trinityboringsolutions.com

Ballinger Texas Directional Boring: Quanah Clay Loam, US 67, Elm Creek

Quick Answer: Where a Ballinger line has to get beneath US 67 or Elm Creek, Trinity Boring Solutions handles directional boring, also called horizontal directional drilling (HDD), in Texas. The Yukon main office is 351 road miles from Ballinger, so mobilization has to be planned alongside a Texas Pacifico track crossing. Quanah clay loam is common here and can cling to the reamer or grip pipe. We plan staged reaming and a same day pull when the route calls for it.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Ballinger bores at a glance

  • County seat of Runnels County, Texas. Population 3,530 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 351 miles, about 6.9 hours of driving.
  • Ground: Quanah soil is mapped on 29 percent of the area, with clay loam about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 11 percent of the area.
  • Highways inside the boundary: US 67, US 83, Texas State Highway 158, FM 2887 and FM 2133. State permit office: TxDOT San Angelo District.
  • Railroad track inside the boundary: Texas Pacifico, with 7 mapped street and rail crossings.
  • Named streams inside the boundary: Elm Creek, Colorado River, Elm Creek Lake and Sand Branch.
  • Public water: City of Ballinger, surface water.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who handles directional boring near Elm Creek in Ballinger?

A line route in Ballinger can put water, sewer, gas, electric conduit or fiber beneath Elm Creek, a street or a highway, and we take on that directional boring work. Ballinger is in Runnels County, where the Census Bureau Vintage 2024 estimate puts the population at 3,530. We scope each bore to its route, line size and ground.

Our main office is in Yukon, Oklahoma, and Ballinger work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore reaches roughly 4,100 feet under the Arkansas River in Tulsa, Oklahoma. That is a measure of reach, not a Ballinger job claim; a route beside Elm Creek is planned for its own crossings, soil and line.

Ditch Witch directional drill rig with a loaded drill rod rack staged at a commercial jobsite
Our Ditch Witch directional drill with a full rack of drill rod staged at a commercial site. Photos on this page are from our jobs in Oklahoma and Texas.

What does the soil survey show beneath Ballinger and Quanah soil?

Quanah is the leading mapped soil series in Ballinger at 29 percent of the area, and the USDA soil survey maps clay loam across 54 percent of the surface. At about 40 inches below ground, clay loam accounts for 56 percent of mapped area and average clay content is 30 percent. Mereta clay loam covers 20 percent, while Quanah clay loam map units account for 18 percent on 0 to 1 percent slopes and 12 percent on moist 1 to 3 percent slopes. For Ballinger boring, we treat sandy ground as unmapped at that depth and verify conditions before setting the crossing path.

USDA soil survey, inside the Ballinger city limitsWhat is mapped
Soil series mappedQuanah 29 percent, Mereta 20 percent, Spur 12 percent, Talpa 11 percent and Miles 10 percent
Texture at the surfaceclay loam 54 percent, loam 17 percent and stony clay loam 11 percent
Texture about 40 inches downclay loam 56 percent, loam 18 percent and sandy clay loam 12 percent
Engineering class about 40 inches downlean clay (CL) 82 percent and clayey sand (SC) 5 percent
Average clay content about 40 inches down30 percent
Bedrock mapped within 60 inches11 percent of the area (11 percent hard rock, 0 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils18 percent of the area
High corrosion risk for uncoated steel1 percent of the area

The USDA soil survey maps bedrock within 60 inches across 11 percent of Ballinger, and that mapped bedrock is hard rather than weathered. Seasonal water tables are not mapped, but flood prone soils cover 18 percent, so routes near Elm Creek need channel and bank planning. High steel corrosion risk is mapped under 1 percent. The Clear Fork Group, of Permian age, includes mudstone, siltstone, sandstone, dolomite, limestone and gypsum; those map units flag possible changes in cutting conditions, not a site specific drilling log.

How do we drill Ballinger’s clay loam and Quanah soil?

Ballinger’s clay loam can hold the hole open but stick to tooling and grip the pipe. We match fluid, reaming stages and pull timing to the route rather than treating every Quanah soil crossing alike.

  1. In Quanah clay loam, we use thinner drilling fluid and ream in stages to limit sticky buildup, then pull pipe the same day the opened hole is ready.
  2. Before drilling near a marked line on a Ballinger route, we expose each marked utility with hydrovac potholing; paint shows its position, not its depth.
  3. We track the drill head from the surface and log depth and pitch, especially where the Clear Fork Group map points to changing rock and soil.
  4. Near Elm Creek, we plan the bore below the channel and set pits back from the bank; the mapped flood prone soils make the crossing profile matter.
Walkover locator at the edge of the wetland on a directional bore at the Cimarron site in Logan County, Oklahoma
Walkover locator at the edge of a wetland on a directional bore in Logan County, Oklahoma.

