Bishop Hills Texas Directional Boring: Paloduro Clay Loam, RM 1061 and West Amarillo Creek
Quick Answer: At a Bishop Hills address near RM 1061, confirm the water provider by address and the electric line owner before planning a conduit bore. Trinity handles directional boring, also called horizontal directional drilling (HDD), on routes such as Stonebridge Gate without cutting the street. Yukon is 266 road miles away, so a Kendall Road job affects mobilization. Paloduro clay loam is mapped across 29 percent of town, and sticky cuttings call for staged reaming.
Bishop Hills bores at a glance
- Incorporated city in Potter County, Texas. Population 198 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 266 miles, about 5 hours of driving.
- Ground: Paloduro soil is mapped on 29 percent of the area, with clay loam about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 27 percent of the area.
- Highways inside the boundary: RM 1061. State permit office: TxDOT Amarillo District.
- Railroad track inside the boundary: none mapped.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who can handle directional boring near West Amarillo Creek in Bishop Hills?
Trinity Boring Solutions takes directional boring work in Bishop Hills, Potter County, where the Census Bureau Vintage 2024 estimate puts the population at 198. We install water, sewer, gas, electric conduit and fiber along routes such as Stonebridge Gate and Kendall Road, after identifying the line owner and checking for existing utilities at that address.
Our main office is in Yukon, Oklahoma, and Bishop Hills work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore is roughly 4,100 feet of 48 inch pipe under the Arkansas River in Tulsa. Against that reach, a Stonebridge Gate service route is a local scale job, shaped by the line, ground and crossings. We began our family business in 1965 and have done directional boring since 1982; RM 1061 guides our crossing plans in Bishop Hills.

What does the soil survey show for Bishop Hills and Paloduro soil?
The USDA soil survey maps Paloduro soil across 29 percent of Bishop Hills, including Paloduro clay loam on 3 to 5 percent slopes. Clay loam is the mapped surface texture across 43 percent of town and is also mapped at about 40 inches below the surface across 43 percent. The survey reports average clay content of 25 percent at that depth, while extremely gravelly loam is mapped across 25 percent. For Bishop Hills, Paloduro, Burson, Pits (miscellaneous area), and Bippus are mapped patterns, not test borings, so we verify field conditions. On a Paloduro route, clay can cling to the reamer, so the bore plan needs to account for sticky cuttings and pipe pull timing.
| USDA soil survey, inside the Bishop Hills city limits | What is mapped |
|---|---|
| Soil series mapped | Paloduro 29 percent, Burson 27 percent, Pits (miscellaneous area) 25 percent, Bippus 7 percent and Posey 7 percent |
| Texture at the surface | clay loam 43 percent, loam 27 percent and extremely gravelly loam 25 percent |
| Texture about 40 inches down | clay loam 43 percent, bedrock 27 percent and extremely gravelly loam 25 percent |
| Engineering class about 40 inches down | lean clay (CL) 43 percent, clayey gravel (GC) 25 percent and silty clayey gravel (GC GM) 4 percent |
| Average clay content about 40 inches down | 25 percent |
| Bedrock mapped within 60 inches | 27 percent of the area (0 percent hard rock, 27 percent weathered rock) |
| Seasonal water table within 60 inches | 0 percent of the area |
| Flood prone soils | 8 percent of the area |
| High corrosion risk for uncoated steel | 0 percent of the area |
The USDA soil survey maps bedrock within five feet across 27 percent of Bishop Hills, with weathered bedrock represented there; hard bedrock is not mapped in that depth range. The mapped seasonal water table does not reach five feet, while flood prone soils account for 8 percent of town. With Bishop Hills surface soil identified as clay loam, we do not treat high steel corrosion risk as mapped. The geology map includes Calcrete Clast Loam To Sandy Loam Colluvium of Quaternary age and the Trujillo Formation of Late Triassic age. Calcrete fragments and gravel can affect steering, while a soil to weathered rock change calls for close checks of depth and pitch.
How do we bore Bishop Hills ground with clay loam?
We adapt the bore to Bishop Hills soil, rather than treating Paloduro clay loam and gravelly ground alike. Stonebridge Gate and Kendall Road routes need utility checks before we set the entry and exit pits.
- On Paloduro clay loam, we manage sticky cuttings with a thinner drilling fluid and staged reaming, then plan the pipe pull for the same day the hole is opened.
- Where the Bishop Hills survey maps extremely gravelly loam, we keep pipe ready before the final ream and check depth and pitch along the route.
- At mapped weathered bedrock or a calcrete rich soil change, we allow for slower drilling and check the drill head as ground conditions shift.
