trinityboringsolutions.com

Kountze Texas Directional Boring: Otanya Soil, US 69 and BNSF Railway

Quick Answer: At Pine Street, what does the USDA soil survey map in the top five feet, and what geologic units are mapped? The surface is mostly very fine sandy loam; bedrock is not mapped in the top five feet, while the geologic map identifies the Lissie Formation and alluvial gravel, sand, and silt. Trinity Boring Solutions handles directional boring, also called horizontal directional drilling (HDD), for Kountze crossings such as BNSF Railway tracks. From Yukon, Kountze is 469 road miles away, and access along US 69 can affect mobilization. At Otanya soil sites, sandy clay loam is common at about 40 inches, so crews plan for clay rich ground.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Kountze bores at a glance

  • County seat of Hardin County, Texas. Population 2,125 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 469 miles, about 9.5 hours of driving.
  • Ground: Otanya soil is mapped on 41 percent of the area, with sandy clay loam about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: US 69, US 287, Texas State Highway 326, FM 1293 and FM 418. State permit office: TxDOT Beaumont District.
  • Railroad track inside the boundary: BNSF Railway, with 4 mapped street and rail crossings.
  • Named streams inside the boundary: Cypress Creek.
  • Public water: City of Kountze, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who can I call for directional boring along US 69 in Kountze?

At Pine Street, what does the USDA soil survey show in the top five feet, and what geologic units are mapped? Very fine sandy loam covers much of Kountze, and the geologic map identifies the Lissie Formation. Kountze is in Hardin County, and the Census Bureau Vintage 2024 estimate puts its population at 2,125. Along US 69 or Pine Street, we install water, sewer, gas, electric conduit and fiber by directional boring.

Our main office is in Yukon, Oklahoma, and Kountze work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our family business began in 1965 and has done directional boring since 1982; that history and a record of no utility strike in over 25 years matter around the City of Kountze groundwater lines and electric service reported in Hardin County. You deal with Trinity through the bore log, whichever crew is on site.

Compact Ditch Witch drill rig boring a new utility line across a front yard on a residential street in Edmond, Oklahoma
Our compact Ditch Witch drill boring a new utility line across a front yard on a residential street in Edmond, Oklahoma. Photos on this page are from our jobs in Oklahoma and Texas.

What ground should I expect around Otanya soil in Kountze?

The USDA soil survey maps Otanya across 41 percent of Kountze, with Otanya very fine sandy loam covering 32 percent. Very fine sandy loam is the leading surface texture, mapped across 67 percent of the city. At about 40 inches, sandy clay loam is mapped under 41 percent of the area, and the average clay content at that depth is 18 percent. In Kountze, we use mapped soil patterns for planning, not as substitutes for test borings. The clay rich layer can hold an open hole, but it may stick to the reamer and grip pipe, so the drilling fluid and reaming pace need control.

USDA soil survey, inside the Kountze city limitsWhat is mapped
Soil series mappedOtanya 41 percent, Sorter 22 percent, Hatliff 11 percent, Kirbyville 10 percent and Olive 6 percent
Texture at the surfacevery fine sandy loam 67 percent, fine sandy loam 13 percent and loam 11 percent
Texture about 40 inches downsandy clay loam 41 percent, very fine sandy loam 22 percent and loam 17 percent
Engineering class about 40 inches downlean clay (CL) 66 percent, silt (ML) 22 percent and silty clayey sand (SC SM) 11 percent
Average clay content about 40 inches down18 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches79 percent of the area
Flood prone soils11 percent of the area
High corrosion risk for uncoated steel47 percent of the area

Bedrock is not mapped in the top five feet of Kountze, while the geologic map identifies the Pleistocene Lissie Formation and Chibanian alluvial gravel, sand, and silt. That map does not rule out rock at greater depth. A seasonal water table is mapped within 60 inches across 79 percent of the area, so Pine Street pits may need pumping. Flood prone soils cover 11 percent, a concern near Cypress Creek. High steel corrosion risk is mapped across 47 percent, so the line owner should consider casing and tracer wire materials; HDPE is unaffected by soil corrosion.

How do crews bore Kountze sandy clay loam?

Otanya soils and the mapped sandy clay loam at about 40 inches call for a controlled hole, not a fast pull. Along Pine Street, we match fluid, reaming and pipe handling to the ground and nearby utilities.

