trinityboringsolutions.com

Talco Texas Directional Boring: Crockett Soil, US 271 And Sanders Slough

Quick Answer: For Talco streets such as US 271, Trinity Boring Solutions takes directional boring work, also called horizontal directional drilling (HDD), in Texas. Our Yukon, Oklahoma main office is 270 road miles away, and routes near Loop 96 help us scope access and mobilization. Crockett soil is common here, with clay below the surface that can grip a reamer and pipe. We plan the drilling fluid and reaming around that ground and the streets the route must pass.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Talco bores at a glance

  • Incorporated city in Titus County, Texas. Population 487 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 270 miles, about 5.2 hours of driving.
  • Ground: Crockett soil is mapped on 63 percent of the area, with clay about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 98 percent of the area.
  • Highways inside the boundary: US 271, Loop 96 and FM 71. State permit office: TxDOT Atlanta District.
  • Railroad track inside the boundary: none mapped.
  • Public water: City of Talco, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Does anyone handle directional boring in Talco along US 271?

We take directional boring work in Talco, Titus County, including water, sewer, gas, electric conduit and fiber routes along US 271 and Loop 96. Talco is 270 road miles from our Yukon, Oklahoma yard, and our own crews or crews at vetted partner contractor yards can staff the work. The Census Bureau Vintage 2024 estimate puts the population at 487, a useful scale for planning service routes along local streets.

Our main office is in Yukon, Oklahoma, and Talco work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our family business started in 1965, and we have done directional boring since 1982, planning Talco work from 270 road miles away. From a service line on Broad Street to a longer route following US 271, our equipment handles 3/4 inch service lines through 48 inch casing and bores from 10 feet to 5,000 feet.

Aerial view of a bore pit with drill rig and conduit alongside a directional drill rig and conduit on a concrete lot
Our crew at a bore pit beside the directional drill on a conduit job, seen from above. Photos on this page are from our jobs in Oklahoma and Texas.

What is Talco ground like around Crockett soil?

The USDA soil survey maps Talco mostly as Crockett silt loam, with Normangee gravelly clay loam also present, so a bore may start in finer surface soil and meet clay below. Crockett covers 63 percent of the mapped area and Normangee covers 35 percent. At about 40 inches, the survey maps clay across 98 percent of the area, with an average clay content of 42 percent and no sandy area mapped at that depth. These are mapped soil patterns, not test borings, so the route still needs a site specific plan.

USDA soil survey, inside the Talco city limitsWhat is mapped
Soil series mappedCrockett 63 percent and Normangee 35 percent
Texture at the surfacesilt loam 63 percent and gravelly clay loam 35 percent
Texture about 40 inches downclay 98 percent
Engineering class about 40 inches downlean clay (CL) 65 percent and fat clay (CH) 35 percent
Average clay content about 40 inches down42 percent
Bedrock mapped within 60 inches98 percent of the area (0 percent hard rock, 98 percent weathered rock)
Seasonal water table within 60 inches2 percent of the area
Flood prone soils2 percent of the area
High corrosion risk for uncoated steel100 percent of the area

The USDA soil survey maps weathered bedrock within 60 inches across 98 percent of Talco, with typical depth at 56 inches; that can slow drilling compared with soil, though hard bedrock is not mapped in that depth range. Seasonal water table and flood prone soils each cover 2 percent, so pits and drainage near Sanders Slough still need attention. High steel corrosion risk is mapped across 100 percent of the city. The geologic map names the Paleocene Midway Group, undivided, with clay, sand, silt and limestone; local changes can affect tooling and casing choices.

How do we bore Talco clay?

For Talco clay, we control fluid and reaming so sticky soil does not build up on the tool or grip the pipe. The Crockett and Normangee map units guide the plan, but the actual route matters.

  1. Crockett soil holds a bore open but can stick to the reamer, so we use suitable fluid and stage the reaming before pulling pipe.
  2. With clay mapped at about 40 inches across 98 percent of Talco, we watch fluid returns and keep pressure controlled near pavement on Broad Street.
  3. Before drilling near a marked line on McLean Street, we hydrovac pothole it to check depth because surface paint only shows its position.
  4. We track the drill head from the surface and record depth and pitch, including on routes near the unnamed drainage mapped in Talco.
Rock bit on the drill rod at the front of a Vermeer D24x40 S3 with broken sandstone at the entry of a rock bore in Guthrie, OK
Rock bit on the drill rod with broken sandstone at the entry of a rock bore in Guthrie, Oklahoma.

