trinityboringsolutions.com

Wellman Texas Directional Boring: Patricia Soil, US 62 and Lubbock and Western Railway

Quick Answer: Can you get a line under US 62 or the Lubbock and Western Railway without cutting it? Trinity Boring Solutions does directional boring, also called horizontal directional drilling (HDD), in Wellman, Texas, for routes like those. Wellman is 404 road miles from our Yukon, Oklahoma main office, with Gaines Avenue among the local streets a route may reach. Patricia soil is sandy at the surface, so the bore needs support against the hole caving behind the drill. Boring keeps 8th Street pavement uncut, with entry and exit pits set in dirt.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Wellman bores at a glance

  • Incorporated city in Terry County, Texas. Population 228 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 404 miles, about 7.9 hours of driving.
  • Ground: Patricia soil is mapped on 100 percent of the area, with sandy clay loam about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: US 62, US 385, FM 213 and FM 303. State permit office: TxDOT Lubbock District.
  • Railroad track inside the boundary: Lubbock and Western Railway, with 3 mapped street and rail crossings.
  • Public water: City of Wellman, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Which contractor handles bores by the Lubbock and Western Railway in Wellman?

Trinity Boring Solutions takes directional boring work in Wellman, an incorporated city in Terry County with 228 residents in the Census Bureau Vintage 2024 estimate. Can you get a line under a road or track without cutting it? We can bore water, sewer, gas, electric conduit and fiber beneath Gaines Avenue, 8th Street or a route near the Lubbock and Western Railway, with the crossing plan matched to the site.

Our main office is in Yukon, Oklahoma, and Wellman work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our family business began in 1965, and since 1982 we have focused on directional boring. That experience helps us plan for the sandy Patricia soil mapped around Wellman streets and crossings such as US 62.

Trinity Boring Solutions Vermeer D24x40 directional drill set up for a bore
Our Vermeer D24x40 directional drill set up for a bore. Photos on this page are from our jobs in Oklahoma and Texas.

What does Patricia soil mean for boring in Wellman?

The USDA soil survey maps Patricia and Amarillo loamy fine sands across Wellman, with loamy fine sand at the surface and sandy clay loam at about 40 inches. The survey maps the area as sandy at that depth, with an average clay content of 23 percent. These are mapped soil patterns, not test borings, so the route still needs field checks. For a bore near Gaines Avenue, the sandy upper ground can cut readily but may cave behind the drill head unless drilling fluid supports the hole.

USDA soil survey, inside the Wellman city limitsWhat is mapped
Soil series mappedPatricia 100 percent
Texture at the surfaceloamy fine sand 100 percent
Texture about 40 inches downsandy clay loam 100 percent
Engineering class about 40 inches downclayey sand (SC) 100 percent
Average clay content about 40 inches down23 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches0 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel0 percent of the area

The USDA soil survey does not map bedrock within the top five feet, seasonal water tables within 60 inches or flood prone soils in Wellman. That lowers the mapped concern for shallow rock or persistently wet pits, but it cannot rule out deeper rock or local conditions. In Wellman’s sandy clay loam, we assess steel corrosion conditions because high corrosion risk is not mapped. The geologic map shows sand sheet deposits of Holocene age and Cenozoic sedimentary rocks of Paleocene age; a route near US 385 still needs its ground checked as it advances.

How do we bore through Wellman’s sandy clay loam?

At about 40 inches, Wellman is mapped as sandy clay loam, a mix that calls for support against sand caving and attention to the clay in the cut. A route near 8th Street is planned around the actual utilities and pavement.

  1. At a Gaines Avenue route, we check the Patricia soil conditions and set the entry and exit pits in dirt so the street surface stays intact.
  2. The sandy upper layer can fall in behind the bit, so we use drilling fluid to support the hole and ream in stages before pulling pipe.
  3. Near a marked water or electric line in Wellman, we hydrovac pothole it first; paint shows location, not depth.
  4. As a bore advances beneath 8th Street, a walkover locator tracks the head from the surface while we log depth and pitch.
Trinity Boring Solutions water trailer supplying water for bentonite drilling fluid on a sleeve bore in northeast OKC
Our water trailer feeding the bentonite drilling fluid mix on a sleeve bore in northeast Oklahoma City.

