trinityboringsolutions.com

Amargosa Texas Directional Boring: Parrita Sandy Clay Loam, US 281 Bypass and Amargosa Creek

Quick Answer: Need a line beneath US 281 Bypass without cutting the pavement? We do directional boring, also called horizontal directional drilling (HDD), for crossings near Amargosa. The mapped boundary is 583 road miles from our Yukon, Oklahoma main office, with Amargosa Creek nearby to plan around. Parrita sandy clay loam is common here, so the hole needs a plan for ground that can hold together and cling to pipe.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Amargosa bores at a glance

  • Unincorporated community in Jim Wells County, Texas. Population 305 (2020 Census count).
  • Road distance from our Yukon, Oklahoma main office: 583 miles, about 11.4 hours of driving.
  • Ground: Parrita soil is mapped on 39 percent of the area, with loam about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • No state or US highway is mapped inside the boundary. Closest: US 281 Bypass and US 281.
  • Railroad track inside the boundary: none mapped.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who can I call for directional boring near US 281 Bypass in Amargosa?

Need a line beneath US 281 Bypass without cutting the pavement? Trinity Boring Solutions takes directional boring work in Amargosa and across Texas. The Census Bureau counted 305 people here in 2020; it does not publish yearly estimates for this unincorporated place. We install water, sewer, gas, electric conduit and fiber for routes along Amargosa’s public roads and toward nearby services.

Our main office is in Yukon, Oklahoma, and Amargosa work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore ran about 4,100 feet under the Arkansas River in Tulsa, so a typical Amargosa line near US 281 Bypass is a shorter, local route by comparison. Our family business began in 1965, and we have done directional boring since 1982, planning Amargosa work around Jim Wells County conditions.

Trinity Boring Solutions branded compact directional drilling unit positioned beside a tree on a red dirt jobsite
Our compact directional drill set up beside a tree on a tight site. Photos on this page are from our jobs in Oklahoma and Texas.

What does the USDA soil survey show about Parrita soil in Amargosa?

The USDA soil survey maps Parrita sandy clay loam, 0 to 3 percent slopes, across 39 percent of Amargosa. Olmedo very gravelly fine sandy loam covers 25 percent, Clareville loam covers 20 percent, and Pernitas sandy clay loam covers 11 percent. At about 40 inches below the surface, the survey maps loam under 39 percent of the area and cemented material under 26 percent. Clay loam accounts for 20 percent at that depth, while average clay content is 24 percent. We use mapped Parrita and Olmedo soil patterns to guide boring plans, not as substitutes for test borings in Amargosa.

USDA soil survey, inside the Amargosa mapped community boundaryWhat is mapped
Soil series mappedParrita 39 percent, Olmedo 25 percent, Clareville 20 percent and Pernitas 14 percent
Texture at the surfacesandy clay loam 54 percent, very gravelly fine sandy loam 25 percent and loam 20 percent
Texture about 40 inches downloam 39 percent, cemented material 26 percent and clay loam 20 percent
Engineering class about 40 inches downsilty clay (CL ML) 39 percent, fat clay (CH) 20 percent and lean clay (CL) 14 percent
Average clay content about 40 inches down24 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches0 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel0 percent of the area

The USDA soil survey maps no bedrock in Amargosa’s top five feet, but that does not rule out deeper rock. Seasonal water table, flood prone soils and high steel corrosion risk are not mapped here, which may simplify pit and material planning but does not replace checking the actual bore route. The geologic map identifies the Lissie Formation, Pleistocene, and Alluvium, Chibanian. With loam and clay loam mapped at depth, crews should manage fluid so the hole stays stable without washing soft ground.

How do crews handle loam and clay in Amargosa?

The USDA survey maps loam and clay loam about 40 inches down in Amargosa. That calls for controlled drilling fluid and a bore plan shaped around the specific route, not assumptions from the map.

  1. Parrita sandy clay loam covers 39 percent of Amargosa, so crews can use staged reaming and manage fluid to limit sticky cuttings around the reamer.
  2. Loam is mapped at about 40 inches under 39 percent of Amargosa; soft ground needs restrained fluid pressure, especially near paved approaches to US 281.
  3. Olmedo very gravelly fine sandy loam covers 25 percent of the mapped area, so crews track depth and pitch as the drill advances through changing ground.
  4. Amargosa Creek lies 0.2 miles from the mapped boundary; a crossing plan keeps the bore under the channel and checks jurisdiction before work is laid out.
Bore pit with a 6 inch PVC sleeve, traffic cones and blue water line flags at NE 24th Street in Oklahoma City
A bore pit with a 6 inch PVC sleeve, traffic cones and blue water line flags at NE 24th Street in Oklahoma City.