  1. At Otanya locations, we use controlled fluid and staged reaming because the sandy clay loam mapped near 40 inches can cling to the reamer.
  2. Where the seasonal water table is shallow in Kountze, we keep Pine Street pits small and pump water out as needed.
  3. Near Cypress Creek, we plan the bore depth below the channel and check the crossing for Corps jurisdiction during planning.
  4. For a route through Kountze, we hydrovac expose each marked utility before the drill approaches, then track depth and pitch with a walkover locator.
Reel of 4 inch HDPE conduit on the exit side of a 385 foot directional bore under creeks and wetland in Guthrie, Oklahoma
A reel of 4 inch HDPE conduit on the exit side of a 385 foot bore under creeks and wetland in Guthrie, Oklahoma.

Where might a Kountze bore go under BNSF Railway?

US 69 and US 287 each have 6.5 mapped roadway miles inside Kountze. Texas State Highway 326 adds 1.7 miles, while FM 1293 and FM 418 also run through the city. Texas State Highway 327 is 1.4 miles beyond the limits. Pine Street, at 4.28 miles in the city, is the longest named street; Lhs Road and Deer Street are also substantial routes. A bore under pavement avoids cutting across the roadway, while access and the planned route determine where the entry and exit pits can sit.

CrossingTypeMapped extentWho has a say
US 69US highway6.5 roadway miles insideState highway office
US 287US highway6.5 roadway miles insideState highway office
Texas State Highway 326State highway1.7 roadway miles insideState highway office
FM 1293State highway1.1 roadway miles insideState highway office
FM 418State highway0.4 roadway miles insideState highway office
Texas State Highway 327Highway nearby1.4 miles outsideState highway office
BNSF RailwayRailroad2.65 track miles insideThe railroad
Cypress CreekStream1.46 channel miles insideChecked for Corps of Engineers jurisdiction
Pea Monk BranchStream nearby0.1 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

BNSF Railway owns 2.65 track miles inside Kountze, on the BNSF Railway Conroe Subdivision. Four mapped street and rail crossings make track coordination relevant to routes near Pine Street and US 69. Cypress Creek runs 1.46 channel miles inside the city, and one mapped street crossing of a named stream is present. Within one mile of Kountze, we account for no mapped lakes or ponds in crossing plans. Creek banks and the channel need a planned crossing depth, with the Cypress Creek route checked for federal waterway jurisdiction during planning.

Who approves a Kountze bore in Hardin County?

Because Kountze is incorporated, we coordinate work on its city streets with the city that owns them. For work in the right of way of US 69, US 287, Texas State Highway 326, FM 1293 or FM 418, the line owner files the utility permit through TxDOT’s online RULIS system, and the TxDOT Beaumont District reviews it. We prepare the bore plan and profile for the owner’s filing and work under its permit. TxDOT cover rules set 60 inches for electric and communication lines crossing a highway, 60 inches for water crossings and 60 inches for pressurized sewer crossings. A BNSF Railway track crossing needs an agreement from the railroad, and the Cypress Creek route is checked for Corps jurisdiction.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Which utilities are near the City of Kountze water lines?

The City of Kountze public water system uses groundwater wells and reports 1,228 service connections serving 1,981 people. That makes the water line owner and route important details for work near Pine Street. Entergy Texas and Sam Houston Electric Cooperative report electric service in Hardin County; the line owner for a specific address is confirmed before planning an electric conduit bore. The countywide report does not identify the electric provider at every Kountze address.

Line ownerWhat it isSourceSize
City of KountzePublic water systemGroundwater wells1,228 connections, 1,981 people served
Entergy Texas and Sam Houston Electric CooperativeElectric utilities reporting service in Hardin CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Kountze’s median housing year at 1991: 18 percent of homes were built before 1960, 58 percent from 1960 to 1999 and 24 percent in 2000 or later. Routes along Pine Street may involve either replacement work or a new service. On Kountze bore paths, we hydrovac pothole every marked utility before drilling nearby because paint shows position, not depth. For example, a proposed line beneath Pine Street calls for exposing marked lines before the drill approaches.

Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building
Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building.

What is near Kountze, including Silsbee?

Kountze is the county seat of Hardin County, at an elevation of 86 feet and covering 3.98 square miles. For Kountze work, ZIP code 77625 serves the city, helping us identify the service area for underground planning. Silsbee, the nearest larger city, is 8.5 miles east; Lumberton is 10.4 miles southeast, and Wildwood is 13.2 miles northwest. From our Yukon, Oklahoma main office, Kountze is 469 road miles and a 9.5 hour drive, shaping travel planning. Those distances help set mobilization for work on US 69, Pine Street or a route toward Silsbee.

