trinityboringsolutions.com

Lockett Texas Directional Boring: Miles Loamy Fine Sand, US 70, Sandy Clay Loam

Quick Answer: US 70 is the main highway crossing in Lockett, where Trinity Boring Solutions handles directional boring, also called horizontal directional drilling (HDD), in Texas. Lockett is 181 road miles from our Yukon, Oklahoma main office, so mobilization is part of planning a bore near FM 433. USDA soil survey maps show sandy clay loam at about 40 inches across 94% of the mapped area. That clay can hold the hole and grip pipe, so we plan the reaming and pull around the ground.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Lockett bores at a glance

  • Unincorporated community in Wilbarger County, Texas. Population 173 (2020 Census count).
  • Road distance from our Yukon, Oklahoma main office: 181 miles, about 3.7 hours of driving.
  • Ground: Miles soil is mapped on 93 percent of the area, with sandy clay loam about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: US 70 and FM 433. State permit office: TxDOT Wichita Falls District.
  • Railroad track inside the boundary: none mapped.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who can I call for directional boring near US 70 in Lockett?

Trinity Boring Solutions handles directional boring in Lockett, Wilbarger County, where US 70 is the main mapped highway route. The 2020 Census count for this unincorporated community is 173 people; the Census Bureau does not publish yearly estimates for unincorporated places. Water, sewer, gas, electric conduit and fiber can be routed beneath streets such as 17th Street, with the exact path set around marked lines.

Our main office is in Yukon, Oklahoma, and Lockett work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our equipment handles 3/4 inch service lines through 48 inch casing and bores from 10 feet to 5,000 feet. A short service near 2nd Street and a longer casing run beneath US 70 show the range. Our family business began in 1965, and since 1982 we have done directional boring, planning carefully around Lockett’s US 70 crossings.

Compact Ditch Witch drill rig boring a new utility line across a front yard on a residential street in Edmond, Oklahoma
Our compact Ditch Witch drill boring a new utility line across a front yard on a residential street in Edmond, Oklahoma. Photos on this page are from our jobs in Oklahoma and Texas.

What is Miles soil like to bore through in Lockett?

The USDA soil survey maps Miles soils across 93% of Lockett, with loamy fine sand at the surface over finer material. Loamy fine sand covers 72% of the mapped area, while fine sandy loam covers 28%. At about 40 inches, sandy clay loam is mapped under 94% of the area, with an average clay content of 27%. For Lockett, our mapped Miles and Springer soil patterns guide planning, but they are not test borings. The sandy surface can loosen behind the drill, while the clay richer layer can hold the hole and grip the pipe.

USDA soil survey, inside the Lockett mapped community boundaryWhat is mapped
Soil series mappedMiles 93 percent and Springer 5 percent
Texture at the surfaceloamy fine sand 72 percent and fine sandy loam 28 percent
Texture about 40 inches downsandy clay loam 94 percent and fine sandy loam 5 percent
Engineering class about 40 inches downlean clay (CL) 68 percent, clayey sand (SC) 27 percent and silty clayey sand (SC SM) 5 percent
Average clay content about 40 inches down27 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches0 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel0 percent of the area

The soil survey does not map bedrock within the top five feet of Lockett, which does not rule out rock at greater depth. Seasonal water table and flood prone soils are not mapped, so the survey does not point to widespread shallow water or flood soil concerns. High steel corrosion risk is not mapped either. The geologic map shows Quartz Sand Decomposition Residuum of Cenozoic age, including sand and locally cemented material, plus Early Permian sedimentary rock. A harder patch can slow drilling even where shallow bedrock is not mapped.

How do crews bore sandy clay loam in Lockett?

We adjust the bore for Lockett’s sandy surface and the sandy clay loam mapped below it. The loose upper material needs support, while clay can cling to the reamer and pipe, so we plan the hole and pull in sequence.

  1. We check the proposed Lockett path against Texas811 marks, then hydrovac each marked utility before drilling near it; paint along 17th Street does not show depth.
  2. A walkover locator follows the drill head as it advances near US 70, while the crew logs depth and pitch to steer the bore.
  3. Where Miles loamy fine sand is mapped at the surface, drilling fluid supports the hole; staged reaming helps manage ground that may loosen behind the bit.
  4. In the sandy clay loam mapped around 40 inches down, we plan thinner fluid and staged reaming, then pull the pipe after opening the hole.
Trinity Boring Solutions water trailer supplying water for bentonite drilling fluid on a sleeve bore in northeast OKC
Our water trailer feeding the bentonite drilling fluid mix on a sleeve bore in northeast Oklahoma City.

