trinityboringsolutions.com

Milam Texas Directional Boring: Gallime Soil, Texas State Highway 87 and Wilson Branch

Quick Answer: We do directional boring, also called horizontal directional drilling (HDD), in Milam for routes beneath Texas State Highway 87 and its local roads. Forest Road 110, Driggers Road and Cedar Grove Road are among 201 named streets across 138.75 public road miles, and Texas State Highway 87 runs through the community. Milam is 449 road miles from our Yukon, Oklahoma main office, near Wilson Branch. Gallime soil and clay at about 40 inches can grip a pipe, so we plan staged reaming and a timely pull.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Milam bores at a glance

  • Unincorporated community in Sabine County, Texas. Population 1,355 (2020 Census count).
  • Road distance from our Yukon, Oklahoma main office: 449 miles, about 8.9 hours of driving.
  • Ground: Gallime soil is mapped on 13 percent of the area, with sandy clay loam about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 11 percent of the area.
  • Highways inside the boundary: Texas State Highway 87, Texas State Highway 21, FM 242 and FM 3121. State permit office: TxDOT Lufkin District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Wilson Branch, Corsey Creek, Beaver Creek and Allen Creek.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who does directional boring near Forest Road 110 in Milam?

We take directional boring work in Milam, where Forest Road 110, Driggers Road and Cedar Grove Road lead among 201 named streets across 138.75 public road miles, with Texas State Highway 87 running through the community. Milam is in Sabine County and had 1,355 residents in the 2020 Census count. We install water, sewer, gas, electric conduit and fiber beneath local roads and driveways, with the route set by the specific project.

Our main office is in Yukon, Oklahoma, and Milam work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We started directional boring in 1982, bringing four decades of practice to the Gallime and clay soils mapped around Milam. Our family business dates to 1965, and we have had no utility strike in over 25 years.

Trinity Boring Solutions branded compact directional drilling unit positioned beside a tree on a red dirt jobsite
Our compact directional drill set up beside a tree on a tight site. Photos on this page are from our jobs in Oklahoma and Texas.

How does Gallime soil affect boring in Milam?

The USDA soil survey maps Gallime as the leading named soil series in Milam, covering 13 percent of the mapped area. At about 40 inches below the surface, sandy clay loam is mapped under 32 percent, clay under 22 percent, and average clay content is 31 percent. Those are mapped patterns, not test borings. The clay can hold an open hole but may stick to a reamer and grip pipe, so we plan staged reaming and keep the pipe ready for the pull.

USDA soil survey, inside the Milam mapped community boundaryWhat is mapped
Soil series mappedGallime 13 percent, Cuthbert 11 percent, Eastwood 10 percent, Kirvin 6 percent and Attoyac 6 percent
Texture at the surfacefine sandy loam 36 percent, very fine sandy loam 15 percent and gravelly fine sandy loam 11 percent
Texture about 40 inches downsandy clay loam 32 percent, clay 22 percent and clay loam 15 percent
Engineering class about 40 inches downlean clay (CL) 39 percent, fat clay (CH) 19 percent and clayey sand (SC) 11 percent
Average clay content about 40 inches down31 percent
Bedrock mapped within 60 inches11 percent of the area (0 percent hard rock, 11 percent weathered rock)
Seasonal water table within 60 inches18 percent of the area
Flood prone soils7 percent of the area
High corrosion risk for uncoated steel39 percent of the area

Weathered bedrock is mapped within 60 inches across 11 percent of Milam, with typical bedrock depth at 38 inches; hard bedrock is not mapped in that depth range. Seasonal water tables occur within 60 inches across 18 percent, and flood prone soils cover 7 percent, so Wilson Branch and other drainage routes need attention at pits and crossings. We account for the mapped 39 percent high steel corrosion risk when planning bores along Forest Road 110 in Milam. The Cenozoic terrace deposits include sand, silt, clay and gravel; the Paleogene Early Eocene sedimentary unit includes sand, mud, clay and chalk, so the route may change from soil to softer rock.

How do we drill Milam’s sandy clay loam near Wilson Branch?

For Milam’s mapped sandy clay loam and clay, we plan the bore to keep the hole stable without pushing excess fluid toward roads such as Driggers Road. The exact route and soil conditions guide the setup.

  1. In Gallime and clay, we use a thinner fluid with polymer and ream in stages, since sticky soil can collect on the reamer and grip the pipe.
  2. With fine sandy loam mapped across 36 percent of Milam, we build a bentonite wall cake and stage the ream to help keep loose ground from caving.
  3. Where the mapped seasonal water table reaches within 60 inches, we keep pits small and use pumping as needed, especially near Wilson Branch.
  4. We hydrovac each marked utility on the route before drilling near it, then track depth and pitch from the surface along roads such as Cedar Grove Road.
Walkover locator held over a flowing creek while tracking the drill head on a 385 foot rock bore in Guthrie, Oklahoma
Tracking the drill head with a walkover locator over a flowing creek on a 385 foot bore in Guthrie, Oklahoma.

