trinityboringsolutions.com

Snyder Texas Directional Boring: Miles Soil, US 180 and Deep Creek

Quick Answer: The City of Snyder owns the surface water system, while Oncor Electric Delivery Company and Big Country Electric Cooperative report electric service in Scurry County; confirm ownership before a bore near US 180. Trinity Boring Solutions handles directional boring, also called horizontal directional drilling (HDD), in Snyder, Texas, including routes beneath US 180. Snyder is 331 road miles from the Yukon main office, and BNSF Railway crossings affect mobilization planning. The USDA soil survey maps Miles soil across 35 percent of Snyder, and clay loam can hold a hole while sticking to the reamer.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Snyder bores at a glance

  • County seat of Scurry County, Texas. Population 11,151 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 331 miles, about 6.7 hours of driving.
  • Ground: Miles soil is mapped on 35 percent of the area, with clay loam about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 6 percent of the area.
  • Highways inside the boundary: US 180, US 84 Business, US 84, Texas State Highway 208 and FM 1607. State permit office: TxDOT Abilene District.
  • Railroad track inside the boundary: BNSF Railway, with 12 mapped street and rail crossings.
  • Named streams inside the boundary: Deep Creek and South Fork Deep Creek.
  • Public water: City of Snyder, surface water.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Which contractor handles directional boring near Deep Creek in Snyder?

Trinity Boring Solutions handles directional boring in Snyder, where the City of Snyder owns the surface water system and Oncor Electric Delivery Company and Big Country Electric Cooperative report electric service in Scurry County; we confirm the line owner before routing near Deep Creek. The Census Bureau Vintage 2024 estimate lists 11,151 residents. Water, sewer, gas, electric conduit and fiber routes can follow College Avenue or approach US 84, with each path checked against existing marks.

Our main office is in Yukon, Oklahoma, and Snyder work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. A small College Avenue service bore can use 3/4 inch lines, while a larger US 180 crossing may call for casing up to 48 inch. Our family business started in 1965 and has done directional boring since 1982, with bore lengths from 10 feet to 5,000 feet for Snyder routes.

Trinity Boring Solutions Ditch Witch JT922 HDD rig and vacuum excavation truck on a commercial bore in Oklahoma City
Our Ditch Witch JT922 drill and vacuum excavation truck on a commercial bore in Oklahoma City. Photos on this page are from our jobs in Oklahoma and Texas.

What ground should we expect when drilling in Snyder near Miles soil?

The USDA soil survey maps Miles soil across 35 percent of Snyder, with Sagerton also covering 35 percent; together they signal that the route deserves a soil specific plan. At about 40 inches below the surface, clay loam is mapped under 57 percent of the area, sandy clay loam under 36 percent and clay under 6 percent. Average clay content at that depth is 31 percent. These are mapped patterns, not test borings, so a College Avenue route still needs field checks before we set the reaming plan.

USDA soil survey, inside the Snyder city limitsWhat is mapped
Soil series mappedMiles 35 percent, Sagerton 35 percent, Snyder 9 percent, Spur 8 percent and Vernon 4 percent
Texture at the surfaceclay loam 49 percent, fine sandy loam 36 percent and loam 10 percent
Texture about 40 inches downclay loam 57 percent, sandy clay loam 36 percent and clay 6 percent
Engineering class about 40 inches downlean clay (CL) 62 percent and clayey sand (SC) 35 percent
Average clay content about 40 inches down31 percent
Bedrock mapped within 60 inches6 percent of the area (0 percent hard rock, 6 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils11 percent of the area
High corrosion risk for uncoated steel8 percent of the area

Bedrock is mapped within 60 inches across 6 percent of Snyder, with typical bedrock depth listed as 26 inches, so shallow rock may affect some alignments but not every one. Seasonal water table is not mapped within 60 inches, while flood prone soils cover 11 percent; Deep Creek routes need channel depth considered. High steel corrosion risk is mapped across 8 percent, a concern for casing and tracer wire that the line owner should address. The USDA map also shows Holocene Alluvium along streams, with sand, silt, clay and gravel that can vary by location.

How do we bore Snyder clay loam around Deep Creek?

For Snyder’s mapped clay loam, we plan the fluid and reaming sequence around the ground and the crossing. A College Avenue route starts with utility exposure and a tracked pilot bore, not assumptions from the soil map.