What does a Talco bore have to cross near Sanders Slough?

US 271, Loop 96 and FM 71 are mapped inside Talco, so a route may need to pass beneath a highway as well as local streets. US 271 has 0.8 mapped roadway miles within city limits, Loop 96 has 0.6, and FM 71 has 0.2. McLean Street is the longest named street at 1.34 miles, followed by Broad Street at 1.07 miles and 5th Street at 1.02 miles. A planned bore can keep pavement and driveways intact where an open cut would interrupt them.

CrossingTypeMapped extentWho has a say
US 271US highway0.8 roadway miles insideState highway office
Loop 96State highway0.6 roadway miles insideState highway office
FM 71State highway0.2 roadway miles insideState highway office
Sanders SloughStream nearby0.8 miles outsideChecked for Corps of Engineers jurisdiction
Prairie LakeLake or pond52 acres, nearbyChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Talco or within one mile, and public records show no mapped street and rail crossings. No named stream runs inside the limits either. Sanders Slough is 0.8 miles outside the city, and Prairie Lake is also outside the limits but within a mile. Talco has 0.28 miles of unnamed drainage mapped inside the city, so a route near that drainage needs its own crossing review. No mapped street crossing of a named stream is recorded inside Talco.

Do I need a permit to bore in Talco or Titus County?

For work in the right of way of US 271, Loop 96 or FM 71, the line owner needs a TxDOT utility permit reviewed by the TxDOT Atlanta District. The utility owner submits the application through RULIS; we prepare the bore plan and profile and work under the permit issued to that owner. TxDOT rules require boring or tunneling beneath existing highway pavement, and the permit sets the required cover. Talco is an incorporated city, so we coordinate street ownership before directional boring beneath McLean Street. No railroad is mapped nearby. If a route crosses Sanders Slough or another water feature, planning checks whether U.S. Army Corps of Engineers jurisdiction applies.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Whose lines are already buried near the City of Talco water system?

The City of Talco owns the public water system, which uses groundwater wells and reports 237 service connections serving 711 people. That makes existing water lines a key locate and potholing concern on Talco streets. Electric service reported in Titus County includes Southwestern Electric Power, Texas New Mexico Power, Bowie Cass Electric Cooperative and Wood County Electric Cooperative. Before planning an electric conduit bore along Broad Street, we confirm the line owner for the specific address.

Line ownerWhat it isSourceSize
City of TalcoPublic water systemGroundwater wells237 connections, 711 people served
Southwestern Electric Power, Texas-New Mexico Power, Bowie-Cass Electric Cooperative and Wood County Electric CooperativeElectric utilities reporting service in Titus CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Talco’s median housing year at 1972; 44 percent of homes were built before 1960, 37 percent from 1960 to 1999 and 19 percent in 2000 or later. A replacement route on Broad Street may meet older buried lines, while a new service has a different path to plan. Before drilling near any marked utility, we hydrovac pothole it because locate paint shows position, not depth.

Reel of yellow polyethylene gas pipe on a trailer staged for a directional bore
A reel of yellow polyethylene gas pipe on a trailer, staged for a directional bore.

Do you cover Talco and nearby Mount Pleasant?

Talco is an incorporated city in Titus County, at an elevation of 361 feet and covering 0.77 square miles. Its ZIP code is 75487. Bogata is 9.8 miles northwest, Winfield is 13.7 miles south, Miller’s Cove is 14.4 miles south and Mount Vernon is 14.6 miles southwest. Mount Pleasant, the county seat and nearest larger city, is 16.0 miles southeast. From our Yukon, Oklahoma yard, Talco is 270 road miles and a 5.2 hour drive, which can affect crew mobilization for a route on US 271.

Places near Talco

What would we bore near Broad Street in Talco?

