trinityboringsolutions.com

Lone Star Texas Directional Boring: Cuthbert Soil, Barnes Creek and Texas and Northern Railway

Quick Answer: Lone Star is a small incorporated city in Morris County, so its city streets belong to the city. We take directional boring, also called horizontal directional drilling (HDD), for routes under or beside US 259 and Lone Star streets in Texas. The 311 road miles from our Yukon, Oklahoma main office matter for mobilization near Texas and Northern Railway. Cuthbert soil covers 41 percent of the mapped area, and its fine sandy surface over clayier soil calls for controlled fluid and staged reaming.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Lone Star bores at a glance

  • Incorporated city in Morris County, Texas. Population 1,407 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 311 miles, about 6.2 hours of driving.
  • Ground: Cuthbert soil is mapped on 41 percent of the area, with sandy clay loam about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 41 percent of the area.
  • Highways inside the boundary: US 259, FM 250 and FM 729. State permit office: TxDOT Atlanta District.
  • Railroad track inside the boundary: Texas and Northern Railway, with 1 mapped street and rail crossings.
  • Named streams inside the boundary: Barnes Creek.
  • Public water: City of Lone Star, surface water bought from another system.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Does anyone do directional boring near Barnes Creek in Lone Star?

Trinity Boring Solutions takes directional boring work in Lone Star, a small incorporated city in Morris County whose city streets belong to the city. The Census Bureau Vintage 2024 estimate for Lone Star is 1,407, a population figure we consider when planning underground work. A water, sewer, gas, electric conduit or fiber bore could follow a service route off Main Street or connect along Industrial Boulevard, depending on the project.

Our main office is in Yukon, Oklahoma, and Lone Star work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. For planning near Main Street in Lone Star, we offer 3/4 inch service lines through 48 inch casing, with bore lengths from 10 feet to 5,000 feet. The family business started in 1965, and directional boring has been part of our work since 1982; on US 259 the route and line size shape the plan.

Trinity Boring Solutions branded compact directional drilling unit positioned beside a tree on a red dirt jobsite
Our compact directional drill set up beside a tree on a tight site. Photos on this page are from our jobs in Oklahoma and Texas.

What is Cuthbert soil like to bore in Lone Star?

Cuthbert is the most common mapped soil series in Lone Star, covering 41 percent of the area; Kirvin covers 26 percent and Bowie 24 percent. The USDA soil survey maps fine sandy loam at the surface across 47 percent, while sandy clay loam makes up 70 percent of the texture at about 40 inches and clay 22 percent. That change with depth matters: a sandy surface can cut readily, while the clayier interval can grip a reamer and make fluid control important.

USDA soil survey, inside the Lone Star city limitsWhat is mapped
Soil series mappedCuthbert 41 percent, Kirvin 26 percent, Bowie 24 percent and Tenaha 4 percent
Texture at the surfacefine sandy loam 47 percent, gravelly fine sandy loam 24 percent and very fine sandy loam 22 percent
Texture about 40 inches downsandy clay loam 70 percent, clay 22 percent and clay loam 4 percent
Engineering class about 40 inches downlean clay (CL) 52 percent, clayey sand (SC) 22 percent and fat clay (CH) 22 percent
Average clay content about 40 inches down32 percent
Bedrock mapped within 60 inches41 percent of the area (0 percent hard rock, 41 percent weathered rock)
Seasonal water table within 60 inches26 percent of the area
Flood prone soils1 percent of the area
High corrosion risk for uncoated steel46 percent of the area

The USDA soil survey maps weathered bedrock within 60 inches across 41 percent of Lone Star, with a typical depth of 43 inches. Seasonal water table is mapped within 60 inches across 26 percent, while flood prone soils cover 1 percent. Across Lone Star, mapped high steel corrosion risk covers 46 percent, so we consider casing and tracer wire materials for each bore. The map includes Cenozoic Quartz Sand Decomposition Residuum and Lutetian Queen City Sand; weathered material may slow drilling, and the soil survey is not a site specific test.

What does it take to bore Lone Star’s sandy clay loam?

In Lone Star, sandy clay loam at about 40 inches sits beneath a mostly fine sandy loam surface. We match fluid and reaming to that shift, then track the head and log its depth and pitch near local lines.

