trinityboringsolutions.com

Bronte Texas Directional Boring: Clay, US 277 and West Kickapoo Creek

Quick Answer: US 277 and West Kickapoo Creek are the main obstacles; Trinity Boring Solutions takes directional boring, also called horizontal directional drilling (HDD), work in Bronte, Texas. Bronte is 347 road miles from our Yukon, Oklahoma main office, so access along Railroad Street matters to mobilization. USDA soil maps show clay at about 40 inches, where sticky cuttings can grip the pipe. We plan the reaming and pull around that soil.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Bronte bores at a glance

  • Incorporated city in Coke County, Texas. Population 968 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 347 miles, about 6.8 hours of driving.
  • Ground: Bronte soil is mapped on 43 percent of the area, with clay about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: US 277 and Texas State Highway 158. State permit office: TxDOT San Angelo District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: West Kickapoo Creek, Middle Kickapoo Creek and Kickapoo Creek.
  • Public water: City of Bronte, surface water.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who handles directional boring on Railroad Street in Bronte?

We take directional boring work in Bronte, in Coke County, where the Census Bureau Vintage 2024 estimate puts the population at 968. Water and sewer lines can run along State Street, while electric conduit, gas lines and fiber can follow routes near US 277 or Railroad Street. The route and existing utilities determine the bore plan.

Our main office is in Yukon, Oklahoma, and Bronte work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. For a Railroad Street service, our work ranges from 3/4 inch service lines to 48 inch casing. Our family business began in 1965, and we have done directional boring since 1982, with Bronte’s fine sandy loam informing underground planning.

Horizontal directional drill rig set up on an open grass field with support trucks and a vacuum excavation truck
Our horizontal directional drill set up in an open field with the support trucks and the vacuum excavation truck. Photos on this page are from our jobs in Oklahoma and Texas.

What is Bronte soil like to bore through?

The USDA soil survey maps Bronte soil across 43% of the town, with fine sandy loam mapped at the surface across 53%. At about 40 inches down, clay accounts for 43% of mapped area, and clay loam for 28%. Those mapped shares describe the ground around places such as Railroad Street, not test borings at a proposed route. Clay can hold an open hole, then stick to the reamer or swell against the pipe. We plan the fluid and reaming to suit the conditions found along the bore.

USDA soil survey, inside the Bronte city limitsWhat is mapped
Soil series mappedBronte 43 percent, Sagerton 27 percent, Miles 10 percent, Colorado 9 percent and Westola 6 percent
Texture at the surfacefine sandy loam 53 percent, clay loam 27 percent and loam 10 percent
Texture about 40 inches downclay 43 percent, clay loam 28 percent and sandy clay loam 10 percent
Engineering class about 40 inches downlean clay (CL) 84 percent, clayey sand (SC) 10 percent and silty sand (SM) 6 percent
Average clay content about 40 inches down33 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches0 percent of the area
Flood prone soils20 percent of the area
High corrosion risk for uncoated steel43 percent of the area

Bedrock is not mapped in the top five feet in Bronte, but that does not rule out deeper rock. No seasonal water table is mapped within 60 inches. Flood prone soils cover 20% of mapped area, so a route near West Kickapoo Creek needs depth planning beneath the channel. High steel corrosion risk is mapped across 43% of area; the line owner chooses any coating for steel casing or tracer wire, while HDPE avoids that soil corrosion concern. Terrace deposits of sand, silt, clay and gravel are Cenozoic, alongside Early Permian sedimentary rock.

What does it take to bore Bronte clay?

Bronte soil can shift from fine sandy loam near the surface to clay below. At a route near State Street, we match fluid, reaming and pull timing to what the bore encounters.

  1. At a Bronte soil route near State Street, we use a fluid plan that limits sticky clay from balling on the reamer or gripping the pipe.
  2. Where clay is mapped beneath Railroad Street, staged reaming and a same day pipe pull help reduce the time an open hole sits.
  3. At West Kickapoo Creek, we plan the bore depth under the channel and check during planning whether the crossing falls under U.S. Army Corps of Engineers jurisdiction.
  4. Before a bore near the City of Bronte water system or county electric lines, we hydrovac marked utilities; paint shows position, not depth.
Walkover locator held over a flowing creek while tracking the drill head on a 385 foot rock bore in Guthrie, Oklahoma
Tracking the drill head with a walkover locator over a flowing creek on a 385 foot bore in Guthrie, Oklahoma.

