trinityboringsolutions.com

Del Rio Texas Directional Boring: Coahuila Clay Loam, Union Pacific and San Felipe Creek

Quick Answer: The top five feet in Del Rio are mapped mainly as clay loam and silty clay loam, with Salmon Peak Limestone appearing in the geologic mapping. We take directional boring, also called horizontal directional drilling (HDD), for routes beneath US 90 without cutting its pavement. Del Rio is 538 road miles from our Yukon, Oklahoma main office, and Union Pacific track is one local crossing to plan around. Coahuila clay can stick to a reamer, so staged passes and controlled drilling fluid help keep the bore on line.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Del Rio bores at a glance

  • County seat of Val Verde County, Texas. Population 34,678 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 538 miles, about 10.7 hours of driving.
  • Ground: Coahuila soil is mapped on 40 percent of the area, with silty clay loam about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 6 percent of the area.
  • Highways inside the boundary: US 90, US 277, US 377, US 79 and Spur 317. State permit office: TxDOT Laredo District.
  • Railroad track inside the boundary: Union Pacific, with 11 mapped street and rail crossings.
  • Named streams inside the boundary: San Felipe Creek, Calaveras Creek and Zorro Creek.
  • Public water: Del Rio Utilities Commission, groundwater under the influence of surface water.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who can I call for directional boring under Union Pacific in Del Rio?

Trinity Boring Solutions takes directional boring work in Del Rio, where Coahuila clay loam and US 90 shape routes for water, sewer, gas, electric conduit and fiber lines along Avenue F and other streets. The Census Bureau Vintage 2024 estimate puts Del Rio at 34,678 residents in Val Verde County. We plan line routes around the city’s 303.27 public road centerline miles and the specific crossings on each job.

Our main office is in Yukon, Oklahoma, and Del Rio work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We have had no utility strike in over 25 years, a record that matters where a new route must avoid Del Rio Utilities Commission water lines or Union Pacific track. Our family business started in 1965 and has done directional boring since 1982, experience we bring to planning underground work for Del Rio.

Aerial view of a bore pit with drill rig and conduit alongside a directional drill rig and conduit on a concrete lot
Our crew at a bore pit beside the directional drill on a conduit job, seen from above. Photos on this page are from our jobs in Oklahoma and Texas.

What kind of ground does Coahuila soil mean for a bore in Del Rio?

The USDA soil survey maps Coahuila clay loam, with 0 to 3 percent slopes, across 40 percent of Del Rio. Zapata and Vinegarroon complex covers 18 percent, while Reynosa silty clay loam accounts for 10 percent. At about 40 inches below the surface, silty clay loam is mapped under 50 percent of the city, and cemented material under 27 percent. The average clay content at that depth is 40 percent, and heavy clay is mapped across 58 percent. We use mapped soil patterns to inform preliminary boring plans in Del Rio, while treating them as maps rather than test borings.

USDA soil survey, inside the Del Rio city limitsWhat is mapped
Soil series mappedCoahuila 40 percent, Zapata 18 percent, Reynosa 10 percent, Olmos 9 percent and Acuna 8 percent
Texture at the surfaceclay loam 58 percent, silty clay loam 12 percent and very cobbly loam 9 percent
Texture about 40 inches downsilty clay loam 50 percent, cemented material 27 percent and silty clay 8 percent
Engineering class about 40 inches downlean clay (CL) 61 percent and fat clay (CH) 7 percent
Average clay content about 40 inches down40 percent
Bedrock mapped within 60 inches6 percent of the area (4 percent hard rock, 2 percent weathered rock)
Seasonal water table within 60 inches1 percent of the area
Flood prone soils1 percent of the area
High corrosion risk for uncoated steel58 percent of the area

Bedrock is mapped within 60 inches in 6 percent of Del Rio, including hard bedrock in 4 percent and weathered bedrock in 2 percent; the typical mapped depth is 17 inches. Salmon Peak Limestone is the local Cretaceous geologic unit, so a route can meet rock even where soil dominates. A seasonal water table within 60 inches is mapped in 1 percent, as are flood prone soils. High steel corrosion risk covers 58 percent, so the line owner should consider casing and tracer wire materials; HDPE is not affected by that soil condition.

What does it take to bore Del Rio’s silty clay loam?

Del Rio’s mapped silty clay loam and heavy clay call for controlled fluid and staged reaming. Along streets such as Avenue F, we also plan around pavement and expose marked lines before drilling near them.