Which roads and tracks shape a Wellman bore near 8th Street?

Wellman has US 62, US 385, FM 213 and FM 303 within its limits, so a highway route needs a different plan from a short street crossing. 8th Street is the longest named street at 0.65 miles in the city; Gaines Avenue runs 0.58 miles, and 7th Street runs 0.42 miles. A bore can pass beneath their pavement without opening a trench across the driving surface, with pits placed in dirt beyond the crossing.

CrossingTypeMapped extentWho has a say
US 62US highway1.3 roadway miles insideState highway office
US 385US highway1.3 roadway miles insideState highway office
FM 213State highway0.9 roadway miles insideState highway office
FM 303State highway0.6 roadway miles insideState highway office
Lubbock and Western RailwayRailroad1.23 track miles insideThe railroad
Swipe the table sideways to see every column.

The Lubbock and Western Railway has 1.23 track miles within Wellman, and public mapping shows 3 street and rail crossings in the city. A bore beneath its track needs the railroad’s crossing agreement before that route is set. No named streams or lakes and ponds are mapped within the city or within one mile, so there is no mapped creek crossing to plan around near 8th Street.

Who approves a Wellman bore in Terry County?

For work in the right of way of US 62, US 385, FM 213 or FM 303, the line owner, not the driller, submits the utility application through TxDOT’s RULIS system. The TxDOT Lubbock District reviews it, and we give the owner the bore plan and profile for its filing. For Wellman highway pavement crossings, we bore or tunnel beneath the existing pavement as TxDOT rules require. Electric and communication lines need 60 inches of cover at a crossing and 48 inches along the right of way; the specified cover differs for water and pressurized sewer. A Wellman city street is under city authority, while a crossing of the Lubbock and Western Railway needs that railroad’s agreement. No mapped stream crossing is indicated in Wellman.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Whose lines may a Wellman bore meet near the City of Wellman?

The City of Wellman public water system uses groundwater wells and reports 94 service connections serving 200 people. Electric utilities reporting service in Terry County are Oncor Electric Delivery Company, Southwestern Public Service and Lyntegar Electric Cooperative. Those records do not identify the electric provider at every Wellman address, so we confirm the line owner before planning a conduit bore. That check matters along streets such as Gaines Avenue, where an existing water or electric line can affect the bore path.

Line ownerWhat it isSourceSize
City of WellmanPublic water systemGroundwater wells94 connections, 200 people served
Oncor Electric Delivery Company, Southwestern Public Service and Lyntegar Electric CooperativeElectric utilities reporting service in Terry CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Wellman’s median housing year at 1963: 42 percent of homes were built before 1960, 52 percent from 1960 to 1999 and 6 percent in 2000 or later. That age mix can mean a replacement route near 6th Street differs from a new service connection. Paint shows a marked line’s position, not its depth, so we hydrovac expose marked utilities before drilling near the path, including lines near the City of Wellman water system.

Hydrovac truck and boring equipment staged beside an airport taxiway for utility daylighting in Oklahoma City
Our hydrovac truck and boring equipment beside an airport taxiway in Oklahoma City, set up to expose a utility crossing.

Do you cover Wellman and nearby Loop?

Wellman is an incorporated city in Terry County, at an elevation of 3,344 feet and covering 0.34 square miles. We plan underground boring in Wellman using its ZIP codes, 79378 and 79316, to identify the location. Loop is 9.2 miles south, Seagraves is 10.8 miles southwest, and Brownfield is 12.6 miles northeast. Brownfield is also the Terry County seat and the nearest larger city listed. Our Yukon, Oklahoma yard is 404 road miles away, a 7.9 hour drive, so that distance is part of planning a route near US 62 or Gaines Avenue.

Places near Wellman

What kinds of bores come up near Gaines Avenue in Wellman?

