Forsan Texas Directional Boring: Ector Soil, FM 461 and Edwards Limestone
Quick Answer: City of Forsan owns the groundwater well system, while Oncor Electric Delivery Company and Lyntegar Electric Cooperative report Howard County service; that distinction matters before routing a bore by FM 461. Trinity Boring Solutions takes directional boring, also called horizontal directional drilling (HDD), work in Texas for crossings near Rex Avenue and other Forsan streets. Forsan is 401 road miles from our Yukon, Oklahoma main office, and Avenue B helps define the local street network. Ector soil is very gravelly loam above shallow bedrock, so the route may shift from loose surface ground to hard drilling.
Forsan bores at a glance
- Incorporated city in Howard County, Texas. Population 216 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 401 miles, about 8 hours of driving.
- Ground: Ector soil is mapped on 88 percent of the area, with bedrock about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 99 percent of the area.
- Highways inside the boundary: FM 461. State permit office: TxDOT Abilene District.
- Railroad track inside the boundary: none mapped.
- Public water: City of Forsan, groundwater wells.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who can I call for directional boring in Forsan, Howard County?
Forsan has 216 residents, according to the Census Bureau Vintage 2024 estimate. We install water, sewer, gas, electric conduit and fiber for routes along streets such as Rex Avenue and Avenue B. Before planning a line there, we confirm the route and the owner of any existing utility it may cross. That check helps us set a bore path that fits the work on the ground.
Our main office is in Yukon, Oklahoma, and Forsan work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. A 3/4 inch service line near Avenue B and a 48 inch casing for a longer crossing by FM 461 illustrate the range we handle. Our family business started in 1965, and we have done directional boring since 1982, with bore lengths from 10 feet to 5,000 feet.

What kind of ground does Forsan Ector soil present?
The USDA soil survey maps Ector soils, moist, 1 to 8 percent slopes across 88 percent of Forsan, with Valera clay loam, 1 to 3 percent slopes mapped across 10 percent. The surface texture is very gravelly loam across 88 percent and clay across 11 percent. At about 40 inches below the surface, bedrock is the mapped texture across 98 percent of the area. We use the mapped Ector and Valera soil patterns as planning context, not as a substitute for test borings. Gravelly ground can loosen behind the bit, so the plan needs to account for keeping the hole open as the pipe goes in.
| USDA soil survey, inside the Forsan city limits | What is mapped |
|---|---|
| Soil series mapped | Ector 88 percent and Valera 10 percent |
| Texture at the surface | very gravelly loam 88 percent and clay 11 percent |
| Texture about 40 inches down | bedrock 98 percent |
| Average clay content about 40 inches down | 45 percent |
| Bedrock mapped within 60 inches | 99 percent of the area (99 percent hard rock, 0 percent weathered rock) |
| Seasonal water table within 60 inches | 0 percent of the area |
| Flood prone soils | 0 percent of the area |
| High corrosion risk for uncoated steel | 12 percent of the area |
Bedrock is mapped within 60 inches across 99 percent of Forsan and within 40 inches across 98 percent; hard bedrock is mapped within 60 inches across 99 percent. That suggests the drill may meet hard material at shallow depth, and the soil to rock contact can push the head off line. Because seasonal water tables and flood prone soils are not mapped in Howard County, we verify conditions before setting a bore path. For a bore beneath FM 461, we account for mapped high steel corrosion risk across 12 percent and discuss casing and tracer wire materials with the line owner. The geologic map includes Edwards Limestone of Albian age, another indication to plan for rock rather than assume a soil only bore.
What does it take to bore Forsan bedrock?
Forsan soil mapping puts shallow bedrock on the route planning list, especially around Rex Avenue. We track the drill head from the surface and log depth and pitch as the bore advances, adjusting the approach when the ground changes.
- Ector soil is very gravelly at the surface, so we use staged reaming and have the pipe ready before the final pass can leave the hole open.
- With hard bedrock mapped across 99 percent of Forsan within 60 inches, a rock bit or mud motor may be needed, and drilling can take longer.
- A soil to rock change near Rex Avenue can deflect the drill head, so we check depth and pitch with the walkover locator as each rod advances.
- Every marked utility on the bore path gets exposed with hydrovac before drilling near it; for example, we would pothole a marked line crossing a route along Avenue B.