  1. Coahuila clay can ball up on a reamer, so we use thinner fluid with polymer and open the hole in stages before pulling pipe.
  2. Where Del Rio’s heavy clay is mapped, we watch fluid returns closely so pressure does not lift pavement along Avenue F.
  3. At a San Felipe Creek crossing, we plan the bore below the channel and check whether the route falls under U.S. Army Corps of Engineers jurisdiction.
  4. We hydrovac marked utilities along Chapman Road before drilling near them, then track the drill head from the surface and log depth and pitch.
Drilling fluid returns at the entry as the Vermeer D24x40 S3 drills a 385 foot sandstone rock bore in Guthrie, Oklahoma
Drilling fluid coming back to the entry pit as our Vermeer D24x40 drills a 385 foot bore in Guthrie, Oklahoma.

What does a bore have to cross near San Felipe Creek in Del Rio?

US 90, US 277, US 377 and US 79 run through Del Rio, along with Spur 317, RM 2523 and Spur 297. A utility route beneath existing highway pavement is bored or tunneled rather than trenched through it. Avenue F extends 7.41 miles within the city, while Main Street runs 3.17 miles and Kings Way 3.01 miles. Chapman Road adds another 2.5 miles of named street to consider when laying out access, pits and a bore path.

CrossingTypeMapped extentWho has a say
US 90US highway17.5 roadway miles insideState highway office
US 277US highway10.3 roadway miles insideState highway office
US 377US highway7.7 roadway miles insideState highway office
US 79US highway2.5 roadway miles insideState highway office
Spur 317State highway2.9 roadway miles insideState highway office
RM 2523State highway0.4 roadway miles insideState highway office
Spur 297State highway0.2 roadway miles insideState highway office
Union PacificRailroad6 track miles insideThe railroad
San Felipe CreekStream4.77 channel miles insideChecked for Corps of Engineers jurisdiction
Calaveras CreekStream3.05 channel miles insideChecked for Corps of Engineers jurisdiction
Zorro CreekStream2.49 channel miles insideChecked for Corps of Engineers jurisdiction
GrandeStream nearbyAlong the boundaryChecked for Corps of Engineers jurisdiction
Cienegas CreekStream nearbyAlong the boundaryChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

Union Pacific has 6.0 track miles in Del Rio, and 11 mapped street and rail crossings make track locations part of route planning. San Felipe Creek runs 4.77 channel miles in the city; Calaveras Creek and Zorro Creek are also mapped, with 15 street crossings of named streams in total. The survey maps no lakes or ponds within one mile, but a creek route still needs channel depth planning and a jurisdiction check.

Do I need a permit to bore in Del Rio and Val Verde County?

A bore in the US 90 right of way needs a TxDOT utility permit, reviewed by the TxDOT Laredo District; the utility that owns the line submits the application through RULIS, and we prepare the bore plan and profile for that filing. The same state process applies to US 277, US 377, US 79 and state highways. For city streets such as Avenue F, the city controls street work. A Union Pacific track crossing needs an agreement with the railroad, and a San Felipe Creek crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Which utilities are near Del Rio Utilities Commission lines?

Del Rio Utilities Commission, a local government system, serves 36,506 people through 20,234 connections and uses groundwater under the influence of surface water. Electric service reported in Val Verde County includes AEP Texas Central, Rio Grande Electric Cooperative and Southwest Texas Electric Cooperative. The county listings do not identify the provider at every address, so we confirm the line owner before planning an electric conduit bore near Avenue F or another route.

Line ownerWhat it isSourceSize
Del Rio Utilities CommissionPublic water systemGroundwater under the influence of surface water20,234 connections, 36,506 people served
AEP Texas Central, Rio Grande Electric Cooperative and Southwest Texas Electric CooperativeElectric utilities reporting service in Val Verde CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Del Rio’s median housing year at 1979; 17 percent of homes were built before 1960, and 19 percent in 2000 or later. That mix means a job may involve either replacing an older service or adding a new connection near Chapman Road. Before the drill approaches marked lines, we hydrovac pothole them to check depth, since locate paint shows position, not how deep a line sits.

Trinity Boring Solutions technician hydrovac daylighting along a commercial curbline during utility locating in Oklahoma City
Hydrovac daylighting along a commercial curb line in Oklahoma City to find the utilities before a bore.

How far is Val Verde Park from Del Rio, and what area do we cover?

Del Rio is the county seat of Val Verde County, at an elevation of 972 feet, and covers 20.46 square miles. We use ZIP code 78840 as a location reference for Del Rio boring plans. Val Verde Park is 3.1 miles east, and Cienegas Terrace is 3.7 miles west; Laughlin AFB is 6.4 miles east. Del Rio is 538 road miles and a 10.7 hour drive from our Yukon, Oklahoma yard, so distance is part of planning a crew mobilization for work in the city or surrounding rural areas.

