trinityboringsolutions.com

Crowell Texas Directional Boring: Rotan Clay, US 70 and Main Street

Quick Answer: Need to get beneath US 70 without opening the pavement? We do directional boring, also called horizontal directional drilling (HDD), in Crowell for routes under US 70 and other paved roads. Crowell is 204 road miles from our Yukon, Oklahoma office, and Main Street is one local route to consider for access and staging. The USDA soil survey maps heavy clay at about 40 inches, where sticky cuttings can load a reamer and grip pipe. We adjust the drilling fluid and ream in stages to manage that ground.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Crowell bores at a glance

  • County seat of Foard County, Texas. Population 733 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 204 miles, about 4.3 hours of driving.
  • Ground: Rotan soil is mapped on 54 percent of the area, with clay about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: US 70, Texas State Highway 6 and FM 98. State permit office: TxDOT Childress District.
  • Railroad track inside the boundary: none mapped.
  • Public water: City of Crowell, surface water bought from another system.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Which contractor handles directional boring near Main Street in Crowell?

Need a line beneath Main Street or another Crowell road without cutting the surface? Trinity Boring Solutions takes directional boring work in Crowell and across Texas. The Census Bureau Vintage 2024 estimate puts Crowell at 733 people. We install water, sewer, gas, electric conduit and fiber, including service routes along Commerce Street or 1st Street where a bore suits the line and site.

Our main office is in Yukon, Oklahoma, and Crowell work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our family business started in 1965, and since 1982 we have done directional boring for routes to Crowell, 204 road miles from our Yukon main office. For a Crowell route beneath US 70, our work ranges from 3/4 inch service lines to 48 inch casing, with bore lengths from 10 feet to 5,000 feet.

Trinity Boring Solutions branded compact directional drilling unit positioned beside a tree on a red dirt jobsite
Our compact directional drill set up beside a tree on a tight site. Photos on this page are from our jobs in Oklahoma and Texas.

What is Rotan soil like to bore through in Crowell?

The USDA soil survey maps Rotan soil across 54 percent of Crowell, with Wichita at 25 percent and Hollister at 20 percent. Clay loam makes up 95 percent of the mapped surface texture. At 40 inches, the survey maps clay across 75 percent of the area and clay loam across 25 percent, with an average clay content of 41 percent. Those are mapped patterns, not test borings. Around Main Street, the clay can stick to the reamer, so the bore plan needs to account for cleanup and pipe pull timing.

USDA soil survey, inside the Crowell city limitsWhat is mapped
Soil series mappedRotan 54 percent, Wichita 25 percent and Hollister 20 percent
Texture at the surfaceclay loam 95 percent and loam 5 percent
Texture about 40 inches downclay 75 percent and clay loam 25 percent
Engineering class about 40 inches downlean clay (CL) 79 percent and fat clay (CH) 21 percent
Average clay content about 40 inches down41 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches0 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel75 percent of the area

Bedrock is not mapped in the top five feet of Crowell, though deeper rock is not ruled out. Seasonal water table and flood prone soils are not mapped, so the survey does not indicate those as common constraints. High steel corrosion risk is mapped across 75 percent of the city, a concern to review for steel casing and tracer wire; the line owner selects materials. The mapped Quaternary deposit, undivided, is Cenozoic and includes sand, silt, clay and gravel, while Early Permian sedimentary rock is also mapped. Those units support checking actual ground as the bore advances.

How do we plan a bore through clay loam in Crowell, where Rotan, Wichita, and Hollister soils occur?

Crowell soil survey maps show heavy clay below the surface, so a bore near 1st Street needs a controlled fluid plan. We track the drill head and adjust the work to the ground we encounter.

