trinityboringsolutions.com

Silsbee Texas Directional Boring: Otanya Soil, US 96 and BNSF Railway

Quick Answer: The USDA soil survey maps Otanya very fine sandy loam across 32 percent of Silsbee, with sandy clay loam common at about 40 inches. We take directional boring, also called horizontal directional drilling (HDD), work in Silsbee, Texas, including routes beneath US 96. The Yukon, Oklahoma main office is 478 road miles away, and BNSF Railway is one local crossing to plan around. Sandy clay loam can hold a bore open but cling to the reamer, so the ground and pull timing matter.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Silsbee bores at a glance

  • Incorporated city in Hardin County, Texas. Population 6,711 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 478 miles, about 9.7 hours of driving.
  • Ground: Otanya soil is mapped on 35 percent of the area, with sandy clay loam about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: US 96, US 96 Business, Texas State Highway 327, FM 418 and Texas State Highway 92. State permit office: TxDOT Beaumont District.
  • Railroad track inside the boundary: BNSF Railway, with 32 mapped street and rail crossings.
  • Public water: City of Silsbee, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who handles directional boring along Silsbee’s 5th Street?

We take directional boring work in Silsbee, Hardin County, where the Census Bureau Vintage 2024 estimate puts the population at 6,711. Our crews install water, sewer, gas, electric conduit and fiber for routes along streets such as 5th Street or toward US 96. The line type and size help us plan the bore around the route and existing services.

Our main office is in Yukon, Oklahoma, and Silsbee work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We have had no utility strike in over 25 years, a record we bring to routes that may meet the City of Silsbee water lines. Our family business began in 1965, and we have done directional boring since 1982; we bring that experience to Silsbee planning.

Trinity Boring Solutions Ditch Witch JT922 HDD rig and vacuum excavation truck on a commercial bore in Oklahoma City
Our Ditch Witch JT922 drill and vacuum excavation truck on a commercial bore in Oklahoma City. Photos on this page are from our jobs in Oklahoma and Texas.

What ground should a Silsbee bore expect in Otanya soil?

The USDA soil survey maps Otanya as the leading soil series in Silsbee, at 35 percent of the mapped area. Otanya very fine sandy loam, on 1 to 3 percent slopes, covers 32 percent. At about 40 inches below the surface, sandy clay loam is mapped under 47 percent of the area, and loam under 35 percent. The survey also maps an average clay content of 21 percent at that depth. These are mapped patterns, not test borings, so a route near 5th Street can still need its own ground checks.

USDA soil survey, inside the Silsbee city limitsWhat is mapped
Soil series mappedOtanya 35 percent, Kirbyville 27 percent, Belrose 10 percent, Silsbee 8 percent and Waller 8 percent
Texture at the surfacevery fine sandy loam 41 percent, fine sandy loam 30 percent and loamy fine sand 19 percent
Texture about 40 inches downsandy clay loam 47 percent, loam 35 percent and very fine sandy loam 10 percent
Engineering class about 40 inches downlean clay (CL) 81 percent, silty sand (SM) 6 percent and silt (ML) 5 percent
Average clay content about 40 inches down21 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches77 percent of the area
Flood prone soils3 percent of the area
High corrosion risk for uncoated steel44 percent of the area

Across Silsbee, the USDA map places no bedrock in the upper five feet; that does not establish what lies deeper. A seasonal water table is mapped within 60 inches across 77 percent of the area, so pits may need pumping. Flood prone soils cover 3 percent, a reason to plan carefully near Village Creek. High steel corrosion risk is mapped across 44 percent, so the line owner should weigh casing and tracer wire materials; HDPE avoids that steel concern. The mapped alluvial sand, silt, and clay unit is Chibanian age, with interbedded sand, silt, clay, and minor gravel that can vary along a bore.

How do crews handle Silsbee’s sandy clay loam?

Silsbee’s sandy clay loam can stay open while also sticking to tooling. We adjust the drilling fluid and reaming sequence to the ground, and track each bore past the marked services along local streets.

  1. With sandy clay loam mapped under 47 percent of Silsbee at about 40 inches, we manage fluid and ream in stages to limit sticky buildup on the tooling.
  2. A seasonal water table is mapped within 60 inches across 77 percent of Silsbee, so we keep pits small and plan to pump water where needed.
  3. Very fine sandy loam and loamy fine sand are common near the surface; we use staged reaming and have the pipe ready before the final pass.
  4. Along a route such as 5th Street, we hydrovac marked utilities before drilling near them, then track the drill head and log depth and pitch.
Bore pit with a 6 inch PVC sleeve, traffic cones and blue water line flags at NE 24th Street in Oklahoma City
A bore pit with a 6 inch PVC sleeve, traffic cones and blue water line flags at NE 24th Street in Oklahoma City.

