Directional Boring Contractors in Howard County, TX

Trinity Boring Solutions is a directional boring contractor serving Howard County, Texas, installing water, sewer, gas, electric and fiber lines without an open trench in Big Spring, Coahoma and Forsan. From the Trinity main office in Yukon, Oklahoma it is about 390 road miles southwest to Big Spring, the county seat. The usual crossings in Howard County are Interstate 20 and US 87, the North Concho River and Union Pacific track. Call (405) 409-7423 any time.

Free Bore Planner

Plan Your Bore in Howard County, Texas

Type the address of your job in Howard County. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

What Should You Know Before Boring in Howard County?

Howard County covers 901 square miles, has about 30,833 residents and sits in the TxDOT Abilene District.

County seatBig Spring
Population30,833 (2024 Census estimate), down 11.6% since 2020
Land area901 square miles
Largest cities and townsBig Spring (22,541), Coahoma (919) and Forsan (216)
TxDOT districtTxDOT Abilene District
811 centerTexas811 (call 811), two working days of notice
Electric utilitiesOncor Electric Delivery Company and Lyntegar Electric Cooperative
Interstate and US highwaysInterstate 20 and US 87
State Highways176 and 350
RiversNorth Concho River
Creeks and other streamsBeals Creek, Morgan Creek, Wildhorse Creek, Buzzard Draw, Elbow Creek, Moss Creek, Dobson Creek and Devils Creek
RailroadsUnion Pacific, about 33 main line miles
Average precipitation18.5 inches a year (1991 to 2020)
New housing units permitted6 in 2025
Road distance from Trinity main officeAbout 390 miles from Yukon, Oklahoma to Big Spring
Trinity insuranceGeneral liability of $1,000,000 per occurrence and $4,000,000 aggregate, plus $5,000,000 excess liability

Sources: Census Bureau (2024 population, 2025 building permits, TIGER/Line roads and water), EIA Form 861 (2025), NOAA 1991 to 2020 precipitation, federal rail network map, TxDOT districts, OpenStreetMap routing. Checked November 2026.

What Does a Bore Have to Cross in Howard County?

A bore in Howard County most often has to cross a highway such as Interstate 20, US 87 or State Highway 350, a stream such as the North Concho River, Beals Creek or Morgan Creek and Union Pacific track. State Highways 176 and 350 also run through the county. The Census map names 23 larger streams in Howard County, led by Beals Creek, Morgan Creek, Wildhorse Creek, Buzzard Draw, Elbow Creek and Moss Creek. The rest are Dobson Creek, Devils Creek, Powell Creek, Coahoma Draw, Dugout Creek, Chimney Creek, Big Sandy Draw, Mustang Draw, Bull Creek, Iatan Creek, Guthrie Draw, Wildcat Creek, Cannibal Draw, Little Sandy Draw, Willow Creek, Red Draw and North Concho River. The federal rail map shows about 33 miles of main line track in Howard County, owned by Union Pacific.

Trinity Boring Solutions horizontal directional drill rig set up on an open grass field with support trucks and a vacuum excavation truck
A Trinity Boring Solutions drill rig, support trucks and vacuum excavation truck on a jobsite.

What Is the Ground Like for Directional Boring in Howard County?

The ground in Howard County is mixed: according to the federal soil survey, fine sandy loam is the most common surface soil, a clay rich layer shows up in the top five feet on about 36 percent of the county, sandy layers on about 16 percent and bedrock within five feet on about 20 percent. No single soil dominates Howard County, so each bore path is potholed and the tooling matched to it. May is the wettest month in Howard County at 2.5 inches on average and December the driest at 0.7. Howard County averages 18.5 inches of precipitation a year, so the ground is usually dry at bore depth.

  • Most common soils: Amarillo (14%), Portales (8%) and Olton (6%).
  • Surface texture: most often fine sandy loam (23%) or loam (22%).
  • Bedrock within 5 feet: about 20% of the county. It is a mix of hard rock and softer weathered rock.
  • Caliche within 5 feet: about 4% of the county.
  • Clay rich layer (35% clay or more) in the top 5 feet: about 36% of the county.
  • Sandy layer (70% sand or more) in the top 5 feet: about 16% of the county.
  • Gravelly, cobbly or stony surface soil: about 13% of the county.

Source: USDA Natural Resources Conservation Service, Soil Survey Geographic Database, Howard County, Texas (survey area TX227, version 24, September 3, 2026), through Web Soil Survey. Percentages are shares of mapped county area.

