trinityboringsolutions.com

Rockwell Place Texas Directional Boring: Pullman Clay Loam, BNSF Railway, Spring Draw

Quick Answer: Rockwell Place is an unincorporated community in Randall County, so its streets are not owned by a city government. We take directional boring, also called horizontal directional drilling (HDD), work in Texas for crossings near Interstate 27. The Yukon, Oklahoma main office is 269 road miles from Rockwell Place, with BNSF Railway track inside the community. Pullman clay loam covers most of the mapped area, so sticky soil can build on a reamer and needs staged passes. We plan each route around marked utilities and the specific crossing.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Rockwell Place bores at a glance

  • Unincorporated community in Randall County, Texas. Population 1,811 (2020 Census count).
  • Road distance from our Yukon, Oklahoma main office: 269 miles, about 5.1 hours of driving.
  • Ground: Pullman soil is mapped on 94 percent of the area, with clay loam about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • No state or US highway is mapped inside the boundary. Closest: Interstate 27, US 60 and US 87.
  • Railroad track inside the boundary: BNSF Railway.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who does directional boring near Rockwell Road in Rockwell Place?

Rockwell Place is an unincorporated community in Randall County, so Rockwell Road is not governed by a city government. The Census Bureau counted 1,811 residents in 2020, the latest count supplied for this unincorporated place. For a route along Rockwell Road or Greg Street, we install water, sewer, gas, electric conduit and fiber lines by directional boring, with the path planned around marked utilities and the specific frontage.

Our main office is in Yukon, Oklahoma, and Rockwell Place work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our range runs from 3/4 inch service lines near Greg Street to 48 inch casing for larger routes near Interstate 27. We are a family business that started in 1965 and has done directional boring since 1982, with that range suited to both short services and long utility runs.

Trinity Boring Solutions Vermeer D24x40 directional drill set up for a bore
Our Vermeer D24x40 directional drill set up for a bore. Photos on this page are from our jobs in Oklahoma and Texas.

What does the Pullman soil survey show beneath Rockwell Place?

The USDA soil survey maps Pullman soils across 94 percent of Rockwell Place, with clay loam mapped across 96 percent of the community. Pullman clay loam with 0 to 1 percent slopes covers 78 percent of the mapped area, and the 1 to 3 percent slope unit covers 17 percent. At about 40 inches below the surface, the mapped texture is clay loam across 99 percent of the area, with average clay content of 39 percent. These are mapped soil patterns, not test borings; the heavy clay can cling to the reamer and grip pipe.

USDA soil survey, inside the Rockwell Place mapped community boundaryWhat is mapped
Soil series mappedPullman 94 percent and Plemons 3 percent
Texture at the surfaceclay loam 96 percent and loam 3 percent
Texture about 40 inches downclay loam 99 percent
Engineering class about 40 inches downlean clay (CL) 99 percent
Average clay content about 40 inches down39 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches1 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel97 percent of the area

In Rockwell Place, we plan around bedrock not mapped in the top five feet while checking whether deeper rock could affect the bore. The geologic map shows the Blackwater Draw Formation, a Cenozoic unit of sand, silt and locally clayey material, as well as Paleocene Cenozoic sedimentary rocks. Seasonal water tables are mapped in 1 percent of the area, while flood prone soils are not mapped. High steel corrosion risk is mapped across 97 percent, so the line owner should consider casing and tracer wire materials; HDPE is not subject to that soil corrosion concern.

How do we bore Rockwell Place clay loam?

Pullman clay loam is the main mapped ground in Rockwell Place, so we plan for sticky cuttings and a hole that can grip pipe. The drill path and fluid returns need close attention near paved routes.

  1. In Pullman clay loam, we use a thinner drilling fluid and polymer, then ream in stages so sticky cuttings do not load the tool.
  2. Where heavy clay is mapped near Rockwell Road, we watch fluid returns and keep pressure controlled to reduce the chance of lifting pavement.
  3. Before drilling toward a marked line on Greg Street, we pothole it with hydrovac because locate paint shows position, not depth.
  4. As the bore advances near Interstate 27, we track the head from the surface and log its depth and pitch.
Drilling fluid returns at the entry as the Vermeer D24x40 S3 drills a 385 foot sandstone rock bore in Guthrie, Oklahoma
Drilling fluid coming back to the entry pit as our Vermeer D24x40 drills a 385 foot bore in Guthrie, Oklahoma.

