Sterling City Texas Directional Boring: Angelo Silty Clay, Bodcaw Creek and US 87
Quick Answer: Trinity Boring Solutions takes directional boring, also called horizontal directional drilling (HDD), work in Sterling City, where a route may need to pass beneath Bodcaw Creek. The Yukon, Oklahoma main office is 394 road miles away, and US 87 is one of the local routes to plan around. Angelo soil covers much of the city, with silty clay below the surface. That sticky ground can grip a pipe, so staged reaming and a same day pullback matter.
Sterling City bores at a glance
- County seat of Sterling County, Texas. Population 1,127 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 394 miles, about 7.7 hours of driving.
- Ground: Angelo soil is mapped on 70 percent of the area, with silty clay about 40 inches down.
- Rock: no bedrock is mapped in the top 60 inches.
- Highways inside the boundary: US 87, Texas State Highway 158 and Texas State Highway 163. State permit office: TxDOT San Angelo District.
- Railroad track inside the boundary: none mapped.
- Named streams inside the boundary: Bodcaw Creek.
- Public water: City of Sterling City, groundwater wells.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Which contractor handles directional boring near Bodcaw Creek in Sterling City?
Sterling City is an incorporated city and the Sterling County seat, so its city streets belong to the city itself. Sterling City’s Census Bureau Vintage 2024 population estimate of 1,127 informs how we plan underground work in Sterling County. We install water, sewer, gas, electric conduit and fiber for routes along 4th Street or toward Bodcaw Creek, with the bore path planned around marked utilities.
Our main office is in Yukon, Oklahoma, and Sterling City work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore is roughly 4,100 feet of 48 inch pipe under the Arkansas River in Tulsa. Against that scale, work near 4th Street is more likely to involve a service line or utility conduit, sized to the route and ground.

How does the Angelo soil series affect boring in Sterling City?
The USDA soil survey maps Angelo soil across 70 percent of Sterling City and Broome soil across 23 percent. Angelo silty clay loam has gentle mapped slopes, while Broome is also silty clay loam. At about 40 inches below the surface, 71 percent of the mapped area is silty clay and 23 percent is silty clay loam; the average clay content there is 39 percent. The Angelo soil series and silty clay loam surface guide our boring plan; no sandy area is mapped at that depth. These are mapped soil patterns, not test borings, so the route still needs field checks.
| USDA soil survey, inside the Sterling City city limits | What is mapped |
|---|---|
| Soil series mapped | Angelo 70 percent, Broome 23 percent and Mereta 5 percent |
| Texture at the surface | silty clay loam 94 percent and clay loam 5 percent |
| Texture about 40 inches down | silty clay 71 percent, silty clay loam 23 percent and clay loam 5 percent |
| Engineering class about 40 inches down | lean clay (CL) 98 percent |
| Average clay content about 40 inches down | 39 percent |
| Bedrock mapped within 60 inches | None mapped |
| Seasonal water table within 60 inches | 0 percent of the area |
| Flood prone soils | 1 percent of the area |
| High corrosion risk for uncoated steel | 71 percent of the area |
Bedrock is not mapped in the top five feet of Sterling City, which does not rule out deeper rock. A seasonal water table is not mapped within 60 inches, while flood prone soils cover 1 percent of the mapped area; Bodcaw Creek still calls for channel specific planning. High steel corrosion risk is mapped across 71 percent, so the line owner should consider materials for steel casing and tracer wire. The Ogallala Formation, mapped as Neogene, includes sand, silt, clay, gravel and caliche, which can change along a bore.
How do we drill Sterling City’s silty clay?
Sterling City’s silty clay can stay open but may stick to the reamer and grip the pipe. We adjust the fluid and reaming sequence to the Angelo and Broome soil patterns along the route.
- In Angelo silty clay, we use a thinner drilling fluid and polymer, then enlarge the hole in stages to limit sticky buildup on the reamer.
- Because clay can swell around pipe, we plan to pull the line the same day the hole is opened along a Sterling City route.
- Near pavement on US 87, we watch fluid returns and pressure so the clay does not lift the road surface.
- At Bodcaw Creek, we plan the bore beneath the channel, expose marked utilities first, and track depth and pitch as the drill advances.

What does a bore have to cross in Sterling City near US 87?
