trinityboringsolutions.com

Winters Texas Directional Boring: Quanah Clay Loam, US 83 and Bluff Creek

Quick Answer: Can we get a line under US 83, Main Street or Bluff Creek without cutting it? Trinity Boring Solutions uses directional boring, also called horizontal directional drilling (HDD), for Winters crossings like these. Winters is 335 road miles from our Yukon, Oklahoma main office, with US 83 among the routes a project may involve. Quanah clay loam is common here and can cling to the reamer, so we plan staged reaming and a timely pipe pull. For nearby Ballinger, we also take Texas work.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Winters bores at a glance

  • Incorporated city in Runnels County, Texas. Population 2,281 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 335 miles, about 6.6 hours of driving.
  • Ground: Quanah soil is mapped on 37 percent of the area, with clay loam about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: US 83, Texas State Highway 153, Loop 438, FM 1770 and FM 2405. State permit office: TxDOT San Angelo District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Bluff Creek.
  • Public water: City of Winters, surface water.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who can I call for directional boring under US 83 in Winters?

Trinity Boring Solutions can bore beneath US 83, Main Street or Bluff Creek in Winters without cutting the surface. Can we get a line under one of those routes without opening it? Yes, we plan directional bores for water, sewer, gas, electric conduit and fiber, including lines serving properties along those Winters features. The Census Bureau Vintage 2024 estimate puts the Winters population at 2,281, and the city is in Runnels County.

Our main office is in Yukon, Oklahoma, and Winters work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Since 1982, more than four decades of boring have informed how we plan around Winters’ Quanah clay loam, which can cling to a reamer and grip pipe. We stay involved from the first call through the bore log, whichever crew is on site.

Trinity Boring Solutions Vermeer D24x40 directional drill set up for a bore
Our Vermeer D24x40 directional drill set up for a bore. Photos on this page are from our jobs in Oklahoma and Texas.

What is Quanah soil like to bore in Winters?

Winters ground is commonly mapped as Quanah soil, so a bore may pass through clay loam that holds an open hole but sticks to tooling. The USDA soil survey maps Quanah clay loam across 30 percent of the city area, with Quanah soils covering 37 percent. About 60 percent of the mapped area is clay loam at about 40 inches below the surface, while sandy ground is not mapped at that depth. These are mapped soil patterns, not test borings; conditions can vary along a route.

USDA soil survey, inside the Winters city limitsWhat is mapped
Soil series mappedQuanah 37 percent, Sagerton 10 percent, Mereta 9 percent, Bukreek 9 percent and Potter 5 percent
Texture at the surfaceclay loam 66 percent and loam 12 percent
Texture about 40 inches downclay loam 60 percent, extremely cobbly loam 5 percent and sandy clay loam 5 percent
Engineering class about 40 inches downlean clay (CL) 74 percent and clayey gravel (GC) 5 percent
Average clay content about 40 inches down31 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches0 percent of the area
Flood prone soils4 percent of the area
High corrosion risk for uncoated steel8 percent of the area

The Winters soil survey does not map bedrock in the top five feet, which does not rule out rock deeper down. It maps no seasonal water table within 60 inches, but flood prone soils cover 4 percent of the area, a concern to check near Bluff Creek. When boring in Winters, we consider Quanah soils and the mapped high steel corrosion risk across 8 percent while selecting casing and tracer wire materials. Quaternary deposit, undivided, includes alluvium; the map also shows Early Permian sedimentary rock. The mapped ground calls for checking the route rather than assuming one uniform profile.

How do crews handle Winters clay loam?

Winters clay loam can stay open yet build sticky cuttings on the reamer, so we match fluid and reaming to the route. Along Main Street or near Bluff Creek, we track the head and expose marked utilities before drilling close.

  1. Quanah clay loam can ball onto the reamer, so we use thinner fluid and polymer, then ream in stages along routes such as Main Street.
  2. Because Winters has mapped alluvium as well as clay loam, we watch fluid returns near pavement and keep pressure controlled to avoid lifting the surface.
  3. Before drilling near a marked utility on Dale Street, we use hydrovac potholing to check its depth; paint alone shows its position.
  4. We track the drill head from the surface and log depth and pitch, including on routes planned near Bluff Creek or Old Lake Winters.
Bore pit with a 6 inch PVC sleeve, traffic cones and blue water line flags at NE 24th Street in Oklahoma City
A bore pit with a 6 inch PVC sleeve, traffic cones and blue water line flags at NE 24th Street in Oklahoma City.