Where does a line have to go under US 277 in Bronte?

US 277 and Texas State Highway 158 run through Bronte, so a crossing may need a bore beneath the highway pavement and travel lanes. Railroad Street is the longest named street at 1.81 miles in town, followed by Jefferson Street at 1.15 miles and State Street at 1.08 miles. Those road lengths make route access and the location of entry and exit pits part of the plan. We also account for pavement and driveways so the bore can pass below rather than cut across them.

CrossingTypeMapped extentWho has a say
US 277US highway1 roadway miles insideState highway office
Texas State Highway 158State highway1.7 roadway miles insideState highway office
West Kickapoo CreekStream1.83 channel miles insideChecked for Corps of Engineers jurisdiction
Middle Kickapoo CreekStream0.73 channel miles insideChecked for Corps of Engineers jurisdiction
Kickapoo CreekStream0.55 channel miles insideChecked for Corps of Engineers jurisdiction
East Kickapoo CreekStream nearby0.1 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Bronte or within one mile outside town, and no street and rail crossing is mapped. If a proposed route is found to cross a track, the railroad that owns it sets the crossing terms. West Kickapoo Creek has 1.83 channel miles in town, and Middle Kickapoo Creek and Kickapoo Creek also cross the limits. Public mapping shows eight street crossings of named streams, so a creek route needs careful depth planning. No lakes or ponds are mapped within one mile of Bronte, so we plan water related boring around West Kickapoo Creek crossings instead.

Who approves a Bronte bore in Coke County?

Bronte is incorporated, so its city streets, including Railroad Street and State Street, belong to the city. For work on US 277 or Texas State Highway 158 right of way, the utility that owns the line files the TxDOT permit through RULIS, and the TxDOT San Angelo District reviews it. We provide the bore plan and profile for the utility owner’s application and work under its permit. TxDOT cover requirements depend on line type: electric and communication lines need 60 inches at a crossing, water needs 60 inches, and pressurized sewer needs 60 inches. A West Kickapoo Creek crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

What is already in the ground near the City of Bronte?

The City of Bronte public water system uses surface water and reports 556 service connections serving 999 people. Before a hydrovac pothole near Oliver Avenue, we check marked lines so a water connection is exposed before the drill approaches. AEP Texas North, Oncor Electric Delivery Company, Concho Valley Electric Cooperative and Taylor Electric Cooperative report electric service in Coke County. We confirm the line owner before planning a conduit bore because those providers do not necessarily serve every address.

Line ownerWhat it isSourceSize
City of BrontePublic water systemSurface water556 connections, 999 people served
AEP Texas North, Oncor Electric Delivery Company, Concho Valley Electric Cooperative and Taylor Electric CooperativeElectric utilities reporting service in Coke CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 estimates put Bronte’s median housing year at 1973; 30% of homes were built before 1960 and 7% in 2000 or later. Along Jefferson Street, an older service replacement may need a different route than a new connection. We pothole marked utilities before drilling near them, since locate paint shows position, not depth.

Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building
Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building.

What is near Bronte, including Blackwell?

Bronte is in Coke County, covers 1.44 square miles and sits at an elevation of 1,797 feet. The town’s ZIP code is 76933. Robert Lee, the county seat, is 11.2 miles west; Blackwell is 13.8 miles north, and Wingate is 15.7 miles northeast. Winters is 20.2 miles east, while San Angelo, the nearest larger city listed, is 32.1 miles south. From our Yukon, Oklahoma main office, Bronte is 347 road miles away, a drive of 6.8 hours, so mobilization is part of planning a job near US 277.

Places near Bronte

What would we bore near West Kickapoo Creek in Bronte?