  • Highway crossing: A route beneath US 271 keeps the roadway intact, with the line owner arranging the TxDOT right of way permit.
  • Water service: A new connection near the City of Talco system needs a route planned around existing groundwater lines and potholes.
  • Fiber conduit: A bore along McLean Street can carry conduit beneath pavement without opening a continuous trench through the street.
  • Street replacement: A new sewer or water route near Broad Street can pass beneath driveways and reduce open cuts along the route.
  • Drainage crossing: A route near the unnamed drainage in Talco needs depth and fluid planning to protect the channel and nearby ground.
  • Farm route: A service following FM 71 can be planned around roadway access, existing utilities and the clay mapped below Talco.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What should I send for a Talco bore near Farm Road 71?

For a route near Farm Road 71, send the address or map pin, what will go in the ground, the pipe or conduit size and the footage. A sketch or plans help us see where the route meets pavement, drainage or other utilities. A route along McLean Street also helps us identify the local street context before building the bore plan.

A short, accessible service route on Broad Street with a clear path and known utilities is simpler to plan. The answer changes with footage, pipe or conduit size, Crockett clay, utilities to expose, pavement, pits, excavator time and sand backfill. A crossing near US 271 or drainage by Sanders Slough adds planning details. Since Talco is 270 road miles from Yukon, mobilization also matters, and high profile or emergency work can change the scope.

Questions people ask about boring in Talco

Does Trinity take directional boring jobs in Talco, Titus County, and how are crews assigned?

Yes. Trinity takes directional boring work in Talco, and the job can be staffed by our own crews or crews from partner drilling contractors we have vetted. Our Yukon office remains the point of contact from the first call through the bore log, whether the route follows US 271 or a local street.

Who runs Talco’s public water system in Titus County, and does it use groundwater wells?

In Titus County, we plan around the City of Talco’s public water system, which is supplied by groundwater wells. Talco’s public records list 237 service connections and 711 people served, figures we consider when planning underground work. If a proposed bore approaches those lines on Broad Street or another Talco route, we plan to locate and expose marked utilities before drilling nearby.

Which electric companies report service in Talco, Titus County, and who confirms conduit specs?

Titus County electric service is reported by Southwestern Electric Power, Texas New Mexico Power, Bowie Cass Electric Cooperative and Wood County Electric Cooperative. Those records do not identify the provider at every Talco address. We confirm the owner of the line along a route such as Loop 96 before planning an electric conduit bore and checking its specifications.

Who is responsible for Talco streets like 5th Street, and can a bore avoid cutting them?

Talco is incorporated, so its city streets, including 5th Street, belong to the city. Directional boring can pass beneath pavement and driveways without opening a trench along the route. The route still needs utility locates and potholes so the drill can be planned around buried lines.

How old are Talco homes near Broad Street, and what does that mean for replacement bores?

The American Community Survey 2019 to 2023 estimates put Talco’s median housing year at 1972, with 44 percent of homes built before 1960. That age can mean a replacement route near Broad Street needs careful checks for existing utilities, but it does not establish the age or location of a particular buried line.

Does Crockett soil in Talco corrode steel, and what pipe should I use?

The USDA soil survey maps high steel corrosion risk across 100 percent of Talco, including areas mapped as Crockett silt loam. When boring near 5th Street, we leave steel casing or tracer wire coating choices to the line owner. HDPE is not subject to that soil corrosion concern, but the owner chooses the material for the route.

Does Talco’s distance from Mount Pleasant change a bore mobilized from Yukon?

Talco is 270 road miles and a 5.2 hour drive from our Yukon, Oklahoma yard; Mount Pleasant is 16.0 miles southeast of Talco. That distance can affect mobilization planning for a job on US 271. The route, access, materials and site conditions still determine the work plan.

How much 811 notice is needed for a Talco bore near McLean Street, and what if marks fade?

For a bore near McLean Street, submit a locate request through Texas811 at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. If a Loop 96 bore start shifts more than 14 days past the original notice, we submit a new request. Before continuing near Crawford Avenue, we have worn or moved marks refreshed through Texas811.

How do US 271 crossings affect directional boring costs in Talco?

The route details drive the price for a bore near US 271. Length, pipe size, Crockett clay, pavement, utilities to expose, drainage crossings, pits and backfill all affect the work. Mobilization from Yukon also matters because Talco is 270 road miles from our yard. A sketch or plans help show which conditions apply.

Where the Talco facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Talco

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Talco, Texas

Type the address of your job in Talco. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Talco

All counties: Texas county list.