Spring Branch Texas Directional Boring: Comfort Soil, US 281 and Cypress Creek
Quick Answer: Need a route beneath US 281 or Cypress Creek that leaves the surface intact? Trinity Boring Solutions handles directional boring, also called horizontal directional drilling (HDD), in Spring Branch, Texas, for crossings like these. Spring Branch is 464 road miles from our Yukon, Oklahoma main office, and Spring Branch Road is one local route a bore may follow. USDA maps show Comfort soil across 46 percent of the area, with bedrock mapped within 40 inches across 88 percent, so ground conditions shape the drilling plan.
Spring Branch bores at a glance
- Incorporated city in Comal County, Texas. Population 254 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 464 miles, about 9 hours of driving.
- Ground: Comfort soil is mapped on 46 percent of the area, with bedrock about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 88 percent of the area.
- Highways inside the boundary: US 281, FM 311 and FM 306. State permit office: TxDOT San Antonio District.
- Railroad track inside the boundary: none mapped.
- Named streams inside the boundary: Cypress Creek, Hanz Creek, Spring Branch and Guadalupe River.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who can I call for directional boring under US 281 in Spring Branch?
We take directional boring work in Spring Branch, in Comal County, where the Census Bureau Vintage 2024 estimate puts the population at 254. A water or sewer line could run beneath Spring Branch Road, while electric conduit, gas line or fiber could follow a route near US 281. We match the bore plan to the line, size and route, including the road or creek crossing.
Our main office is in Yukon, Oklahoma, and Spring Branch work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore is roughly 4,100 feet of 48 inch pipe under the Arkansas River in Tulsa. A typical Spring Branch job is much shorter, but a route beneath US 281 still calls for careful planning around the local ground and utilities.

What kind of ground does Comfort soil mean for Spring Branch bores?
The USDA soil survey maps Comfort soil across 46 percent of Spring Branch, often with very stony clay at the surface. Brackett is another mapped series at 13 percent. At about 40 inches below the surface, the survey maps bedrock across 88 percent of the area and silty clay across 7 percent; average clay content at that depth is 41 percent. No sandy area is mapped at that depth. These are mapped soil patterns, not test borings, so a specific route near Spring Branch Road may differ.
| USDA soil survey, inside the Spring Branch city limits | What is mapped |
|---|---|
| Soil series mapped | Comfort 46 percent, Brackett 13 percent, Bolar 9 percent, Lewisville 7 percent and Anhalt 5 percent |
| Texture at the surface | very stony clay 46 percent, paragravelly clay loam 12 percent and silty clay 11 percent |
| Texture about 40 inches down | bedrock 88 percent and silty clay 7 percent |
| Engineering class about 40 inches down | fat clay (CH) 9 percent |
| Average clay content about 40 inches down | 41 percent |
| Bedrock mapped within 60 inches | 88 percent of the area (65 percent hard rock, 23 percent weathered rock) |
| Seasonal water table within 60 inches | 0 percent of the area |
| Flood prone soils | 1 percent of the area |
| High corrosion risk for uncoated steel | 70 percent of the area |
Bedrock is mapped within 60 inches across 88 percent of Spring Branch, including hard bedrock across 65 percent and weathered bedrock across 23 percent. The mapped unit is the lower member of the Glen Rose Limestone, of Albian age, so a route may shift from soil into rock and need rock drilling equipment. The USDA survey maps no seasonal water table within 60 inches and flood prone soils across 1 percent. High steel corrosion risk is mapped across 70 percent, a concern for uncoated casing or tracer wire; the line owner selects any coating.
How do we bore Spring Branch bedrock and Comfort soil?
Comfort soil can be sticky, while the USDA survey maps shallow bedrock across much of Spring Branch. We set the drilling approach for the route, then adjust as the drill moves from soil toward the Glen Rose Limestone.
- Comfort soil can hold a hole but cling to the reamer, so we use staged reaming and manage drilling fluid as the bore advances.
- With bedrock mapped within 40 inches across much of Spring Branch, we plan for slower rock drilling where the route enters the Glen Rose Limestone.
- Before drilling near a marked line on Spring Branch Road, we expose it with hydrovac potholing; surface paint does not show its depth.
- We follow the drill head from above ground and record depth and pitch, which helps control the path near Cypress Creek.

What does a bore have to cross on Spring Branch Road?