What is in the way of a new line in Forsan by FM 461?
FM 461 is the state highway mapped inside Forsan, with 0.3 roadway miles in the city. No other state highway, farm to market road or ranch to market road is mapped within 1.5 miles outside the limits. Rex Avenue is the longest named street at 0.5 miles, followed by Avenue B at 0.48 miles and Main Street at 0.46 miles. A bore near those streets needs a route checked against the actual pavement and existing utilities, while a highway crossing calls for separate TxDOT planning.
No railroad is mapped inside Forsan or within 1 mile outside the limits, so the public records show no local track route to plan around. No named streams, lakes or ponds are mapped inside or within 1 mile of the city, and no street crossing of a named stream is mapped. That does not identify every feature at a jobsite, so a proposed route near FM 461 or Rex Avenue still needs a site review before drilling.
Who approves a Forsan bore on FM 461 in Howard County?
FM 461 is the state highway in Forsan, so a utility bore in its right of way needs a TxDOT utility permit. The TxDOT Abilene District reviews the application. The utility that owns the line files through TxDOT’s online RULIS system; we prepare the bore plan and profile for the utility owner and work under its permit. TxDOT rules call for boring or tunneling beneath existing highway pavement, with the bore extending under all travel lanes on rural highways. As Forsan is an incorporated city, we treat Main Street and Avenue B as city streets when planning a bore. No railroad or named stream crossing is mapped in the city.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Who owns the lines near the City of Forsan water system?
The City of Forsan public water system is locally owned and draws from groundwater wells. Forsan public records list 104 service connections and 228 people served, useful context when we plan nearby underground work. Oncor Electric Delivery Company and Lyntegar Electric Cooperative report electric service in Howard County, but that does not establish which one serves a particular Forsan address. Before planning an electric conduit bore near Rex Avenue, we confirm the line owner and the conduit requirements for that route.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of Forsan | Public water system | Groundwater wells | 104 connections, 228 people served |
| Oncor Electric Delivery Company and Lyntegar Electric Cooperative | Electric utilities reporting service in Howard County | EIA Form 861 | Confirm the line owner by address |
Forsan’s 2019 to 2023 five year estimates put the median housing year at 1973, context we consider when planning nearby underground work. Forsan’s estimates put 40 percent of homes before 1960, 51 percent from 1960 to 1999, and 9 percent in 2000 or later, context for careful utility locating. A job near Avenue B may involve an existing service or a new connection, and the age mix makes it important to check what is already buried. On Avenue G in Forsan, we hydrovac pothole each marked utility along the bore path before drilling nearby.

Do you cover Forsan and Big Spring?
Forsan is in Howard County, at an elevation of 2,789 feet, and covers 0.29 square miles. Its ZIP code is 79733. Big Spring, the county seat and nearest larger city, is 11.3 miles northwest; Sand Springs is 11.8 miles north, and Coahoma is 13.2 miles north. Garden City is 17.9 miles southwest, while Stanton is 25.0 miles west. Our Yukon, Oklahoma main office is 401 road miles away, an 8.0 hour drive. We serve Oklahoma and Texas and take work across Texas, including Forsan and rural sites beyond the city limits.
Places near Forsan
- Directional boring in Big Spring: 11.3 miles northwest
- Directional boring in Sand Springs: 11.8 miles north
- Directional boring in Coahoma: 13.2 miles north
- Directional boring in Garden City: 17.9 miles southwest
- Directional boring in Stanton: 25 miles west
What would we bore near Avenue B in Forsan?
- Highway crossing: A bore under FM 461 needs a route that clears pavement and follows the TxDOT permit issued to the utility owner.
- Water service: A connection near Rex Avenue can be planned around the City of Forsan groundwater well system and the existing lines at the address.
- Fiber route: A fiber bore along Avenue B can pass beneath street pavement without cutting the surface, after marked utilities are exposed.
- Electric conduit: A conduit route by Main Street starts with confirming which reported Howard County electric provider owns the line at that address.
- Sewer line: A sewer bore near 4th Street can use entry and exit pits in the dirt while leaving the street surface uncut.
- Longer casing: A casing route near FM 461 needs its length, size and shallow bedrock conditions checked before the bore plan is set.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
How do I get a quote for Forsan work near Rex Avenue?
