Edna Texas Directional Boring: Dacosta Clay, US 59 And Dry Creek
Quick Answer: We take directional boring, also called horizontal directional drilling (HDD), in Edna for routes crossing US 59, where Dacosta sandy clay loam can cling to the reamer. Edna is 500 road miles from our Yukon, Oklahoma main office, so a job beside the CPKC (Kansas City Southern) track includes a longer mobilization. At about 40 inches, USDA mapping shows clay across most of Edna, and that sticky material can grip pipe. Staged reaming and a same day pull help keep a Wells Street bore moving.
Edna bores at a glance
- County seat of Jackson County, Texas. Population 6,039 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 500 miles, about 10.1 hours of driving.
- Ground: Dacosta soil is mapped on 50 percent of the area, with clay about 40 inches down.
- Rock: no bedrock is mapped in the top 60 inches.
- Highways inside the boundary: US 59, US 59 Business, Texas State Highway 111, Loop 521 and FM 1822. State permit office: TxDOT Yoakum District.
- Railroad track inside the boundary: CPKC (Kansas City Southern), with 8 mapped street and rail crossings.
- Named streams inside the boundary: Dry Creek and Post Oak Branch.
- Public water: City of Edna, groundwater wells.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who can I call for directional boring near US 59 in Edna?
Dacosta sandy clay loam is mapped across much of Edna, so our crews plan the hole for sticky ground before setting a route. We take work in Edna, the Jackson County seat, whose population is 6,039 in the Census Bureau Vintage 2024 estimate. Along Wells Street or US 59, we install water, sewer, gas, electric conduit and fiber by matching the bore to the line and crossing.
Our main office is in Yukon, Oklahoma, and Edna work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Since 1982, four decades of directional boring have taught our family business how to manage sticky ground like the clay mapped around Dry Creek. We started in 1965, and that experience informs how we stage a ream and time the pipe pull in Edna.

What does the Dacosta soil survey show beneath Edna?
The USDA soil survey maps Dacosta sandy clay loam across 50% of Edna and Telferner fine sandy loam across 35%. Laewest clay accounts for 7%, while Fordtran loamy fine sand accounts for 4%. For Edna planning, we treat mapped soil patterns as reference information, not as test borings for a specific bore. At about 40 inches below the surface, the survey maps clay across 96% of the area and reports average clay content of 44%. That sticky layer can ball up on a reamer, swell around pipe and make a staged enlargement more suitable than rushing to full size.
| USDA soil survey, inside the Edna city limits | What is mapped |
|---|---|
| Soil series mapped | Dacosta 50 percent, Telferner 35 percent, Laewest 7 percent, Fordtran 4 percent and Edna 4 percent |
| Texture at the surface | sandy clay loam 50 percent, fine sandy loam 35 percent and clay 7 percent |
| Texture about 40 inches down | clay 96 percent and sandy clay 4 percent |
| Engineering class about 40 inches down | fat clay (CH) 100 percent |
| Average clay content about 40 inches down | 44 percent |
| Bedrock mapped within 60 inches | None mapped |
| Seasonal water table within 60 inches | 39 percent of the area |
| Flood prone soils | 0 percent of the area |
| High corrosion risk for uncoated steel | 96 percent of the area |
The USDA soil survey does not map bedrock in Edna’s top five feet, though that does not rule out deeper rock near Dry Creek. A seasonal water table is mapped within 60 inches across 39% of Edna, so pits in those areas may need pumping. The survey shows no flood prone soil areas within the city. Elevated steel corrosion risk is mapped across 96%, so line owners should consider casing and tracer wire materials; HDPE is unaffected by soil corrosion. The Pleistocene Beaumont Formation, areas predominantly sand, includes fine sand, silt and clayey channel fill, so ground may vary along a bore.
How do crews bore through Edna clay?
Edna’s clay can stick to a reamer and grip pipe, while sandy layers may not stay open as long. We adjust the fluid and reaming sequence to the mapped ground along each route.
- Fluid and reaming: Edna’s heavy clay can cling to the reamer, so we use a thinner drilling fluid with polymer and enlarge the hole in stages.
- Pipe timing: Near Dry Creek, we have pipe laid out before the final ream and pull it the same day, limiting time for sticky clay to grip it.
- Pressure control: Where US 59 pavement sits above heavy clay, we watch fluid returns and keep pressure controlled to avoid lifting the surface.
- Pit and tracking: In Edna areas with a seasonal water table, we keep pits small and pump as needed; a walkover locator tracks depth and pitch.

What does a bore have to cross in Edna near CPKC (Kansas City Southern)?
