Grape Creek Texas Directional Boring: Angelo Clay Loam, US 87, Grape Creek
Quick Answer: Need a line beneath US 87 or Grape Creek without cutting pavement or a bank? We use directional boring, also called horizontal directional drilling (HDD), for those Grape Creek routes. Grape Creek is 386 road miles from our Yukon, Oklahoma main office, and a job along Grape Creek Road affects the route and mobilization. Angelo clay loam covers 62 percent of the mapped area, and silty clay loam is common at 40 inches. That sticky ground calls for controlled fluid and staged reaming.
Grape Creek bores at a glance
- Unincorporated community in Tom Green County, Texas. Population 3,594 (2020 Census count).
- Road distance from our Yukon, Oklahoma main office: 386 miles, about 7.7 hours of driving.
- Ground: Angelo soil is mapped on 66 percent of the area, with silty clay loam about 40 inches down.
- Rock: no bedrock is mapped in the top 60 inches.
- Highways inside the boundary: US 87 and FM 2288. State permit office: TxDOT San Angelo District.
- Railroad track inside the boundary: none mapped.
- Named streams inside the boundary: Grape Creek, Bald Eagle Creek and North Concho River.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who does directional boring near US 87 in Grape Creek?
Trinity Boring Solutions takes directional boring work in Grape Creek, an unincorporated Tom Green County community with 3,594 people in the 2020 Census count. Need water, sewer, gas, electric conduit or fiber beneath US 87, FM 2288 or Grape Creek Road without an open cut? Our crews install those lines along those routes.
Our main office is in Yukon, Oklahoma, and Grape Creek work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We started as a family business in 1965 and have bored since 1982. Four decades of directional boring matter around Grape Creek’s clay loam, where sticky cuttings call for careful fluid control and reaming.

What does the soil survey show for Grape Creek and Angelo soil?
The USDA soil survey maps Angelo soil across 66 percent of Grape Creek, mostly as Angelo clay loam on nearly level ground. At about 40 inches below the surface, 69 percent of the mapped area has silty clay loam and 25 percent has clay loam. Average clay content at that depth is 35 percent, and 71 percent is mapped as heavy clay. Along Ballard Road, our bore planning does not assume mapped sand at that depth. These are mapped patterns, not test borings; sticky clay can ball on a reamer and grip pipe, so the bore plan needs controlled fluid and staged reaming.
| USDA soil survey, inside the Grape Creek mapped community boundary | What is mapped |
|---|---|
| Soil series mapped | Angelo 66 percent, Mereta 13 percent, Tulia 10 percent, Cho 6 percent and Rioconcho 5 percent |
| Texture at the surface | clay loam 84 percent, loam 10 percent and gravelly loam 6 percent |
| Texture about 40 inches down | silty clay loam 69 percent, clay loam 25 percent and gravelly loam 6 percent |
| Engineering class about 40 inches down | lean clay (CL) 94 percent and fat clay (CH) 5 percent |
| Average clay content about 40 inches down | 35 percent |
| Bedrock mapped within 60 inches | None mapped |
| Seasonal water table within 60 inches | 0 percent of the area |
| Flood prone soils | 5 percent of the area |
| High corrosion risk for uncoated steel | 71 percent of the area |
Bedrock is not mapped in the top five feet of Grape Creek, though deeper rock is not ruled out. Seasonal water table is not mapped within 60 inches, while flood prone soils cover 5 percent of the mapped area, so Grape Creek channel crossings need depth planning and a jurisdiction check. High steel corrosion risk is mapped across 71 percent, a concern for steel casing and tracer wire that the line owner should address. The geologic map also shows Quaternary deposit, undivided, with sand, silt, clay and gravel, and Permian sedimentary rock; those units are not a substitute for route specific ground investigation.
How do we bore Grape Creek’s silty clay loam along Dilly Road?
We plan a Grape Creek bore around the mapped silty clay loam, which can stay open but also become sticky and grip the pipe. Controlled fluid and a staged pull help manage that ground.
- We expect sticky cuttings in Grape Creek’s silty clay loam, so we use thinner drilling fluid with polymer and ream in stages to keep the hole manageable.
- Where Grape Creek’s heavy clay is encountered, we watch fluid returns closely; pressure must be controlled so it does not lift pavement along US 87.
- Before the final ream along Grape Creek Road, we have the pipe ready and pull it the same day the hole is opened to limit the time clay can grip it.
- At a Grape Creek or Bald Eagle Creek crossing, we plan depth beneath the channel and check the route for possible U.S. Army Corps of Engineers jurisdiction.

What is in the way of a new line near Grape Creek Road?