A map pin near Rex Avenue or FM 461 matters because the exact route determines whether the bore meets street pavement, the state highway or existing utilities. Send the address or pin, what will go in the ground, the pipe or conduit size and footage. A sketch or plans help us see the entry and exit points and review the route before preparing a quote.
A direct route along Avenue B with a clear path and few utility crossings is simpler to plan than a bore with shallow rock or pavement constraints by FM 461. Price depends on length, pipe or conduit size, soil and rock, utilities that need exposure, pavement, pits and excavator time. The mapped Ector soil and shallow bedrock can affect drilling; the number of crossings to expose also matters. Mobilization reflects the 401 road miles from Yukon, and high profile or emergency work changes the job scope.
Questions people ask about boring in Forsan
Does Trinity take directional boring jobs in Forsan, Howard County, and who staffs them?
Yes. We take directional boring work in Forsan along FM 461 and throughout Texas, with each crossing planned around local conditions. Our main office is in Yukon, Oklahoma, and we use our own crews as well as crews from partner contractor yards we have vetted. You work with Trinity from the first call through the bore log, including for a route along Rex Avenue.
What ground should I expect on an Ector soil bore in Forsan?
The USDA soil survey maps Ector soils across 88 percent of Forsan, with very gravelly loam as the main surface texture. At about 40 inches below the surface, bedrock is mapped as the texture across 98 percent of the area. Those are mapped conditions rather than test borings, so the exact route near Avenue B still needs field planning.
How much of Forsan has bedrock mapped within five feet?
Bedrock is mapped within 60 inches across 99 percent of Forsan, and hard bedrock is mapped within that depth across 99 percent as well. Weathered bedrock is not mapped within 60 inches. A bore near FM 461 may therefore need rock capable tooling, but a site check determines what the drill actually meets.
Who approves a bore under FM 461 in Forsan, and which state office reviews it?
The utility owner applies for the TxDOT utility permit, and the TxDOT Abilene District reviews it. For a crossing beneath FM 461, the utility owner files through the online RULIS system, while we prepare the bore plan and profile. For work beneath FM 461 pavement in Forsan, we follow TxDOT rules calling for boring or tunneling under existing highway pavement.
Who operates Forsan’s public water system, and where does its water come from before we plan a crossing on Avenue H?
The City of Forsan owns and runs the public water system, which uses groundwater wells. Public records list 104 service connections serving 228 people. If a proposed bore near Rex Avenue is for a water line, we still confirm the existing route and expose marked utilities before the drill approaches them.
Which electric company owns the lines at a Forsan, Howard County address?
Oncor Electric Delivery Company and Lyntegar Electric Cooperative report electric service in Howard County. Those countywide records do not identify the provider at every Forsan address, so the line owner must be confirmed before a conduit bore. That check matters for a proposed route along Avenue B as much as anywhere else in town.
Does Trinity cover Big Spring and rural sites outside Forsan?
Yes. We take work across Texas, including Big Spring, 11.3 miles northwest of Forsan, and rural sites outside the city limits. The actual address and route still shape the plan. A job near FM 461 has different pavement and permit considerations from a route on a Forsan street such as Rex Avenue.
How early should I request utility marks for a Forsan bore near Rex Avenue?
Texas811 needs the locate request at least 48 hours before excavation begins, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before it. Marks show line position, not depth. If marks near Rex Avenue wear off or move, request refreshed marks through Texas811 before work continues; a start delayed more than 14 days needs a new notice.
What affects the cost of a directional bore under FM 461 in Forsan?
The job details determine the price: bore length and pipe size, shallow Ector soil and bedrock, utilities to expose, pavement, pits and excavator time all matter. The route under FM 461 adds highway planning, while a longer mobilization from the Yukon office affects the scope. A map pin and plans help us assess those conditions without guessing.
Where the Forsan facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Forsan
- U.S. Census Bureau, TIGER/Line 2024: Forsan boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Forsan
- U.S. Census Bureau, American Community Survey 2019 to 2023: Forsan housing units and year built
- Macrostrat geologic map compilation: map units under Forsan
- U.S. EPA Safe Drinking Water Information System: public water systems serving Forsan
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Howard County
- U.S. Geological Survey, Elevation Point Query Service: Forsan elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Forsan
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Forsan
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Forsan, Texas
Type the address of your job in Forsan. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Forsan
All counties: Texas county list.