US 59 and US 59 Business run through Edna, alongside Texas State Highway 111, Loop 521, FM 1822, FM 822 and FM 82. A utility route under existing highway pavement is bored or tunneled rather than open cut. Main Street is the longest named street in the city at 2.41 miles, followed by Wells Street at 2.33 miles and East Street at 2.25 miles. Cedar Street adds another 1.52 miles of named roadway where a route may need to pass under pavement without cutting it.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| US 59 | US highway | 7.3 roadway miles inside | State highway office |
| US 59 Business | US highway | 2.4 roadway miles inside | State highway office |
| Texas State Highway 111 | State highway | 4.7 roadway miles inside | State highway office |
| Loop 521 | State highway | 2.4 roadway miles inside | State highway office |
| FM 1822 | State highway | 1.4 roadway miles inside | State highway office |
| FM 822 | State highway | 0.9 roadway miles inside | State highway office |
| FM 82 | State highway | 0.2 roadway miles inside | State highway office |
| CPKC (Kansas City Southern) | Railroad | 2.38 track miles inside | The railroad |
| Dry Creek | Stream | 2.73 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Post Oak Branch | Stream | 1.74 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Lavaca River | Stream nearby | 1 miles outside | Checked for Corps of Engineers jurisdiction |
The CPKC (Kansas City Southern) Rosenberg Subdivision has 2.38 track miles in Edna, and public mapping shows 8 street and rail crossings. Any route beneath that track needs an agreement with the railroad owner, which sets crossing conditions. Dry Creek runs 2.73 channel miles in the city and Post Oak Branch runs 1.74 miles; mapped streets cross named streams at 21 points. The Lavaca River is 1.0 mile from the city limits, so a route there needs a separate crossing review.
Who signs off on a bore in Jackson County in Edna?
Edna is incorporated, so its city streets, including Main Street and Wells Street, belong to the city. For work on US 59, US 59 Business, Texas State Highway 111, Loop 521 or an FM road right of way, the line owner files the utility permit through TxDOT’s online RULIS system. TxDOT’s Yoakum District reviews it, and we give the owner a bore plan and profile for its application. At highway crossings, electric and communication lines need 60 inches of cover below the lowest grade point; water lines need 60 inches and pressurized sewer lines need 60 inches. A CPKC track crossing also needs the railroad owner’s agreement. Dry Creek and Post Oak Branch are checked for U.S. Army Corps of Engineers jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Which utilities serve Edna near the City of Edna water system?
The City of Edna public water system uses groundwater wells and serves 5,987 people through 2,599 service connections. That helps identify the local water system, but a proposed service route near Main Street still needs its line owner confirmed. Electric utilities reporting service in Jackson County are AEP Texas Central, Guadalupe Valley Electric Cooperative, Jackson Electric Cooperative, Victoria Electric Cooperative and Wharton County Electric Cooperative. We confirm the owner for the specific address before planning an electric conduit bore, since those reports do not identify the provider at every Edna property.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of Edna | Public water system | Groundwater wells | 2,599 connections, 5,987 people served |
| AEP Texas Central, Guadalupe Valley Electric Cooperative, Jackson Electric Cooperative, Victoria Electric Cooperative and Wharton County Electric Cooperative | Electric utilities reporting service in Jackson County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put Edna’s median housing year at 1972; 34% of homes were built before 1960, 49% from 1960 to 1999 and 17% in 2000 or later. A replacement line along East Street may need to meet older buried services, while a new connection near Wells Street may have a different route. We hydrovac pothole every marked utility on the planned path before drilling near it, because surface marks do not show depth.

What places are near Edna and Victoria?
Edna is the county seat of Jackson County, covers 4.13 square miles and sits at an elevation of 63 feet. We use ZIP code 77957 when identifying service coverage for boring work in Edna. Ganado is 9.5 miles northeast, Vanderbilt is 10.9 miles south, Inez is 11.0 miles southwest, Lolita is 11.9 miles southeast and La Ward is 14.2 miles southeast. Victoria, the nearest larger city, is 22.8 miles southwest. Edna is 500 road miles and a 10.1 hour drive from our Yukon, Oklahoma main office, which affects mobilization for work near US 59.
Places near Edna
- Directional boring in Ganado: 9.5 miles northeast
- Directional boring in Vanderbilt: 10.9 miles south
- Directional boring in Inez: 11 miles southwest
- Directional boring in Lolita: 11.9 miles southeast
- Directional boring in La Ward: 14.2 miles southeast
- Directional boring in Victoria: 22.8 miles southwest
What kinds of bores come up near Wells Street in Edna?
- Highway crossing: A bore beneath US 59 or Texas State Highway 111 keeps the route below the pavement instead of cutting across the travel lanes.
- Street service: A water or sewer connection under Wells Street can pass beneath the roadway, with marked utilities exposed before the drill approaches.
- Fiber conduit: A fiber route near Main Street can use a bore to cross paved frontage without an open cut across the street.
