Loop Texas Directional Boring: Patricia Fine Sand, FM 303 and Texas State Highway 83
Quick Answer: FM 303 and Texas State Highway 83 run through Loop, where Trinity Boring Solutions provides directional boring, also called horizontal directional drilling (HDD), for crossings and utility routes. Tate Street is among the named local streets, and 15.79 public road centerline miles are mapped inside the community. Loop is 413 road miles from our Yukon yard, with mobilization considered alongside the local route. Patricia fine sand is common, so the open bore needs support against caving.
Loop bores at a glance
- Unincorporated community in Gaines County, Texas. Population 216 (2020 Census count).
- Road distance from our Yukon, Oklahoma main office: 413 miles, about 8.2 hours of driving.
- Ground: Patricia soil is mapped on 32 percent of the area, with sandy clay loam about 40 inches down.
- Rock: no bedrock is mapped in the top 60 inches.
- Highways inside the boundary: FM 303 and Texas State Highway 83. State permit office: TxDOT Lubbock District.
- Railroad track inside the boundary: none mapped.
- Public water: Loop Water Supply Corporation, groundwater wells.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Which contractor handles directional boring across FM 303 in Loop?
The 2020 Census counted 216 people in Loop, an unincorporated community in Gaines County, so local streets are not managed by a city government. Along FM 303, Tate Street and School Road, our crews can bore routes for water, sewer, gas, electric conduit or fiber, with the alignment shaped by the line location and access.
Our main office is in Yukon, Oklahoma, and Loop work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. A 3/4 inch service line near 1st Street and larger casing work beneath FM 303 sit within our 3/4 inch to 48 inch range. Our family business began in 1965 and has done directional boring since 1982, with the job size shaped by the route.

What ground should a Loop bore expect in Patricia soil?
The USDA soil survey maps Patricia fine sand across 32 percent of Loop, while fine sandy loam makes up 47 percent of mapped surface texture and fine sand another 33 percent. At about 40 inches below the surface, sandy clay loam is mapped under 56 percent of the community, and average clay content at that depth is 23 percent. We treat Loop’s Patricia and Arvana soil patterns as mapped context, not as test borings. For a route near FM 303, the sandy surface can loosen behind the drill head, while deeper mixed texture calls for checking returns and steering as conditions change.
| USDA soil survey, inside the Loop mapped community boundary | What is mapped |
|---|---|
| Soil series mapped | Patricia 32 percent, Arvana 22 percent, Sharvana 17 percent, Amarillo 16 percent and Midessa 7 percent |
| Texture at the surface | fine sandy loam 47 percent, fine sand 33 percent and loamy fine sand 20 percent |
| Texture about 40 inches down | sandy clay loam 56 percent, very gravelly loam 22 percent and extremely gravelly sandy loam 17 percent |
| Engineering class about 40 inches down | clayey sand (SC) 38 percent, lean clay (CL) 23 percent and clayey gravel (GC) 22 percent |
| Average clay content about 40 inches down | 23 percent |
| Bedrock mapped within 60 inches | None mapped |
| Seasonal water table within 60 inches | 0 percent of the area |
| Flood prone soils | 0 percent of the area |
| High corrosion risk for uncoated steel | 0 percent of the area |
Along Texas State Highway 83 in Loop, we see no bedrock mapped in the top five feet, though deeper ground may differ. The USDA soil survey maps no seasonal water table, flood prone soils or high steel corrosion risk. That reduces mapped concerns for wet pits and steel materials, though the actual bore path still needs field review. The geologic map shows Holocene sand sheet deposits above mapped Paleocene Cenozoic sedimentary rocks; the shallow sand can cave behind the bit, so staged reaming and fluid support matter near Tate Street.
How do crews bore Loop ground with sandy clay loam?
Loop’s Patricia fine sand and sandy clay loam mapped at about 40 inches call for a bore plan that supports loose ground and tracks changing texture. FM 303 pavement is kept intact by boring beneath it.
- Patricia fine sand can fall in behind the bit, so we use drilling fluid to support the bore and stage the reaming before pulling pipe.
- Where sandy clay loam is mapped at about 40 inches, we watch returns and steering as the bore moves between sandy and more cohesive material.
- Before drilling near a marked line along Tate Street, we hydrovac pothole it because surface marks show position but not burial depth.
