Directional Boring Contractors in Kimble County, TX

Trinity Boring Solutions is a directional boring contractor serving Kimble County, Texas, installing water, sewer, gas, electric and fiber lines without an open trench in Junction. From the Trinity main office in Yukon, Oklahoma it is about 440 road miles south to Junction, the county seat. Most Kimble County bores go under Interstate 10 and US 377 and the Llano River. Call (405) 409-7423 any time.

Free Bore Planner

Plan Your Bore in Kimble County, Texas

Type the address of your job in Kimble County. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

What Should You Know Before Boring in Kimble County?

Kimble County covers 1,251 square miles, has about 4,401 residents and sits in the TxDOT San Angelo District.

County seatJunction
Population4,401 (2024 Census estimate), up 2.8% since 2020
Land area1,251 square miles
Largest cities and townsJunction (2,492)
TxDOT districtTxDOT San Angelo District
811 centerTexas811 (call 811), two working days of notice
Electric utilitiesAEP Texas North, Central Texas Electric Cooperative and Pedernales Electric Cooperative
Interstate and US highwaysInterstate 10, US 377, US 83 and US 290
State loops and spursLoop 291
RiversLlano River, North Llano River, South Llano River, Little Devils River and James River
Creeks and other streamsCedar Creek, Johnson Fork, Gentry Creek, Big Saline Creek, Bear Creek, Maynard Creek, Dry Cedar Creek and Chalk Creek
RailroadsNo main line track
Average precipitation24.9 inches a year (1991 to 2020)
New housing units permitted1 in 2025
Road distance from Trinity main officeAbout 440 miles from Yukon, Oklahoma to Junction
Trinity insuranceGeneral liability of $1,000,000 per occurrence and $4,000,000 aggregate, plus $5,000,000 excess liability

Sources: Census Bureau (2024 population, 2025 building permits, TIGER/Line roads and water), EIA Form 861 (2025), NOAA 1991 to 2020 precipitation, federal rail network map, TxDOT districts, OpenStreetMap routing. Checked November 2026.

What Does a Bore Have to Cross in Kimble County?

A bore in Kimble County most often has to cross a highway such as Interstate 10, US 377 or US 83 and a stream such as the Llano River, the North Llano River or Cedar Creek. The Census map names 25 larger streams in Kimble County, led by the Llano River, the North Llano River, Cedar Creek, the South Llano River, Johnson Fork and Gentry Creek. The rest are Big Saline Creek, Bear Creek, Little Devils River, James River, Maynard Creek, Dry Cedar Creek, Chalk Creek, West Bear Creek, Red Creek, East Copperas Creek, Bois D Arc Creek, Salty Creek, West Copperas Creek, Salina Creek, Sycamore Creek, Little Saline Creek, Middle Copperas Creek, White Oak Creek and Cedar Branch. There is no main line railroad in Kimble County.

Trinity Boring Solutions horizontal directional drill rig set up on an open grass field with support trucks and a vacuum excavation truck
A Trinity Boring Solutions drill rig, support trucks and vacuum excavation truck on a jobsite.

What Is the Ground Like for Directional Boring in Kimble County?

Rock is the main thing to plan for in Kimble County: the federal soil survey records bedrock within five feet of the surface on about 83 percent of the county, most of it hard rock. Depth to rock in Kimble County is confirmed by potholing before the rig is set, and rock tooling is loaded when the path cannot avoid it. May is the wettest month in Kimble County at 3.3 inches on average and January the driest at 1.2. Kimble County averages 24.9 inches of precipitation a year, so the ground is usually dry at bore depth.

  • Most common soils: Tarrant (64%), Nuvalde (5%) and Kavett (3%).
  • Surface texture: most often very cobbly clay (62%) or clay loam (6%).
  • Bedrock within 5 feet: about 83% of the county. Most of it is hard rock. Rock outcrop is mapped on about 4%.
  • Caliche within 5 feet: about 8% of the county.
  • Clay rich layer (35% clay or more) in the top 5 feet: about 74% of the county.
  • Gravelly, cobbly or stony surface soil: about 69% of the county.

Source: USDA Natural Resources Conservation Service, Soil Survey Geographic Database, Kimble County, Texas (survey area TX267, version 23, September 3, 2026), through Web Soil Survey. Percentages are shares of mapped county area.