  1. Use the Crowell route and mapped clay loam to plan entry and exit pits, then keep fluid pressure controlled so returns do not lift nearby pavement.
  2. Because heavy clay can stick to the reamer, use a thinner fluid mix with polymer and open the hole in stages near Main Street.
  3. With the pipe ready before the last ream, pull it the same day the hole opens so Crowell’s clay has less time to swell around it.
  4. Expose marked utilities along the Crowell bore path with hydrovac before drilling near them, then track depth and pitch from the surface as the bore advances.
Drilling fluid returns at the entry as the Vermeer D24x40 S3 drills a 385 foot sandstone rock bore in Guthrie, Oklahoma
Drilling fluid coming back to the entry pit as our Vermeer D24x40 drills a 385 foot bore in Guthrie, Oklahoma.

Where might a line need to go under US 70 in Crowell?

US 70, Texas State Highway 6 and FM 98 run within Crowell, so a route crossing one of them needs highway right of way planning. TxDOT rules call for boring or tunneling beneath existing highway pavement, with rural highway bores extending beneath all travel lanes. Main Street, Commerce Street and 1st Street are the longest named local streets. Their paved surfaces can remain uncut when the route and entry pits allow a bore beneath the road.

CrossingTypeMapped extentWho has a say
US 70US highway1.3 roadway miles insideState highway office
Texas State Highway 6State highway1.5 roadway miles insideState highway office
FM 98State highway1.2 roadway miles insideState highway office
Swipe the table sideways to see every column.

No railroad is mapped inside Crowell or within one mile outside its limits, so there is no mapped track route to plan around. No named streams are mapped in or within one mile of town, and no street crossings of named streams are mapped. The survey does map 2.51 miles of unnamed drainage inside the city, so a route near a drainage feature needs site review. With no lakes or ponds mapped within one mile, we plan Crowell crossings along US 70 around underground utility conflicts.

Who handles permits for a Crowell bore in Foard County?

Crowell is an incorporated city, so its city streets belong to the city itself. For work in the right of way of US 70, Texas State Highway 6 or FM 98, the line owner, not the driller, applies for a TxDOT utility permit through RULIS. The TxDOT Childress District reviews it. We prepare the bore plan and profile for the owner’s application and work under its permit. TxDOT cover rules call for 60 inches for electric and communication lines at crossings, 60 inches for water crossings and 60 inches for pressurized sewer crossings. The permit can set other depths.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Who owns lines near the City of Crowell water system?

The City of Crowell public water system uses purchased surface water and serves 914 people through 505 service connections. That gives a water service bore near Main Street a specific local owner to confirm. AEP Texas North, Southwestern Public Service, South Plains Electric Cooperative and Tri-County Electric Cooperative report electric service in Foard County. Those county reports do not identify the provider at every address, so we confirm the line owner before planning an electric conduit bore.

Line ownerWhat it isSourceSize
City of CrowellPublic water systemSurface water bought from another system505 connections, 914 people served
AEP Texas North, Southwestern Public Service, South Plains Electric Cooperative and Tri-County Electric CooperativeElectric utilities reporting service in Foard CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Crowell’s median housing year at 1961; 46 percent of homes were built before 1960, and 5 percent in 2000 or later. That mix can mean a replacement route along Commerce Street differs from a new service to a newer home. Before drilling near a marked water or electric line, we hydrovac pothole it to see its depth; locate paint shows position, not depth.

Large HDPE conduit reels staged on a Rotate A Reel trailer for a fiber and utility installation in Oklahoma
HDPE conduit reels on a reel trailer for a fiber and utility installation in Oklahoma.

How far is Crowell from Lockett and our Yukon office?

Crowell is the Foard County seat, covers 1.89 square miles and sits at an elevation of 1,475 feet. The ZIP code is 79227. Lockett is 21.2 miles east, Quanah is 21.6 miles north, Chillicothe is 22.3 miles northeast, and Vernon is 26.8 miles northeast and the nearest larger city. The drive from our Yukon, Oklahoma office is 204 road miles and 4.3 hours. That distance is part of planning equipment and crew mobilization for a Crowell bore.

Places near Crowell

What kinds of bores could come up near 1st Street in Crowell?