Grape Creek has 9.6 mapped roadway miles of US 87 and 1.4 miles of FM 2288 inside the community, so a crossing route may involve state highway right of way. Among named streets, Grape Creek Road runs 6.55 miles, March Road 4.98 miles and Wren Road 3.34 miles inside the mapped boundary. Ballard Road adds another 3.13 miles. A bore can leave pavement and driveways uncut, but the entry and exit pits, marked lines and the exact crossing route still shape the plan.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| US 87 | US highway | 9.6 roadway miles inside | State highway office |
| FM 2288 | State highway | 1.4 roadway miles inside | State highway office |
| Grape Creek | Stream | 5.22 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Bald Eagle Creek | Stream | 2.16 channel miles inside | Checked for Corps of Engineers jurisdiction |
| North Concho River | Stream | 0.14 channel miles inside | Checked for Corps of Engineers jurisdiction |
| O C Fisher Lake | Lake or pond | 4,208 acres, nearby | Checked for Corps of Engineers jurisdiction |
No railroad is mapped inside Grape Creek or within one mile outside the community, so a mapped street and rail crossing is not identified here. Named streams include Grape Creek, with 5.22 channel miles inside the community, and Bald Eagle Creek, with 2.16 miles; the North Concho River has 0.14 mile. Five mapped street crossings of named streams make channel depth and a jurisdiction review relevant. O C Fisher Lake, a 4,208 acre lake, is within one mile but outside the mapped boundary.
Do I need a permit to bore in Tom Green County in Grape Creek?
Grape Creek is unincorporated, so its streets are not under a city government; county or state authority depends on the route. For work in US 87, FM 2288 or other state highway right of way, the line owner files the TxDOT utility permit through RULIS, and TxDOT’s San Angelo District reviews it. We prepare the bore plan and profile for the owner’s application. TxDOT cover rules set 60 inches for electric and communication lines at highway crossings, 48 inches alongside right of way, and 60 inches for water crossings. Existing highway pavement is bored or tunneled, with encased crossings. A Grape Creek or Bald Eagle Creek route is checked for U.S. Army Corps of Engineers jurisdiction; any railroad route would require an agreement from its track owner.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Which utilities serve Grape Creek in Tom Green County?
The water provider for a specific Grape Creek address has to be confirmed with Tom Green County or the local water district before a bore is planned. County electric service is reported by AEP Texas North, Oncor Electric Delivery Company, Concho Valley Electric Cooperative and Southwest Texas Electric Cooperative; that list does not identify the line owner at every address. Before planning an electric conduit bore near US 87 or March Road, confirm which owner controls the line.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| AEP Texas North, Oncor Electric Delivery Company, Concho Valley Electric Cooperative and Southwest Texas Electric Cooperative | Electric utilities reporting service in Tom Green County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put Grape Creek’s median housing year at 1985: 1 percent of homes were built before 1960, 79 percent from 1960 to 1999, and 20 percent in 2000 or later. Work along Grape Creek Road may mean replacing older service or adding a newer connection. We hydrovac pothole each marked utility on the bore path before drilling near it, since marks show position, not depth, and a buried line along March Road needs to be exposed before the drill approaches.

Where is Grape Creek in relation to Carlsbad?
Grape Creek is an unincorporated community in Tom Green County, 5.9 miles east of Carlsbad and 11.3 miles northwest of San Angelo. The county seat and nearest larger city is San Angelo, southeast of the community. Grape Creek covers 15.66 square miles at an elevation of 1,990 feet, and its ZIP code is 76901. Miles is 21.3 miles east, while Robert Lee is 22.0 miles north. From our Yukon yard, the drive is 386 road miles and 7.7 hours, which matters when setting mobilization for a bore on US 87 or Grape Creek Road.
Places near Grape Creek
- Directional boring in Carlsbad: 5.9 miles west
- Directional boring in San Angelo: 11.3 miles southeast
- Directional boring in Miles: 21.3 miles east
- Directional boring in Robert Lee: 22 miles north
- Directional boring in Bronte: 25.7 miles northeast
What would we bore near March Road in Grape Creek?
- Highway crossing: A US 87 bore needs a route beneath the travel lanes, with the TxDOT permit and cover plan handled for the line owner.
- Water service: A connection near Grape Creek Road needs the address specific water provider confirmed before its route and bore size are planned.
- Fiber conduit: A run along March Road can use a bore to pass beneath pavement while avoiding marked utilities exposed along the planned path.
- Creek crossing: A route beneath Grape Creek needs channel depth planning and a check for U.S. Army Corps of Engineers jurisdiction.
