Hemphill Texas Directional Boring: Moswell Loam, Clay Subsoil And Travis Branch
Quick Answer: Moswell loam covers Hemphill, where Trinity Boring Solutions uses directional boring, also called horizontal directional drilling (HDD), to route lines beneath Sabine Street. The Yukon, Oklahoma main office is 447 road miles away, so a bore near Texas State Highway 87 has a longer mobilization to plan. Clay makes up 76 percent of mapped soil at about 40 inches and can stick to the reamer. We adjust fluid and reaming around that clay before pulling pipe.
Hemphill bores at a glance
- County seat of Sabine County, Texas. Population 1,039 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 447 miles, about 8.9 hours of driving.
- Ground: Moswell soil is mapped on 69 percent of the area, with clay about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 72 percent of the area.
- Highways inside the boundary: Texas State Highway 87, Texas State Highway 184, FM 1175, FM 83 and FM 2971. State permit office: TxDOT Lufkin District.
- Railroad track inside the boundary: none mapped.
- Named streams inside the boundary: Travis Branch, Dry Branch and Jack Creek.
- Public water: City of Hemphill, surface water.
- Electric: City of Hemphill municipal electric system.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who handles directional boring in Hemphill near Travis Branch?
Hemphill’s Moswell loam can grip the reamer, and Trinity Boring Solutions takes directional boring work across Sabine County. The Census Bureau Vintage 2024 estimate puts the city at 1,039 residents. For routes along Worth Street or Texas State Highway 87, we install water, sewer, gas, electric conduit and fiber to connect homes and services without opening every surface.
Our main office is in Yukon, Oklahoma, and Hemphill work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We are a family business that started in 1965, with directional boring since 1982. Our work ranges from 3/4 inch service lines to 48 inch casing, a fit for the varied routes around Sabine Street and Travis Branch.

How does Moswell soil affect drilling in Hemphill?
The USDA soil survey maps Moswell soil across 69 percent of Hemphill, mostly as loam on slopes from 1 to 15 percent. At about 40 inches below the surface, clay is mapped across 76 percent of the area, with sandy clay loam across 23 percent. With Moswell among Hemphill’s soil series, the average clay content at that depth is 55 percent, which we consider in underground planning. This is mapped ground, not a record of a test bore. Sticky clay can ball up on a reamer or swell around pipe, so the drilling plan needs to account for the soil below the loam.
| USDA soil survey, inside the Hemphill city limits | What is mapped |
|---|---|
| Soil series mapped | Moswell 69 percent, Kurth 15 percent, Sawlit 8 percent, Mattex 4 percent and Herty 3 percent |
| Texture at the surface | loam 76 percent and fine sandy loam 24 percent |
| Texture about 40 inches down | clay 76 percent and sandy clay loam 23 percent |
| Engineering class about 40 inches down | fat clay (CH) 72 percent, clayey sand (SC) 15 percent and lean clay (CL) 13 percent |
| Average clay content about 40 inches down | 55 percent |
| Bedrock mapped within 60 inches | 72 percent of the area (0 percent hard rock, 72 percent weathered rock) |
| Seasonal water table within 60 inches | 31 percent of the area |
| Flood prone soils | 4 percent of the area |
| High corrosion risk for uncoated steel | 100 percent of the area |
Weathered bedrock is mapped within 60 inches across 72 percent of Hemphill, with typical depth at 52 inches; that can slow a bore where the drill reaches it. A seasonal water table is mapped within 60 inches across 31 percent, so pits may need pumping. Flood prone soils cover 4 percent, including ground to consider near Travis Branch. High steel corrosion risk covers 100 percent. The Eocene Yegua Formation includes clay and minor sandstone beds, which can change drilling conditions along a route.
How do crews bore Hemphill clay without opening streets?
In Hemphill, Moswell clay and the deeper clay mapped at about 40 inches call for measured fluid and staged reaming. We track the drill head from the surface and log its depth and pitch as it advances.
- Moswell loam covers much of Hemphill, but clay dominates at about 40 inches; we use fluid suited to sticky ground and ream in stages.
- Because clay can swell around pipe, we prepare the pipe before the final ream and pull it while the bore remains open.
- Near Travis Branch, we plan depth with the channel in mind and check the crossing for U.S. Army Corps of Engineers jurisdiction during planning.
- On a bore beneath Sabine Street, we hydrovac pothole marked utilities on the path before drilling near them; paint shows position, not depth.

Which roads, tracks or creeks shape bores in Hemphill near Sabine Street?
