Marlin Texas Directional Boring: Wilson Clay, Highway 6 and Union Pacific
Quick Answer: The City of Marlin owns the surface water system; Entergy Texas, Oncor Electric Delivery Company, Heart of Texas Electric Cooperative and Navasota Valley Electric Cooperative report service in Falls County, so we verify the line owner before a Live Oak Street bore. Trinity Boring Solutions does directional boring, also called horizontal directional drilling (HDD), in Marlin, Texas, including routes beneath Texas State Highway 6. Marlin is 324 road miles from our Yukon, Oklahoma main office, a factor in mobilizing for Union Pacific track work. Wilson soil is heavy clay that can cling to tooling, so staged reaming and controlled fluid returns matter.
Marlin bores at a glance
- County seat of Falls County, Texas. Population 5,572 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 324 miles, about 6.3 hours of driving.
- Ground: Wilson soil is mapped on 44 percent of the area, with clay about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 11 percent of the area.
- Highways inside the boundary: Texas State Highway 6, Texas State Highway 7, FM 2117, FM 147 and FM 2308. State permit office: TxDOT Waco District.
- Railroad track inside the boundary: Union Pacific, with 17 mapped street and rail crossings.
- Named streams inside the boundary: Bean Branch.
- Public water: City of Marlin, surface water.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who handles directional boring in Marlin, Falls County?
The City of Marlin owns the surface water system, and electric service is reported in Falls County by Entergy Texas, Oncor Electric Delivery Company, Heart of Texas Electric Cooperative and Navasota Valley Electric Cooperative. We verify the line owner before planning a bore near Live Oak Street. The Census Bureau Vintage 2024 estimate puts Marlin at 5,572 residents. Our crews can place water, sewer, gas, electric conduit or fiber beneath streets such as Gresham Street or along routes serving the city.
Our main office is in Yukon, Oklahoma, and Marlin work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We handle 3/4 inch service lines through 48 inch casing, with bore lengths from 10 feet to 5,000 feet. That range can suit a short service route by Gresham Street or a longer utility run. The family business began in 1965, and we have done directional boring since 1982.

What does the Wilson soil survey show beneath Marlin?
The USDA soil survey maps Wilson soil across 44% of Marlin. Wilson loam, 0 to 1 percent slopes, covers 20%, and Wilson silty clay loam, 0 to 1 percent slopes, covers another 20%. At about 40 inches below the surface, clay is mapped across 66% of the area, with average clay content of 47%. Heavy clay is mapped at that depth across 90%. We treat Marlin’s mapped patterns as planning references, not as test borings. On a Wilson route, sticky cuttings can collect on the reamer and clay can grip the pipe, so the ground calls for controlled fluid and staged reaming.
| USDA soil survey, inside the Marlin city limits | What is mapped |
|---|---|
| Soil series mapped | Wilson 44 percent, Houston Black 12 percent, Crockett 11 percent, Heiden 9 percent and Ships 6 percent |
| Texture at the surface | clay 29 percent, silty clay loam 24 percent and loam 20 percent |
| Texture about 40 inches down | clay 66 percent, silty clay loam 20 percent and sandy clay loam 5 percent |
| Engineering class about 40 inches down | fat clay (CH) 90 percent, lean clay (CL) 5 percent and clayey sand (SC) 4 percent |
| Average clay content about 40 inches down | 47 percent |
| Bedrock mapped within 60 inches | 11 percent of the area (0 percent hard rock, 11 percent weathered rock) |
| Seasonal water table within 60 inches | 2 percent of the area |
| Flood prone soils | 4 percent of the area |
| High corrosion risk for uncoated steel | 90 percent of the area |
The USDA soil survey maps weathered bedrock within 60 inches across 11% of Marlin; hard bedrock is not mapped within that depth. Seasonal water tables within 60 inches are mapped across 2%, and flood prone soils across 4%. High steel corrosion risk is mapped across 90%, so the line owner should consider casing and tracer wire materials; HDPE avoids that steel concern. The geologic map names Pecan Gap Chalk of Campanian age, with limestone, carbonate, sandstone and claystone. A route still needs field checks because the map is not a site boring.
How do we bore through clay in Marlin while treating mapped patterns as references, not test borings?
Marlin’s Wilson soil and heavy clay share call for a bore plan that controls fluid and keeps the hole stable. We match the reaming sequence to the route and check for marked lines before the drill approaches them.
- On a Wilson soil route, we use thinner fluid and polymer, then ream in stages so sticky clay is less likely to ball on the reamer or grip the pipe.
- Where Marlin’s heavy clay is mapped, we watch fluid returns closely; pressure that builds under a Live Oak Street pavement crossing can lift the surface.
- Before drilling near a marked line by the City of Marlin water system or an electric route, we hydrovac pothole it because locate paint does not show depth.