Where might a line have to go under US 281 Bypass in Amargosa?

No highway is mapped inside Amargosa’s boundary. US 281 Bypass is 0.6 miles from the boundary, and US 281 is 0.7 miles away, so a crossing may involve state right of way rather than a road inside the community. There are no named streets listed for this place, though public road centerlines total 7.86 miles. For a route approaching either US highway, the actual alignment and road owner matter before setting bore pits or depth.

CrossingTypeMapped extentWho has a say
US 281 BypassHighway nearby0.6 miles outsideState highway office
US 281Highway nearby0.7 miles outsideState highway office
Amargosa CreekStream nearby0.2 miles outsideChecked for Corps of Engineers jurisdiction
Chiltipin CreekStream nearby0.3 miles outsideChecked for Corps of Engineers jurisdiction
El Caro CreekStream nearby0.7 miles outsideChecked for Corps of Engineers jurisdiction
Javalina CreekStream nearby1 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Amargosa or within one mile outside the boundary, so a rail crossing is not indicated by these records. Amargosa Creek is 0.2 miles from the boundary, with Chiltipin Creek 0.3 miles away; El Caro Creek and Javalina Creek are also nearby. The mapped community has 0.91 miles of unnamed drainage. No street crossing of a named stream is mapped inside the boundary, and a creek route still needs jurisdiction checked during planning.

Who approves a bore near Amargosa in Jim Wells County?

US 281 Bypass and US 281 are state highways near Amargosa, so work in their right of way needs a TxDOT utility permit reviewed by the Corpus Christi District. The utility owner, not our drilling crew, submits through TxDOT’s online RULIS system; we prepare the bore plan and profile for that filing. Beneath existing highway pavement, the crossing is bored or tunneled, and the required cover depends on line type and the permit. Amargosa has no city government, so county roads and access must be handled with the county. A creek crossing near Amargosa Creek is checked for federal water jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Whose lines are buried in Jim Wells County near Amargosa?

EPA drinking water records do not identify the provider for a specific Amargosa address, and no system name matches the place. Confirm the water provider with the county or local water district before planning a bore. AEP Texas Central, Nueces Electric Cooperative and San Patricio Electric Cooperative report electric service in Jim Wells County, but that does not establish which one serves a given address. Confirm the line owner before laying out an electric conduit route near US 281.

Line ownerWhat it isSourceSize
AEP Texas Central, Nueces Electric Cooperative and San Patricio Electric CooperativeElectric utilities reporting service in Jim Wells CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 estimates 145 housing units in Amargosa, with a median year built of 2005; 86 percent were built in 2000 or later and 14 percent from 1960 to 1999. That mix points to both new service routes and possible replacements, depending on the address. Before a drill nears a marked line along an Amargosa road, we hydrovac pothole each marked utility on the bore path because paint shows position, not depth.

Large HDPE conduit reels staged on a Rotate A Reel trailer for a fiber and utility installation in Oklahoma
HDPE conduit reels on a reel trailer for a fiber and utility installation in Oklahoma.

Where is Amargosa in relation to Alfred and Alice?

Amargosa is an unincorporated census designated place in Jim Wells County, at an elevation of 299 feet and covering 1.34 square miles. ZIP code 78332 serves the area. Owl Ranch is 0.9 miles east, Alfred is 8.0 miles east, and South La Paloma is 8.6 miles east. Alice, the county seat and nearest larger city, is 9.8 miles south. From our Yukon yard, the drive is 583 road miles and 11.4 hours, which can affect mobilization for a bore near Amargosa Creek.

Places near Amargosa

What boring work comes up near Amargosa Creek?

  • Highway crossing: A bore approaching US 281 Bypass stays beneath existing pavement, with the route and right of way planned for TxDOT review.
  • Water service: A line serving an Amargosa address needs the water provider confirmed before we plan the route from the public road.
  • Fiber conduit: A conduit route near US 281 can pass below pavement without an open cut, with marked utilities exposed before drilling near them.
  • Creek crossing: A route near Amargosa Creek is planned to pass below the channel, with jurisdiction checked during crossing planning.
  • Drainage bore: The 0.91 miles of unnamed drainage mapped inside Amargosa calls for pit placement and alignment that avoid cutting the drainage path.
  • Electric conduit: A route near Owl Ranch can be scoped after the address line owner is confirmed among utilities reporting service in Jim Wells County.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What should I send for an Amargosa Creek bore quote?