Which roads, tracks or creeks can a Silsbee bore cross near Village Creek?

US 96 runs 7.2 mapped roadway miles inside Silsbee, and US 96 Business adds 4.1 miles. Texas State Highway 327, FM 418 and Texas State Highway 92 also run within the city. A line beneath existing highway pavement is bored or tunneled rather than open cut, with the permit setting the crossing details. Among named streets, 5th Street runs 5.19 miles, Avenue North 4.95 miles and Tiger Boulevard 2.64 miles. Their lengths make the exact route and nearby buried lines important when laying out pits.

CrossingTypeMapped extentWho has a say
US 96US highway7.2 roadway miles insideState highway office
US 96 BusinessUS highway4.1 roadway miles insideState highway office
Texas State Highway 327State highway5.2 roadway miles insideState highway office
FM 418State highway4.1 roadway miles insideState highway office
Texas State Highway 92State highway2 roadway miles insideState highway office
BNSF RailwayRailroad11.5 track miles insideThe railroad
Village CreekStream nearby0.1 miles outsideChecked for Corps of Engineers jurisdiction
Ellis BranchStream nearby0.3 miles outsideChecked for Corps of Engineers jurisdiction
Mill CreekStream nearby0.6 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

BNSF Railway has 11.5 track miles in Silsbee, and 32 mapped street and rail crossings make track location a practical planning concern. A railroad crossing agreement governs casing, depth and flagging. No streams are mapped inside the city, but Village Creek is 0.1 miles from the limits, with Ellis Branch 0.3 miles and Mill Creek 0.6 miles away. No street crossings of named streams are mapped inside Silsbee, and no lakes or ponds are mapped within one mile. A creek route still needs a jurisdiction check during planning.

Do I need a permit for a Silsbee bore in Hardin County?

For a bore along US 96, US 96 Business, Texas State Highway 327, FM 418 or Texas State Highway 92, TxDOT reviews work in the right of way through its Beaumont District. The utility that owns the line files the application in TxDOT’s online RULIS system; we prepare the bore plan and profile for that filing and work under the owner’s permit. Silsbee is incorporated, so its city streets, including 5th Street, belong to the city. A crossing of BNSF Railway needs an agreement with the railroad, and a planned crossing near Village Creek is checked for U.S. Army Corps of Engineers jurisdiction.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

When we plan a bore near the City of Silsbee water system, who owns the nearby lines?

The City of Silsbee public water system uses groundwater wells and reports 3,358 service connections serving 10,026 people. That network is relevant when planning a new service or a route near existing water lines. In Hardin County, Entergy Texas and Sam Houston Electric Cooperative report electric service. The provider can vary by address, so we confirm the line owner before planning an electric conduit bore near 5th Street or US 96.

Line ownerWhat it isSourceSize
City of SilsbeePublic water systemGroundwater wells3,358 connections, 10,026 people served
Entergy Texas and Sam Houston Electric CooperativeElectric utilities reporting service in Hardin CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

We use Silsbee’s median housing year of 1975 from the 2019 to 2023 five year estimates as context when planning underground work. We consider Silsbee’s housing mix for underground planning: 29 percent of homes were built before 1960, 45 percent from 1960 to 1999, and 26 percent in 2000 or later. That mix can mean a route serves a new connection or replaces older pipe. Along 5th Street, we hydrovac pothole each marked utility on the bore path before drilling near it, because paint gives position but not depth.

Mini excavator digging beside a pad mounted electrical transformer with red dirt spoil and a vacuum excavation trailer on site
Digging beside a pad mounted electric transformer with a vacuum excavation trailer on site.

How far is Silsbee from Lumberton and our Yukon office?

Silsbee is in Hardin County, 100 percent of the city area, and covers 7.68 square miles at an elevation of 80 feet. The city uses ZIP code 77656. Lumberton is 6.5 miles south and is the nearest larger city; Evadale is 7.6 miles east, and Kountze, the county seat, is 8.5 miles west. From the Yukon, Oklahoma main office, the road trip to Silsbee is 478 miles and 9.7 drive hours. That distance is part of planning crew and equipment mobilization for a bore on US 96 or a local street.

Places near Silsbee

What boring work comes up around Silsbee’s Tiger Boulevard?