Which roads, tracks or creeks affect a Rockwell Place bore near Spring Draw?

Interstate 27, US 60 and US 87 run along or touch the mapped community boundary of Rockwell Place, but none runs inside it. A route under one of those highways needs a different plan from work on a local street. Rockwell Road is the longest named street at 1.51 miles inside the community; Greg Street covers 1.14 miles and Abbe Lane 1.03 miles. Those streets can shape a bore route, access for equipment and the number of marked lines to expose.

CrossingTypeMapped extentWho has a say
Interstate 27Highway nearbyRuns along or touches the city limitsState highway office
US 60Highway nearbyRuns along or touches the city limitsState highway office
US 87Highway nearbyRuns along or touches the city limitsState highway office
BNSF RailwayRailroad0.7 track miles insideThe railroad
Spring DrawStream nearby0.7 miles outsideChecked for Corps of Engineers jurisdiction
Palo Duro Club LakeLake or pond57 acres, nearbyChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

BNSF Railway owns 0.7 track miles inside Rockwell Place, on the Hereford Subdivision. No mapped street and rail crossing is recorded inside the community, but a proposed bore under the track still needs railroad coordination. Spring Draw lies 0.7 miles beyond the mapped boundary, and 0.68 miles of unnamed drainage is mapped inside Rockwell Place. No street crossings of named streams are mapped inside the community. Palo Duro Club Lake, a 57 acre lake, is within one mile but outside the boundary.

Do I need a permit to bore in Rockwell Place, Randall County?

Rockwell Place has no city government, so a local street permit is a county matter, while a highway right of way permit is handled by the state. For work on Interstate 27, US 60 or US 87, the line owner, not the driller, files through TxDOT’s RULIS system for review by the TxDOT Amarillo District. We prepare the bore plan and profile for the owner’s filing and work under the permit issued to that owner. TxDOT rules set cover depths by line type, including 60 inches at highway crossings for electric, communication and water lines. A bore under BNSF Railway track needs an agreement with the railroad. Spring Draw is checked for Army Corps jurisdiction during planning if the route crosses it.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Who owns the lines serving Rockwell Place in Randall County?

The provider for a specific Rockwell Place address must be confirmed with the county or local water district before planning a bore; EPA drinking water records do not identify a system serving this place by name. Southwestern Public Service and Greenbelt Electric Cooperative report electric service in Randall County, but the line owner at the bore route must be verified before an electric conduit is planned. Hydrovac potholing near Rockwell Road lets us confirm the depth of marked water and electric lines before the drill approaches them.

Line ownerWhat it isSourceSize
Southwestern Public Service and Greenbelt Electric CooperativeElectric utilities reporting service in Randall CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 estimates put Rockwell Place’s median housing year at 1992. It estimates 3 percent of homes were built before 1960, 70 percent from 1960 to 1999, and 27 percent in 2000 or later. A bore on Greg Street could serve a new connection or replace an older line, so the route matters more than the age estimate alone. We expose marked utilities by hydrovac before drilling near them because surface marks do not show their depth.

Trinity Boring Solutions crew running a 2 inch conduit directional bore with airport hangars and a parked jet in the background in Oklahoma City
Our crew running a 2 inch conduit bore near the hangars at an Oklahoma City airport.

Where is Rockwell Place near Canyon?

Rockwell Place is in Randall County, north of the county center, at an elevation of 3,631 feet and with 2.33 square miles of mapped land. For Rockwell Place work, we use ZIP codes 79015 and 79118 to identify the service area when coordinating underground crossings. Canyon, the county seat and nearest larger city, is 3.3 miles south; Timbercreek Canyon is 5.1 miles east, and Amarillo is 11.8 miles north. The Yukon, Oklahoma yard is 269 road miles away, a 5.1 hour drive. That distance is part of planning crew mobilization for work along Rockwell Road or Interstate 27.

Places near Rockwell Place

What boring work comes up near Greg Street in Rockwell Place?

  • Highway crossing: A route under Interstate 27 needs a bore plan that accounts for highway pavement, right of way and the line type.
  • Water service: For a connection near Rockwell Road, confirm the address provider before planning the route and pothole marked water lines.
  • Rail crossing: A proposed bore under BNSF Railway track needs an agreement with the track owner before crossing details are set.
  • Drainage crossing: Spring Draw is outside the mapped community boundary, so a route there needs channel planning and jurisdiction review.
  • Fiber conduit: A run along Greg Street can be routed beneath pavement rather than cutting across the street surface.
  • Electric conduit: Southwestern Public Service and Greenbelt Electric Cooperative report county service, but the owner at a Rockwell Place address must be confirmed.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

How do I get a quote for Rockwell Place work near Interstate 27?