US 281 runs through Spring Branch, along with FM 311 and FM 306, so a route beneath one of those roads needs a plan for the highway right of way. Spring Branch Road is the longest named street in the city at 2.94 miles. Ottie and Alfred Lane and Hidden Springs are also mapped streets. The route and road owner shape where entry and exit pits can fit, while boring can keep the road surface uncut.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| US 281 | US highway | 13.4 roadway miles inside | State highway office |
| FM 311 | State highway | 1.9 roadway miles inside | State highway office |
| FM 306 | State highway | 0.2 roadway miles inside | State highway office |
| Cypress Creek | Stream | 2.51 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Hanz Creek | Stream | 0.48 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Spring Branch | Stream | 0.37 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Guadalupe River | Stream | 0.32 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Swine Creek | Stream | 0.19 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Rebecca Creek | Stream nearby | 0.3 miles outside | Checked for Corps of Engineers jurisdiction |
| Elm Creek | Stream nearby | 0.3 miles outside | Checked for Corps of Engineers jurisdiction |
| Miller Creek | Stream nearby | 0.4 miles outside | Checked for Corps of Engineers jurisdiction |
| Ahern Creek | Stream nearby | 0.6 miles outside | Checked for Corps of Engineers jurisdiction |
No railroad is mapped inside Spring Branch or within 1 mile outside its limits, so a mapped rail crossing is not part of the local route picture. Cypress Creek runs 2.51 channel miles in the city, and 12 mapped street crossings intersect named streams. Hanz Creek and the Guadalupe River are also mapped within city limits. A proposed creek crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning.
Whose permission does Spring Branch work in Comal County need?
Spring Branch is incorporated, so its city streets belong to the city itself. For work in the right of way of US 281, FM 311 or FM 306, the utility owner applies for a TxDOT utility permit through RULIS, and the TxDOT San Antonio District reviews it. Electric and communication lines crossing a highway need 60 inches of cover below the lowest point of the grade; water lines need 60 inches, and pressurized sewer lines need 60 inches at crossings. The permit sets the approved plan and depth. A Cypress Creek crossing is checked for federal jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Which utilities need checking before a Spring Branch bore in Comal County?
The water provider for a specific Spring Branch address has to be confirmed with the city, Comal County or the local water district before planning a bore. For electricity, utilities reporting service in Comal County include City of New Braunfels, City of San Antonio, Guadalupe Valley Electric Cooperative and Pedernales Electric Cooperative. We confirm the owner of the line before planning an electric conduit bore along US 281 or another route.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of New Braunfels, City of San Antonio, Guadalupe Valley Electric Cooperative and Pedernales Electric Cooperative | Electric utilities reporting service in Comal County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put Spring Branch’s median housing year at 1949; 56 percent of units were built before 1960, and 21 percent were built in 2000 or later. That mix can mean a project replaces older service or extends a newer one near Spring Branch Road. We hydrovac pothole every marked utility on the route before drilling near it. For example, marked lines are exposed before a bore beneath Spring Branch Road, since paint shows location, not depth.

What is near Spring Branch, including Bulverde?
Spring Branch is in Comal County, covers 2.05 square miles and sits at an elevation of 1,026 feet. The ZIP code is 78070. Bulverde is 7.2 miles south, and Canyon Lake is 8.8 miles east; New Braunfels, the county seat, is 21.4 miles southeast. Spring Branch is 464 road miles and 9.0 drive hours from our Yukon, Oklahoma main office. That distance affects mobilization, so the route details and any creek or US 281 crossing help us plan the trip and equipment.
Places near Spring Branch
- Directional boring in Bulverde: 7.2 miles south
- Directional boring in Canyon Lake: 8.8 miles east
- Directional boring in Timberwood Park: 12.9 miles south
- Directional boring in Blanco: 15.4 miles north
- Directional boring in Fair Oaks Ranch: 16.4 miles southwest
What would we bore near Hidden Springs in Spring Branch?
- Highway crossing: A route beneath US 281 needs a bore plan that accounts for the highway right of way and mapped shallow bedrock.
- Water service: A service route near Spring Branch Road needs the address specific water provider confirmed before the bore is planned.
- Fiber conduit: A conduit route along Hidden Springs can avoid cutting the street when entry and exit pits fit the site.
- Creek crossing: A line beneath Cypress Creek needs a planned path and a check for U.S. Army Corps of Engineers jurisdiction.