- Creek crossing: A route under Dry Creek needs depth planning and a check for U.S. Army Corps of Engineers jurisdiction.
- Rail crossing: A utility beneath the CPKC (Kansas City Southern) Rosenberg Subdivision needs the railroad owner’s agreement before the crossing is planned.
- Water service: A connection near the City of Edna system can be routed from groundwater well service toward a property after the line owner and existing utilities are confirmed.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What drives the price of a bore near Cedar Street in Edna?
For a Cedar Street quote, start with the address or a map pin, then tell us what will go in the ground. For Edna boring plans, we specify the pipe or conduit size and footage. A sketch or plans help us see how the route meets pavement, such as a crossing near US 59, and what access the job needs.
Price depends on the route and job details. Edna is 500 road miles from Yukon, so mobilization matters. Dacosta sandy clay loam can affect drilling time and fluid needs. A crossing under US 59 or the CPKC track adds coordination and crossing work. The count of marked utilities to expose, pavement or concrete, creek drainage, pits, excavator time and sand backfill also affect the scope. High profile or emergency work can require a different plan.
Questions people ask about boring in Edna
Does Trinity Boring Solutions take directional boring jobs in Jackson County, Edna, and how are crews assigned?
Yes. We take directional boring work in Edna and across Texas, including routes in Jackson County. Our own crews handle projects, and partner contractor satellite yards can support work as needed. You work with Trinity from the first call through the bore log, regardless of which crew is on site near US 59.
Who owns electric lines in Jackson County, Edna, and who confirms conduit specifications?
Electric utilities reporting service in Jackson County include AEP Texas Central, Guadalupe Valley Electric Cooperative, Jackson Electric Cooperative, Victoria Electric Cooperative and Wharton County Electric Cooperative. Those reports do not establish which provider serves a particular address near Wells Street. We confirm the line owner for that location, and the owner confirms conduit specifications before a bore is planned.
Who is in charge of East Street in Edna, and does a utility bore need a street cut?
East Street is a city street because Edna is incorporated. A directional bore can pass beneath its pavement without an open cut through the roadway. We locate and expose marked utilities along the planned path first, then use the bore plan to set the crossing route and depth.
How do older homes near Wells Street in Edna affect replacement bores?
The American Community Survey 2019 to 2023 estimates put Edna’s median housing year at 1972, with 34% of homes built before 1960. A replacement bore near Wells Street may need to work around existing buried lines, while a new service can follow a different path. Before drilling near marked utilities in Edna, we expose them to verify their locations.
Can groundwater or flood prone ground affect bore pits near Dry Creek in Edna?
Groundwater can affect pits in some parts of Edna: a seasonal water table within 60 inches is mapped across 39% of the city. The soil survey shows no flood prone soil areas in Edna. Near Dry Creek, we assess the specific route and can use small pits and pumping where wet ground calls for it.
Does Dacosta soil in Edna corrode steel, and what pipe can a bore use?
The USDA soil survey maps elevated steel corrosion risk across 96% of Edna, including much of the Dacosta sandy clay loam. The line owner should consider that risk when selecting steel casing or tracer wire materials. HDPE is not affected by soil corrosion, and the owner chooses any needed coatings for steel.
Does Trinity cover Ganado and rural sites outside Edna?
Yes. We take work in Ganado, 9.5 miles northeast of Edna, and at rural sites beyond the city limits. A route outside Edna may involve different access, soil or creek conditions, so we use the address or map pin and the planned line details to scope the bore.
How much Texas811 notice is needed for a bore near Main Street in Edna?
For a bore near Main Street, request a Texas811 locate at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays. The request cannot be made more than 14 days early; if the planned start slips more than 14 days, make a new request. If marks are worn or moved in Edna, we request refreshed markings through Texas811 before our work continues.
What affects the cost of directional boring near US 59 in Edna?
The job scope drives the price for a US 59 bore in Edna. Mobilization reflects the 500 road miles from Yukon, while Dacosta clay, pipe or conduit size and bore length affect the drilling work. The number of utilities to expose, highway or CPKC crossings, pavement, creek drainage, pits and excavator time also matter.
Where the Edna facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Edna
- U.S. Census Bureau, TIGER/Line 2024: Edna boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Edna
- U.S. Census Bureau, American Community Survey 2019 to 2023: Edna housing units and year built
- Macrostrat geologic map compilation: map units under Edna
- U.S. EPA Safe Drinking Water Information System: public water systems serving Edna
- U.S. Department of Transportation, North American Rail Network: track owners in Jackson County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Jackson County
- U.S. Geological Survey, Elevation Point Query Service: Edna elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Edna
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Edna
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Edna, Texas
Type the address of your job in Edna. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Edna
All counties: Texas county list.
