trinityboringsolutions.com

Aspermont Texas Directional Boring: Tillman Clay Loam, US 380, Turtle Creek

Quick Answer: US 380 is a major route a utility line may need to pass beneath, and we do directional boring, also called horizontal directional drilling (HDD), in Aspermont, Texas. Broadway Street is another surface to cross without opening pavement. Aspermont is 271 road miles from our Yukon, Oklahoma main office, and US 83 also runs through town. Tillman clay loam covers 61 percent of mapped area; heavy clay below can grip pipe, so we manage fluid and reaming carefully.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Aspermont bores at a glance

  • County seat of Stonewall County, Texas. Population 784 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 271 miles, about 5.5 hours of driving.
  • Ground: Tillman soil is mapped on 94 percent of the area, with clay about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 6 percent of the area.
  • Highways inside the boundary: US 380, US 83, FM 1263, FM 3457 and FM 2211. State permit office: TxDOT Abilene District.
  • Railroad track inside the boundary: none mapped.
  • Public water: City of Aspermont, surface water bought from another system.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Which contractor handles directional boring beneath US 380 in Aspermont?

Trinity Boring Solutions takes directional boring work in Aspermont, where US 380 is a major route a utility line may need to pass beneath. Aspermont is in Stonewall County, and the Census Bureau Vintage 2024 estimate puts its population at 784. We install water, sewer, gas, electric conduit and fiber beneath routes such as Swenson Avenue or 1st Street, with the bore path checked against existing lines.

Our main office is in Yukon, Oklahoma, and Aspermont work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our family business began in 1965, and we have done directional boring since 1982; in Aspermont, we plan around US 380 crossings. The 3/4 inch service line to 48 inch casing range suits the mix of US 380 crossings and runs along FM 1263.

Aerial view of a bore pit with drill rig and conduit alongside a directional drill rig and conduit on a concrete lot
Our crew at a bore pit beside the directional drill on a conduit job, seen from above. Photos on this page are from our jobs in Oklahoma and Texas.

What ground does a bore encounter in Aspermont’s Tillman soil?

The USDA soil survey maps Tillman soil across 94 percent of Aspermont, with Tillman clay loam on 61 percent of the mapped area and the 1 to 3 percent slopes unit on 33 percent. Surface texture is clay loam on 95 percent and clay on 4 percent. At about 40 inches below the surface, the survey maps clay across the area, with an average clay content of 42 percent. Our mapped Tillman soil patterns in Aspermont are planning references, not test borings for a proposed route. The heavy clay can cling to a reamer and grip pipe, so the hole needs controlled fluid and staged reaming.

USDA soil survey, inside the Aspermont city limitsWhat is mapped
Soil series mappedTillman 94 percent and Knoco 4 percent
Texture at the surfaceclay loam 95 percent and clay 4 percent
Texture about 40 inches downclay 100 percent
Engineering class about 40 inches downfat clay (CH) 96 percent and elastic silt (MH) 4 percent
Average clay content about 40 inches down42 percent
Bedrock mapped within 60 inches6 percent of the area (0 percent hard rock, 6 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel100 percent of the area

The USDA soil survey maps bedrock within 60 inches on 6 percent of Aspermont, and that mapped bedrock is weathered; hard bedrock is not mapped at that depth. The typical mapped depth is 21 inches, so the route still needs checking rather than assuming uniform soil. Near Turtle Creek in Aspermont, we do not have mapped seasonal water table or flood prone soil information, so confirm conditions onsite. High steel corrosion risk is mapped across the area, a concern for uncoated casing and tracer wire that the line owner should address. The Blaine Formation, mapped as Roadian, includes mudstone, gypsum, dolomite and sandstone, which may affect a bore if the route reaches that material.

How do crews bore through Aspermont’s clay?

Tillman clay loam and clay at about 40 inches call for measured drilling rather than a fast pull. Along Broadway Street, we plan fluid and reaming to keep the hole stable without pushing fluid toward pavement.

  1. Tillman clay can ball on a reamer, so we use thinner drilling fluid with polymer and open the hole in stages before pulling pipe.
  2. Because the survey maps heavy clay at about 40 inches, we watch fluid returns closely near Broadway Street so pressure does not lift pavement.
  3. We hydrovac pothole each marked utility on the route before the drill gets close; on a planned 1st Street bore, paint alone cannot show line depth.
  4. A walkover locator tracks the drill head as it advances beneath US 380, while the crew records depth and pitch at each rod.
Open bore pit in red Oklahoma dirt with white PVC conduit stub ups and an orange safety barrier
An open bore pit in red Oklahoma dirt with PVC conduit stubbed up and a safety barrier around it.