Where does a line go under Texas State Highway 87 in Milam?

Milam routes may need to pass beneath Texas State Highway 87, Texas State Highway 21, FM 242 or FM 3121, all mapped inside the community. Forest Road 110 is the longest named street at 6.25 miles, followed by Driggers Road at 6.1 miles and Cedar Grove Road at 5.24 miles. Boring beneath pavement keeps the roadway uncut, while a route beside the highway needs a different profile from a direct crossing. The mapped route and line type determine the bore plan.

CrossingTypeMapped extentWho has a say
Texas State Highway 87State highway17.6 roadway miles insideState highway office
Texas State Highway 21State highway7.1 roadway miles insideState highway office
FM 242State highway2 roadway miles insideState highway office
FM 3121State highway1.7 roadway miles insideState highway office
Wilson BranchStream5.45 channel miles insideChecked for Corps of Engineers jurisdiction
Corsey CreekStream3.92 channel miles insideChecked for Corps of Engineers jurisdiction
Beaver CreekStream3.92 channel miles insideChecked for Corps of Engineers jurisdiction
Allen CreekStream3.55 channel miles insideChecked for Corps of Engineers jurisdiction
Carrice CreekStream2.49 channel miles insideChecked for Corps of Engineers jurisdiction
Toledo Bend ReservoirStream1.63 channel miles insideChecked for Corps of Engineers jurisdiction
Manson CreekStream1.56 channel miles insideChecked for Corps of Engineers jurisdiction
Boregas CreekStream1.2 channel miles insideChecked for Corps of Engineers jurisdiction
Nichols CreekStream nearbyAlong the boundaryChecked for Corps of Engineers jurisdiction
Moss CreekStream nearby0.2 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Milam or within 1 mile outside its boundary, and none is mapped for a street and rail crossing. Wilson Branch runs 5.45 channel miles within the community; Corsey Creek and Beaver Creek each run 3.92 channel miles. Public records map 11 street crossings of named streams, so a route near Wilson Branch or Toledo Bend Reservoir needs careful crossing planning and a check for U.S. Army Corps of Engineers jurisdiction.

Who approves a bore near Milam in Sabine County?

Milam is an unincorporated community with no city government, so local street responsibility belongs to Sabine County, while Texas State Highway 87, Texas State Highway 21, FM 242 and FM 3121 fall under TxDOT. For highway right of way, the utility owner files the application in TxDOT’s RULIS system for review by the Lufkin District; we prepare the bore plan and profile and work under the permit issued to that owner. TxDOT cover rules set the bore depth by line type, including 60 inches at highway crossings for electric, communication and water lines and pressurized sewer. A Wilson Branch crossing is checked for Corps jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Which utilities serve addresses in Milam, Sabine County?

Before we plan a bore in Milam, we confirm the address’s water provider with Sabine County or its local water district. EPA drinking water records do not tie systems to towns, and no system carries Milam’s name, so a provider cannot be matched from those records. Deep East Texas Electric Cooperative and Jasper-Newton Electric Cooperative report electric service in Sabine County; we confirm the line owner before planning an electric conduit bore.

Line ownerWhat it isSourceSize
Deep East Texas Electric Cooperative and Jasper-Newton Electric CooperativeElectric utilities reporting service in Sabine CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Milam’s median housing year at 1995: 3 percent of units were built before 1960, 56 percent from 1960 to 1999, and 41 percent in 2000 or later. That mix may mean a project replaces older service or adds a line for newer housing along Cedar Grove Road. Before drilling near marked lines, we hydrovac pothole them; paint shows position, not depth, whether the nearby line is water or electric.

Hydrovac truck and boring equipment staged beside an airport taxiway for utility daylighting in Oklahoma City
Our hydrovac truck and boring equipment beside an airport taxiway in Oklahoma City, set up to expose a utility crossing.

Where is Milam in relation to Pineland?

Milam is an unincorporated community in Sabine County, 17.8 miles northeast of Pineland and 8.3 miles northeast of county seat Hemphill. The mapped community covers 33.15 square miles and sits at 221 feet elevation. We confirm whether a Milam address in Sabine County falls under ZIP codes 75948 or 75959 before planning underground work. San Augustine is 19.9 miles west, while Center is the nearest larger city listed, 33.2 miles northwest. Our Yukon, Oklahoma main office is 449 road miles away, an 8.9 hour drive, so distance is part of planning a bore near Texas State Highway 87.