  1. We hydrovac pothole each marked utility along a College Avenue bore path before the drill gets close; paint gives position, not depth.
  2. Miles and Sagerton soils cover much of Snyder, so we use a measured fluid plan and staged reaming to manage sticky clay loam.
  3. Along Deep Creek, we plan the bore depth beneath the channel and check for Corps jurisdiction while tracking the drill from the surface.
  4. Near the 6 percent of Snyder mapped with bedrock within 60 inches, we watch the drill’s depth and pitch as the ground changes.
Drilling fluid returns at the entry as the Vermeer D24x40 S3 drills a 385 foot sandstone rock bore in Guthrie, Oklahoma
Drilling fluid coming back to the entry pit as our Vermeer D24x40 drills a 385 foot bore in Guthrie, Oklahoma.

Which roads, tracks or creeks could a Snyder bore cross near US 180?

US 180, US 84 Business and US 84 run through Snyder, along with Texas State Highway 208 and FM 1607, so a route may involve state highway right of way. US 180 has 5.9 mapped roadway miles in the city. Among named streets, College Avenue runs 4.92 miles, 37th Street 3.64 miles and Coliseum Drive 2.84 miles. Their length makes route selection important: a bore can keep pavement intact, but the entry and exit pits still need workable ground on each side.

CrossingTypeMapped extentWho has a say
US 180US highway5.9 roadway miles insideState highway office
US 84 BusinessUS highway5.7 roadway miles insideState highway office
US 84US highway5.4 roadway miles insideState highway office
Texas State Highway 208State highway4.5 roadway miles insideState highway office
FM 1607State highway3.9 roadway miles insideState highway office
Texas State Highway 350State highway2.2 roadway miles insideState highway office
FM 1673State highway0.7 roadway miles insideState highway office
FM 1605State highway0.6 roadway miles insideState highway office
FM 2763State highway0.5 roadway miles insideState highway office
BNSF RailwayRailroad5.75 track miles insideThe railroad
Deep CreekStream2.02 channel miles insideChecked for Corps of Engineers jurisdiction
South Fork Deep CreekStream1.09 channel miles insideChecked for Corps of Engineers jurisdiction
Canyon CreekStream nearby0.6 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

BNSF Railway has 5.75 track miles inside Snyder, and public mapping shows 12 street and rail crossings. Any proposed track crossing needs coordination with BNSF Railway before the bore plan is set. Deep Creek runs 2.02 channel miles in the city and South Fork Deep Creek 1.09 miles; public mapping also shows 13 street crossings of named streams. A creek alignment calls for depth planning below the channel and a check for U.S. Army Corps of Engineers jurisdiction. Around Snyder, we plan underground routes with no mapped lakes or ponds within one mile.

Whose approval does a Snyder bore need near BNSF Railway?

For Snyder work beneath US 180, US 84 or another state route, the utility that owns the line files the TxDOT utility permit through RULIS; we prepare the bore plan and profile for that filing. The TxDOT Abilene District reviews it. TxDOT cover rules include 60 inches at highway crossings for electric and communication lines and 60 inches for water lines; along right of way, the stated minimums are 48 inches for electric and communication and 36 inches for water. Pressurized sewer crossings need 60 inches, and the permit may set another depth. In incorporated Snyder, we plan street boring knowing its streets belong to the city. A BNSF Railway track crossing needs the railroad’s agreement, and a Deep Creek crossing is checked for Corps jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Which utilities already have lines in Snyder near the City of Snyder system?

The City of Snyder owns the public water system, which uses surface water and reports 7,627 service connections serving 11,104 people. That makes nearby water lines a key locate and exposure item before a College Avenue bore. Oncor Electric Delivery Company and Big Country Electric Cooperative report electric service in Scurry County; those reports do not identify the provider at every address, so we confirm the line owner before planning an electric conduit bore.

Line ownerWhat it isSourceSize
City of SnyderPublic water systemSurface water7,627 connections, 11,104 people served
Oncor Electric Delivery Company and Big Country Electric CooperativeElectric utilities reporting service in Scurry CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Snyder’s median housing year at 1967; 36 percent of homes were built before 1960, 55 percent from 1960 to 1999 and 9 percent in 2000 or later. Older blocks along 37th Street may involve existing lines that need careful exposure, while newer services still require locates. Paint shows a marked line’s position, not its depth, so we hydrovac pothole marked utilities on the bore path before drilling near them.

Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building
Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building.

What is near Snyder and how far is Hermleigh?

Snyder is the Scurry County seat, at an elevation of 2,322 feet, and covers 8.94 square miles. ZIP code 79549 serves Snyder, helping us identify the area for underground work. Hermleigh is 10.6 miles southeast, Fluvanna is 17.8 miles northwest and Colorado City is 21.9 miles south; Loraine is 24.1 miles southeast and Westbrook is 25.3 miles south. Snyder is 331 road miles and a 6.7 hour drive from our Yukon, Oklahoma main office, a distance that affects mobilization for work near US 180 or Deep Creek.

