trinityboringsolutions.com

Blanco Texas Directional Boring: Brackett Soil, Blanco River and US 281

Quick Answer: Blanco is an incorporated small city in Blanco County, so streets such as Mesquite Street belong to the city; we use directional boring, also called horizontal directional drilling (HDD), to cross them without opening pavement. Blanco River and US 281 are among the features a route may need to pass beneath. Our Yukon, Oklahoma main office is 449 road miles away, so a Mesquite Street job needs mobilization planned around that distance. Brackett soil covers 23 percent of Blanco, and shallow bedrock can make a bore slower than one through soil alone.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Blanco bores at a glance

  • Incorporated city in Blanco County, Texas. Population 2,077 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 449 miles, about 8.7 hours of driving.
  • Ground: Brackett soil is mapped on 23 percent of the area, with bedrock about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 61 percent of the area.
  • Highways inside the boundary: US 281, Loop 163, RM 165 and RM 1623. State permit office: TxDOT Austin District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Town Creek, Durham Branch, Blanco River and Koch Branch.
  • Public water: City of Blanco, surface water.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Which contractor handles directional boring near US 281 in Blanco?

We take directional boring work in Blanco, a small city in Blanco County with a population of 2,077, according to the Census Bureau Vintage 2024 estimate. A bore can place water, sewer, gas, electric conduit or fiber beneath streets such as Elm Street or along US 281, depending on the route and line owner. We also provide auger boring, hydrovac potholing and trenching for work around Blanco’s buried utilities.

Our main office is in Yukon, Oklahoma, and Blanco work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We have had no utility strike in over 25 years, a record that matters when a bore route meets the City of Blanco water system or electric lines reported in Blanco County. Our family business began in 1965 and has done directional boring since 1982.

Ditch Witch JT922 compact directional drill beside the Trinity Boring Solutions truck at NE 24th Street in Oklahoma City
Our Ditch Witch JT922 compact directional drill beside the Trinity truck on a sleeve bore at NE 24th Street in Oklahoma City. Photos on this page are from our jobs in Oklahoma and Texas.

What does the Blanco soil survey show about Brackett soil?

The USDA soil survey maps Brackett association, 1 to 8 percent slopes, across 23 percent of Blanco. Lewisville clay loam covers 16 percent, Doss silty clay covers 15 percent and Krum clay covers 13 percent. At about 40 inches below the surface, bedrock is mapped across 61 percent of the area; clay loam is mapped across 18 percent and clay across 13 percent. The survey reports an average clay content of 38 percent at that depth. These are mapped patterns, not test borings, so a route still needs site specific review.

USDA soil survey, inside the Blanco city limitsWhat is mapped
Soil series mappedBrackett 23 percent, Lewisville 17 percent, Doss 15 percent, Krum 13 percent and Tarpley 12 percent
Texture at the surfaceclay loam 46 percent, clay 25 percent and silty clay 15 percent
Texture about 40 inches downbedrock 61 percent, clay loam 18 percent and clay 13 percent
Engineering class about 40 inches downlean clay (CL) 19 percent, fat clay (CH) 13 percent and silty clay (CL ML) 4 percent
Average clay content about 40 inches down38 percent
Bedrock mapped within 60 inches61 percent of the area (18 percent hard rock, 43 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils3 percent of the area
High corrosion risk for uncoated steel64 percent of the area

The USDA soil survey maps bedrock within 60 inches across 61 percent of Blanco, with hard bedrock in 18 percent and weathered bedrock in 43 percent; typical bedrock depth is 17 inches. A hard rock section can call for slower drilling and a rock tool, while the soil to rock change can push the head off line. Seasonal water table is not mapped within 60 inches, but flood prone soils cover 3 percent. High steel corrosion risk is mapped across 64 percent, so the line owner should select any casing or tracer wire coating. The geologic map names Glen Rose Limestone, of Albian age.

How do we bore through Blanco bedrock and clay?

Brackett soil and bedrock mapped near the surface call for a bore plan that can change with the ground. On a Blanco route, we track the head, manage drilling fluid and adjust the reaming sequence to the material.

  1. Brackett soil has a mapped average clay content of 38 percent at about 40 inches, so we manage fluid and ream in stages to limit sticky buildup.
  2. With bedrock mapped within 60 inches across 61 percent of Blanco, we check changing ground conditions and use rock tooling where the material calls for it.
  3. Before approaching a marked line near the City of Blanco water system or an identified electric owner, we hydrovac pothole to establish its actual depth.
  4. For a Blanco River crossing, we plan the bore below the channel and check for U.S. Army Corps of Engineers jurisdiction before setting the route.
Rod box on the Vermeer D24x40 S3 Navigator with the bore path heading toward the trees on a rock bore in Guthrie, OK
Rod box on our Vermeer D24x40 with the bore path heading toward the trees on a rock bore in Guthrie, Oklahoma.

