Martindale Texas Directional Boring: Lewisville Silty Clay, San Marcos River, Highway 80
Quick Answer: Need a line beneath a Martindale road or the San Marcos River without cutting across it? We take directional boring work in Martindale, Texas, also called horizontal directional drilling (HDD), for crossings such as Texas State Highway 80. The Yukon, Oklahoma main office is 439 road miles away, and the Union Pacific track is 0.9 miles outside the city limits. Lewisville silty clay is common here and can cling to the reamer or grip pipe. We adjust the fluid and ream in stages for ground like that.
Martindale bores at a glance
- Incorporated city in Caldwell County, Texas. Population 1,266 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 439 miles, about 8.3 hours of driving.
- Ground: Lewisville soil is mapped on 53 percent of the area, with silty clay about 40 inches down.
- Rock: no bedrock is mapped in the top 60 inches.
- Highways inside the boundary: Texas State Highway 80, FM 1979, Texas State Highway 142 and FM 1984. State permit office: TxDOT Austin District.
- Railroad track inside the boundary: none mapped.
- Named streams inside the boundary: San Marcos River, Hemphill Creek and Morrison Creek.
- Public water: Martindale Water Supply Corporation, surface water bought from another system.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who can I call for directional boring in Martindale near Union Pacific?
Can you get a line beneath a Martindale road or the San Marcos River without cutting across it? We take directional boring jobs in Martindale, Caldwell County. The Census Bureau Vintage 2024 estimate puts the population at 1,266. We install water, sewer, gas, electric conduit and fiber, with the route set to suit a street such as River Road or a crossing near the San Marcos River.
Our main office is in Yukon, Oklahoma, and Martindale work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We are a family business that started in 1965 and began directional boring in 1982. Our work ranges from 3/4 inch service lines to 48 inch casing, a range that can fit the local street and creek crossings around Martindale.

What is Lewisville soil like to bore in Martindale?
The USDA soil survey maps Lewisville soil across 53% of Martindale. Lewisville silty clay, from 0 to 1 percent slopes, covers 41% of the mapped area, and another 10% is Lewisville silty clay on 1 to 3 percent slopes. At about 40 inches below the surface, silty clay is mapped across 53% and clay across 28%. The survey reports an average clay content of 44% at that depth. These are mapped soil conditions, not measurements from a bore location. Sticky clay can gather on a reamer, so the actual route and returns matter.
| USDA soil survey, inside the Martindale city limits | What is mapped |
|---|---|
| Soil series mapped | Lewisville 53 percent, Houston Black 14 percent, Queeny 10 percent, Branyon 6 percent and Tinn 5 percent |
| Texture at the surface | silty clay 53 percent, clay 28 percent and gravelly loam 10 percent |
| Texture about 40 inches down | silty clay 53 percent, clay 28 percent and variable 10 percent |
| Engineering class about 40 inches down | lean clay (CL) 48 percent and fat clay (CH) 40 percent |
| Average clay content about 40 inches down | 44 percent |
| Bedrock mapped within 60 inches | None mapped |
| Seasonal water table within 60 inches | 0 percent of the area |
| Flood prone soils | 11 percent of the area |
| High corrosion risk for uncoated steel | 81 percent of the area |
The USDA soil survey does not map bedrock in Martindale’s top five feet, though that does not rule out deeper rock. A seasonal water table is not mapped within 60 inches, and flood prone soils cover 11% of the area, so creek side pits still need attention. High steel corrosion risk is mapped across 81%; the line owner can select protection for steel casing or tracer wire, while HDPE avoids that soil corrosion concern. The geologic map lists Pleistocene alluvial clay, silt, sand and gravel, plus Late Cretaceous sedimentary sand, chalk and mud. Those mapped units call for checking actual conditions along the bore.
What does it take to bore Martindale’s silty clay?
Lewisville silty clay and the mapped clay share point to sticky ground in Martindale. We set the bore around the route, watch the fluid returns and adjust the reaming plan as the ground responds.
- In Martindale’s mapped heavy clay, we use a thinner fluid blend and work through staged reaming to limit clay buildup on the tools.
- Where Lewisville silty clay can swell around the pipe, we plan to pull the line promptly after opening the final bore.
- At a San Marcos River or drainage crossing, we plan depth beneath the channel and review jurisdiction during project planning.
- On a route near Ridge Road, we hydrovac marked utilities before drilling close; the locator tracks the head and records depth and pitch.

Which roads, tracks or creeks affect a Martindale bore near the San Marcos River?