- Before a bore near Kendall Road, we hydrovac pothole each marked utility on the route; a walkover locator tracks the head and logs depth and pitch.

Which roads, tracks or creeks could a Bishop Hills bore cross near Stonebridge Gate?
RM 1061 is the state highway mapped inside Bishop Hills, with 0.9 roadway miles in town, and Loop 335 runs 1.1 miles outside the limits. A bore beneath RM 1061 needs a route and depth plan that fits TxDOT requirements. The longest named streets include Stonebridge Gate at 0.73 miles, Kendall Road at 0.46 miles and Cliffside Road at 0.44 miles. Tascosa Road also runs 0.44 miles in town. A street bore can leave pavement and driveways uncut, with pits placed on each side of the crossing.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| RM 1061 | State highway | 0.9 roadway miles inside | State highway office |
| Loop 335 | Highway nearby | 1.1 miles outside | State highway office |
| West Amarillo Creek | Stream nearby | 0.4 miles outside | Checked for Corps of Engineers jurisdiction |
No railroad is mapped inside Bishop Hills or within one mile outside it, and no street and rail crossing is mapped in town. West Amarillo Creek is 0.4 miles outside the limits; no named stream runs inside town, and no street crossing of a named stream is mapped there. We treat West Amarillo Creek as a separate water feature; no lakes or ponds are mapped within one mile of Bishop Hills. If a proposed route reaches West Amarillo Creek, we check for U.S. Army Corps of Engineers jurisdiction during planning. That location changes the crossing review even though the creek is outside town.
Who approves a Bishop Hills bore in Potter County?
Bishop Hills is incorporated, so its city streets belong to the city; RM 1061 is the route that brings TxDOT review into a local bore plan. Electric and communication lines crossing RM 1061 need at least 60 inches of cover below the lowest point of the crossed grade, or 48 inches along the right of way. Water lines need 60 inches at crossings and 36 inches along the right of way. Pressurized sewer crossings need 60 inches. The utility owner, not the drilling contractor, applies through TxDOT’s RULIS system, and the TxDOT Amarillo District reviews it. For the utility owner’s filing in Potter County, we prepare the bore plan and profile and direct permit questions to TxDOT Amarillo District. Beneath existing RM 1061 pavement, the installation is bored or tunneled, and the line is encased. A route near West Amarillo Creek is checked for Corps jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Whose lines are already in the ground in Potter County near Bishop Hills?
The water provider for a specific Bishop Hills address must be confirmed with the city, Potter County or the local water district before a bore is planned. The available public water records do not identify a provider for this town. Southwestern Public Service and Rita Blanca Electric Cooperative report electric service in Potter County, but the line owner for the address must be confirmed before we plan an electric conduit bore along Stonebridge Gate or another street.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| Southwestern Public Service and Rita Blanca Electric Cooperative | Electric utilities reporting service in Potter County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put the median housing year in Bishop Hills at 1968. The estimates say 12 percent of homes were built before 1960, 85 percent from 1960 to 1999 and 3 percent in 2000 or later. That age mix makes it sensible to check the route before a replacement line is drilled; it does not establish the age of any buried pipe. Before drilling near a marked utility on Kendall Road, we expose it with hydrovac potholing because locate paint shows position, not depth.

What is near Bishop Hills and Amarillo?
Bishop Hills is an incorporated town in Potter County, at an elevation of 3,497 feet, with 0.31 square miles of land and ZIP code 79124. Bushland is 7.3 miles southwest, while Amarillo is 8.0 miles southeast and serves as the county seat and nearest larger city. Wildorado is 15.0 miles west. The town is 266 road miles and a 5.0 hour drive from our Yukon, Oklahoma yard. That distance is part of planning a Stonebridge Gate or RM 1061 mobilization.
Places near Bishop Hills
- Directional boring in Bushland: 7.3 miles southwest
- Directional boring in Amarillo: 8 miles southeast
- Directional boring in Wildorado: 15 miles west
- Directional boring in Rockwell Place: 15.7 miles south
- Directional boring in Timbercreek Canyon: 16.2 miles southeast
Which jobs call for a bore near Kendall Road in Bishop Hills?
- Highway crossing: A bore beneath RM 1061 follows a planned profile, with cover and pavement requirements set through TxDOT review.
- Water service: A line along Stonebridge Gate needs its address specific water provider confirmed before the route and tie in are planned.
- Fiber conduit: A Kendall Road route can carry fiber without opening the street, after marked utilities on the bore path are exposed.
- Creek crossing: A proposed line toward West Amarillo Creek needs a crossing review for Corps jurisdiction during planning.