  • Highway crossing: A bore beneath US 70 keeps the existing pavement uncut, with the route and cover planned for TxDOT review.
  • Street service: A water or sewer connection near Commerce Street can run below the road surface when access allows pits on each side.
  • Electric conduit: Near 1st Street, we first confirm the address specific line owner among the utilities reporting service in Foard County.
  • Water service: A route near the City of Crowell system needs its existing water connections located and exposed before the drill approaches.
  • Drainage route: A bore near one of Crowell’s mapped unnamed drainage channels needs a planned path that accounts for the channel and site conditions.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What drives the price of a Crowell bore near Main Street?

For a route near Main Street, start with the address or map pin so we can locate the proposed path. Tell us what will go underground, such as a water line or fiber conduit, then give the pipe or conduit size and footage. A sketch or plans help show how the route relates to US 70, access points and existing lines.

The price follows the work scope. Ground matters: Crowell’s mapped heavy clay can affect reaming and fluid handling. Crossings matter too, including pavement on US 70, other utilities to expose, and any drainage route. Logistics matter because Crowell is 204 road miles from Yukon. Pipe size, length, pits, excavator time, sand backfill, concrete or pavement, and high profile or emergency timing can also change the plan.

Questions people ask about boring in Crowell

Does Trinity Boring Solutions take jobs in Crowell and Foard County?

Yes. We take directional boring jobs in Crowell and across Texas, including routes in Foard County. Our main office is in Yukon, and the work is handled by our own crews or vetted partner drilling contractors. From the first call through the bore log, we coordinate Crowell work along Texas State Highway 6, regardless of which crew is on site.

Who supplies electric lines in Foard County near Crowell, and who confirms conduit specs?

AEP Texas North, Southwestern Public Service, South Plains Electric Cooperative and Tri-County Electric Cooperative report electric service in Foard County. That list does not identify the provider at every Crowell address. We confirm the actual line owner before planning a conduit bore, and the owner confirms the conduit requirements for its line near streets such as Main Street.

Does the city or county control 1st Street in Crowell, and can we bore beneath it?

Crowell is incorporated, so 1st Street is a city street. A bore can pass beneath the street without cutting its surface when the route and pit locations work. We check marked utilities along the path first, since the mapped street layout alone does not show buried line depth.

Do older homes near Commerce Street mean replacement bores in Crowell?

They can mean older buried services are candidates for replacement, but the home age does not establish the age or condition of any particular line. The American Community Survey 2019 to 2023 estimates put the median housing year at 1961. A replacement bore near Commerce Street still needs the route, line size and existing utilities checked.

Does Rotan soil in Crowell corrode steel, and what pipe should I use?

The USDA soil survey maps high steel corrosion risk across 75 percent of Crowell, including areas mapped as Rotan soil. The line owner should review casing and tracer wire material or coatings for the specific installation. HDPE does not have the same soil corrosion concern, but the owner selects the line materials.

What ground will a bore meet in Rotan soil around Crowell?

The USDA soil survey maps Rotan soil across 54 percent of Crowell, and clay is mapped across 75 percent of the area at 40 inches. The heavy clay can stick to a reamer and grip pipe. We plan staged reaming and fluid handling for that mapped condition, while checking actual ground during the bore.

How early should I call Texas811 for a Crowell bore near Main Street?

For a Main Street bore, request a locate at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before the start. For Crowell work in Foard County, Texas811 describes that as at least two working days, which we allow before excavation. If the start slips more than 14 days past the original notice, make a new request; worn or moved marks must be refreshed through Texas811.

How far is Crowell from Yukon, and does Vernon change the job?

Crowell is 204 road miles and a 4.3 hour drive from our Yukon, Oklahoma office. Vernon is 26.8 miles northeast and is the nearest larger city. Distance affects how we plan mobilization for a Crowell job, while the route, access and equipment needs determine the actual work plan.

What affects the price of a Crowell bore under US 70?

The scope drives the price, not one feature alone. For a US 70 route, the work can depend on bore length and size, pavement, TxDOT requirements, marked utilities to expose, and pit or excavator needs. Crowell’s mapped heavy clay and its 204 road miles from Yukon also factor into drilling and mobilization.

Where the Crowell facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Crowell

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Crowell, Texas

Type the address of your job in Crowell. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Crowell

All counties: Texas county list.