Which roads, tracks or creeks could a Blanco bore cross near Mesquite Street?

US 281, Loop 163, RM 165 and RM 1623 run within Blanco, with 4.0 mapped roadway miles of US 281 inside the city limits. Mesquite Street is the longest named street at 1.89 miles, followed by Sunset Ridge at 1.46 miles and Elm Street at 1.21 miles. Main Street adds another possible route. These road and street locations matter when choosing bore entry and exit pits; a route under existing pavement can avoid cutting across the surface.

CrossingTypeMapped extentWho has a say
US 281US highway4 roadway miles insideState highway office
Loop 163State highway1.8 roadway miles insideState highway office
RM 165State highway1 roadway miles insideState highway office
RM 1623State highway1 roadway miles insideState highway office
Town CreekStream1.53 channel miles insideChecked for Corps of Engineers jurisdiction
Durham BranchStream1.33 channel miles insideChecked for Corps of Engineers jurisdiction
Blanco RiverStream0.5 channel miles insideChecked for Corps of Engineers jurisdiction
Koch BranchStream0.03 channel miles insideChecked for Corps of Engineers jurisdiction
Hinds BranchStream nearby0.1 miles outsideChecked for Corps of Engineers jurisdiction
East Fork Hinds BranchStream nearby0.3 miles outsideChecked for Corps of Engineers jurisdiction
East Fork Hines BranchStream nearby0.3 miles outsideChecked for Corps of Engineers jurisdiction
West Fork Hines BranchStream nearby0.4 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Blanco or within one mile outside the limits, and no street and rail crossings are mapped. Town Creek has 1.53 channel miles inside the city, Durham Branch has 1.33, and the Blanco River has 0.5. Public records map 19 street crossings of named streams in Blanco. A creek route needs planning for channel depth and a check for federal waterway jurisdiction. No lakes or ponds are mapped within one mile.

Who approves a bore on Blanco County roads and highways?

US 281, Loop 163, RM 165 and RM 1623 are state roads, so work in their right of way needs a TxDOT utility permit reviewed by the TxDOT Austin District. The utility owner, not our crew, submits the application through TxDOT’s RULIS system; we supply the bore plan and profile and work under the permit issued to that owner. Blanco’s city streets, including Mesquite Street, belong to the city. The Blanco River and named creek crossings need a check for U.S. Army Corps of Engineers jurisdiction during planning. No railroad is mapped in or near the city limits.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Who owns the City of Blanco water lines and local electric service?

The City of Blanco public water system uses surface water and has 1,091 service connections serving 3,192 people. A bore near that system needs the water line located and exposed before drilling approaches it. Central Texas Electric Cooperative and Pedernales Electric Cooperative report electric service in Blanco County, but the line owner must be confirmed for a particular conduit route. That check matters on streets such as Main Street, where the route may meet more than one buried utility.

Line ownerWhat it isSourceSize
City of BlancoPublic water systemSurface water1,091 connections, 3,192 people served
Central Texas Electric Cooperative and Pedernales Electric CooperativeElectric utilities reporting service in Blanco CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Blanco’s median housing year at 1983; 33 percent of homes were built before 1960, and 32 percent were built in 2000 or later. Replacement work near Sunset Ridge may meet older lines, while newer services can call for a separate route. Before our drill nears a marked crossing, we hydrovac pothole to expose it. That lets us check the depth of City of Blanco water lines and electric lines whose owner has been identified.

Hydrovac truck and boring equipment staged beside an airport taxiway for utility daylighting in Oklahoma City
Our hydrovac truck and boring equipment beside an airport taxiway in Oklahoma City, set up to expose a utility crossing.

Where is Blanco in relation to Canyon Lake and Johnson City?

Blanco is in Blanco County at an elevation of 1,307 feet and covers 3.49 square miles. Its ZIP code is 78606. Johnson City, the county seat, is 12.0 miles north; Spring Branch is 15.4 miles south, and Canyon Lake, the nearest larger city, is 18.0 miles southeast. Stonewall is 18.1 miles northwest, and Woodcreek is 18.9 miles east. Blanco is 449 road miles and 8.7 drive hours from our Yukon, Oklahoma yard, a distance that affects mobilization for work near US 281 or the Blanco River.