Texas State Highway 87 has 5.0 mapped roadway miles inside Hemphill, and Texas State Highway 184 has 1.2. FM 1175 and FM 83 each have 0.8 mapped roadway miles, while FM 2971 has 0.1. Among named streets, Sabine Street runs 1.39 miles, Worth Street 1.38 miles and Starr Street 1.03 miles inside the city. Boring beneath these routes can avoid cutting pavement, but the exact crossing and access points shape the plan.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| Texas State Highway 87 | State highway | 5 roadway miles inside | State highway office |
| Texas State Highway 184 | State highway | 1.2 roadway miles inside | State highway office |
| FM 1175 | State highway | 0.8 roadway miles inside | State highway office |
| FM 83 | State highway | 0.8 roadway miles inside | State highway office |
| FM 2971 | State highway | 0.1 roadway miles inside | State highway office |
| Travis Branch | Stream | 1.06 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Dry Branch | Stream | 0.64 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Jack Creek | Stream | 0.37 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Beef Creek | Stream nearby | Along the boundary | Checked for Corps of Engineers jurisdiction |
| Nichols Creek | Stream nearby | 0.1 miles outside | Checked for Corps of Engineers jurisdiction |
| Jacks Creek | Stream nearby | 0.3 miles outside | Checked for Corps of Engineers jurisdiction |
| Nickols Creek | Stream nearby | 0.5 miles outside | Checked for Corps of Engineers jurisdiction |
No railroad or street and rail crossing is mapped inside Hemphill, so there is no local track route identified in these records. Travis Branch runs 1.06 channel miles in the city, Dry Branch 0.64 and Jack Creek 0.37. Six mapped street crossings of named streams make creek and drainage locations relevant to routes near Mann Street. With Travis Branch inside Hemphill limits, no lakes or ponds are mapped within one mile, and we plan crossings accordingly.
Do I need a permit to bore in Hemphill and Sabine County?
Hemphill street bores fall under the city, while work in the right of way of Texas State Highway 87, Texas State Highway 184 or an FM road needs a TxDOT utility permit. The TxDOT Lufkin District reviews it, and the utility owner submits the application through RULIS; we prepare the bore plan and profile for that filing. TxDOT requires boring or tunneling beneath existing highway pavement, with rural highway crossings extending under all travel lanes. A route near Travis Branch is checked during planning for U.S. Army Corps of Engineers jurisdiction. No railroad is mapped in the city.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
What is already in the ground in Hemphill near City of Hemphill?
The City of Hemphill owns the public water system, which uses surface water and reports 4,316 service connections serving 1,779 people. The city also owns its municipal electric system, with 791 customers reported to the EIA. Deep East Texas Electric Cooperative and Jasper-Newton Electric Cooperative report electric service in Sabine County. Before planning an electric conduit bore near Sabine Street, we confirm the line owner for the route.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of Hemphill | Public water system | Surface water | 4,316 connections, 1,779 people served |
| City of Hemphill municipal electric system | City owned electric system | Reports to the U.S. Energy Information Administration | 791 customers reported |
| Deep East Texas Electric Cooperative and Jasper-Newton Electric Cooperative | Electric utilities reporting service in Sabine County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put Hemphill’s median housing year at 1974; 23 percent of homes were built before 1960, 68 percent from 1960 to 1999 and 9 percent in 2000 or later. Older housing can mean replacement lines as well as new services along Worth Street. We hydrovac pothole each marked utility on the bore path before drilling near it, since surface marks do not show depth.

How far is Hemphill from Jasper and our Yukon yard?
Hemphill is the county seat of Sabine County, at elevation 261 feet, and covers 2.54 square miles. For underground work along Italy Road, ZIP code 75948 serves Hemphill and helps us identify the correct service area. Milam is 8.3 miles northeast, and Pineland is 9.8 miles southwest; Jasper, the nearest larger city, is 30.2 miles south. The Yukon, Oklahoma yard is 447 road miles away, a drive of 8.9 hours. That distance is one part of planning a bore near Texas State Highway 87.
Places near Hemphill
- Directional boring in Milam: 8.3 miles northeast
- Directional boring in Pineland: 9.8 miles southwest
- Directional boring in Browndell: 16.9 miles southwest
- Directional boring in South Toledo Bend: 19.3 miles southeast
- Directional boring in San Augustine: 20 miles northwest
- Directional boring in Jasper: 30.2 miles south
What boring work comes up in Hemphill near Worth Street?
- Highway crossing: A bore beneath Texas State Highway 87 needs a route and profile for the TxDOT permit, with pavement left uncut.
- Water service: A new or replacement connection near Worth Street can use a bore to pass beneath the road surface.
- Fiber conduit: A route along Sabine Street can carry conduit without an open cut across pavement.