What could a new Ballinger line cross near US 67?

US 67, US 83, Texas State Highway 158, FM 2887 and FM 2133 all run within Ballinger, so a route may need to pass beneath a highway right of way. Hutchings Avenue is the longest named street at 3.57 miles in the city, followed by Broadway Street at 2.83 miles and 13th Street at 1.89 miles. A bore beneath an existing highway keeps the pavement uncut, while street routes still need their own access and utility checks.

CrossingTypeMapped extentWho has a say
US 67US highway5.2 roadway miles insideState highway office
US 83US highway1.8 roadway miles insideState highway office
Texas State Highway 158State highway2.1 roadway miles insideState highway office
FM 2887State highway0.8 roadway miles insideState highway office
FM 2133State highway0.2 roadway miles insideState highway office
Texas PacificoRailroad2.24 track miles insideThe railroad
Elm CreekStream1.76 channel miles insideChecked for Corps of Engineers jurisdiction
Colorado RiverStream1.44 channel miles insideChecked for Corps of Engineers jurisdiction
Elm Creek LakeStream0.76 channel miles insideChecked for Corps of Engineers jurisdiction
Sand BranchStream0.16 channel miles insideChecked for Corps of Engineers jurisdiction
Rattlesnake CreekStream nearby0.5 miles outsideChecked for Corps of Engineers jurisdiction
Long BranchStream nearby0.6 miles outsideChecked for Corps of Engineers jurisdiction
Los ArroyosStream nearby0.7 miles outsideChecked for Corps of Engineers jurisdiction
Country Club LakeLake or pond19 acres, nearbyChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

Texas Pacifico has 2.24 track miles in Ballinger, and public mapping shows 7 street and rail crossings in the city. Elm Creek runs 1.76 channel miles and the Colorado River 1.44; 6 mapped street crossings meet named streams. Elm Creek Lake also runs within the city, and Country Club Lake is a 19 acre lake outside the limits but within one mile. Each crossing changes where the bore pits and alignment can fit.

Whose approval does a Ballinger bore near Texas Pacifico need?

For a Ballinger bore in a city street, the street is under city jurisdiction; do not assume that a street route also grants access to a state highway or railroad. The line owner, not the driller, submits a TxDOT utility application in the online RULIS system for work on US 67, US 83, Texas State Highway 158, FM 2887 or FM 2133. TxDOT’s San Angelo District reviews it, and we prepare the bore plan and profile for the owner’s filing. Electric and communication lines need 60 inches of cover at highway crossings and 48 inches along the right of way; water needs 60 inches at crossings and 36 inches along it, while pressurized sewer needs 60 inches at crossings. Texas Pacifico track work requires its owner’s crossing agreement. Elm Creek or Colorado River crossings are checked for federal water jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Whose lines are already buried in Runnels County near Ballinger?

The City of Ballinger public water system uses surface water and reports 3,842 service connections serving 3,583 people. That is a useful starting point for a water route, not proof of the line at a particular address. AEP Texas North, Concho Valley Electric Cooperative and Taylor Electric Cooperative report electric service in Runnels County; we confirm the line owner before planning a conduit bore near Broadway Street or another route.

Line ownerWhat it isSourceSize
City of BallingerPublic water systemSurface water3,842 connections, 3,583 people served
AEP Texas North, Concho Valley Electric Cooperative and Taylor Electric CooperativeElectric utilities reporting service in Runnels CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Ballinger’s median housing year at 1956: 64 percent of homes were built before 1960, 34 percent from 1960 to 1999 and 2 percent in 2000 or later. That older housing stock can mean replacement routes as well as new services. We hydrovac pothole every marked utility on the bore path before drilling near it; for a line beneath Hutchings Avenue, that means exposing marked lines along the planned crossing before the drill approaches.

Large HDPE conduit reels staged on a Rotate A Reel trailer for a fiber and utility installation in Oklahoma
HDPE conduit reels on a reel trailer for a fiber and utility installation in Oklahoma.

Where is Ballinger in relation to Rowena and San Angelo?

Ballinger is the Runnels County seat, at an elevation of 1,645 feet, and covers 3.5 square miles. For underground work in Ballinger, we use ZIP code 76821 to identify the service area when coordinating the project. Rowena is 8.5 miles southwest, Winters is 14.5 miles north, and Paint Rock is 15.9 miles south. San Angelo, the nearest larger city, is 35.7 miles southwest. From our Yukon, Oklahoma main office, Ballinger is 351 road miles away and a 6.9 hour drive, which is part of planning equipment mobilization for routes near US 67 or Elm Creek.