Places near Del Rio

What boring work comes up along Avenue F in Del Rio?

  • Highway crossing: A bore beneath US 90 keeps the route under pavement instead of cutting across its travel lanes.
  • Water service: A connection near Del Rio Utilities Commission lines needs a route that accounts for existing services and marked utilities.
  • Fiber conduit: Avenue F’s long street corridor can call for a bore that passes beneath pavement and driveways without opening a trench.
  • Creek crossing: A route beneath San Felipe Creek needs depth planning below the channel and a jurisdiction check during planning.
  • Rail crossing: A utility route beneath Union Pacific track needs railroad coordination and crossing conditions worked into the bore plan.
  • Street connection: Chapman Road access can shape pit placement and the route for a water, sewer or electric conduit service.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What should I send for a Del Rio quote near Chapman Road?

A map pin matters near Chapman Road because the exact spot sets the access, crossings and pit locations. Send the address, what is going in the ground, the pipe or conduit size and the footage. A sketch or plans help us see how the route meets Avenue F, a Union Pacific track or another local feature before we scope the bore.

The price follows the work on the ground, crossings and logistics. Coahuila clay and mapped cemented material can change drilling and reaming needs; a crossing under US 90 or Union Pacific adds route and approval details. San Felipe Creek can affect depth and planning. Pavement, exposed utilities, pit and excavator time, sand backfill, line size and length also shape the job. Del Rio’s 538 road miles from Yukon affect mobilization.

Questions people ask about boring in Del Rio

Does Trinity Boring Solutions take directional boring work in Del Rio and Val Verde County?

Yes. We take directional boring work in Del Rio and staff it with our own crews or crews from vetted partner drilling contractors working from satellite yards. Our main office is in Yukon, Oklahoma, and we stay involved from the first call through the bore log, including work near Avenue F.

Is there rock near the surface in Del Rio?

The USDA soil survey maps bedrock within 60 inches in 6 percent of Del Rio, including hard bedrock in 4 percent and weathered bedrock in 2 percent. Salmon Peak Limestone is the mapped Cretaceous unit. That means some routes may meet rock within the top five feet, though the map does not establish conditions at a specific bore.

Who approves a Del Rio bore under US 90, and which TxDOT office reviews it?

TxDOT reviews a US 90 right of way permit through its Laredo District. The utility owner submits the application in RULIS, while we prepare the bore plan and profile. A line crossing under existing highway pavement is installed by boring or tunneling, with the permit setting the allowed project details.

What must we plan for when boring beneath Union Pacific track in Del Rio?

A crossing under Union Pacific track needs an agreement with the railroad before the route is set. The agreement establishes the crossing conditions, including casing, depth and flagging. Del Rio has 6.0 Union Pacific track miles, so the track location and the proposed bore alignment both matter.

Can a line be bored under San Felipe Creek in Del Rio?

A bore under San Felipe Creek can be planned, with the route set below the channel and checked for U.S. Army Corps of Engineers jurisdiction. The creek runs 4.77 channel miles within Del Rio, and its banks and depth affect where the bore pits and alignment can go.

Who runs Del Rio’s public water system, and what is its water source?

Del Rio Utilities Commission is the local government owner of the public water system. It serves 36,506 people through 20,234 connections, and its source is groundwater under the influence of surface water. A proposed connection near Avenue F still needs its specific line route and existing utilities checked.

Does Trinity cover Val Verde Park and rural sites outside Del Rio?

Yes. We take work across Texas, including Val Verde Park, 3.1 miles east of Del Rio, and rural sites beyond the city limits. The route and access for a job near Val Verde Park help determine crew logistics, while the exact address shows what utilities and crossings need to be considered.

How much notice does Texas811 need for a Del Rio bore near Avenue F?

For a bore near Avenue F, request a Texas811 locate at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. When a Del Rio start moves more than 14 days past the original notice, we make a new request to keep the schedule current. Worn or moved marks need refreshing through Texas811 before work continues.

What affects the cost of directional boring in Del Rio under US 90?

The job’s length and line size, Coahuila clay, pavement, utility crossings and pit work all affect the price. A US 90 route may require highway permitting details, while a San Felipe Creek crossing adds depth and planning considerations. Mobilization also reflects Del Rio’s 538 road miles from our Yukon yard.

Where the Del Rio facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Del Rio

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Del Rio, Texas

Type the address of your job in Del Rio. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Del Rio

Same county: Lake View · Box Canyon. All counties: Texas county list.