- Creek crossing: A route near Travis Branch needs planned depth below the channel and a jurisdiction check during planning.
- Electric conduit: A bore near Starr Street starts with confirming the line owner and exposing marked utilities on the path.
- Water main work: A connection to the City of Hemphill system needs a planned route that accounts for existing services.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What drives the price of a Hemphill bore near Texas State Highway 87?
For a bore near Texas State Highway 87, send the address or map pin, what is going in the ground, the pipe or conduit size and the footage; a sketch or plans help. For a route near Travis Branch, a drawing can also show creek banks, access and the intended crossing points. Those details help us scope the bore before the crew is scheduled.
Price follows the work at the specific Hemphill route. Moswell clay and weathered bedrock can affect drilling time; crossings of Texas State Highway 87, Sabine Street or a creek can add planning and exposure work. Pipe size, bore length, pits, pavement and any utilities that must be exposed also matter. The 447 road miles from Yukon affect mobilization, while emergency timing or a high profile route can change the plan.
Questions people ask about boring in Hemphill
Does Trinity Boring Solutions take Hemphill jobs in Sabine County, and who staffs them?
Yes, we take directional boring work in Hemphill and across Texas. Our own crews and partner drilling contractors Trinity has personally vetted handle the work from satellite yards, while our Yukon office remains the main office. You work with Trinity from the first call through the bore log, even when a partner crew is on site near Sabine Street.
At FM 83 in Hemphill, who runs the public water system, and what is its water source?
The City of Hemphill owns the public water system, and its source is surface water. The system reports 4,316 service connections serving 1,779 people. For a new service near Worth Street, the route still needs to account for existing water lines and other marked utilities.
Who owns electric lines in Hemphill and Sabine County, and who confirms conduit specs?
The City of Hemphill owns its municipal electric system, while Deep East Texas Electric Cooperative and Jasper-Newton Electric Cooperative report service in Sabine County. We confirm the line owner and applicable conduit specifications for the specific route before planning a bore, such as one near Texas State Highway 87.
Do Hemphill city streets such as Starr Street need to be cut for a bore?
As an incorporated city in Sabine County, Hemphill owns its city streets, so we plan underground work through the city street jurisdiction. A directional bore can pass beneath Starr Street without an open cut through the pavement. We still plan pits and access points and expose marked utilities along the bore path before drilling near them.
What do Hemphill homes near Worth Street suggest about replacement bores?
Hemphill’s median housing year is 1974, and 23 percent of homes were built before 1960, according to the American Community Survey 2019 to 2023 five year estimates. That age mix can mean both replacement lines and new service connections near Worth Street. The route and existing utilities need checking before drilling.
Could Hemphill groundwater or flood prone ground near Travis Branch affect bore pits?
It could. The USDA soil survey maps a seasonal water table within 60 inches across 31 percent of Hemphill and flood prone soils across 4 percent. Near Travis Branch, we plan pit locations with wet ground and the channel in mind; pits can need pumping when water collects.
What bore sizes and lengths can Trinity handle for a Hemphill job near Mann Street?
On Texas State Highway 184 crossings in Hemphill, we handle lines from 3/4 inch service lines up to 48 inch casing, with bore lengths from 10 feet to 5,000 feet. A route near Mann Street is scoped around the pipe size, footage, ground and crossings, rather than choosing equipment from length alone.
How early should I call Texas811 for a Hemphill bore near Sabine Street?
Count back at least 48 hours from the planned start, excluding Saturdays, Sundays and legal holidays; Texas811 describes this as two working days. Do not request the locate earlier than 14 days before work. If the start slips more than 14 days past the original notice, request a new ticket, and have worn or moved marks refreshed through Texas811 before work continues.
What affects the cost of a Hemphill directional bore near Texas State Highway 87?
The route, length, pipe or conduit size, soil, crossings, pavement, pits and access all affect the price. Moswell clay can change drilling conditions, a crossing of Texas State Highway 87 can add permit and planning work, and the 447 road miles from Yukon affect mobilization. Emergency timing and utilities that need exposure also shape the scope.
Where the Hemphill facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Hemphill
- U.S. Census Bureau, TIGER/Line 2024: Hemphill boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Hemphill
- U.S. Census Bureau, American Community Survey 2019 to 2023: Hemphill housing units and year built
- Macrostrat geologic map compilation: map units under Hemphill
- U.S. EPA Safe Drinking Water Information System: public water systems serving Hemphill
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Sabine County
- U.S. Geological Survey, Elevation Point Query Service: Hemphill elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Hemphill
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Hemphill
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Hemphill, Texas
Type the address of your job in Hemphill. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Hemphill
All counties: Texas county list.