- Replacement bore: A route near Tascosa Road starts with locating and exposing marked lines so an older service can be avoided.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What drives the price of directional boring in Bishop Hills near RM 1061?
For a Bishop Hills quote, send the address or map pin first; a pin near RM 1061 or West Amarillo Creek shows which crossing conditions need review. Include what is going underground, the pipe or conduit size and the footage. A sketch or plans help us lay out the route, pits and any utilities to expose before drilling.
The 266 road miles from Yukon put mobilization first in a Bishop Hills job estimate. Paloduro clay loam, gravelly ground or a weathered bedrock contact can change drilling time and reaming. A crossing at RM 1061, a creek route near West Amarillo Creek, or marked lines along Stonebridge Gate can add review and exposure work. We also consider pipe size and length, pavement or concrete, pit and excavator needs, sand backfill, and whether the work is high profile or an emergency.
Questions people ask about boring in Bishop Hills
Does Trinity take directional boring work in Bishop Hills and Potter County?
Yes. Trinity takes directional boring work in Bishop Hills, Potter County, and plans staffing through its own crews or satellite yards run by vetted partner drilling contractors. Our main office is in Yukon, Oklahoma, and you work with Trinity from the first call through the bore log, including a route near Stonebridge Gate.
How do older homes and buried lines near Kendall Road affect Bishop Hills replacement bores?
The American Community Survey 2019 to 2023 estimates put Bishop Hills median housing age at 1968, with 85 percent of homes built from 1960 to 1999. That does not date buried lines along Kendall Road. We locate and pothole marked utilities before drilling near them, so the replacement route is based on exposed conditions rather than assumptions about age.
What ground should I expect in Bishop Hills near Paloduro soil?
The USDA soil survey maps Paloduro soil across 29 percent of Bishop Hills and clay loam at about 40 inches across 43 percent. The mapped average clay content at that depth is 25 percent. Clay can stick to the reamer, while gravelly areas can affect the drill head, so the bore plan may need staged reaming and frequent steering checks.
Is there rock in Bishop Hills, and how much bedrock is mapped within five feet?
The USDA soil survey maps bedrock within five feet across 27 percent of Bishop Hills, represented as weathered bedrock. Hard bedrock is not mapped in that depth range, but the survey does not rule out rock at greater depth. A soil to rock transition can push the drill head off line, so we monitor depth and pitch.
Who approves a bore under RM 1061 in Bishop Hills?
The utility owner applies for the RM 1061 right of way permit through TxDOT’s RULIS system, and the TxDOT Amarillo District reviews it. We prepare the bore plan and profile for the owner. The required cover depends on the line type and whether it crosses the highway or runs along its right of way.
Can a line be bored beneath West Amarillo Creek near Bishop Hills?
A crossing can be evaluated, but West Amarillo Creek is 0.4 miles outside Bishop Hills and no named stream crossing is mapped inside town. During planning, the proposed creek route is checked for U.S. Army Corps of Engineers jurisdiction. The route and ground conditions determine the bore design and whether the crossing can proceed as planned.
What bore sizes and lengths can Trinity handle for a job near Tascosa Road in Bishop Hills?
For a Bishop Hills job near Tascosa Road, Trinity handles lines from 3/4 inch service lines up to 48 inch casing and bore lengths from 10 feet to 5,000 feet. The route, ground and crossings affect equipment and setup. A map pin and plans show how those capacities fit the specific job.
How much notice does Texas811 need for a bore near Stonebridge Gate in Bishop Hills?
For a Stonebridge Gate bore, place the Texas811 locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. If work near Loop 335 slips more than 14 days past the original notice, we submit a new request. On Stonebridge Gate, we have worn or moved marks refreshed through Texas811 before work continues.
What affects the cost of a directional bore near RM 1061 in Bishop Hills?
The 266 road miles from Yukon, the length and size of the bore, and Bishop Hills ground such as Paloduro clay loam all affect the estimate. A route crossing RM 1061, pavement, utilities or West Amarillo Creek can add planning or exposure work. Pit access, excavator time, backfill and emergency timing also matter.
Where the Bishop Hills facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Bishop Hills
- U.S. Census Bureau, TIGER/Line 2024: Bishop Hills boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Bishop Hills
- U.S. Census Bureau, American Community Survey 2019 to 2023: Bishop Hills housing units and year built
- Macrostrat geologic map compilation: map units under Bishop Hills
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Potter County
- U.S. Geological Survey, Elevation Point Query Service: Bishop Hills elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Bishop Hills
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Bishop Hills
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Bishop Hills, Texas
Type the address of your job in Bishop Hills. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Bishop Hills
All counties: Texas county list.