  • Highway crossing: A bore beneath US 62 can keep the roadway intact, with the route and right of way handled through the applicable TxDOT process.
  • Water service: A new or replacement line near the City of Wellman system can be routed beneath Gaines Avenue after nearby marked utilities are exposed.
  • Fiber conduit: A conduit route along 8th Street can pass beneath the pavement without an open trench across the street.
  • Rail crossing: A route beneath the Lubbock and Western Railway needs the railroad’s agreement before the crossing plan is set.
  • Street connection: A water, sewer or electric conduit bore near 6th Street can use pits in dirt on either side of the crossing.
  • Farm and acreage service: A longer line approaching Wellman from the direction of Loop can be planned around its material, size and route.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What drives the price of a Wellman bore under US 62?

For a Wellman quote, first share where the work is, such as an address or map pin near US 62. Then tell us what goes underground, such as water or fiber, how large the pipe or conduit is, and how long the run is. A sketch or plans showing a route toward 8th Street or the railway help us understand the crossing before we plan it.

A short route in Patricia soil with clear access is simpler to plan than a long crossing beneath US 62 or the Lubbock and Western Railway. Price reflects bore length and pipe or conduit size, the soil and any rock, the number of utilities to expose, and concrete or pavement. Pits, excavator time, sand backfill and emergency or high profile work also affect the scope. Wellman’s 404 road miles from Yukon can add mobilization planning.

Questions people ask about boring in Wellman

Does Trinity take directional boring jobs in Wellman and Terry County?

Yes, Trinity Boring Solutions takes directional boring jobs in Wellman and Terry County, with work staffed by its own crews and crews from vetted partner drilling contractor yards. The Yukon main office coordinates the job from first call through bore log. For a crossing near US 62, the route and any required approvals are planned for that specific location.

What do older homes near Gaines Avenue mean for a Wellman replacement bore?

Wellman’s median housing year is 1963, and the American Community Survey estimates 42 percent of homes were built before 1960. Older streets such as Gaines Avenue may call for a replacement route rather than a new service connection. We locate and expose marked utilities on the planned path before drilling near them.

What does Patricia soil mean for a bore in Wellman?

The USDA soil survey maps Patricia and Amarillo loamy fine sands in Wellman, with sandy clay loam at about 40 inches. The mapped ground is sandy at that depth, so the bore can cut readily but needs fluid support to limit cave in behind the drill. The survey is not a site specific test boring.

Will a Wellman bore hit rock below 6th Street?

Bedrock is not mapped in the top five feet of Wellman, but that does not settle conditions deeper along 6th Street. The geologic map shows Holocene sand sheet deposits and Paleocene Cenozoic sedimentary rocks. As we advance a bore beneath existing highway pavement in Wellman, we check ground conditions instead of relying on a map alone.

Who approves a Wellman bore under US 62?

For a bore in the US 62 right of way, the utility owner applies through TxDOT’s RULIS system, and the TxDOT Lubbock District reviews the application. We prepare the bore plan and profile for the owner’s submission. TxDOT rules require a bored or tunneled installation beneath existing highway pavement.

What does a Wellman bore under the Lubbock and Western Railway need?

A crossing beneath the Lubbock and Western Railway needs an agreement from the railroad that owns the track. The agreement sets crossing conditions, including casing, depth and flagging. Wellman has 1.23 track miles within the city, so the proposed route has to be checked against the actual track crossing.

What bore sizes and lengths can Trinity handle for a Wellman job near 6th Street?

For a job near 6th Street, Trinity handles lines from 3/4 inch service lines up to 48 inch casing, with bore lengths from 10 feet to 5,000 feet. The needed size and length depend on what the route has to carry and where the entry and exit pits can go.

How much 811 notice does a Wellman bore near 8th Street need?

For a bore near 8th Street, Texas811 needs the locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before it. If the start slips more than 14 days past the original notice, make a new request; worn or moved marks must be refreshed before work continues.

What affects the cost of a Wellman directional bore under US 62?

A Wellman bore under US 62 is priced for its actual scope, not just its length. The pipe size, Patricia soil, pavement, utility exposures, pit and excavator needs, backfill, and any rock can change the work. Crossing the Lubbock and Western Railway or mobilizing from Yukon also affects planning.

Where the Wellman facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Wellman

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Wellman, Texas

Type the address of your job in Wellman. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Wellman

All counties: Texas county list.