Texas State Highway 80 has 4.2 mapped roadway miles inside Martindale. FM 1979 has 1.0 mile, and Texas State Highway 142 has 0.2 mile within the limits. A bore in state highway right of way needs a permit and a profile that meets the applicable cover rules. River Road is the city’s longest named street at 2.16 miles, followed by Ridge Road at 0.9 mile and Ladybug Lane at 0.5 mile. Those routes help define where a crossing starts and where pits can sit off pavement.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| Texas State Highway 80 | State highway | 4.2 roadway miles inside | State highway office |
| FM 1979 | State highway | 1 roadway miles inside | State highway office |
| Texas State Highway 142 | State highway | 0.2 roadway miles inside | State highway office |
| FM 1984 | State highway | 0.1 roadway miles inside | State highway office |
| Union Pacific | Railroad nearby | 0.9 miles outside | The railroad |
| San Marcos River | Stream | 7.84 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Hemphill Creek | Stream | 0.77 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Morrison Creek | Stream | 0.22 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Concealed Creek | Stream nearby | Along the boundary | Checked for Corps of Engineers jurisdiction |
| Dickerson Creek | Stream nearby | 0.4 miles outside | Checked for Corps of Engineers jurisdiction |
No railroad track is mapped inside Martindale, but Union Pacific track is 0.9 miles beyond the city limits. A route that crosses it needs an agreement from Union Pacific, with the crossing details set by the railroad. The mapped street and rail crossing count inside the limits is none. The San Marcos River runs 7.84 channel miles through the city, and five mapped street crossings cross named streams. No lake or pond is mapped within one mile, so creek and drainage conditions are the main water crossings to plan around.
Whose permission does a Martindale bore in Caldwell County need?
Martindale is incorporated, so its city streets are under city authority; Texas State Highway 80, FM 1979, Texas State Highway 142 and FM 1984 are state routes. For work in their right of way, the utility owner applies for a TxDOT utility permit through RULIS, reviewed by the Austin District. TxDOT cover rules set the starting depth: electric and communication crossings need 60 inches and lines running along the right of way need 48 inches; water needs 60 inches at crossings and 36 inches along the right of way; pressurized sewer crossings need 60 inches. The district can set a different depth. A Union Pacific track crossing needs the railroad’s agreement. San Marcos River planning includes a check for federal waterway jurisdiction.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Which utilities serve Martindale, including Martindale Water Supply Corporation?
Martindale Water Supply Corporation serves 3,045 people through 1,128 service connections, using purchased surface water. For an electric conduit route in Martindale, AEP Texas Central, Bluebonnet Electric Cooperative, Guadalupe Valley Electric Cooperative and Pedernales Electric Cooperative report service in Caldwell County. The line owner must be identified for the specific address before conduit plans are set; the county list does not establish which provider serves a particular property along River Road.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| Martindale Water Supply Corporation | Public water system | Surface water bought from another system | 1,128 connections, 3,045 people served |
| AEP Texas Central, Bluebonnet Electric Cooperative, Guadalupe Valley Electric Cooperative and Pedernales Electric Cooperative | Electric utilities reporting service in Caldwell County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put Martindale’s median housing year at 1989. Twelve percent of homes were built before 1960, 49% from 1960 to 1999, and 39% in 2000 or later. A replacement bore near Ridge Road may need to meet older buried lines, while newer homes can bring service extensions. We hydrovac pothole marked utilities on the route before drilling near them, since paint shows position but not depth.

How far is Martindale from Redwood and our Yukon yard?
Martindale is in Caldwell County, at an elevation of 523 feet, and covers 2.06 square miles. Its ZIP code is 78655. Redwood is 4.9 miles southwest, Staples is 5.8 miles south, and San Marcos is 6.2 miles west; San Marcos is also the nearest larger city. Lockhart, the county seat, is 9.6 miles east. The Yukon, Oklahoma yard is 439 road miles away, with a drive of 8.3 hours. That distance is part of planning a crew and equipment move for work on Texas State Highway 80 or near the San Marcos River.
Places near Martindale
- Directional boring in Redwood: 4.9 miles southwest
- Directional boring in Staples: 5.8 miles south
- Directional boring in San Marcos: 6.2 miles west
- Directional boring in Uhland: 8.9 miles north
- Directional boring in Lockhart: 9.6 miles east
What would we bore along Martindale’s Ladybug Lane?
- Highway crossing: A bore under Texas State Highway 80 runs below the travel lanes, with cover and permit details set through TxDOT.
- Water service: A connection near Ladybug Lane can be routed beneath the street rather than cutting through its pavement.