Places near Milam

What boring work comes up near Driggers Road in Milam?

  • Highway crossing: A bore beneath Texas State Highway 87 avoids cutting the pavement, with the profile set for the line and the road crossing.
  • Road service: A water or sewer line beneath Driggers Road can pass under the traveled surface while pits stay in the dirt on each side.
  • Fiber route: Electric conduit or fiber along Forest Road 110 needs a route planned around marked utilities and the mapped clay soil.
  • Creek crossing: A route beneath Wilson Branch needs depth planned under the channel and a check for Corps jurisdiction during planning.
  • Reservoir service: A line near Toledo Bend Reservoir needs a crossing plan that accounts for the mapped water feature and nearby utilities.
  • County road bore: A line beneath Cedar Grove Road is planned as a bore rather than an open cut through the road surface.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

How do I get a quote for a Milam bore near Wilson Branch?

For a Milam quote, start with an address or map pin near a local reference such as Wilson Branch or Forest Road 110. Tell us what goes underground, such as water or fiber, the pipe or conduit size, and the footage. A sketch or plans help us see the route, pavement and nearby crossings before we scope the work.

The price follows the actual scope near Wilson Branch, not a single measurement. Soil and rock come first in Milam because Gallime and clay can affect reaming and pullback; creek crossings and the 11 mapped street crossings of streams can add planning. Pipe size, route length, exposed utilities, pavement, pits, excavator time and sand backfill also matter. Mobilization reflects the 449 road miles from Yukon, while emergency or high profile work can add demands.

Questions people ask about boring in Milam

Does Trinity take directional boring jobs in Milam and Sabine County, and how are crews assigned?

Yes, we take directional boring work in Milam and across Texas. Our own crews and vetted partner contractor crews can handle a project, while you deal with Trinity through the bore log. For a route near Texas State Highway 87, the job plan accounts for the specific road, soil and utility crossings.

Who is responsible for Cedar Grove Road in Milam, and does a bore require cutting it?

Milam has no city government, so Cedar Grove Road is not a city street; local street responsibility belongs to Sabine County. A directional bore can pass beneath the road without cutting its surface. The route still needs utility locating and a plan for pits on each side.

Are buried lines near Driggers Road in Milam likely to be old or new?

Milam’s housing data show a mix of ages: the median year built is 1995, with 3 percent of units built before 1960 and 41 percent built in 2000 or later. A bore near Driggers Road may replace an older service or add a new one, so marked lines are exposed before drilling nearby.

Can groundwater or flood prone soil affect bore pits near Wilson Branch in Milam?

It can affect pit planning: the USDA soil survey maps seasonal water tables within 60 inches across 18 percent of Milam and flood prone soils across 7 percent. Near Wilson Branch, we plan the crossing depth under the channel and can use smaller pits and pumping where wet ground is encountered.

Does Gallime soil in Milam corrode steel, and what pipe should a bore use?

The USDA soil survey maps high steel corrosion risk across 39 percent of Milam, so the line owner should consider casing and tracer wire materials. When planning a Cedar Grove Road bore, we use HDPE because it is not affected by Milam’s mapped steel corrosion concern. Near Gallime soil, the owner selects the material and any coating based on the project.

What kind of ground might a bore encounter in Milam’s Gallime soil?

Gallime is the most common named soil series in Milam, mapped across 13 percent of the area. At about 40 inches down, the USDA soil survey maps sandy clay loam under 32 percent and clay under 22 percent. Clay can stick to the reamer, while sandier ground can need staged reaming to hold the hole.

Can I reach Trinity after hours about an urgent bore on Cedar Grove Road in Milam?

Yes, a person answers our phone 24 hours a day at (405) 409-7423. For an urgent job near Cedar Grove Road, we can discuss the line, route and access needs; the scope still depends on marked utilities, ground conditions and the work required.

How early should I request a Texas811 locate for a Milam bore near Forest Road 110?

Count back at least 48 hours, excluding Saturdays, Sundays and legal holidays, from the planned excavation start near Forest Road 110. For a Texas State Highway 87 crossing, we schedule around Texas811’s notice of at least two working days. The request cannot be made more than 14 days ahead; if the start slips more than 14 days past the original notice, submit a new request, and refresh worn or moved marks through Texas811.

What affects the cost of a Milam bore beneath Texas State Highway 87?

The job details determine the price, starting with ground conditions because Gallime clay can change reaming and pullback needs. Length, pipe size, exposed utilities and pavement also matter beneath Texas State Highway 87. A creek or drainage crossing, pits, excavator time, sand backfill and mobilization from Yukon can change the scope as well.

Where the Milam facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Milam

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Milam, Texas

Type the address of your job in Milam. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Milam

All counties: Texas county list.