Which roads, tracks or creeks can a bore cross in Lockett near US 70?

US 70 runs for 1.6 mapped roadway miles inside the Lockett community boundary, and FM 433 accounts for another 0.4 miles. Neither route has mapped highway miles just outside the boundary within 1.5 miles. The longer named local streets include 17th Street at 0.24 miles, 7th Street at 0.17 miles and 2nd Street at 0.17 miles. A bore route beneath US 70 or one of these streets can leave the pavement uncut, with entry and exit pits placed in dirt where access allows.

CrossingTypeMapped extentWho has a say
US 70US highway1.6 roadway miles insideState highway office
FM 433State highway0.4 roadway miles insideState highway office
Swipe the table sideways to see every column.

No railroad is mapped inside Lockett or within 1 mile outside the community boundary, and no street and rail crossing is mapped. There are also no mapped streams inside or within 1 mile, and no lakes or ponds within 1 mile. That means the mapped route does not show a local track or named water crossing to plan around. A site check along 17th Street still matters because the actual bore path and buried utilities must be confirmed.

Do I need a permit to bore under US 70 in Wilbarger County in Lockett?

A bore under US 70 or FM 433 in Lockett needs a TxDOT utility permit for work in the highway right of way. Lockett is unincorporated, so there is no city government; local streets and approvals belong to the county or state, depending on the route. The line owner, not the driller, files through TxDOT’s RULIS system, and the Wichita Falls District reviews the application. We prepare the bore plan and profile for the owner. At highway crossings, required cover is 60 inches for electric, communication and water lines, and for pressurized sewer lines; the permit may set a different depth.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

What is already in the ground in Wilbarger County near Lockett?

The water provider for a specific Lockett address has to be confirmed with the county or local water district before a bore is planned; available EPA records do not match a system to this place. Utilities reporting electric service in Wilbarger County include AEP Texas North, Oncor Electric Delivery Company, Southwestern Public Service and Tri-County Electric Cooperative. Those county reports do not identify the provider at every address, so we confirm the line owner before planning an electric conduit bore near 7th Street.

Line ownerWhat it isSourceSize
AEP Texas North, Oncor Electric Delivery Company, Southwestern Public Service and Tri-County Electric CooperativeElectric utilities reporting service in Wilbarger CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

Lockett’s median housing year was 1951 in the American Community Survey 2019 to 2023 five year estimates; we still plan each bore route to site conditions. The estimates say 87% of housing was built before 1960, 6% from 1960 to 1999 and 7% in 2000 or later. That older housing stock can make replacement lines beneath 7th Street a likely planning need, while newer services still require a checked route. Before drilling near a marked line, we hydrovac pothole it; paint shows position, not depth.

Mini excavator digging beside a pad mounted electrical transformer with red dirt spoil and a vacuum excavation trailer on site
Digging beside a pad mounted electric transformer with a vacuum excavation trailer on site.

How far is Lockett from Vernon and our Yukon office?

Lockett is an unincorporated community in Wilbarger County, at an elevation of 1,291 feet, covering 3.0 square miles and using ZIP code 76384. Vernon, the county seat and nearest larger city, is 6.2 miles northeast. Oklaunion is 13.5 miles east, Chillicothe is 14.4 miles northwest, Harrold is 19.5 miles east and Crowell is 21.2 miles west. From our Yukon, Oklahoma main office, the road distance is 181 miles and the drive is 3.7 hours, which figures into mobilization for work near US 70.

Places near Lockett

What boring work comes up near 2nd Street in Lockett?

  • Highway crossing: A bore beneath US 70 can carry a water line or conduit without cutting through the highway pavement.
  • Street service: A short water or sewer service along 2nd Street needs a route checked against marked utilities and the property connection point.
  • Replacement line: Older housing near 7th Street can call for a replacement water or sewer bore, with each marked line exposed before drilling nearby.
  • Fiber route: A fiber conduit beneath 17th Street can avoid an open cut across pavement when entry and exit pits fit the route.
  • Electric conduit: Near FM 433, we confirm the line owner and route before planning a conduit bore through the mapped ground.
  • Airport service: A utility route near Lockett Airport needs its precise location and access shown on the plan before we set the bore path.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

How do I get a quote for a bore near 17th Street in Lockett?

