Case Study: Emergency Gas Line Bore at the TA Truck Stop on Council Road and I 40 in Oklahoma City

Trinity Boring Solutions took the emergency call for a gas line leak at the TA truck stop at 801 South Council Road and I 40 in west Oklahoma City and bored two new 2 inch SDR 11 yellow poly gas lines, about 280 and 275 feet, with tracer wire and four 2 inch risers, through sandy ground.
Case Study: 6 Inch PVC Sleeve Bored Under NE 24th Street and a Water Main in Oklahoma City

Trinity Boring Solutions bored a 6 inch Schedule 40 PVC sleeve under NE 24th Street and a water main near N Martin Luther King Avenue in northeast Oklahoma City, at the future Clara Luper Civil Rights Center, from two bore pits with a Ditch Witch JT922, a 9 inch pre ream and bentonite drilling fluid for the sandy soil.
Case Study: 385 Foot Sandstone Rock Bore Under Creeks, Wetland and a Dam in Guthrie, OK

Trinity Boring Solutions ran a 385 foot directional bore through hard sandstone at the Cimarron site near Guthrie, OK, under two small creeks, wetland and a dam where trenching was not an option, then pre reamed the hole and pulled back 4 inch HDPE conduit for a high priority electric line.
Case Study: 840 Feet of FAA Conduit Bored Under Runways at Will Rogers World Airport

Trinity Boring Solutions installed roughly 840 feet of 2 inch conduit by horizontal directional drilling under an active taxi runway and two service roads at Will Rogers World Airport, under an FAA Nav Aids 17L/35R permit. No pavement cuts, no runway closure.
Case Study: Propane Line Boring at a Hospital Campus in Anadarko, Oklahoma
A 75-foot propane bore at an Anadarko hospital campus – owner-supplied poly and tracer wire, no surface disruption on an active medical facility, and a clean handoff to the mechanical contractor.
Case Study: Emergency Water Line Boring at a Stillwater Sorority House
A failed water service flooded a sorority house basement near the OSU campus. Here is how a precision directional bore delivered the new 3-inch line through the basement wall at exact grade – without touching the yard.
Case Study: Electrical Conduit Boring at Hobby Lobby Headquarters, Oklahoma City
How four directional bores put four 1-inch electric conduits and a 2-inch PVC electric line under the Hobby Lobby headquarters entrance in Oklahoma City – with zero trenching and zero downtime.
Directional Boring Standards and Regulations: ASTM, OSHA, and Oklahoma Rules Explained
The four layers of rules that govern a directional bore in Oklahoma – the 811 law and tolerance zone, OSHA and PHMSA federal regs, ASTM F1962 and industry standards, and ODOT/railroad crossing specs.
Directional Boring FAQ: Straight Answers on Cost, Permits, Timelines, and Process
Straight answers to the directional boring questions Oklahoma customers ask most – cost per foot, timelines, 811 and permits, yard impact, depths, rock, and how to vet a contractor.
Directional Boring Terms: The Complete HDD Glossary for Utility Projects
A plain-language glossary of 50+ directional boring terms – pilot bore, back reaming, frac-out, drilling mud, sonde, tracer wire, and more – from Oklahoma HDD contractor Trinity Boring Solutions.
Is Directional Drilling Profitable? What It Costs to Start an HDD Company
Is directional drilling profitable? Yes, when run well – established HDD contractors net 10-20% margins. See real startup costs ($150K-$1M+), pay-per-foot rates by product type, and an honest Oklahoma contractor’s take on the business.
How Much Do Directional Drillers Make? HDD Careers, Pay, and Training
Real wage data on what directional drillers earn by role and state, how long it takes to become an HDD operator, required certifications, and why Trinity Boring Solutions is hiring across Oklahoma.
What Is the Longest Directional Bore Ever Completed?
The world record for the longest directional bore is a 4,058-meter (13,320-foot) HDD crossing of the Brahmaputra River in India, completed in 2026. See the record history, what limits bore length, and what’s realistic for Oklahoma projects.
Is Directional Boring Hard? What It Really Takes to Run an HDD Rig
Is directional boring hard? Yes – it’s a high-skill trade. See what an HDD crew does, how long it takes to run a rig well, what makes bores fail, and why DIY boring is risky in Oklahoma soil.
How Much Does It Cost to Trench 100 Feet in Oklahoma?
A basic 100-foot utility trench runs $400-$1,200, but real Oklahoma jobs with depth, restoration, and utility type often land between $800 and $4,000. See the cost breakdown by utility, depth rules, restoration costs people forget, and when boring beats trenching.
Do I Need a Permit to Dig Up or Replace My Sewer Line in Oklahoma?
Do I need a permit to dig up my sewer line? Yes, in most Oklahoma cities a plumbing permit is required for sewer repair or replacement, plus a right-of-way permit if the dig reaches the city main. Here is how OKC, Tulsa, Edmond, and Norman handle permits, Okie 811 locates, inspections, and trenchless sewer work.
How Deep Should a Sewer Line Be Buried in Oklahoma?
How deep should a sewer line be buried? Oklahoma code sets a 12-inch minimum, but most residential sewer lines run 18-36+ inches deep, and deeper still under driveways, roads, or near the city main, once frost depth, IPC slope requirements, and tap depth are factored in.
How Much Does It Cost to Bore Under a Driveway in Oklahoma?
Real Oklahoma pricing for boring under a driveway: per-foot rates, flat-job ranges, minimum charges, cost factors, and a side-by-side comparison against cutting and replacing concrete.
Does Directional Boring Use Water? Drilling Fluid and Mud Explained
Yes, directional boring uses water mixed with bentonite clay to create drilling fluid, or mud. Learn what the fluid does, how many gallons per foot a typical bore uses, mixing and additives, recycling and disposal, frac-out risk, dry boring alternatives, and how Oklahoma clay and sand change the equation.
Locating Underground Utilities Before Boring: The Complete Oklahoma Process
Home › Field Notes › Locating Underground Utilities Before Boring Field Notes Locating Underground Utilities Before Boring: The Complete Oklahoma Process By Darren Rice, Owner of Trinity Boring Solutions · Yukon, Oklahoma · 5.0★ from 53 reviews Before any boring rig starts drilling in Oklahoma, every buried utility in the work area must be located. […]