- Electric conduit: Before a bore near FM 311, we confirm the line owner and expose marked utilities on the path.
- Sewer line: A route crossing US 281 needs the required highway cover and a plan for the pressurized sewer line.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What should I send for a Spring Branch quote near Cypress Creek?
For a Spring Branch quote, send the address or map pin, what will go in the ground, the pipe or conduit size and the footage; a sketch or plans help. A route near Cypress Creek or US 281 is useful to flag early because crossing conditions can change the equipment and bore profile.
The job details set the price. Spring Branch is 464 road miles from Yukon, so mobilization matters. Comfort soil and shallow mapped bedrock affect drilling time and tooling; a crossing at US 281 or Cypress Creek adds route and access planning. We also consider footage, pipe size, utilities to expose, pavement, creek or drainage crossings, pits, excavator time, sand backfill and whether the work is high profile or an emergency.
Questions people ask about boring in Spring Branch
Does Trinity Boring Solutions take directional boring jobs in Comal County near Spring Branch?
Yes. We take directional boring work in Spring Branch and across Texas. Our own crews and vetted partner drilling contractors can staff the work, with Trinity handling the job from the first call through the bore log. For a route in Comal County, the crew plan depends on the scope and where the bore falls.
Does Comfort soil in Spring Branch affect steel pipe or casing?
The concern is mapped soil corrosion risk, not the Comfort series name by itself. The USDA survey maps high steel corrosion risk across 70 percent of Spring Branch. The line owner chooses any coating for steel casing or tracer wire. HDPE is not affected by this soil corrosion concern, so the line material and owner’s requirements matter.
What ground does a bore pass through in Spring Branch Comfort soil?
Comfort soil covers 46 percent of Spring Branch in the USDA soil survey, with very stony clay mapped at the surface. At about 40 inches, bedrock is mapped across 88 percent and silty clay across 7 percent. That pattern suggests a route can move from sticky clay into rock, but it is not a test of any individual property.
How much rock is mapped within five feet of the surface in Spring Branch?
Bedrock is mapped within 60 inches across 88 percent of Spring Branch. The survey maps hard bedrock across 65 percent and weathered bedrock across 23 percent. A bore may meet rock at a different depth along its exact path, so we plan equipment for the mapped Glen Rose Limestone and adjust to field conditions.
Who approves a bore under US 281 in Spring Branch?
For work in the US 281 right of way, the utility owner submits the TxDOT utility permit application through RULIS. The TxDOT San Antonio District reviews it, and we provide the bore plan and profile for the utility owner’s filing. Cover requirements depend on the line type and the approved permit.
Can a line be bored under Cypress Creek in Spring Branch?
A bore can be planned for a Cypress Creek crossing, but the route and site conditions need review first. The creek runs 2.51 channel miles inside Spring Branch, and the crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning. The bore path and depth are set for the specific site.
Does Bulverde’s distance from Spring Branch affect a bore from Yukon?
Spring Branch is 464 road miles and 9.0 drive hours from our Yukon, Oklahoma main office; Bulverde is 7.2 miles south of Spring Branch. The Yukon distance affects mobilization and equipment planning. A map pin near US 281 or Spring Branch Road helps us understand the route and access before quoting.
How much Texas811 notice do I need for a bore on Spring Branch Road?
For work on Spring Branch Road, Texas law requires a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before it. If the start slips more than 14 days beyond the original notice, submit a new request. Have worn or moved marks refreshed through Texas811 before work continues.
What affects the cost of directional boring under US 281 in Spring Branch?
The price depends on the job scope, including bore length, pipe size, Comfort soil and shallow mapped bedrock, utilities to expose, pavement and access. A US 281 crossing can affect the plan, while Cypress Creek or drainage work can add planning and equipment needs. Spring Branch’s 464 road miles from Yukon also affects mobilization.
Where the Spring Branch facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Spring Branch
- U.S. Census Bureau, TIGER/Line 2024: Spring Branch boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Spring Branch
- U.S. Census Bureau, American Community Survey 2019 to 2023: Spring Branch housing units and year built
- Macrostrat geologic map compilation: map units under Spring Branch
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Comal County
- U.S. Geological Survey, Elevation Point Query Service: Spring Branch elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Spring Branch
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Spring Branch
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Spring Branch, Texas
Type the address of your job in Spring Branch. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Spring Branch
Same county: New Braunfels · Garden Ridge · Schertz. All counties: Texas county list.