For a quote near Amargosa Creek, send the address or map pin, what will go in the ground, pipe or conduit size and footage; a sketch or plans help. The route matters here because the nearby US 281 Bypass, mapped drainage and local soil can change where pits fit and how the bore is built.

Parrita sandy clay loam and the loam mapped at depth matter first because they shape drilling fluid, reaming and pipe pullback. A route toward US 281 Bypass adds highway access, cover and permit needs. Creek or drainage crossings can add planning, while pavement, exposed utilities, pit space and excavator time affect the work. Our mobilization schedule accounts for 583 road miles from the Yukon main office to Amargosa. Emergency timing or a high profile route can change the scope.

Questions people ask about boring in Amargosa

Does Trinity take directional boring jobs in Amargosa, Jim Wells County, and how are crews assigned?

Yes. Trinity takes work in Amargosa, and the job is completed by our own crews or from a satellite yard operated by a partner drilling contractor we have vetted. From the first call through the bore log, we work with you to plan Amargosa crossings near Amargosa Creek. That arrangement applies whether the route is near Owl Ranch or elsewhere in Jim Wells County.

Who approves a bore under US 281 Bypass near Amargosa?

TxDOT reviews a utility permit for work in the US 281 Bypass right of way through its Corpus Christi District. The utility owner files in RULIS, while we prepare the bore plan and profile. A route under existing highway pavement is bored or tunneled, and the permit sets the required details for that crossing.

Can you bore a line under Amargosa Creek near Amargosa?

A bore can be planned beneath Amargosa Creek, which is 0.2 miles from the mapped community boundary. The route has to be checked for water jurisdiction during planning, and the bore depth and pit locations depend on the channel and actual ground. Nearby Chiltipin Creek may also affect a route in that direction.

Who owns electric lines in Amargosa, Jim Wells County, and who confirms conduit specs?

AEP Texas Central, Nueces Electric Cooperative and San Patricio Electric Cooperative report service in Jim Wells County, but those records do not identify the provider for every Amargosa address. Confirm the specific line owner and conduit requirements before planning the bore. That keeps the route tied to the actual electric system rather than a countywide assumption.

Who is responsible for Amargosa streets in Jim Wells County, and must a road be cut?

Amargosa is unincorporated, so it has no city government; a road inside the community is handled by the county or state depending on ownership. A line can often be installed beneath a road without cutting the surface. US 281 Bypass is outside the mapped boundary, and TxDOT rules apply if work enters its right of way.

How old are homes and buried lines in Amargosa, Jim Wells County, and what does that mean for a replacement bore?

The American Community Survey estimates a median housing year of 2005 in Amargosa, with 86 percent of units built in 2000 or later. Housing age alone does not establish buried line age, so a replacement route needs utility locating and potholing. Near US 281, that check also helps plan a safe approach to pavement.

Does Trinity cover Owl Ranch and rural sites outside Amargosa?

Yes. We take work around Owl Ranch, 0.9 miles east of Amargosa, and at rural sites beyond the mapped boundary. The exact route, access and distance from our Yukon office affect mobilization. A map pin helps us see whether the work approaches Amargosa Creek, US 281 or another local feature.

How much notice does Texas811 need for an Amargosa bore in Jim Wells County, and what if marks change?

Texas811 needs a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days beforehand. If a planned start slips more than 14 days past the original notice, submit a new request. Refresh worn or moved marks through Texas811 before work continues near an Amargosa road.

What affects the cost of directional boring near US 281 Bypass in Amargosa?

The route and job scope drive the price, not one standard rate. Parrita soil affects drilling and reaming; US 281 Bypass can add right of way and permit coordination. Pipe size, bore length, utility crossings, pavement, creek or drainage work, pits and excavator time all matter. Mobilization from Yukon is another job specific factor.

Where the Amargosa facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Amargosa

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Amargosa, Texas

Type the address of your job in Amargosa. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Amargosa

Same county: Premont · Rancho Alegre · Orange Grove · San Diego · Coyote Acres · Alice Acres · Sandia · K-Bar Ranch · Loma Linda East · Ben Bolt. All counties: Texas county list.