  1. Cuthbert soil is common in Lone Star, and clayier ground at depth can hold the hole; we use staged reaming and adjust fluid to limit clay buildup.
  2. Quartz Sand Decomposition Residuum includes quartz sand, so we prepare for loose material and have the pipe ready before the final ream.
  3. With weathered bedrock mapped within 60 inches in parts of Lone Star, we use a soil bit where suitable and allow for slower progress.
  4. Near Lakeshore Drive, a walkover locator follows the drill head from the surface while we record depth and pitch as the bore advances.
Vermeer D24x40 S3 Navigator and water truck at the entry of a 385 foot sandstone rock bore above the wetland in Guthrie, Oklahoma
Our Vermeer D24x40 and water truck at the entry of a 385 foot sandstone rock bore in Guthrie, Oklahoma.

What does a bore have to cross on Main Street in Lone Star?

US 259, FM 250 and FM 729 run inside Lone Star, so a route crossing their rights of way needs highway planning as well as a street level layout. Main Street is the longest named street at 2.08 miles in the city; Industrial Boulevard runs 1.12 miles and Lakeshore Drive 0.71 miles. A bore can pass below pavement rather than cutting across it, but the route, utilities and required cover determine where the entry and exit pits fit.

CrossingTypeMapped extentWho has a say
US 259US highway3.4 roadway miles insideState highway office
FM 250State highway1 roadway miles insideState highway office
FM 729State highway0.6 roadway miles insideState highway office
Texas and Northern RailwayRailroad0.16 track miles insideThe railroad
Barnes CreekStream0.11 channel miles insideChecked for Corps of Engineers jurisdiction
Brutons CreekStream nearby0.1 miles outsideChecked for Corps of Engineers jurisdiction
Peacock CreekStream nearby0.2 miles outsideChecked for Corps of Engineers jurisdiction
South Union CreekStream nearby0.4 miles outsideChecked for Corps of Engineers jurisdiction
Big Cypress CreekStream nearby0.7 miles outsideChecked for Corps of Engineers jurisdiction
Lake O the PinesLake or pond1,420 acres, nearbyChecked for Corps of Engineers jurisdiction
Ellison Creek ReservoirLake or pond1,371 acres, insideChecked for Corps of Engineers jurisdiction
Upper Barnes Creek DamLake or pond228 acres, nearbyChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

The Texas and Northern Railway has 0.16 track miles inside Lone Star, and one mapped street and rail crossing makes track coordination relevant to a route there. Barnes Creek has 0.11 channel miles in the city; no street crossings of named streams are mapped. Ellison Creek Reservoir is inside the limits, while Lake O the Pines, Upper Barnes Creek Dam and Barnes Creek Reservoir are nearby but outside them. A creek or lake route needs water crossing review during planning.

Whose permission does a Lone Star bore in Morris County need?

Lone Star city streets belong to the city, while work within US 259, FM 250 or FM 729 right of way needs a TxDOT utility permit. The TxDOT Atlanta District reviews it, and the utility owner, not the drilling contractor, files through RULIS; we prepare the route details for the owner’s application and work under its permit. For electric or communication lines, the highway crossing cover is at least 60 inches below the lowest point of crossed grade; water crossings also need 60 inches, and pressurized sewer crossings need 60 inches. A crossing under Texas and Northern Railway requires its agreement. Barnes Creek or a lake crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

What is already in the ground near the City of Lone Star system?

The local government owned City of Lone Star public water system uses purchased surface water and reports 850 service connections serving 1,400 people. For electric service in Morris County, Southwestern Electric Power, Bowie-Cass Electric Cooperative and Upshur Rural Electric Cooperative report service; that list does not identify the provider at each address. We confirm the line owner before planning an electric conduit bore near Main Street or US 259.

Line ownerWhat it isSourceSize
City of Lone StarPublic water systemSurface water bought from another system850 connections, 1,400 people served
Southwestern Electric Power, Bowie-Cass Electric Cooperative and Upshur Rural Electric CooperativeElectric utilities reporting service in Morris CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Lone Star’s median housing year at 1969; 39 percent of units were built before 1960, 53 percent from 1960 to 1999 and 8 percent in 2000 or later. That mix can mean replacement work near older homes as well as new services. Along Lakeshore Drive, we hydrovac expose each marked utility on the bore path before drilling near it, since surface paint shows location but not depth.

Exposed underground utility line in a hand dug potholing pit before a directional bore in Oklahoma
An existing utility line exposed in a pothole before a directional bore in Oklahoma.

What is near Lone Star, including Gilmer?

Lone Star is in Morris County at an elevation of 305 feet, and its land area is 1.98 square miles. For Lone Star work, we use ZIP code 75668 to identify the service area when coordinating bore planning. Hughes Springs lies 6.1 miles northeast, Daingerfield 6.3 miles north, Avinger 9.5 miles east, Ore City 9.6 miles south and Pittsburg 15.5 miles west. Daingerfield is the county seat; Gilmer, the nearest larger city, is 19.9 miles southwest. From our Yukon yard, the drive is 311 road miles and 6.2 hours, which affects mobilization for work near US 259.

