trinityboringsolutions.com

Anton Texas Directional Boring: Olton Clay Loam, US 84 and BNSF Railway

Quick Answer: What does the top five feet around Anton look like, and what is below it? The USDA soil survey maps Olton clay loam across 91 percent of Anton, with clay loam at about 40 inches. We take directional boring, also called horizontal directional drilling (HDD), in Anton, where routes can pass beneath BNSF Railway tracks. Anton is 379 road miles from our Yukon office, and US 84 can shape access and mobilization. Sticky clay loam can ball on a reamer, so staged reaming helps manage the bore.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Anton bores at a glance

  • Incorporated city in Hockley County, Texas. Population 926 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 379 miles, about 7.2 hours of driving.
  • Ground: Olton soil is mapped on 91 percent of the area, with clay loam about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: US 84, FM 168 and FM 597. State permit office: TxDOT Lubbock District.
  • Railroad track inside the boundary: BNSF Railway, with 3 mapped street and rail crossings.
  • Public water: City of Anton, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Which contractor handles directional boring near US 84 in Anton?

What does the top five feet of ground look like in Anton, and what is under it? The USDA soil survey maps Olton clay loam across 91 percent of the city. Trinity Boring Solutions takes work in Anton, Hockley County, where the Census Bureau Vintage 2024 estimate puts the population at 926. We install water, sewer, gas, electric conduit and fiber, including routes beneath streets such as Santa Fe Street.

Our main office is in Yukon, Oklahoma, and Anton work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We are a family business started in 1965, with directional boring work dating to 1982. With the City of Anton water system and electric service reported in Hockley County already in place, our record of no utility strike in over 25 years reflects the care buried lines require.

Trinity Boring Solutions directional boring crew, drill rig and hydrovac trailer staged along an airport service road at Will Rogers World Airport in Oklahoma City
Our boring crew, drill and hydrovac trailer staged along a service road at Will Rogers World Airport in Oklahoma City. Photos on this page are from our jobs in Oklahoma and Texas.

What kind of ground does Anton have around Olton soil?

The USDA soil survey maps Olton soil across 91 percent of Anton and Acuff soil across 9 percent. Olton clay loam, with slopes of 0 to 1 percent, accounts for 91 percent of mapped area. At about 40 inches below the surface, clay loam is mapped across 91 percent and sandy clay loam across 9 percent. For boring in Anton, we use the average clay content of 38 percent at that depth when planning the ground profile. In Anton, we treat these as mapped soil patterns for planning a boring alignment, not as test borings from a proposed crossing. Clay loam can hold an open hole but may stick to the reamer and grip pipe.

USDA soil survey, inside the Anton city limitsWhat is mapped
Soil series mappedOlton 91 percent and Acuff 9 percent
Texture at the surfaceclay loam 91 percent and loam 9 percent
Texture about 40 inches downclay loam 91 percent and sandy clay loam 9 percent
Engineering class about 40 inches downlean clay (CL) 100 percent
Average clay content about 40 inches down38 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches0 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel91 percent of the area

For an Anton crossing, we do not treat the top five feet as mapped bedrock, while deeper rock remains possible. When planning work in Anton, we treat seasonal water table and flood prone soils as unmapped conditions, not confirmed site conditions. The USDA soil survey maps high steel corrosion risk across 91 percent of the area, so the line owner should weigh casing and tracer wire materials; HDPE avoids that concern. The Blackwater Draw Formation, a Cenozoic unit, includes sand, silt and locally clayey material, reported as thick as 25 feet.

How do we drill Anton clay loam?

Olton clay loam covers most of Anton, so we plan for sticky cuttings and watch the drilling fluid near pavement. The route and utility marks around streets such as Santa Fe Street shape the setup.

  1. Fluid and reaming: In Anton’s mapped Olton clay loam, we use a fluid mix suited to sticky cuttings and open the bore in stages to manage reamer buildup.
  2. Pressure control: Because heavy clay is mapped across most of Anton, we watch fluid returns near US 84 pavement so pressure does not lift the surface.
  3. Utility exposure: Before drilling near a marked line on Santa Fe Street, we hydrovac pothole it; locator paint shows the route, not its depth.
  4. Tracking and pullback: We follow the drill head from the surface and log depth and pitch along the Anton route, with pipe ready before the final ream.
Open bore pit in red Oklahoma dirt with white PVC conduit stub ups and an orange safety barrier
An open bore pit in red Oklahoma dirt with PVC conduit stubbed up and a safety barrier around it.