US 87, Texas State Highway 158 and Texas State Highway 163 run inside Sterling City’s limits, so a crossing plan must identify the road owner and right of way. The mapped public streets total 26.32 miles. 4th Street is the longest named street at 1.51 miles, followed by 7th Street at 1.43 miles and 5th Street at 1.34 miles. A bore beneath one of these streets can keep its pavement intact, subject to locating and exposing utilities along the planned path.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| US 87 | US highway | 1.5 roadway miles inside | State highway office |
| Texas State Highway 158 | State highway | 2.3 roadway miles inside | State highway office |
| Texas State Highway 163 | State highway | 0.9 roadway miles inside | State highway office |
| Bodcaw Creek | Stream | 0.97 channel miles inside | Checked for Corps of Engineers jurisdiction |
| North Concho River | Stream nearby | Along the boundary | Checked for Corps of Engineers jurisdiction |
No railroad is mapped inside Sterling City or within one mile outside its limits, and none is mapped at a street crossing. Bodcaw Creek runs 0.97 channel miles through the city, with nine mapped street crossings of named streams. The North Concho River runs along or touches the city boundary. We account for Bodcaw Creek when planning crossings; no lakes or ponds are mapped within one mile in Sterling City. For a Bodcaw Creek route, the channel and bank affect bore depth and planning, and the crossing is checked for federal waterway jurisdiction.
Who has to sign off on a bore in Sterling County in Sterling City?
For work along US 87 or either state highway, TxDOT controls the highway right of way in Sterling City, and the TxDOT San Angelo District reviews the utility permit. The utility owner, not the drilling contractor, files through TxDOT’s online RULIS system; we prepare the bore plan and profile for that application and work under the owner’s permit. TxDOT requires a bored or tunneled installation under existing highway pavement, with casing and the required cover. City streets such as 4th Street belong to the city. Bodcaw Creek crossings are checked for U.S. Army Corps of Engineers jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
What is already in the ground near the City of Sterling City system?
The City of Sterling City public water system uses groundwater wells and reports 501 service connections serving 888 people. That makes water lines a likely consideration for a route near 4th Street, but each marked line still needs to be identified before drilling. AEP Texas North, Oncor Electric Delivery Company and Concho Valley Electric Cooperative report electric service in Sterling County. We confirm the electric line owner for the specific route before planning a conduit bore.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of Sterling City | Public water system | Groundwater wells | 501 connections, 888 people served |
| AEP Texas North, Oncor Electric Delivery Company and Concho Valley Electric Cooperative | Electric utilities reporting service in Sterling County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put Sterling City’s median housing year at 1983; 17 percent of homes were built before 1960, 63 percent from 1960 to 1999 and 20 percent in 2000 or later. A replacement bore along 7th Street may have older buried lines to work around, while a new service still needs a clear route. Before drilling near a marked utility, we hydrovac pothole to check its depth; paint alone shows position, not depth.

Where is Sterling City in relation to Carlsbad?
Sterling City is in Sterling County, covers 0.98 square miles and sits at an elevation of 2,286 feet. ZIP code 76951 serves the city, which is also the county seat. Carlsbad is 25.7 miles southeast; Forsan is 29.1 miles northwest; Garden City is 29.6 miles west; Robert Lee is 29.6 miles east; and Grape Creek is 31.3 miles southeast. Big Spring, the nearest larger city listed, is 40.2 miles northwest. From the Yukon, Oklahoma yard, the road distance is 394 miles and the drive is 7.7 hours, relevant to mobilization for a Sterling City job.
Places near Sterling City
- Directional boring in Carlsbad: 25.7 miles southeast
- Directional boring in Forsan: 29.1 miles northwest
- Directional boring in Garden City: 29.6 miles west
- Directional boring in Robert Lee: 29.6 miles east
- Directional boring in Grape Creek: 31.3 miles southeast
- Directional boring in Big Spring: 40.2 miles northwest
What would we bore along 4th Street in Sterling City?
- Water service: A new line near the City of Sterling City system can be routed beneath 4th Street pavement instead of cutting across it.
- Highway crossing: A route beneath US 87 needs a bore plan that accounts for the TxDOT right of way and the travel lanes.
- Fiber conduit: A conduit route along 7th Street needs marked utilities exposed before drilling through the mapped silty clay.
- Creek crossing: A Bodcaw Creek bore needs channel depth planning and a check for U.S. Army Corps of Engineers jurisdiction.