- Street crossing: A bore beneath Ballard Road can keep the road surface intact, with entry pits placed clear of marked utilities.
- Electric conduit: A route near FM 2288 needs the electric line owner confirmed before conduit planning and any TxDOT right of way filing.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What do you need to quote a bore near Ballard Road in Grape Creek?
For a Grape Creek quote, start with where the route is, such as an address or map pin near Ballard Road. Tell us what goes underground, whether it is a water line or fiber conduit, then give the pipe or conduit size and footage. A sketch or plans for a US 87 crossing help us see the route, access and nearby utilities.
The price for a Grape Creek bore follows the job details. Soil comes first here: Angelo clay loam and silty clay loam can add reaming and fluid control work. Next, the number of marked utilities to expose and the pavement on US 87 or Grape Creek Road affect the setup. Creek crossings, pits, excavator time and sand backfill also matter. The 386 road miles from Yukon affect mobilization, while high profile or emergency timing can change the work plan.
Questions people ask about boring in Grape Creek
Does Trinity Boring Solutions take jobs in Grape Creek, Tom Green County, and who staffs them?
Yes, we take directional boring work in Grape Creek, Tom Green County. Our own crews handle projects, and work may also be done from satellite yards run by partner drilling contractors we have vetted. You deal with Trinity through the bore log, whether the work is near US 87 or Grape Creek Road.
Does Angelo soil in Grape Creek corrode steel, and what pipe should I use?
The USDA soil survey maps high steel corrosion risk across 71 percent of Grape Creek, so the line owner should consider casing and tracer wire materials. Angelo clay loam is widely mapped here. HDPE is not affected by soil corrosion, while the line owner selects any coating for steel components.
What ground does a bore pass through in Grape Creek’s Angelo soil?
The USDA soil survey maps Angelo soil across 66 percent of Grape Creek, with silty clay loam at about 40 inches across 69 percent of the mapped area. Average clay content at that depth is 35 percent. That sticky ground can ball on the reamer, so staged reaming and controlled fluid help manage the bore.
Will a directional bore in Grape Creek hit rock near Bald Eagle Creek?
Bedrock is not mapped in Grape Creek’s top five feet, but that does not rule out deeper rock. The geologic map shows Quaternary deposits of sand, silt, clay and gravel, as well as Permian sedimentary rock. A specific route still needs planning around its conditions, including near Grape Creek channel deposits.
Who approves a bore under US 87 in Grape Creek, and which office reviews it?
The line owner applies for the US 87 right of way utility permit through TxDOT’s RULIS system. TxDOT’s San Angelo District reviews the application, using a bore plan and profile we prepare for the owner. The permit sets the project requirements, including the cover depth for the proposed line.
Can you bore beneath Grape Creek in Grape Creek?
A bore beneath Grape Creek can be planned to pass under the channel without cutting its banks. The route needs depth planning, and during planning the crossing is checked for U.S. Army Corps of Engineers jurisdiction. The USDA soil survey also maps flood prone soils across 5 percent of the community.
How much notice does Texas811 need for a bore near Grape Creek Road?
For work near Grape Creek Road, make the Texas811 locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. For work in Tom Green County, we submit a new request if the start slips more than 14 days past the original notice. Before continuing boring on March Road, we have worn or moved marks refreshed through Texas811.
How far is Grape Creek from San Angelo and the Yukon office, and does distance affect a job?
Grape Creek is 11.3 miles northwest of San Angelo and 386 road miles from our Yukon, Oklahoma main office. That distance can affect mobilization for a bore near FM 2288 or another local route. The job’s length, ground and access still shape the work plan.
What affects directional bore costs under US 87 in Grape Creek?
The US 87 bore route and Grape Creek’s clay loam matter, along with pipe or conduit size and length. Price also reflects how many utilities must be exposed, pavement, creek or drainage crossings, pits and excavator time. Mobilization from Yukon, high profile work or emergency timing can also change the job scope.
Where the Grape Creek facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Grape Creek
- U.S. Census Bureau, TIGER/Line 2024: Grape Creek boundary, roads, rail lines and streams
- U.S. Census Bureau, 2020 Census: Grape Creek population count
- U.S. Census Bureau, American Community Survey 2019 to 2023: Grape Creek housing units and year built
- Macrostrat geologic map compilation: map units under Grape Creek
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Tom Green County
- U.S. Geological Survey, Elevation Point Query Service: Grape Creek elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Grape Creek
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Grape Creek
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Grape Creek, Texas
Type the address of your job in Grape Creek. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Grape Creek
Same county: Christoval. All counties: Texas county list.