Which roads and tracks can a bore cross in Anton near BNSF Railway?

US 84, FM 168 and FM 597 run within Anton, so a route beside or beneath them needs attention to roadway limits and surface access. Texas State Highway 168 is also 0.3 miles outside the city limits. Spade Road is the longest named street at 1.35 miles, followed by Santa Fe Street at 1.28 miles and Ellwood Boulevard at 1.0 mile. Those streets offer possible bore corridors, but the specific route and marked utilities determine pit locations and clearance.

CrossingTypeMapped extentWho has a say
US 84US highway0.2 roadway miles insideState highway office
FM 168State highway1.3 roadway miles insideState highway office
FM 597State highway0.7 roadway miles insideState highway office
Texas State Highway 168Highway nearby0.3 miles outsideState highway office
BNSF RailwayRailroad2.67 track miles insideThe railroad
Swipe the table sideways to see every column.

BNSF Railway owns 2.67 track miles inside Anton, on the BNSF Railway Slaton Subdivision. Public mapping shows 3 street and rail crossings in the city, so a route near those tracks needs railroad coordination. No streams are mapped inside or within one mile of Anton, and none of the city street crossings are mapped over named streams. No lakes or ponds are mapped within one mile, so the mapped local crossing picture is roads and rail rather than waterways.

Who handles permits for a bore in Anton and Hockley County?

US 84, FM 168 and FM 597 are state roadways, so work in their right of way needs a TxDOT utility permit. The TxDOT Lubbock District reviews the application, which the utility that owns the line submits through RULIS; we prepare the bore plan and profile and work under that owner’s permit. TxDOT requires a bore or tunnel beneath existing highway pavement, with required cover and casing set through the applicable rules and permit. A crossing of the BNSF Railway track miles in Anton also needs an agreement from BNSF Railway. Because Anton is incorporated, we recognize that its city streets belong to the city when coordinating a boring route.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Which utilities are near the City of Anton water system?

The City of Anton public water system uses groundwater wells and reports 468 service connections serving 907 people. Those water lines may affect a bore along Santa Fe Street or another city route. Electric service reported in Hockley County includes Southwestern Public Service, Lamb County Electric Cooperative, Lyntegar Electric Cooperative and South Plains Electric Cooperative. We confirm the electric line owner for the specific route before planning a conduit bore, since the county list does not identify the provider at every address.

Line ownerWhat it isSourceSize
City of AntonPublic water systemGroundwater wells468 connections, 907 people served
Southwestern Public Service, Lamb County Electric Cooperative, Lyntegar Electric Cooperative and South Plains Electric CooperativeElectric utilities reporting service in Hockley CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

For underground work in Anton, we consider the American Community Survey 2019 to 2023 five year estimates that put median housing year at 1968. For Anton underground work, survey estimates provide context: 38 percent of homes predate 1960, 51 percent date from 1960 to 1999, and 11 percent from 2000 or later. That mix can mean either replacing older service lines or adding a new connection near Ellwood Boulevard. We hydrovac pothole each marked utility on the bore path before drilling near it; paint shows position, not depth. For example, a marked line beneath Ellwood Boulevard needs to be exposed before the drill approaches.

Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building
Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building.

Where is Anton in relation to Littlefield and Yukon?

Anton is an incorporated city in Hockley County, at an elevation of 3,390 feet and covering 0.73 square miles. Its ZIP code is 79313. Spade is 8.0 miles north, Whitharral is 10.7 miles southwest and Littlefield, the nearest larger city, is 12.4 miles northwest. Shallowater is 13.0 miles southeast and Smyer is 15.4 miles south. Levelland, the county seat, is 19.6 miles southwest. Our Yukon, Oklahoma yard is 379 road miles away, a 7.2 hour drive, which affects mobilization for work near US 84.

Places near Anton

What kinds of bores come up near Spade Road in Anton?