Where might a line go under Broadway Street in Aspermont?

Aspermont has US 380, US 83, FM 1263, FM 3457, FM 2211 and FM 610 inside its limits, so a route may need to pass below a highway or farm to market road. Broadway Street is the longest named street at 1.98 miles in town. Swenson Avenue runs 1.48 miles, Vivian Avenue 1.37 miles and 1st Street 1.19 miles. A bore beneath these paved routes can leave the surface uncut, with entry and exit pits placed off the traveled way.

CrossingTypeMapped extentWho has a say
US 380US highway2.4 roadway miles insideState highway office
US 83US highway1.9 roadway miles insideState highway office
FM 1263State highway1.6 roadway miles insideState highway office
FM 3457State highway1.1 roadway miles insideState highway office
FM 2211State highway1.1 roadway miles insideState highway office
FM 610State highway0.5 roadway miles insideState highway office
Turtle CreekStream nearby0.5 miles outsideChecked for Corps of Engineers jurisdiction
Rock CreekStream nearby0.6 miles outsideChecked for Corps of Engineers jurisdiction
Tonk CreekStream nearby0.8 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Aspermont or within one mile outside its limits, so a mapped rail crossing is not part of the local route picture. No named stream crosses the town limits either. Turtle Creek is 0.5 miles from the limits, Rock Creek is 0.6 miles away and Tonk Creek is 0.8 miles away; the mapped street crossings of named streams in town are none. We see no lakes or ponds mapped within one mile of Broadway Street in Aspermont when planning a bore. A planned creek route still needs a site specific crossing review.

Whose permission does a bore under US 380 in Aspermont need?

For a bore under US 380 or FM 1263 in Aspermont, the line owner applies for the TxDOT utility permit, and the TxDOT Abilene District reviews it. The owner files through RULIS; we prepare the bore plan and profile for that application and work under the permit issued to the owner. TxDOT rules call for boring or tunneling beneath existing highway pavement, with a rural highway bore extending under all travel lanes. At crossings, electric and communication lines need 60 inches of cover, water needs 60 inches and pressurized sewer needs 60 inches; the permit may set another depth. Aspermont streets such as Broadway Street are city streets. Turtle Creek is outside town, and a creek crossing is checked for Corps jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

What is already in the ground in Aspermont and Stonewall County?

The City of Aspermont public water system uses purchased surface water and lists 731 service connections serving 858 people. A planned water bore near the city system needs its actual route checked against existing lines. AEP Texas North, Big Country Electric Cooperative, South Plains Electric Cooperative and Tri-County Electric Cooperative report electric service in Stonewall County. Those reports do not identify the provider at every address, so we confirm the line owner before planning an electric conduit bore along a street such as 1st Street.

Line ownerWhat it isSourceSize
City of AspermontPublic water systemSurface water bought from another system731 connections, 858 people served
AEP Texas North, Big Country Electric Cooperative, South Plains Electric Cooperative and Tri-County Electric CooperativeElectric utilities reporting service in Stonewall CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Aspermont’s median housing year at 1967; 38 percent of homes were built before 1960, 53 percent from 1960 to 1999 and 9 percent in 2000 or later. That mix can mean either replacement work near older streets or a new service run. For any planned line beneath Broadway Street, we hydrovac pothole each marked utility on the bore path before drilling nearby; paint shows position, not depth.

Hydrovac truck and boring equipment staged beside an airport taxiway for utility daylighting in Oklahoma City
Our hydrovac truck and boring equipment beside an airport taxiway in Oklahoma City, set up to expose a utility crossing.

How far is Aspermont from Hamlin and our Yukon office?

Aspermont is the Stonewall County seat in the TxDOT Abilene District, at an elevation of 1,773 feet. The incorporated town covers 2.05 square miles and uses ZIP code 79502. Hamlin is 18.1 miles south; Rule is 19.4 miles east; Jayton is 21.6 miles west; Rotan is 24.2 miles southwest; and Rochester is 24.4 miles northeast. Aspermont is 271 road miles and a 5.5 hour drive from our Yukon, Oklahoma main office, so distance is part of planning a job along US 380 or a local street.

Places near Aspermont

What kinds of bores come up near Turtle Creek in Aspermont?