- At FM 303, we track the drill head from the surface and log depth and pitch so the crossing stays on its planned path.

Which roads and other crossings matter for a Loop bore near FM 303?
FM 303 and Texas State Highway 83 run through the mapped Loop community, with 2.0 mapped roadway miles of each inside it. The longest named streets are FM 303 at 2.01 miles, Tate Street at 0.32 miles, School Road at 0.18 miles and 1st Street at 0.13 miles. A crossing beneath either state road needs a bore plan suited to the highway right of way. The named streets help define access and tie in points, while the route must also avoid marked buried lines.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| FM 303 | State highway | 2 roadway miles inside | State highway office |
| Texas State Highway 83 | State highway | 2 roadway miles inside | State highway office |
No railroad is mapped inside Loop or within 1 mile outside the community, and no mapped street and rail crossing appears here. No streams are mapped inside or within 1 mile outside Loop, and no street crossing of a named stream is mapped. For a bore route in Gaines County near Loop, we account for no lakes or ponds mapped within 1 mile. That leaves FM 303 and the local streets as the crossings to evaluate first, with pavement kept uncut where boring is used.
Who approves a Loop bore along FM 303 in Gaines County?
Loop is an unincorporated community in Gaines County, so there is no city government to permit local streets; the responsible county or state authority depends on the road. FM 303 and Texas State Highway 83 are state highways, and work in their right of way needs a TxDOT utility permit reviewed by the TxDOT Lubbock District. The utility owner, not the drilling contractor, files through TxDOT’s RULIS system, and we prepare the bore plan and profile for its application. TxDOT rules require boring or tunneling beneath existing highway pavement, with the crossing depth and casing requirements set for the line type.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Whose buried lines are near Loop Water Supply Corporation routes?
Loop Water Supply Corporation uses groundwater wells and reports 102 service connections serving 300 people. That local system is a useful starting point when planning a water route near School Road, but the specific existing line still needs to be identified. Oncor Electric Delivery Company, Southwestern Public Service, Lea County Electric Cooperative and Lyntegar Electric Cooperative report electric service in Gaines County. For a conduit bore near FM 303, we confirm which company owns the line before setting the route or conduit specifications.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| Loop Water Supply Corporation | Public water system | Groundwater wells | 102 connections, 300 people served |
| Oncor Electric Delivery Company, Southwestern Public Service, Lea County Electric Cooperative and Lyntegar Electric Cooperative | Electric utilities reporting service in Gaines County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put Loop’s median housing year at 1962; 46 percent of homes were built before 1960 and 54 percent from 1960 to 1999. That age profile makes replacement connections along Tate Street a plausible project type, but the route and line condition must be checked rather than assumed. We hydrovac pothole every marked utility on the bore path before drilling near it; for example, a marked line beneath School Road must be exposed before the drill approaches.

Where is Loop in relation to Seagraves and Seminole?
Loop is in Gaines County, Texas, at an elevation of 3,259 feet, and the mapped community covers 3.54 square miles. ZIP code 79342 serves the area, where FM 303 and Texas State Highway 83 are the main mapped state routes. Seagraves is 9.0 miles west, Wellman is 9.2 miles north, and Seminole is 19.0 miles southwest; Seminole is both the nearest larger city and the county seat. Our Yukon yard is 413 road miles away, an 8.2 hour drive, so that distance is part of planning work near 1st Street.
Places near Loop
- Directional boring in Seagraves: 9 miles west
- Directional boring in Wellman: 9.2 miles north
- Directional boring in Welch: 17 miles east
- Directional boring in Seminole: 19 miles southwest
- Directional boring in Brownfield: 19.8 miles northeast
Which jobs call for a bore near Tate Street in Loop?
- Highway crossing: A bore beneath FM 303 or Texas State Highway 83 keeps the existing pavement intact while placing a utility across the road.
- Water service: A connection near Loop Water Supply Corporation routes groundwater service toward a property without opening the full length of the street.
- Fiber route: A fiber bore along Tate Street can pass beneath the roadway and connect a service without an open cut across the pavement.
- Utility replacement: A new line near School Road can bypass an aging buried segment, with marked utilities exposed before the drill approaches.
- Conduit crossing: Electric conduit beneath FM 303 needs a route coordinated with the line owner and the TxDOT right of way permit.