Places near Ballinger

What kinds of bores come up near Broadway Street in Ballinger?

  • Highway crossing: A route beneath US 67 or US 83 uses a bore rather than cutting through existing highway pavement.
  • Water service: A new or replacement connection can run from the City of Ballinger water system toward a property along Broadway Street.
  • Fiber drop: Fiber conduit can follow a Hutchings Avenue route beneath pavement and marked utilities instead of opening a street trench.
  • Creek crossing: A line beneath Elm Creek needs a profile planned around the channel and its mapped street crossings.
  • Rail crossing: A route beneath Texas Pacifico track needs the railroad owner’s agreement and crossing details before work is set.
  • River crossing: A Colorado River line needs channel planning and a check for federal water jurisdiction during crossing design.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What should I send to price a Ballinger bore near Hutchings Avenue?

For a Ballinger quote, send the address or map pin, what will go underground, the pipe or conduit size and footage; a sketch or plans help. A route near Hutchings Avenue may need different planning from a shorter service route because mapped street crossings, existing lines and the planned pit locations all affect the work.

The price follows the actual route and scope, with soil and rock first because Ballinger’s clay loam can cling to tooling and mapped hard bedrock may change the cut. Next come line size and length, then exposed utilities and crossings such as US 67, Texas Pacifico track or Elm Creek. Pavement, concrete, pits, excavator time and sand backfill also count. The 351 road miles from Yukon affect mobilization, and emergency or high profile work can add planning demands.

Questions people ask about boring in Ballinger

Does Trinity Boring Solutions take jobs in Ballinger and Runnels County, and who staffs them?

Yes, we take directional boring work in Ballinger and across Texas. The work uses our own crews or crews from satellite yards run by drilling contractors we have vetted, while customers work with Trinity through the bore log. A route near Elm Creek is planned for its own access, crossings and ground.

Can older lines near Broadway Street in Ballinger be replaced by boring?

Yes, a replacement bore can fit an older Ballinger street when the route and existing utilities allow it. The American Community Survey 2019 to 2023 estimates put the median housing year at 1956 and 64 percent of homes before 1960. We expose marked utilities along a Broadway Street bore path before drilling near them.

Will groundwater or flood prone ground affect bore pits by Elm Creek in Ballinger?

Seasonal water tables are not mapped in Ballinger, but flood prone soils cover 18 percent of the city, so an Elm Creek crossing still needs careful pit placement and channel planning. We plan the bore depth below the channel and check whether the crossing falls under U.S. Army Corps of Engineers jurisdiction.

What ground does a Ballinger bore pass through in Quanah soil?

The USDA soil survey maps Quanah as 29 percent of Ballinger’s soil series, with clay loam making up 56 percent of mapped texture at about 40 inches. Average clay content there is 30 percent. Sticky clay loam can load up a reamer, so staged passes and pull timing matter.

How much bedrock is mapped within five feet of the ground in Ballinger?

The USDA soil survey maps bedrock within 60 inches across 11 percent of Ballinger, and the mapped bedrock is hard rather than weathered. The Clear Fork Group includes mudstone, siltstone and sandstone, so the bore route still needs to account for changing material rather than assume uniform soil.

Who approves a Ballinger bore under US 67, and which TxDOT office reviews it?

The line owner files for a utility permit through TxDOT’s RULIS system for work under US 67, and the TxDOT San Angelo District reviews the application. We prepare the bore plan and profile for the owner. Cover depends on line type, and the district may set a different depth in the permit.

Does the distance from San Angelo affect a Ballinger bore mobilized from Yukon?

Our Yukon, Oklahoma main office is 351 road miles and a 6.9 hour drive from Ballinger, shaping our travel schedule. San Angelo is 35.7 miles southwest of Ballinger. The Yukon distance can affect mobilization planning, especially when the route also has a US 67, Texas Pacifico or Elm Creek crossing.

How much Texas811 notice does a Ballinger bore near Hutchings Avenue need?

For a bore near Hutchings Avenue, the locate request goes through Texas811 at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. For a Ballinger start, we make a new request if work slips more than 14 days past the original notice. On Ballinger crossings, we have worn or moved marks refreshed through Texas811 before we continue work.

What affects the cost of a Ballinger directional bore under US 67?

The route and scope determine the price, not a single standard rate. Ballinger’s clay loam and possible hard bedrock affect tooling and time; then line length and size, exposed utilities, US 67 or Texas Pacifico crossings, pavement, pits and excavator time matter. Mobilization from Yukon and creek crossings such as Elm Creek can also change the plan.

Where the Ballinger facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Ballinger

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Ballinger, Texas

Type the address of your job in Ballinger. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Ballinger

Same county: Wingate. All counties: Texas county list.