For a Rockwell Place quote, send the address or map pin, what will go underground, the pipe or conduit size and the footage; a sketch or plans also help. That information lets us compare a route near Interstate 27 with one along Greg Street and account for the actual crossings and access.

Pullman clay loam matters first because sticky cuttings can require staged reaming and careful fluid control. The number of utilities to expose also changes the work, especially on a route along Rockwell Road. Interstate 27 or BNSF Railway crossings bring separate planning needs, while pavement, drainage crossings, pits and excavator time shape the job. Pipe size and bore length matter too. Mobilization is affected by the 269 road miles from Yukon, and high profile or emergency work can require a different plan.

Questions people ask about boring in Rockwell Place

Does Trinity take directional boring jobs in Rockwell Place, Randall County, and who staffs them?

Yes. Trinity takes directional boring work in Rockwell Place and across Texas. The work uses our crews or vetted partner contractor crews operating from satellite yards, with Trinity managing the job from the first call through the bore log. That lets customers along Rockwell Road work with Trinity regardless of which crew is at the site.

What ground does a bore go through in Rockwell Place Pullman soil?

The USDA soil survey maps Pullman soils across 94 percent of Rockwell Place, mostly as clay loam. At about 40 inches below the surface, clay loam is mapped across 99 percent of the area, and average clay content is 39 percent. That sticky material can build up on a reamer, so staged reaming and fluid control matter.

Will a bore in Rockwell Place encounter the deeper rock not ruled out by mapping?

The map does not show bedrock in the top five feet of Rockwell Place, but that does not rule out deeper rock. It shows the Blackwater Draw Formation, with sand, silt and locally clayey material, and Paleocene Cenozoic sedimentary rocks. The mapped information guides planning but does not replace checking the actual bore route.

Who approves a Rockwell Place bore under Interstate 27?

For work in the Interstate 27 right of way, the line owner applies through TxDOT’s RULIS system, and the TxDOT Amarillo District reviews it. We provide the bore plan and profile for the owner’s application and work under the issued permit. TxDOT’s required cover depends on the line type and the crossing conditions.

What does a Rockwell Place bore under BNSF Railway need?

A proposed bore under BNSF Railway track needs an agreement with the railroad that owns the track. For Rockwell Place crossings, we use the agreement to set casing, depth and flagging details for the bore. The railroad has 0.7 track miles inside Rockwell Place, so the planned route should be checked against the track before the bore is designed.

Can a line be bored under Spring Draw near Rockwell Place?

A line can be planned for a crossing under Spring Draw, but the route needs channel review and a check for U.S. Army Corps of Engineers jurisdiction. Spring Draw is mapped 0.7 miles outside the Rockwell Place boundary. The crossing design needs to match the actual channel and line route.

How much 811 notice does a Rockwell Place bore near Rockwell Road need?

Count back at least 48 hours from the planned start, excluding Saturdays, Sundays and legal holidays, before requesting a Texas811 locate for work near Rockwell Road. The request cannot be made more than 14 days ahead. If the start slips beyond that window, make a new request; have worn or moved marks refreshed before continuing.

How far is Rockwell Place from the Yukon office, and does Canyon affect the job?

Rockwell Place is 269 road miles and a 5.1 hour drive from Trinity’s Yukon, Oklahoma main office. Canyon is 3.3 miles south, but the Yukon distance can still affect mobilization for a bore near Greg Street or Interstate 27. The route, materials and site access also shape the work plan.

What affects the cost of directional boring in Rockwell Place near Interstate 27?

The job details determine the price, with Pullman clay loam and the number of utilities to expose among the main factors. Interstate 27 or BNSF Railway crossings, pavement, drainage, pits, excavator time, pipe size and bore length also affect the scope. Mobilization from the Yukon office matters because Rockwell Place is 269 road miles away.

Where the Rockwell Place facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Rockwell Place

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Rockwell Place, Texas

Type the address of your job in Rockwell Place. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Rockwell Place

Same county: Happy · Bushland · Umbarger. All counties: Texas county list.