  • Highway crossing: A route beneath US 380 or US 83 can carry water, sewer or conduit without cutting through the traveled lanes.
  • Street service: A water or sewer line beneath Broadway Street can connect a property while keeping the paved route intact.
  • Fiber route: A conduit bore along Swenson Avenue can link service without trenching its street surface.
  • Creek crossing: A route near Turtle Creek needs a site review for depth and possible Corps jurisdiction before the bore is set.
  • Water connection: A line near the City of Aspermont water system needs its path checked against existing service lines.
  • Farm road crossing: A bore under FM 1263 can carry electric conduit or fiber while avoiding an open cut across the roadway.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What do you need to quote a bore near 1st Street in Aspermont?

For a quote near 1st Street, send the map pin first; an exact spot matters because the route could be on a city street, near US 83 or closer to Turtle Creek outside town. For planning a bore near FM 1263 in Aspermont, we need to know what goes underground, the pipe or conduit size, and the footage. A sketch or plans help us check the path and access.

The job scope sets the price, not one measurement by itself. Tillman clay at depth can mean more careful fluid and reaming work; a crossing under US 380 or concrete adds route and surface constraints. We also account for bore length, pipe size, utilities to expose, pits, excavator time and sand backfill. Turtle Creek or another drainage crossing changes planning, while Aspermont’s 271 road miles from Yukon affect mobilization. High profile or emergency work can add to the demands.

Questions people ask about boring in Aspermont

Does Trinity Boring Solutions take work in Stonewall County, and who staffs an Aspermont job?

Yes, we take directional boring work in Aspermont and across Texas. Our crews or a partner drilling contractor Trinity has personally vetted can handle the field work, while you work with Trinity through the job. The same contact stays involved from the first call through the bore log, including for a route near US 380.

Does Tillman soil in Aspermont create a corrosion concern for steel, and what pipe is used?

The USDA soil survey maps high steel corrosion risk across Aspermont, including areas with Tillman soil. The line owner chooses whether steel casing or tracer wire needs coating for the project. HDPE is an option for a line where that mapped soil risk matters, and the material choice should match the line requirements.

What ground is a bore likely to pass through in Aspermont’s Tillman soil?

The USDA soil survey maps Tillman clay loam across most of Aspermont, and clay at about 40 inches below the surface. The mapped clay content at that depth averages 42 percent. Heavy clay can stick to the reamer and grip the pipe, so crews manage fluid and ream in stages rather than treating it like sandy ground.

Is there rock near the surface on an Aspermont bore route?

The USDA soil survey maps bedrock within five feet on 6 percent of Aspermont, and the mapped bedrock is weathered. For Knoco soils in Aspermont, hard bedrock is not mapped within that depth; we verify conditions along the bore. The Blaine Formation includes mudstone, gypsum, dolomite and sandstone, so a route still needs to be checked for the ground it actually encounters.

Who approves a bore under US 380 in Aspermont, and which TxDOT office reviews it?

The line owner applies for the utility permit for a bore under US 380, and the TxDOT Abilene District reviews the application. The owner submits through RULIS; we provide the bore plan and profile for that filing. TxDOT rules call for boring or tunneling beneath existing highway pavement, with the permit setting the approved route and depth.

Can a line be bored beneath Turtle Creek near Aspermont?

A bore beneath Turtle Creek can be considered, but the crossing needs a route and depth review first. Turtle Creek is 0.5 miles from Aspermont’s limits, rather than inside town. During planning, the creek crossing is checked for U.S. Army Corps of Engineers jurisdiction.

How early should I call 811 for a bore near Broadway Street in Aspermont?

Call Texas811 at least 48 hours before excavation begins, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. If a Broadway Street start slips more than 14 days past the original notice, make a new request. Have worn or moved marks refreshed through Texas811 before work resumes.

How does Aspermont’s distance from the Yukon, Oklahoma main office affect a bore?

Aspermont is 271 road miles and a 5.5 hour drive from our Yukon main office. That distance can affect mobilization planning for a bore beneath US 83 or a service run on 1st Street. The route, scope and access help us plan the crew and equipment needed.

What affects the price of directional boring under US 380 in Aspermont?

The price depends on the specific job, including length, pipe size, Tillman clay, utilities to expose and pavement at a US 380 crossing. Pits, excavator time, sand backfill and drainage crossings also affect the work. Aspermont’s 271 road miles from Yukon add a mobilization factor, and high profile or emergency work can change the scope.

Where the Aspermont facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Aspermont

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Aspermont, Texas

Type the address of your job in Aspermont. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Aspermont

All counties: Texas county list.