  • Highway crossing: A bore beneath US 84 needs a planned route that stays within the TxDOT permit and avoids open cutting existing highway pavement.
  • Water service: A connection near Santa Fe Street can be routed around marked lines serving the City of Anton groundwater system.
  • Fiber route: A fiber bore along Spade Road can use a narrow trenchless path while accounting for Anton’s mapped Olton clay loam.
  • Rail crossing: A route under BNSF Railway track in Anton needs coordination with the railroad owner before the crossing is planned.
  • Street replacement: A replacement line near Ellwood Boulevard can pass beneath pavement, with marked utilities exposed before drilling approaches them.
  • Conduit bore: Electric conduit along FM 168 needs the line owner confirmed and the route checked against marked services.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What should I send for a bore quote near Duggan Avenue in Anton?

A map pin or address near Duggan Avenue matters because the exact route can change which utilities, pavement or BNSF Railway tracks are involved. Send what will go in the ground, the pipe or conduit size and the footage. A sketch or plans help us see the entry and exit pits and the route through Anton.

Olton clay loam is the first pricing factor to assess because sticky cuttings and reaming needs can affect the work. The number of utilities to expose, the pipe size and bore length also matter. A route near BNSF Railway may need added crossing coordination, while pavement on US 84 affects the installation plan. Pit work, concrete, sand backfill and excavator time can change the scope. At 379 road miles from Yukon, mobilization is another part of pricing, especially for work in Anton.

Questions people ask about boring in Anton

Does Trinity Boring Solutions take directional boring jobs in Anton, Hockley County?

Yes. We take directional boring work in Anton, Hockley County, and staff it with our own crews or vetted partner contractor yards. For boring in Anton, we carry your project from the first call through the bore log, whatever crew is assigned to the work. A route near US 84 or BNSF Railway still needs its own site and crossing plan.

For boring coordination in Anton, who runs the public water system, and where does its water come from?

The City of Anton owns its public water system, which draws water from groundwater wells. Public records list 468 service connections serving 907 people. If a proposed service near Santa Fe Street follows an existing water line, we locate and expose marked utilities before drilling close to it.

Which electric utilities report service in Hockley County near Anton?

Southwestern Public Service, Lamb County Electric Cooperative, Lyntegar Electric Cooperative and South Plains Electric Cooperative report electric service in Hockley County. That list does not identify the provider at every Anton address. Before planning conduit near FM 597, we confirm the line owner and the conduit requirements with that owner.

Does Anton or Hockley County control Ellwood Boulevard, and must a bore cut it?

Anton is incorporated, so Ellwood Boulevard is a city street rather than a county street. A directional bore can pass below pavement without cutting it, subject to the route and approvals that apply. We first expose marked utilities along the planned path and set the pits outside the pavement where the site allows.

What do Anton homes along Santa Fe Street tell us about replacement bores?

Anton’s median housing year is 1968, according to the American Community Survey 2019 to 2023 five year estimates. Older housing can mean replacing an existing service, while later construction may need a new connection. For a route near Santa Fe Street, locating and potholing marked lines helps us plan around what is already buried.

Does Olton soil in Anton corrode steel, and what pipe should I use?

The USDA soil survey maps high steel corrosion risk across 91 percent of Anton, where Olton clay loam is the dominant soil. The line owner should consider casing and tracer wire materials. HDPE is not affected by this soil corrosion concern, but the owner selects the materials for the line near Spade Road.

How far is Anton from Yukon, and does nearby Littlefield change mobilization?

From our Yukon, Oklahoma main office, we cover the 379 road miles to Anton, a 7.2 hour drive for project planning. Littlefield is 12.4 miles northwest of Anton, but the job location and route determine mobilization. A bore near US 84 or BNSF Railway may also involve access and crossing planning specific to that site.

How much notice does Texas811 need for a bore near Spade Road in Anton?

For a bore near Spade Road, Texas law requires a Texas811 locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before it. Texas811 describes that as two working days. If the start moves more than 14 days past the original notice, submit a new request; refresh worn or moved marks through Texas811 before work resumes.

What affects the price of a directional bore near US 84 in Anton?

The Olton clay loam matters because sticky soil can change fluid and reaming needs. Length, pipe or conduit size, utility exposures, pavement and pit work also affect the scope. A route at US 84 or BNSF Railway may require added crossing planning, and mobilization reflects Anton’s 379 road miles from Yukon.

Where the Anton facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Anton

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Anton, Texas

Type the address of your job in Anton. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Anton

Same county: Levelland · Sundown · Ropesville · Opdyke West. All counties: Texas county list.