Which roads, tracks or creeks can a Winters bore cross near Main Street?

Winters has US 83, Texas State Highway 153, Loop 438, FM 1770 and FM 2405 within its limits, so a route beneath a highway needs a bore plan suited to that right of way. Main Street is the longest named street at 3.25 miles in the city; Dale Street runs 1.6 miles, and Rogers Street runs 1.33 miles. A bore can keep pavement and driveways uncut, with entry and exit pits placed in dirt where access allows. No highways are listed within 1.5 miles outside the limits.

CrossingTypeMapped extentWho has a say
US 83US highway3.5 roadway miles insideState highway office
Texas State Highway 153State highway7.3 roadway miles insideState highway office
Loop 438State highway3.2 roadway miles insideState highway office
FM 1770State highway1.8 roadway miles insideState highway office
FM 2405State highway0.3 roadway miles insideState highway office
Bluff CreekStream0.05 channel miles insideChecked for Corps of Engineers jurisdiction
Antelope CreekStream nearbyAlong the boundaryChecked for Corps of Engineers jurisdiction
Elm CreekStream nearbyAlong the boundaryChecked for Corps of Engineers jurisdiction
Big Coyote CreekStream nearby0.3 miles outsideChecked for Corps of Engineers jurisdiction
Long BranchStream nearby0.7 miles outsideChecked for Corps of Engineers jurisdiction
Lake WintersLake or pond335 acres, nearbyChecked for Corps of Engineers jurisdiction
Old Lake WintersLake or pond61 acres, insideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Winters or within one mile outside the limits, and no street and rail crossings are mapped in the city. Bluff Creek has 0.05 channel miles inside the limits, and five mapped street crossings of named streams make creek routes worth checking. Antelope Creek and Elm Creek touch or run along the boundary. Old Lake Winters is inside the city, while Lake Winters is outside it; a planned lake or creek crossing is checked for federal jurisdiction during planning.

Do I need a permit to bore under a Winters road in Runnels County?

Winters is an incorporated city, so Main Street, Dale Street and Rogers Street are city streets; a crossing there is not automatically a county road job. For work in the right of way of US 83, Texas State Highway 153, Loop 438, FM 1770 or FM 2405, the utility owner applies for the TxDOT utility permit through RULIS. The TxDOT San Angelo District reviews it, and we prepare the bore plan and profile for the owner’s application. For a US 83 crossing in Winters, we follow TxDOT’s requirement to bore or tunnel beneath existing highway pavement. Bluff Creek or another water crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

What is already in the ground near the City of Winters water system?

The City of Winters public water system uses surface water and reports 2,326 service connections serving 2,281 people. That system is one reason to identify the line owner before planning a bore near Main Street or another water route. Electric service reported in Runnels County includes AEP Texas North, Concho Valley Electric Cooperative and Taylor Electric Cooperative. The provider at a particular Winters address must be confirmed with the line owner before planning an electric conduit bore.

Line ownerWhat it isSourceSize
City of WintersPublic water systemSurface water2,326 connections, 2,281 people served
AEP Texas North, Concho Valley Electric Cooperative and Taylor Electric CooperativeElectric utilities reporting service in Runnels CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Winters’ median housing year at 1957; 61 percent of homes were built before 1960, 38 percent from 1960 to 1999 and 1 percent in 2000 or later. A replacement bore near Dale Street may follow older connections, while a new service has a different route and tie in. We hydrovac pothole marked utilities on the bore path before drilling near them, since paint gives position rather than depth.

Coiled black HDPE conduit fitted with a pulling grip staged on a lawn along a completed bore path
Coiled HDPE conduit fitted with a pulling grip, staged on a lawn along a finished bore path.

Where is Winters in relation to Ballinger and our Yukon office?

Winters is in Runnels County, 14.5 miles north of county seat Ballinger, and its elevation is 1,821 feet. The incorporated city covers 2.36 square miles and uses ZIP code 79567. Wingate is 10.8 miles northwest; Lawn is 17.8 miles northeast; Novice is 19.8 miles east; and Bronte is 20.2 miles west. Abilene, the nearest larger city listed, is 37.2 miles north. From our Yukon yard, Winters is 335 road miles away, a 6.6 hour drive, which can affect mobilization for a bore near US 83.