Places near Kountze

What boring work comes up around Lhs Road in Kountze?

  • Highway crossing: A bore beneath US 69 avoids cutting the roadway, with the line owner’s TxDOT permit shaping the route and cover.
  • Water service: A route toward the City of Kountze groundwater system needs the existing line exposed before drilling near it.
  • Fiber conduit: Along Pine Street, a fiber route can pass beneath pavement with pits placed off the traveled surface.
  • Creek crossing: A Cypress Creek bore needs a planned depth below the channel and a jurisdiction check during planning.
  • Rail crossing: A route beneath the BNSF Railway Conroe Subdivision needs the railroad’s agreement for the track crossing.
  • Street service: Lhs Road access can guide pit placement for a water, sewer or electric conduit connection.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What should I send for a Pine Street boring quote in Kountze?

For a Kountze quote, send the address or map pin, what is going in the ground, the pipe or conduit size and footage, and a sketch or plans if available. A Pine Street route, a US 69 crossing or work near Cypress Creek can each change the bore plan, so show the crossing and access points clearly.

Mobilization starts with the drive from Yukon, then the Otanya soil and sandy clay loam affect drilling and reaming choices. A route under US 69 or BNSF Railway adds crossing coordination, while Cypress Creek can mean added planning for a water crossing. Pipe size, bore length, exposed utilities, pavement, pits, excavator time and sand backfill also shape the job. For Kountze projects, high profile or emergency work can change scope, so we confirm underground work needs before scheduling.

Questions people ask about boring in Kountze

Does Trinity take directional boring jobs in Kountze and Hardin County?

Yes. We take directional boring work in Kountze and across Texas, with our own crews and vetted partner contractor yards supporting the work. You deal with Trinity from the first call through the bore log, whether the route is on Pine Street or near US 69.

Will a Kountze bore hit rock below the mapped soil?

Bedrock is not mapped in Kountze’s top five feet, but the geologic map identifies the Lissie Formation and alluvial gravel, sand, and silt. Those map units do not rule out rock deeper down. A route near Otanya soil still needs planning for the ground the drill encounters.

Who approves a Kountze bore under US 69?

The line owner applies for the TxDOT utility permit through RULIS, and the TxDOT Beaumont District reviews work in the US 69 right of way. We prepare the bore plan and profile for the owner’s filing. The permit sets the approved route and may specify a different cover depth.

What does a Kountze bore under BNSF Railway need?

A crossing of the 2.65 track miles BNSF Railway owns in Kountze needs the railroad’s agreement. The agreement establishes crossing conditions such as casing, depth and flagging. If the route also occupies highway right of way, TxDOT asks for a copy.

Can a Kountze line be bored under Cypress Creek?

A bore under Cypress Creek can be planned, with its depth set to pass below the channel. The 1.46 mile creek reach inside Kountze makes the crossing route a site specific matter. During planning, the proposed water crossing is checked for U.S. Army Corps of Engineers jurisdiction.

For underground planning in Kountze, who runs its public water system, and where does its water come from?

The City of Kountze owns the public water system, which draws from groundwater wells. Public records report 1,228 service connections serving 1,981 people. For a bore near Pine Street, the water line location needs to be established before the drill gets close.

How far is Kountze from Yukon, and does Silsbee affect mobilization?

Kountze is 469 road miles from our Yukon, Oklahoma main office, a 9.5 hour drive. Silsbee is 8.5 miles east of Kountze, but the Yukon drive is the relevant mobilization distance. The route and access for a job along US 69 also factor into planning.

How much notice does a Kountze bore near Pine Street need?

Texas811 needs a locate request at least 48 hours before excavation, excluding weekends and legal holidays, and no earlier than 14 days before the start. If a Pine Street start slips more than 14 days past the original notice, make a new request. When marks are worn or moved in Kountze, we have them refreshed through Texas811 before underground work continues.

What affects the cost of a Kountze directional bore under US 69?

The job’s length and pipe size matter, along with Otanya soil, exposed utilities, pavement and pits. A US 69 crossing or a route near BNSF Railway adds crossing requirements, while Cypress Creek can add planning. Mobilization, excavator time, sand backfill and emergency or high profile work can also change the job scope.

Where the Kountze facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Kountze

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Kountze, Texas

Type the address of your job in Kountze. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Kountze

Same county: Sour Lake. All counties: Texas county list.