Who Permits a Bore in Howard County?

The TxDOT Abilene District permits bores under state highways in Howard County, the Howard County Commissioners Court handles county roads, and Big Spring, Coahoma and Forsan each handle their own streets.

  • State highways. Interstate 20, US 87, the other numbered state routes and the farm to market roads in Howard County are on the state system. The utility owner files a TxDOT utility permit in RULIS.
  • Texas811 locates. Texas811 needs at least two working days of notice before digging (Texas811 FAQ; Texas Utilities Code, Section 251.151).
  • Railroads. A bore under Union Pacific track in Howard County needs a crossing agreement from the railroad that owns it, which sets the casing, depth and flagging.
  • Water crossings. A bore under the North Concho River or Beals Creek is checked for U.S. Army Corps of Engineers jurisdiction while the path is planned.

Statewide rules are on the Directional Boring Texas page, and Trinity supplies the bore plan and profile for the permit package.

Which Electric Utilities Serve Howard County?

Oncor Electric Delivery Company and Lyntegar Electric Cooperative serve Howard County, according to 2025 filings with the U.S. Energy Information Administration. Oncor Electric Delivery Company is an investor owned utility; Lyntegar Electric Cooperative is a member owned cooperative. Knowing which one holds the territory at the address is the first step on a conduit bore in Howard County. More on electric line boring for electric cooperatives.

How Much New Construction Is There in Howard County?

Howard County permitted 6 new housing units in 2025, all single family homes, according to the Census Bureau Building Permits Survey. The population of Howard County went from 34,860 in 2020 to 30,833 in 2024, a loss of 11.6 percent. Most bore work in Howard County is replacement and upgrade of lines already in the ground.

Which Cities and Towns in Howard County Does Trinity Serve?

Trinity takes directional boring work in all 3 incorporated places in Howard County and at sites outside city limits, and Big Spring is the largest with about 22,541 residents.

City or town2024 population
Big Spring22,541
Coahoma919
Forsan216

Source: U.S. Census Bureau 2024 estimates, counting only the part of each city inside Howard County.

Howard County borders Borden County, Dawson County, Glasscock County, Martin County, Mitchell County and Sterling County; every county is on the Directional Boring in All 254 Texas Counties page. The neighboring county seats are Gail (Borden), Lamesa (Dawson), Garden City (Glasscock), Stanton (Martin), Colorado City (Mitchell) and Sterling City (Sterling).

Which Directional Boring Services Are Available in Howard County?

Every Trinity service is available in Howard County: horizontal directional drilling from 3/4 inch service lines to 48 inch casing, auger boring, hydrovac potholing, trenching and 24 hour emergency response, all listed under Underground Utility and Boring Services.

The free Bore Planner sizes a Howard County job before you call.

Howard County Directional Boring FAQs: What Do Customers Ask?

Does Trinity Boring Solutions work in Big Spring, Texas?

Yes. Trinity Boring Solutions takes work in Big Spring, Coahoma and Forsan and the rural parts of Howard County. Trinity works in Texas with its own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted.

Who approves a bore under Interstate 20 in Howard County?

The TxDOT Abilene District. The utility owner files the permit in the TxDOT RULIS system. County roads go through the Howard County Commissioners Court and city streets through the city.

Is there rock in Howard County?

Yes, in places. The federal soil survey records bedrock within five feet of the surface on about 20 percent of Howard County, a mix of hard and soft, weathered rock. Potholing confirms it on the actual bore path.

Can a line be bored under the North Concho River in Howard County?

Yes. A drill is steered below the bed of the North Concho River from a pit on each bank and the pipe is pulled back through, so the channel is not opened. Federal jurisdiction over the crossing is checked first.

Which railroads have track in Howard County?

Union Pacific, with about 33 miles of main line track on the federal rail map. Each requires its own crossing agreement before a bore goes under the rails.

Is Trinity insured for work in Howard County?

Yes. Trinity Boring Solutions carries general liability of $1,000,000 per occurrence and $4,000,000 aggregate, plus $5,000,000 excess liability. Ask for a certificate with the quote.

How much does directional boring cost in Howard County?

A general range comes from the footage and the pipe size. Depth, the crossings and the ground set the number.

How Do You Get a Bore Quote in Howard County?

Call (405) 409-7423 any time or send the address in Howard County, the utility, the length and what it crosses. Trinity has bored since 1965 and is family owned.