Places near Snyder

What would we bore near Snyder’s 37th Street?

  • Highway crossing: A US 180 bore stays beneath the existing roadway, with the utility owner’s TxDOT permit plan covering the crossing.
  • Street service: A water or sewer line along College Avenue can pass beneath pavement, with pits placed in workable ground beyond the bore path.
  • Rail crossing: A proposed route below BNSF Railway needs the railroad’s agreement and a plan for the track crossing conditions.
  • Creek crossing: A Deep Creek bore is planned below the channel, with a jurisdiction check included during planning.
  • Fiber conduit: A route near Western Texas College can use conduit sized to the project and potholes at marked utilities.
  • Water connection: A line near the City of Snyder system needs its owner and existing route confirmed before drilling.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

How do I get a directional boring quote for Snyder near College Avenue?

For a Snyder quote, give us the address or map pin, what will go in the ground, the pipe or conduit size and the footage; a sketch or plans help. A College Avenue plan can show whether the route stays clear of marked utilities and where the pits fit. Call (405) 409-7423 and you can speak with a person 24 hours a day.

The 331 road miles from Yukon make mobilization part of a Snyder job’s scope. Miles soil and the clay loam mapped around Snyder affect drilling and fluid planning; a crossing of US 180 or BNSF Railway adds coordination and design work. We also account for line size, bore length, utilities to expose, pavement or concrete, creek or drainage crossings, pits, excavator time and sand backfill. High profile or emergency work can change what the job requires.

Questions people ask about boring in Snyder

Does Trinity Boring Solutions take directional boring work in Snyder and Scurry County?

Yes. Trinity Boring Solutions takes directional boring work in Snyder and across Texas. Our main office is in Yukon, and Snyder jobs use our crews or satellite yards run by partner contractors we have vetted. You work with Trinity from the first call through the bore log, whether the crew is near Deep Creek or College Avenue.

What does a bore under BNSF Railway in Snyder require?

A Snyder bore beneath BNSF Railway needs an agreement from the railroad that owns the track. The agreement sets crossing conditions such as casing, depth and flagging. Public mapping shows 5.75 BNSF track miles inside the city, so the proposed alignment and railroad requirements need to be addressed before the crossing plan is finalized.

Can a line be bored under Deep Creek in Snyder?

A line can be planned beneath Deep Creek in Snyder, with the bore depth set to stay under the channel. Deep Creek runs 2.02 channel miles in the city, and planning checks whether the crossing falls under U.S. Army Corps of Engineers jurisdiction. Site conditions and the proposed route determine the final bore plan.

Who runs Snyder’s public water system, and where does its water come from?

The City of Snyder owns the public water system, and its source is surface water. Public system records list 7,627 service connections and 11,104 people served. Before a bore near College Avenue or US 84, confirm the water line location and owner so the drilling path avoids existing infrastructure.

Who owns electric lines in Snyder and Scurry County, and who confirms conduit specs?

Oncor Electric Delivery Company and Big Country Electric Cooperative report electric service in Scurry County, but that does not identify the provider at every Snyder address. Confirm the actual line owner for the proposed route and verify conduit specifications with that owner before planning a conduit bore near 37th Street.

Does Snyder control Coliseum Drive, and must a bore cut the street?

Snyder is incorporated, so Coliseum Drive is a city street. A directional bore can pass beneath the pavement without cutting it, with entry and exit pits set outside the bore path where site conditions allow. The route still needs utility locates and exposure before drilling near marked lines.

How far is Snyder from Trinity’s Yukon, Oklahoma main office, and does that affect the job?

Snyder is 331 road miles and a 6.7 hour drive from the Yukon main office. That distance affects mobilization for a job near US 180 or Hermleigh, alongside the bore length, ground, crossings and equipment required. Sharing the route and scope helps us plan the work and crew travel.

How much notice does Texas811 need for a Snyder bore near College Avenue?

For a bore near College Avenue, submit the Texas811 locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. If Snyder boring work starts more than 14 days past the original notice, we submit a new request. Before work continues in Snyder, we refresh worn or moved marks through Texas811.

What affects the cost of directional boring under US 180 in Snyder?

A Snyder bore beneath US 180 is priced by its job scope, not by the road name alone. Length, pipe or conduit size, Miles soil, pavement, the number of utilities to expose and the permit work all matter. BNSF Railway or Deep Creek crossings can add planning, while the 331 road miles from Yukon affect mobilization.

Where the Snyder facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Snyder

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Snyder, Texas

Type the address of your job in Snyder. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Snyder

All counties: Texas county list.