  • Highway crossing: A bore beneath US 277 keeps the route below the pavement and all travel lanes, with the utility owner arranging the TxDOT permit.
  • Water service: A connection near the City of Bronte system needs a route that accounts for existing surface water lines and service connections.
  • Street replacement: A new line along Jefferson Street can use a bore to pass beneath pavement without opening a trench across the street.
  • Creek crossing: A route under West Kickapoo Creek needs depth planning beneath the channel and a check for federal jurisdiction during planning.
  • Fiber conduit: A fiber route along Railroad Street needs marked utilities exposed before the drill advances through the mapped clay ground.
  • State highway route: A bore along Texas State Highway 158 needs the line owner to submit the right of way permit to TxDOT.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What should I send for a Bronte quote near Railroad Street?

For a bore near Railroad Street, send the address or map pin, what is going in the ground, pipe or conduit size and footage; a sketch or plans help. Include whether the route reaches US 277 or a creek, since that changes what we need to review before setting the bore path.

The job sets the price. Bronte is 347 road miles from Yukon, so mobilization matters. Clay mapped below the surface can affect fluid use, reaming and pull timing. A crossing at US 277 adds permit planning, while West Kickapoo Creek can add depth and water crossing considerations. We also account for bore length, pipe size, marked utilities to expose, pavement, pits, excavator time and backfill. Along US 277, we account for added planning demands when high profile or emergency boring work affects crossing schedules.

Questions people ask about boring in Bronte

Does Trinity Boring Solutions take Bronte jobs in Coke County, and who staffs them?

Yes. We take directional boring work in Bronte, and the job may be handled by our own crews or from a satellite yard run by a drilling contractor we have vetted. You work with Trinity through the bore log, including for a route near Railroad Street. Our main office is in Yukon, Oklahoma, 347 road miles from Bronte, and we coordinate Bronte permits through the TxDOT San Angelo District.

Who owns electric lines in Bronte, Coke County, and who confirms conduit specs?

Electric providers reporting service in Coke County include AEP Texas North, Oncor Electric Delivery Company, Concho Valley Electric Cooperative and Taylor Electric Cooperative. The line owner is confirmed for the specific address before a conduit bore, such as one planned along Oliver Avenue. That owner can confirm conduit requirements for its line.

Who is in charge of Bronte streets such as State Street, and can a bore avoid cutting them?

Bronte is incorporated, so State Street and other city streets belong to the city. Directional boring can pass below street pavement rather than open cut across it, with pits placed off the pavement where the site allows. Existing marked utilities still need to be exposed along the planned route.

What do older homes near Jefferson Street mean for replacement bores in Bronte?

Bronte’s median housing year is 1973, and the American Community Survey estimates 30% of homes were built before 1960. A replacement service near Jefferson Street may need to work around older buried lines, while a new service may follow a different path. We pothole marked utilities before drilling near them.

Are bore pits near West Kickapoo Creek in Bronte affected by groundwater or flooding?

Flood prone soils cover 20% of mapped area in Bronte, including ground that can affect planning near West Kickapoo Creek. No seasonal water table is mapped within 60 inches, but local conditions still matter at the pit. We plan the bore depth beneath the channel and check for federal jurisdiction during planning.

Does Bronte soil corrode steel, and what pipe is used in Bronte?

The USDA soil survey maps high steel corrosion risk across 43% of Bronte, so the line owner chooses any coating for steel casing or tracer wire. HDPE avoids that soil corrosion concern. At a route near Railroad Street, the pipe material and size are part of the bore plan.

What bore sizes and lengths can Trinity handle near Oliver Avenue in Bronte?

We handle work from 3/4 inch service lines to 48 inch casing, with bore lengths from 10 feet to 5,000 feet. A job near Oliver Avenue is sized to the line, route and ground conditions. Send the footage and pipe or conduit size so we can review the scope.

How much 811 notice is needed for a Bronte bore near Railroad Street, and what if marks move?

Texas811 requires a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before it. For Railroad Street, if the start slips more than 14 days past the original notice, make a new request. On Railroad Street, we have worn or moved marks refreshed through Texas811 before boring work continues.

What affects the cost of directional boring in Bronte near US 277?

The scope drives the price, including length, pipe size, ground, utility crossings, pavement, pits and backfill. A US 277 route may require TxDOT permit planning, while clay can affect reaming and fluid needs. West Kickapoo Creek adds crossing considerations, and the 347 road miles from Yukon affect mobilization.

Where the Bronte facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Bronte

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Bronte, Texas

Type the address of your job in Bronte. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Bronte

All counties: Texas county list.