- As a bore advances toward Bean Branch or a Union Pacific crossing, we track the head from the surface and log its depth and pitch.

Where might a Marlin bore pass under Live Oak Street?
Texas State Highway 6 has 4.9 mapped roadway miles inside Marlin, and Texas State Highway 7 has 2.2. FM 2117, FM 147 and FM 2308 also run within the city limits. No highway is listed within 1.5 miles outside the limits. Live Oak Street is the longest named street at 1.44 miles, followed by Gresham Street at 1.36 and Ward Street at 1.33. Those routes can put a bore beneath pavement or driveways, where the entry and exit pits need to fit clear of the traveled surface.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| Texas State Highway 6 | State highway | 4.9 roadway miles inside | State highway office |
| Texas State Highway 7 | State highway | 2.2 roadway miles inside | State highway office |
| FM 2117 | State highway | 1.4 roadway miles inside | State highway office |
| FM 147 | State highway | 1.4 roadway miles inside | State highway office |
| FM 2308 | State highway | 0.4 roadway miles inside | State highway office |
| Union Pacific | Railroad | 2.78 track miles inside | The railroad |
| Bean Branch | Stream | 1.19 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Mc Cullough Slough | Stream nearby | 0.2 miles outside | Checked for Corps of Engineers jurisdiction |
Union Pacific has 2.78 track miles inside Marlin, on the Fort Worth Subdivision. The map shows 17 street and rail crossings, so a route near the tracks needs coordination with the railroad. Bean Branch runs 1.19 channel miles in the city, and one street crossing of a named stream is mapped. Mc Cullough Slough is 0.2 miles from the city limits. Our Marlin planning reflects the map showing no lakes or ponds within one mile. A Bean Branch crossing needs depth planning under the channel and a jurisdiction check during planning.
Whose approval does a Marlin bore near Union Pacific need?
Marlin is incorporated, so its public streets belong to the city. A bore in Texas State Highway 6, Texas State Highway 7 or an FM road right of way needs a TxDOT utility permit, reviewed by the Waco District. The utility owner files through TxDOT’s RULIS system; we prepare the bore plan and profile for that filing and work under the owner’s permit. A crossing of Union Pacific track needs an agreement from the railroad, which sets the crossing conditions. For a Bean Branch crossing, planning checks whether the U.S. Army Corps of Engineers has jurisdiction.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Who owns lines serving Marlin, including the City of Marlin?
The City of Marlin public water system uses surface water and reports 2,865 service connections serving 5,516 people. Electric service reported in Falls County includes Entergy Texas, Oncor Electric Delivery Company, Heart of Texas Electric Cooperative and Navasota Valley Electric Cooperative. That list does not identify the provider at every Marlin address. Before a conduit route near Gresham Street is laid out, we confirm the electric line owner and expose marked utilities along the bore path.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of Marlin | Public water system | Surface water | 2,865 connections, 5,516 people served |
| Entergy Texas, Oncor Electric Delivery Company, Heart of Texas Electric Cooperative and Navasota Valley Electric Cooperative | Electric utilities reporting service in Falls County | EIA Form 861 | Confirm the line owner by address |
We use the American Community Survey 2019 to 2023 five year estimates showing Marlin’s median housing year at 1968 as context for underground planning. The estimates place 44% of housing units before 1960, 48% from 1960 to 1999 and 8% in 2000 or later. Older housing can mean replacement routes as well as new service connections, but the age of a home does not establish the condition of a buried line. Near Live Oak Street, we hydrovac marked utilities on the bore path before drilling close to them; paint shows position, not depth.

Does Trinity cover Marlin and nearby Robinson?
Marlin is the Falls County seat, at elevation 394 feet, and covers 4.52 square miles. The city uses ZIP code 76661. Chilton is 10.0 miles west; Lott is 10.9 miles southwest; Golinda is 11.3 miles west; Riesel is 11.9 miles north; and Kosse is 15.6 miles east. Robinson, the nearest larger city, is 16.8 miles northwest. We take work in Marlin and elsewhere across Texas, including rural routes outside city limits. The Yukon yard is 324 road miles away, a 6.3 hour drive, which matters when planning mobilization.
Places near Marlin
- Directional boring in Chilton: 10 miles west
- Directional boring in Lott: 10.9 miles southwest
- Directional boring in Golinda: 11.3 miles west
- Directional boring in Riesel: 11.9 miles north
- Directional boring in Kosse: 15.6 miles east
- Directional boring in Robinson: 16.8 miles northwest
What would we bore near Bean Branch in Marlin?
- Highway crossing: A bore beneath Texas State Highway 6 keeps travel lanes uncut, with the route planned for the TxDOT utility permit.
- Water service: A connection tied to the City of Marlin system can pass beneath Live Oak Street after marked lines are exposed.
