Places near Carlsbad
- Directional boring in Grape Creek: 5.9 miles east
- Directional boring in San Angelo: 16.2 miles southeast
- Directional boring in Robert Lee: 21.7 miles northeast
- Directional boring in Sterling City: 25.7 miles northwest
- Directional boring in Mertzon: 26.4 miles southwest
Which jobs call for a bore near Carlsbad and the North Concho River?
- US 87 crossing: A highway bore can carry water, sewer or conduit beneath pavement without cutting across the Carlsbad roadway.
- Street service: A water or sewer line can be routed toward a Main Street property with entry and exit pits placed off the paved route.
- Fiber route: Electric conduit or fiber along 8th Street needs a path checked against marked buried lines before drilling.
- Creek crossing: A proposed line near the North Concho River needs a planned route and a check for federal waterway jurisdiction.
- Replacement line: Older housing around Dallas Street can call for a new water or sewer service routed beneath the street surface.
- Utility conduit: Before setting a conduit bore near Fort Worth Street, confirm the electric line owner for the specific address.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What should I send for a Carlsbad bore near Fort Worth Street?
A map pin matters on Fort Worth Street because the exact route determines which buried lines and road surfaces a Carlsbad bore could encounter. For work near Main Street in Carlsbad, send us the address or pin, what goes underground, pipe or conduit size, and footage. A sketch or plans help us assess the route, including any approach toward the North Concho River.
The price reflects the job, not one measure alone. Cho gravelly loam and the actual ground affect drilling; the number of utilities to cross and expose also matters. A route under US 87 brings pavement and permit planning into the scope, while pits, excavator time and sand backfill affect the setup. Pipe size, bore length and any creek crossing add detail. Carlsbad’s 391 road miles from Yukon also make mobilization part of planning, as can high profile or emergency work.
Questions people ask about boring in Carlsbad
Does Trinity take directional boring jobs in Tom Green County near Carlsbad, and who staffs them?
Yes, Trinity takes directional boring work in Carlsbad, Tom Green County. We use our own crews and partner contractor crews from vetted satellite yards, while our Yukon, Oklahoma office remains the main office. You work with Trinity from the first call through the bore log, including for a route near US 87.
Who approves a bore under US 87 in Carlsbad, and which state office reviews it?
TxDOT reviews a utility permit for work in the US 87 right of way through its San Angelo District. The utility owner submits the application in RULIS, while we provide the bore plan and profile for that filing. TxDOT requires boring or tunneling beneath existing highway pavement in Carlsbad.
Can a line be bored beneath the North Concho River near Carlsbad?
A crossing beneath the North Concho River can be evaluated for a bore, but the route and ground need review first. The river is 0.5 miles from Carlsbad’s mapped boundary. During planning, the crossing is checked for U.S. Army Corps of Engineers jurisdiction, and the bore plan is set to the site.
Which company owns the electric lines for my Carlsbad address in Tom Green County, and who confirms conduit specs?
The specific electric line owner must be confirmed for your Carlsbad address before conduit is planned. AEP Texas North, Oncor Electric Delivery Company, Concho Valley Electric Cooperative and Southwest Texas Electric Cooperative report service in Tom Green County, but that does not identify the provider at every address. Confirm conduit specifications with the line owner.
Who controls Dallas Street in Carlsbad, and does a new line have to cut the road?
Carlsbad has no city government, so Dallas Street authority belongs to the county or state depending on the road property. A directional bore can install a line beneath the street without cutting its surface, with pits placed at the route ends. The mapped Dallas Street length is 0.73 miles.
How old are buried lines near Main Street in Carlsbad, and what does that mean for a replacement bore?
The age of a buried line needs to be checked at the Main Street address; housing age is only a clue, not a utility record. American Community Survey estimates put the median Carlsbad housing year at 1977, with 33 percent built before 1960. A replacement route needs marked utilities exposed before the drill approaches.
How far is Carlsbad from the Yukon office near San Angelo, and does that affect my job?
From our Yukon, Oklahoma main office, we cover Carlsbad, 391 road miles away, with a 7.7 hour drive for planning. San Angelo, the Tom Green County seat, is 16.2 miles southeast of Carlsbad. The Yukon distance affects mobilization planning, so the route, equipment and work scope near US 87 matter when arranging a job.
How much notice does Texas811 need for a Carlsbad bore near 8th Street, and what if marks move?
For a bore along 8th Street, request a Texas811 locate at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. For Carlsbad work in Tom Green County, we make a new request if the start slips more than 14 days past the original notice. Near Mule Creek, we have worn or moved marks refreshed through Texas811 before boring work continues.
What affects the cost of directional boring under US 87 in Carlsbad?
The scope sets the price for a US 87 bore, with no single factor deciding it. Length, pipe or conduit size, Cho gravelly loam, crossed utilities, pavement, pits and excavator time all affect the work. A creek crossing or mobilization from Yukon can also change the plan. A map pin helps identify the route details.
Where the Carlsbad facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Carlsbad
- U.S. Census Bureau, TIGER/Line 2024: Carlsbad boundary, roads, rail lines and streams
- U.S. Census Bureau, 2020 Census: Carlsbad population count
- U.S. Census Bureau, American Community Survey 2019 to 2023: Carlsbad housing units and year built
- Macrostrat geologic map compilation: map units under Carlsbad
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Tom Green County
- U.S. Geological Survey, Elevation Point Query Service: Carlsbad elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Carlsbad
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Carlsbad
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Carlsbad, Texas
Type the address of your job in Carlsbad. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Carlsbad
Same county: Christoval. All counties: Texas county list.