A map pin matters near 17th Street because the route can change which buried lines or roadway edges a bore meets. Send the Lockett address or pin, what will go underground, the pipe or conduit size and the footage. A sketch or plans help us check the path against US 70, FM 433 or the local street network.

The job scope sets the price, including bore length, pipe or conduit size, soil, crossings and access. Lockett’s sandy surface and sandy clay loam below can affect reaming and fluid needs. A route beneath US 70 adds highway permit and cover planning, while pavement, exposed utilities, pits, excavator time and sand backfill also shape the work. Mobilization matters because Lockett is 181 road miles from Yukon. High profile or emergency timing can change the scope too.

Questions people ask about boring in Lockett

Does Trinity take directional boring work in Wilbarger County near Lockett, and who staffs it?

Yes, Trinity Boring Solutions takes work in Lockett and across Texas. Our crews do the work, with support from satellite yards run by partner drilling contractors we have personally vetted. You work with Trinity from the first call through the bore log, whether the job is near US 70 or on a local street.

How old are buried lines near 7th Street in Lockett, and what does that mean for a replacement bore?

Lockett’s housing is mostly older: the American Community Survey 2019 to 2023 estimates put the median year built at 1951 and show 87% built before 1960. That age can make replacement work near 7th Street a practical need, but it does not establish the age of any specific buried line. We expose marked utilities before drilling nearby.

What ground will a bore meet in Lockett’s Miles soil?

The USDA soil survey maps Miles soils across 93% of Lockett, with sandy clay loam under about 94% of the mapped area at 40 inches. The surface is mostly loamy fine sand. Sand can loosen behind a drill, while the clay richer layer can hold the hole and grip pipe, so crews plan fluid and reaming for both.

Is a bore in Lockett likely to hit rock?

Bedrock is not mapped within the top five feet of Lockett, but that does not rule out deeper rock. The geologic map includes Quartz Sand Decomposition Residuum of Cenozoic age and Early Permian sedimentary material. Locally cemented material could slow a bore, so mapped soil alone cannot settle the conditions at a specific route.

Who handles a bore permit under US 70 in Lockett: TxDOT Wichita Falls District?

TxDOT reviews a utility permit for work in the US 70 right of way through its Wichita Falls District. The utility owner files in RULIS, not the drilling contractor; we prepare the bore plan and profile for that filing. The permit sets the approved conditions and may specify cover depth for the crossing.

Which electric company owns the line for a conduit bore in Wilbarger County near Lockett?

The specific line owner must be confirmed for the Lockett address before a conduit bore is planned. AEP Texas North, Oncor Electric Delivery Company, Southwestern Public Service and Tri-County Electric Cooperative report service in Wilbarger County, but those reports do not identify the provider at every address. The confirmed owner can provide the conduit requirements.

Does Trinity cover Vernon and rural sites outside Lockett?

Yes, Trinity takes work in Lockett, Vernon and other Texas locations, including rural sites outside the mapped community boundary. Vernon is 6.2 miles northeast and is the Wilbarger County seat. The route, access and buried lines still need to be checked for each address, whether it is near US 70 or farther out.

How early should I call Texas811 for work near 17th Street in Lockett, and what if marks move?

For a bore near 17th Street, make the Texas811 locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before the start. For a Wilbarger County bore request, if the start moves more than 14 days past the original notice, we submit a new request. Before continuing a bore near 17th Street in Lockett, we have worn or moved marks refreshed through Texas811.

What affects the price of a directional bore under US 70 in Lockett?

The price depends on the Lockett job’s length, pipe or conduit size, ground, crossings and access. Sandy clay loam and the loamy fine sand surface affect drilling conditions. A US 70 crossing brings permit and cover planning; pavement, utility potholing, pits and equipment time also matter. Mobilization is another factor because Lockett is 181 road miles from Yukon.

Where the Lockett facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Lockett

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Lockett, Texas

Type the address of your job in Lockett. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Lockett

All counties: Texas county list.