Who Permits a Bore in Kimble County?

The TxDOT San Angelo District permits bores under state highways in Kimble County, the Kimble County Commissioners Court handles county roads, and Junction handles its own streets.

  • State highways. Interstate 10, US 377, US 83, US 290, the other numbered state routes and the farm to market roads in Kimble County are on the state system. The utility owner files a TxDOT utility permit in RULIS.
  • Texas811 locates. Texas811 needs at least two working days of notice before digging (Texas811 FAQ; Texas Utilities Code, Section 251.151).
  • Water crossings. A bore under the Llano River, the North Llano River or Cedar Creek is checked for U.S. Army Corps of Engineers jurisdiction while the path is planned.

Statewide rules are on the Directional Boring Texas page, and Trinity supplies the bore plan and profile for the permit package.

Which Electric Utilities Serve Kimble County?

AEP Texas North, Central Texas Electric Cooperative and Pedernales Electric Cooperative serve Kimble County, according to 2025 filings with the U.S. Energy Information Administration. AEP Texas North is an investor owned utility; Central Texas Electric Cooperative and Pedernales Electric Cooperative are member owned cooperatives. The owner of the line sets the conduit size, depth and inspection steps, so it is confirmed before a conduit bore in Kimble County is planned. More on electric line boring for electric cooperatives.

How Much New Construction Is There in Kimble County?

Kimble County permitted 1 new housing unit in 2025, a single family home, according to the Census Bureau Building Permits Survey. The population of Kimble County went from 4,282 in 2020 to 4,401 in 2024, a gain of 2.8 percent. Bore work in Kimble County is a mix of new services and replacement of older lines.

Which Cities and Towns in Kimble County Does Trinity Serve?

Trinity takes directional boring work in Junction, the only incorporated place in Kimble County with about 2,492 residents, and at sites outside the city limits.

City or town2024 population
Junction2,492

Source: U.S. Census Bureau 2024 estimates, counting only the part of each city inside Kimble County.

Kimble County borders Edwards County, Gillespie County, Kerr County, Mason County, Menard County, Schleicher County and Sutton County; every county is on the Directional Boring in All 254 Texas Counties page. The neighboring county seats are Rocksprings (Edwards), Fredericksburg (Gillespie), Kerrville (Kerr), Mason (Mason), Menard (Menard), Eldorado (Schleicher) and Sonora (Sutton).

Which Directional Boring Services Are Available in Kimble County?

Every Trinity service is available in Kimble County: horizontal directional drilling from 3/4 inch service lines to 48 inch casing, auger boring, hydrovac potholing, trenching and 24 hour emergency response, all listed under Underground Utility and Boring Services.

The free Bore Planner sizes a Kimble County job before you call.

Kimble County Directional Boring FAQs: What Do Customers Ask?

Does Trinity Boring Solutions work in Junction, Texas?

Yes. Trinity Boring Solutions takes work in Junction and the rural parts of Kimble County. Trinity works in Texas with its own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted.

Who approves a bore under Interstate 10 in Kimble County?

The TxDOT San Angelo District. The utility owner files the permit in the TxDOT RULIS system. County roads go through the Kimble County Commissioners Court and city streets through the city.

Is there rock in Kimble County?

Yes, in places. The federal soil survey records bedrock within five feet of the surface on about 83 percent of Kimble County, most of it hard rock. Caliche shows up within five feet on about 8 percent. Potholing confirms it on the actual bore path.

Can a line be bored under the Llano River in Kimble County?

Yes. A drill is steered below the bed of the Llano River from a pit on each bank and the pipe is pulled back through, so the channel is not opened. Federal jurisdiction over the crossing is checked first.

Is Trinity insured for work in Kimble County?

Yes. Trinity Boring Solutions carries general liability of $1,000,000 per occurrence and $4,000,000 aggregate, plus $5,000,000 excess liability. Ask for a certificate with the quote.

How much does directional boring cost in Kimble County?

Our price starts from a general range for the length and the pipe size. Depth, the crossings and the ground set the number, and rock is a factor on many Kimble County jobs.

How Do You Get a Bore Quote in Kimble County?

Call (405) 409-7423 any time or send the address in Kimble County, the utility, the length and what it crosses. Trinity has bored since 1965 and is family owned.