- Electric conduit: Along Texas State Highway 158, the line owner must be identified before the conduit route and permit are set.
- Sewer line: A route near 5th Street can use entry and exit pits in dirt to avoid cutting the street surface.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What drives the price of a Sterling City bore near 6th Street?
For a route near 6th Street, send the address or map pin, what will go underground, the pipe or conduit size and the footage. A sketch or plans help show how the route meets the street, marked utilities or a connection point. Those details let us scope the bore before choosing equipment and a path through Sterling City’s mapped silty clay.
Length and pipe or conduit size set the basic scope, while Sterling City’s silty clay can require a different reaming plan than easier ground. The number of utilities to expose, pavement or concrete, and a Bodcaw Creek crossing also affect the work. Pit setup, excavator time and sand backfill count too. The 394 road miles from Yukon affect mobilization, and a high profile or emergency job can add planning demands.
Questions people ask about boring in Sterling City
Does Trinity Boring Solutions take jobs in Sterling City and Sterling County?
Yes, we take directional boring work in Sterling City and across Texas. Our main office is in Yukon, and Sterling City work uses our own crews or satellite yards operated by drilling partners we have vetted. We stay involved from the first call through the bore log, including work near Bodcaw Creek.
Who owns electric lines in Sterling City and Sterling County, and who confirms conduit specs?
Electric service reporting in Sterling County includes AEP Texas North, Oncor Electric Delivery Company and Concho Valley Electric Cooperative. That list does not identify the provider at every Sterling City address. The line owner confirms the conduit specifications for the actual route, including a proposed crossing near US 87.
Who controls 5th Street in Sterling City, and does a bore require cutting it?
Sterling City is incorporated, so 5th Street is a city street. A directional bore can pass under its pavement without an open cut, with entry and exit pits placed in dirt where the site allows. Marked utilities on the planned route still need to be exposed before drilling.
What does the age of homes and buried lines near 7th Street in Sterling City mean for a replacement bore?
The American Community Survey 2019 to 2023 estimates put the median housing year at 1983, with 17 percent of homes built before 1960. A replacement route near 7th Street may encounter older buried utilities, so we locate and pothole marked lines before drilling close to them.
Does Angelo soil in Sterling City corrode steel, and what pipe should we use?
The USDA soil survey maps high steel corrosion risk across 71 percent of Sterling City. The line owner should consider the material and any coating for steel casing or tracer wire. HDPE avoids this particular soil corrosion concern, but the owner chooses the appropriate pipe for the line.
What ground does a bore pass through in Sterling City, including Angelo soil?
The USDA soil survey maps Angelo silty clay loam across 70 percent of the city. At about 40 inches down, silty clay covers 71 percent of the mapped area, with an average clay content of 39 percent. That sticky ground can build on a reamer, so staged enlargement and timely pipe pullback matter.
Does Trinity cover Carlsbad and rural sites outside Sterling City?
Yes, we take work beyond Sterling City’s limits, including routes toward Carlsbad, 25.7 miles southeast, and other Texas locations. A rural job still needs its address or map pin, proposed line, size and footage. A Bodcaw Creek crossing or a route along US 87 can change the plan.
How much notice does Texas811 need for a bore along 4th Street in Sterling City, and what if marks move?
For a 4th Street bore, the Texas811 request must be made at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before. On US 87 crossings, we make a new request if the start slips more than 14 days past the original notice. Worn or moved marks must be refreshed through Texas811 before work resumes.
What affects the cost of a directional bore near US 87 in Sterling City?
The route length and pipe or conduit size matter, as do Sterling City’s silty clay, the utilities that need exposure, and pavement or concrete along US 87. A Bodcaw Creek crossing can add planning, pits or equipment time. Mobilization from the Yukon yard is another job factor; the scope determines which items apply.
Where the Sterling City facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Sterling City
- U.S. Census Bureau, TIGER/Line 2024: Sterling City boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Sterling City
- U.S. Census Bureau, American Community Survey 2019 to 2023: Sterling City housing units and year built
- Macrostrat geologic map compilation: map units under Sterling City
- U.S. EPA Safe Drinking Water Information System: public water systems serving Sterling City
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Sterling County
- U.S. Geological Survey, Elevation Point Query Service: Sterling City elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Sterling City
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Sterling City
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Sterling City, Texas
Type the address of your job in Sterling City. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Sterling City
All counties: Texas county list.