  • Highway crossing: A bore beneath US 96 or FM 418 keeps the line below the paved route instead of cutting through it.
  • Water service: A new line near the City of Silsbee system needs a route checked against groundwater well connections and marked utilities.
  • Fiber route: Tiger Boulevard or Avenue North can carry a conduit bore where the plan must account for existing street services.
  • Rail crossing: BNSF Railway has 11.5 track miles in Silsbee, so a proposed crossing needs railroad coordination on casing, depth and flagging.
  • Creek approach: A route toward Village Creek needs channel depth planning and a check for U.S. Army Corps of Engineers jurisdiction.
  • Street service: On 5th Street, potholing marked lines can show their actual depth before a bore passes nearby.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What should I send for a Silsbee bore near US 96?

A map pin matters in Silsbee because a route near US 96 can have different pavement, utility and access conditions than one on 5th Street. Send the job address or pin, what is going in the ground, the pipe or conduit size and the footage. A sketch or plans help us check the route and locate likely crossings.

The price follows the ground, crossings and logistics for the specific Silsbee route. Otanya soil and sandy clay loam affect drilling and reaming; crossings of US 96 or BNSF Railway add planning and permit or agreement needs. We also account for line size and length, utilities to expose, pavement, creek or drainage crossings, pits, excavator time and sand backfill. At 478 road miles from Yukon, mobilization is another job factor.

Questions people ask about boring in Silsbee

Does Trinity take directional boring jobs in Silsbee and Hardin County?

Yes. We take work in Silsbee and across Texas, with our own crews and partner drilling contractors vetted by Trinity supporting jobs from satellite yards. You work with Trinity from the first call through the bore log, whatever crew is on site. Routes near 5th Street or US 96 are planned around the specific ground and crossings.

Which authority approves a bore beneath US 96 in Silsbee, so we can plan the crossing permit correctly?

TxDOT reviews a US 96 right of way bore through its Beaumont District. The utility that owns the line submits the application in the online RULIS system, and we provide the bore plan and profile for the owner’s filing. The permit addresses the crossing requirements for the particular US 96 location.

What does a bore beneath BNSF Railway in Silsbee require from us before we schedule that railroad crossing?

A crossing of the BNSF Railway track requires an agreement with the railroad owner. That agreement sets the casing, depth and flagging conditions for the crossing. With 11.5 track miles mapped inside Silsbee, the route needs to identify the track location and coordinate the crossing before the bore is planned.

Can a line be bored beneath Village Creek near Silsbee?

A bore can be planned beneath a creek, subject to route and ground conditions. Village Creek is 0.1 miles from Silsbee’s limits, and the crossing is checked during planning for U.S. Army Corps of Engineers jurisdiction. The profile must account for the channel, banks and the mapped flood prone soils nearby.

Who runs the City of Silsbee public water system, and where does its water come from for our crossing plans?

The City of Silsbee owns and runs the public water system, which draws from groundwater wells. We plan Silsbee underground work with public records showing 3,358 service connections and 10,026 people served. A proposed water bore near the system needs its route checked against marked existing lines before drilling.

Which electric providers should I check for a Silsbee job in Hardin County?

Entergy Texas and Sam Houston Electric Cooperative report electric service in Hardin County. That does not identify the provider for every Silsbee address, so the line owner must be confirmed before planning an electric conduit bore. We check marked lines near the proposed route, including streets such as Tiger Boulevard.

How much 811 notice does a Silsbee bore near 5th Street need?

For a bore near 5th Street, Texas811 needs a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before the start. For Silsbee work, if our start slips more than 14 days past the original notice, we submit a new request. Before we continue boring in Silsbee, worn or moved marks must be refreshed through Texas811.

Does Silsbee’s distance from Lumberton change a job mobilization?

Lumberton is 6.5 miles south of Silsbee, while our main office in Yukon, Oklahoma is 478 road miles away. That distance can affect crew and equipment mobilization for a job on US 96 or a local street. The route, access and equipment needs help determine the logistics.

What affects the cost of a directional bore near US 96 in Silsbee?

The route and scope drive the price. For a Silsbee bore, we consider length, pipe or conduit size, Otanya soil and sandy clay loam, marked utilities to expose, pavement, and crossings such as US 96 or BNSF Railway. Pits, drainage work, excavator time and mobilization from Yukon also affect the job.

Where the Silsbee facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Silsbee

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Silsbee, Texas

Type the address of your job in Silsbee. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Silsbee

Same county: Sour Lake · Pinewood Estates · Wildwood. All counties: Texas county list.