Places near Blanco

What would we bore near Elm Street in Blanco?

  • Highway crossing: A bore beneath US 281 needs a route and pits that fit the TxDOT right of way and the pavement crossing.
  • Water service: A connection near the City of Blanco system needs the existing surface water line exposed before the drill approaches it.
  • Fiber route: A fiber bore along Mesquite Street can pass below pavement, with marked utilities exposed before drilling near them.
  • Creek crossing: A route beneath Town Creek needs channel depth planning and a jurisdiction check before the bore path is set.
  • Street replacement: A sewer or water replacement near Elm Street can use pits outside the pavement instead of cutting across the street.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What should I send for a Blanco bore quote near Main Street?

For a Blanco estimate, send the address or map pin, what will go in the ground, the pipe or conduit size and the footage; a sketch or plans help. A route near Main Street may differ from one under US 281 because pavement, road ownership and nearby utilities affect the bore plan.

In Blanco, the ground is the first pricing factor: Brackett soil and bedrock mapped near the surface can change drilling time and tooling. Next, the number of utilities to expose and any US 281 pavement or Blanco River crossing affect the scope. Pipe size, bore length, pits, excavator time and sand backfill also count. The 449 road miles from Yukon affect mobilization, while emergency or high profile work can add planning demands.

Questions people ask about boring in Blanco

Does Trinity take directional boring jobs in Blanco County, and who staffs them?

Yes. We take directional boring work in Blanco County and handle each job from the first call through the bore log. Our own crews or crews at satellite yards run by drilling contractors we have vetted can do the field work. A route near US 281 still needs its utilities located and its access planned.

Who controls Elm Street in Blanco, and can a bore avoid cutting it?

Blanco is an incorporated city, so its city streets, including Elm Street, belong to the city. Directional boring can place a line below pavement with entry and exit pits in dirt, avoiding an open cut across the street. The route and utility locations determine where those pits can go.

How do Blanco’s housing ages near Sunset Ridge affect replacement bores?

The American Community Survey 2019 to 2023 estimates put the median housing year in Blanco at 1983, with 33 percent of homes built before 1960. Older service lines may need replacement, while homes built in 2000 or later may need new service routes. Near Sunset Ridge, potholing helps locate existing lines before a replacement bore begins.

Does Brackett soil in Blanco create a corrosion issue for steel pipe?

The USDA soil survey maps high steel corrosion risk across 64 percent of Blanco, so the line owner should choose any coating for steel casing or tracer wire. HDPE is not affected by that soil corrosion concern. Brackett association is mapped across 23 percent of the city, but a site check is still needed for the planned route.

What ground does a bore pass through in Blanco’s Brackett soil areas?

The USDA soil survey maps Brackett association across 23 percent of Blanco. At about 40 inches below the surface, the mapped texture includes 18 percent clay loam and 13 percent clay, while bedrock is mapped across 61 percent. Those patterns can mean sticky clay in one section and rock tooling in another; they are not test borings.

How much of Blanco has bedrock mapped within five feet, and is it hard?

Bedrock is mapped within 60 inches across 61 percent of Blanco. The USDA soil survey maps hard bedrock in 18 percent of the area and weathered bedrock in 43 percent, with typical bedrock depth at 17 inches. A bore may need slower progress or rock tooling where hard limestone is encountered.

Does Trinity cover Johnson City and rural sites outside Blanco?

Yes. We serve Texas and take work outside Blanco, including routes toward Johnson City, 12.0 miles north, and rural sites beyond the city limits. Mobilization depends in part on the route from our Yukon, Oklahoma yard, which is 449 road miles from Blanco.

How much notice does Texas811 need for a bore on Mesquite Street in Blanco?

For a Mesquite Street bore, submit a Texas811 locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before the start. If work slips more than 14 days past the original notice, submit a new request. If marks wear off or move, have them refreshed before work continues.

What affects the cost of a directional bore under US 281 in Blanco?

The US 281 crossing route, pavement and required utility exposures affect the scope, as do bore length, pipe or conduit size, and Brackett soil or bedrock. Creek crossings, pits, excavator time and backfill can add work. Mobilization also matters because Blanco is 449 road miles from our Yukon yard. The price depends on those job details, not a fixed rate.

Where the Blanco facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Blanco

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Blanco, Texas

Type the address of your job in Blanco. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Blanco

Same county: Round Mountain. All counties: Texas county list.