Places near Winters

Which jobs call for a bore near Bluff Creek in Winters?

  • Highway crossing: A route beneath US 83 needs a bore plan for the highway right of way and the pavement above it.
  • Water service: A connection near the City of Winters system can be routed beneath a Main Street driveway without cutting the surface.
  • Fiber conduit: A drop along Rogers Street can pass below pavement, with marked utilities exposed before the drill approaches them.
  • Creek crossing: A proposed route near Bluff Creek needs depth planning beneath the channel and a jurisdiction check during planning.
  • Lake route: A line near Old Lake Winters can be bored beneath a surface that would otherwise need to be opened.
  • Street replacement: A new water or sewer line near Dale Street can avoid cutting across existing pavement.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What should I send for a Winters bore quote near Cryer Street?

For a quote near Cryer Street, send the address or map pin, what will go underground, the pipe or conduit size and the footage. A sketch or plans help us see how the route relates to nearby streets or a water crossing. For a route near US 83, include the proposed crossing location so we can understand the right of way involved.

For a Winters job, the first price question is the ground: Quanah clay loam can cling to a reamer and affect the drilling plan. Length, pipe or conduit size and the number of utilities to cross and expose also shape the work. Pavement on Main Street, a Bluff Creek crossing, pits and excavator time can add scope. We also account for sand backfill, high profile or emergency conditions, and mobilization for a site 335 road miles from Yukon.

Questions people ask about boring in Winters

Does Trinity Boring Solutions take directional boring work in Winters and Runnels County?

Yes. We take directional boring work in Winters and across Texas, with the work handled by our own crews and vetted partner drilling contractors. The main office is in Yukon, Oklahoma, and you work with Trinity from the first call through the bore log, including a job near US 83.

Who runs Winters’ water system in Runnels County, and where does its water come from?

The City of Winters owns and runs the public water system, which uses surface water. Winters’ system reports 2,326 service connections serving 2,281 people, figures we factor into underground utility planning. For a bore near Main Street, identify the specific water line and its owner before setting the route.

Which electric utilities report service in Runnels County, and who confirms conduit specs for Winters?

AEP Texas North, Concho Valley Electric Cooperative and Taylor Electric Cooperative report electric service in Runnels County. Confirm the provider and conduit specifications with the owner of the line at the Winters job address before planning a bore, including one near Rogers Street.

Who controls Winters streets like Rogers Street, and can a bore avoid cutting one?

Rogers Street is a city street because Winters is incorporated. Directional boring can place a line below the street without opening the pavement, subject to the route and any applicable permit. A bore near US 83 involves a state highway right of way instead.

Does older housing near Dale Street affect replacement bores in Winters?

It can affect what needs checking along a replacement route. The American Community Survey 2019 to 2023 estimates put the median housing year at 1957, with 61 percent of homes built before 1960. Near Dale Street, we pothole marked utilities before drilling close to them.

What ground should I expect near Quanah soil in Winters?

The USDA soil survey maps Quanah clay loam across 30 percent of Winters, and clay loam covers about 60 percent of the mapped area at about 40 inches below the surface. It can hold an open hole but stick to the reamer, so we plan fluid and staged reaming for the route.

Can I reach Trinity after hours for an urgent bore near Rogers Street in Winters?

Yes. We answer Trinity’s phone 24 hours a day at (405) 409-7423, and Winters is 335 road miles from our Yukon main office. If an urgent line issue is near Rogers Street, call to discuss the location, what line is involved and the work needed.

How much Texas811 notice do I need before a bore near Main Street in Winters?

Paint near Main Street shows a marked utility’s position, not its depth. Texas law requires a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before. If the start slips more than 14 days past the original notice, make a new request; refresh worn or moved marks through Texas811 before work continues.

What affects the cost of directional boring under US 83 in Winters?

The route and scope determine the price, not a single measure. Quanah clay loam, bore length, pipe or conduit size and utilities that must be crossed and exposed all matter. Pavement or a Bluff Creek crossing adds planning needs, and the 335 road miles from Yukon affect mobilization.

Where the Winters facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Winters

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Winters, Texas

Type the address of your job in Winters. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Winters

Same county: Miles · Rowena. All counties: Texas county list.