Places near Lone Star

What kinds of bores come up along Industrial Boulevard in Lone Star?

  • Highway crossing: A route below US 259 needs a bore plan that accounts for TxDOT cover and keeps the existing highway surface intact.
  • Water service: A connection near the City of Lone Star system may need a route sized for the proposed service and existing lines.
  • Fiber conduit: Along Industrial Boulevard, a fiber route can pass beneath pavement with marked utilities exposed before drilling approaches them.
  • Creek crossing: A proposed route near Barnes Creek needs channel depth planning and a check for federal water jurisdiction during planning.
  • Rail crossing: A bore beneath the Texas and Northern Railway needs the track owner’s agreement and its crossing conditions.
  • Street service: A bore near Main Street can avoid an open cut across pavement when the route and entry pits allow it.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What drives the price of a Lone Star bore near US 259?

For a quote near US 259 or Main Street, send the address or map pin first, then identify what is going in the ground. Give us the pipe or conduit size and the footage; a sketch or plans help show the route. If the line crosses the Texas and Northern Railway or approaches Barnes Creek, include that in the route information.

Price follows the work involved, not just the length. Cuthbert soil and clayier material at depth affect drilling and reaming; a US 259 crossing or the Texas and Northern Railway adds route coordination. We also account for pipe or conduit size, utilities to expose, pavement, creek or drainage crossings, pits, excavator time and sand backfill. The 311 road miles from Yukon affect mobilization, while high profile or emergency work can change the scope.

Questions people ask about boring in Lone Star

Does Trinity Boring Solutions take jobs in Lone Star and Morris County, and who staffs them?

Yes. We take directional boring work in Lone Star and across Texas, including routes near Main Street and US 259. Our own crews handle the work, and partner drilling contractors we have personally vetted may staff from satellite yards. For Lone Star requests, we work with Trinity from the first call through the bore log, whatever crew handles the work.

What does a Lone Star bore under the Texas and Northern Railway need?

A bore under the Texas and Northern Railway needs an agreement from the railroad that owns the track. On Lone Star crossings, our agreement spells out casing, depth and flagging details. There are 0.16 track miles inside Lone Star, so a route near the mapped street and rail crossing should account for railroad coordination early.

Can a Lone Star utility line be bored under Barnes Creek?

A line may be routed beneath Barnes Creek if the route and ground conditions allow it. The channel runs 0.11 miles inside Lone Star, and a creek crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning. We plan depth to pass below the channel and avoid cutting the creek banks.

Who runs Lone Star’s public water system, and where does its water come from?

The local government owns the City of Lone Star public water system, which uses purchased surface water. It reports 850 service connections and serves 1,400 people. For a bore near Main Street, the system’s presence means the route should be checked for existing water lines before drilling.

Which electric provider should I check for a Lone Star job in Morris County?

Southwestern Electric Power, Bowie-Cass Electric Cooperative and Upshur Rural Electric Cooperative report electric service in Morris County. The provider at a particular address near Industrial Boulevard still needs to be confirmed with the line owner before planning a conduit bore. That owner can also confirm the conduit specifications for its line.

Who controls streets in Lone Star, and can a bore avoid cutting Lakeshore Drive?

Lone Star is an incorporated city, so its city streets belong to the city itself. A bore can pass beneath Lakeshore Drive without opening the pavement when the route and pit locations allow it. Marked utilities along the path are exposed before the drill approaches them.

Does Trinity cover Hughes Springs and rural sites outside Lone Star?

Yes. We take work in nearby Hughes Springs, 6.1 miles northeast of Lone Star, and at rural sites outside the city limits. Our Yukon office is 311 road miles away, so the distance is part of planning mobilization for a route near FM 250 or elsewhere in the area.

How early should I call Texas811 for a Lone Star bore along Main Street?

For a bore along Main Street, Texas law requires a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before it. For a Lone Star start delayed more than 14 days beyond the original notice, we submit a new request. If marks are worn or moved on a Lone Star route, we request refreshes through Texas811 before work continues.

What affects the cost of a directional bore in Lone Star near US 259?

The route, footage, pipe or conduit size, soil, pavement and the utilities that need exposure all affect the price near US 259. A crossing of the Texas and Northern Railway or Barnes Creek can add planning work. Mobilization also reflects the 311 road miles from Yukon, along with pits, excavator time and any sand backfill.

Where the Lone Star facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Lone Star

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Lone Star, Texas

Type the address of your job in Lone Star. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Lone Star

Same county: Naples · Omaha. All counties: Texas county list.