- Service connection: A short line near 1st Street can connect a building to a nearby utility while keeping the surface route intact.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
How do I get a quote for a Loop bore near 1st Street?
For a Loop quote, send the address or map pin, what will go underground, the pipe or conduit size and footage; a sketch or plans help. A route near 1st Street can differ from a crossing beneath FM 303, so the exact location and surface conditions are useful from the start.
The biggest local variable is the ground: Patricia fine sand can cave behind the bit, which affects fluid support and reaming. The number of utilities to expose, pipe size and bore length also shape the work. Pavement beneath FM 303, pits, excavator time and sand backfill can add scope, while creek or drainage crossings are not mapped in Loop. Mobilization matters because the Yukon yard is 413 road miles away; emergency or high profile work can also change the plan.
Questions people ask about boring in Loop
Does Trinity Boring Solutions take jobs in Loop and Gaines County, and who staffs them?
Yes. We take directional boring work in Loop, and crews from our own team or vetted partner drilling contractors can staff the job. Our Yukon main office remains the point of contact, so the customer deals with Trinity from the first call through the bore log, whether the site is near FM 303 or Tate Street.
Who owns electric lines in Loop, Gaines County, and who confirms conduit specs?
The line owner depends on the address. Oncor Electric Delivery Company, Southwestern Public Service, Lea County Electric Cooperative and Lyntegar Electric Cooperative report service in Gaines County, but that does not identify the provider at every Loop property. We confirm the owner before planning an electric conduit bore near FM 303, and the owner confirms its line requirements.
Who is responsible for School Road in Loop, and does a bore require cutting it?
Loop has no city government because it is an unincorporated community, so the county or state is responsible according to the road. School Road is a local named street, not one of the mapped state highways. A directional bore can pass beneath the roadway without cutting its surface, subject to the route and applicable approval.
Does older housing near Tate Street in Loop mean buried lines need replacement bores?
Not automatically, but older housing can make replacement work relevant. The American Community Survey 2019 to 2023 estimates put the median housing year at 1962, and 46 percent of homes were built before 1960. A line near Tate Street needs to be located and assessed before deciding whether a replacement bore is suitable.
What ground does a Loop bore cross in Patricia soil?
The USDA soil survey maps Patricia fine sand over 32 percent of Loop, with sandy clay loam mapped under 56 percent at about 40 inches. Sand may cave behind the drill head, so staged reaming and fluid support help hold the bore open. These mapped patterns are not a substitute for checking the actual route.
Will a directional bore in Loop hit rock in mapped Amarillo soils?
The mapped soil data show no bedrock within the top five feet, but that does not rule out deeper rock along a route near FM 303. The geologic map shows Holocene sand sheet deposits and Paleocene Cenozoic sedimentary rocks. Field conditions and bore depth determine what the drill encounters.
What bore sizes and lengths can Trinity handle for a Loop job near 1st Street?
Our equipment range covers 3/4 inch service lines up to 48 inch casing, with bore lengths from 10 feet to 5,000 feet. A short connection near 1st Street and a longer utility route beneath FM 303 are both within that range; the site access and ground still shape the plan.
How much notice does Texas811 need for a Loop bore near FM 303, and what if marks move?
For a bore near FM 303, Texas law requires a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before it. If our FM 303 start slips more than 14 days past the original notice, we make a new request. Before continuing along Tate Street, we refresh worn or moved marks through Texas811.
What affects the cost of a directional bore in Loop under FM 303?
The main factors are bore length and size, Patricia soil conditions, marked utilities that must be exposed, and pavement or other surface constraints at FM 303. Pits, excavator time, sand backfill and drainage crossings also affect the scope. The 413 road miles from Yukon affect mobilization, and emergency or high profile work can change the plan.
Where the Loop facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Loop
- U.S. Census Bureau, TIGER/Line 2024: Loop boundary, roads, rail lines and streams
- U.S. Census Bureau, 2020 Census: Loop population count
- U.S. Census Bureau, American Community Survey 2019 to 2023: Loop housing units and year built
- Macrostrat geologic map compilation: map units under Loop
- U.S. EPA Safe Drinking Water Information System: public water systems serving Loop
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Gaines County
- U.S. Geological Survey, Elevation Point Query Service: Loop elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Loop
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Loop
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Loop, Texas
Type the address of your job in Loop. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Loop
All counties: Texas county list.