- Rail crossing: A route under Union Pacific track needs the railroad’s crossing agreement before casing, depth and flagging are set.
- Creek crossing: A Bean Branch bore needs a path planned below the channel and a jurisdiction check during planning.
- Fiber route: Conduit near Gresham Street can pass beneath pavement rather than opening the street, with marked utilities exposed before drilling.
- Rural service: Routes toward Chilton can carry water, sewer, gas or electric conduit beyond Marlin’s city streets.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
How can I price a Marlin bore near Texas State Highway 6?
A map pin matters near Texas State Highway 6 because the exact side of the road and the space for entry and exit pits shape the route. Send the address or pin, what will go underground, and the pipe or conduit size and footage. A sketch or plans help us see nearby crossings, including Union Pacific track or Bean Branch.
A clear route across Wilson soil with few marked utilities is simpler to plan than a bore beside Texas State Highway 6 or Union Pacific track. Length and pipe size matter, as do the clay and any rock, utilities to expose, pavement, creek crossings, pit space, excavator time and sand backfill. The 324 road miles from Yukon affect mobilization for Marlin work. High profile or emergency work can also change the planning needs.
Questions people ask about boring in Marlin
Does Trinity take directional boring work in Marlin, Falls County, and how are crews assigned?
Yes. Trinity takes directional boring work in Marlin and across Texas. Our main office is in Yukon, and work is handled by our own crews or crews from vetted partner drilling contractors working from satellite yards. You work with Trinity from the first call through the bore log, including on a route near Live Oak Street.
What does older housing near Gresham Street mean for a Marlin replacement bore?
Marlin’s median housing year is 1968 in the American Community Survey 2019 to 2023 estimates. The age of nearby housing can make replacement work a consideration, but it does not tell us the condition or location of a buried line near Gresham Street. We locate and expose marked utilities before drilling close to them.
Can Wilson soil in Marlin corrode steel, and what pipe should we use?
The USDA soil survey maps high steel corrosion risk across 90% of Marlin. The line owner should consider casing and tracer wire materials for a Wilson soil route. HDPE does not share the steel corrosion concern. The survey is a mapped soil pattern, so the route and material choice still need review for the specific job.
What ground will a Marlin bore pass through in Wilson soil?
Wilson soil covers 44% of Marlin, and clay is mapped across 66% at about 40 inches below the surface. Heavy clay is mapped across 90% at that depth. Sticky clay can gather on the reamer and grip pipe, so we plan staged reaming and watch fluid returns along the route.
Is rock mapped within five feet of a Marlin bore?
The USDA soil survey maps weathered bedrock within 60 inches across 11% of Marlin; hard bedrock is not mapped within that depth. That does not establish what a particular bore will encounter deeper down. The geologic map also names Pecan Gap Chalk, so route conditions need to be checked for the specific site.
Who approves a Marlin bore under Texas State Highway 6?
TxDOT reviews a utility permit for work in the Texas State Highway 6 right of way through its Waco District. The utility owner submits the application in RULIS, while we prepare the bore plan and profile and work under the permit issued to that owner. Highway pavement is bored or tunneled beneath, not open trenched without district approval.
Does Trinity serve Marlin, Chilton and rural sites outside the city?
Yes. Trinity takes work across Texas, including Marlin, nearby Chilton and rural sites beyond city limits. Chilton is 10.0 miles west of Marlin. The Yukon main office is 324 road miles from Marlin, so distance is part of planning mobilization for a route outside town.
How far ahead should I request a locate for a Marlin bore on Live Oak Street?
For a Live Oak Street bore, Texas811 needs the locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays. The request cannot be made earlier than 14 days before the start. If the start slips more than 14 days past the original notice, make a new request; worn or moved marks must be refreshed through Texas811 before work continues.
What affects the cost of a Marlin directional bore near Texas State Highway 6?
The route and scope determine the price. Length, pipe size, Wilson clay, utilities to expose, pavement, pits, creek crossings and equipment time all matter. A Texas State Highway 6 or Union Pacific crossing adds planning needs, and Marlin’s 324 road miles from Yukon affect mobilization. High profile or emergency work can also affect the job scope.
Where the Marlin facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Marlin
- U.S. Census Bureau, TIGER/Line 2024: Marlin boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Marlin
- U.S. Census Bureau, American Community Survey 2019 to 2023: Marlin housing units and year built
- Macrostrat geologic map compilation: map units under Marlin
- U.S. EPA Safe Drinking Water Information System: public water systems serving Marlin
- U.S. Department of Transportation, North American Rail Network: track owners in Falls County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Falls County
- U.S. Geological Survey, Elevation Point Query Service: Marlin elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Marlin
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Marlin
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Marlin, Texas
Type the address of your job in Marlin. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Marlin
Same county: Rosebud. All counties: Texas county list.