- Fiber conduit: A route along River Road can use a bore to pass marked utilities and keep the surface crossing intact.
- Creek crossing: A San Marcos River bore needs channel depth planning and a jurisdiction check during project planning.
- Rail crossing: A route toward the Union Pacific track outside Martindale needs an agreement from the railroad that owns it.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What should I send for a Martindale quote near Texas State Highway 80?
Start with a map pin or address, especially if the route is near Texas State Highway 80 or a San Marcos River crossing. A precise spot shows us which road, creek or right of way may shape the bore. Include what will go underground, the pipe or conduit size and the footage. A sketch or plans can show the pits and nearby lines.
The job details set the price. Ground is one factor: Lewisville silty clay can load up a reamer, while mapped alluvium includes sand and gravel. Crossings add planning where Texas State Highway 80, a creek or a marked utility lies on the route. Logistics matter too, including pit access, pavement, excavator time and the 439 road miles from Yukon. Bore length, pipe size, exposed utilities, backfill, emergency timing and the work profile also affect the scope.
Questions people ask about boring in Martindale
Does Trinity take directional boring work in Martindale, Caldwell County, and how is it staffed?
Yes. We take work in Martindale, Caldwell County, and the crew may come from our own team or a satellite yard run by a drilling contractor we have vetted. You work with Trinity through the job, from the first call to the bore log, whether the work is near River Road or the San Marcos River.
Who owns the electric lines in Martindale, Caldwell County, and who confirms conduit specs?
The fact that utilities report service in Caldwell County does not identify the provider at every Martindale address. AEP Texas Central, Bluebonnet Electric Cooperative, Guadalupe Valley Electric Cooperative and Pedernales Electric Cooperative report county service. Confirm the actual line owner and conduit requirements for the route, including one along Ladybug Lane, before the bore is planned.
Who controls Ladybug Lane in Martindale, and can a bore avoid cutting the street?
Martindale is incorporated, so city streets such as Ladybug Lane are under city authority. Directional boring can place a line below the street without opening a trench through the pavement. The route, pits and marked utilities still need to be checked at the specific crossing before drilling.
How old are buried lines near Ridge Road in Martindale, and can replacement lines be bored?
The American Community Survey 2019 to 2023 five year estimates give Martindale a median housing year of 1989, with 12% built before 1960. That does not date a particular buried line, but it makes locating existing services near Ridge Road important. A replacement line can be bored if the route and utility clearances allow it.
Are groundwater or flood prone soils a concern for bore pits near the San Marcos River in Martindale?
The mapped soils do not show a seasonal water table within 60 inches, but flood prone soils cover 11% of Martindale. Pits near the San Marcos River still need site specific planning, including depth below the channel and ground conditions. We check waterway jurisdiction during planning for a river crossing.
Can Lewisville soil in Martindale corrode steel, and what pipe can we use?
The USDA soil survey maps high steel corrosion risk across 81% of Martindale. The line owner decides what protection steel casing or tracer wire needs. HDPE is not affected by that mapped soil corrosion concern. Lewisville soil is common in the city, but a soil map does not replace checking the planned route.
Can I reach Trinity after hours about an urgent bore near Ladybug Lane in Martindale?
Yes. A person answers Trinity’s phone 24 hours a day at (405) 409-7423. For an urgent job near Ladybug Lane, have the location and the line type ready so we can understand the request and discuss the response needed.
How much notice does Texas811 need for a bore near River Road in Martindale, and what if marks fade?
For work near River Road, request a Texas811 locate at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays; Texas811 describes this as two working days. The request must be no earlier than 14 days before work. If the start slips more than 14 days past the original notice, request a new ticket. Have worn or moved marks refreshed through Texas811 before continuing.
What affects the cost of a directional bore under Texas State Highway 80 in Martindale?
The route and work scope set the cost, not just its length. For a Texas State Highway 80 crossing, relevant factors include bore length, pipe size, permit conditions, pavement and the number of utilities to expose. Lewisville silty clay, creek crossings, pits, excavator time, backfill and mobilization from Yukon can also change the work involved.
Where the Martindale facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Martindale
- U.S. Census Bureau, TIGER/Line 2024: Martindale boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Martindale
- U.S. Census Bureau, American Community Survey 2019 to 2023: Martindale housing units and year built
- Macrostrat geologic map compilation: map units under Martindale
- U.S. EPA Safe Drinking Water Information System: public water systems serving Martindale
- U.S. Department of Transportation, North American Rail Network: track owners in Caldwell County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Caldwell County
- U.S. Geological Survey, Elevation Point Query Service: Martindale elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Martindale
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Martindale
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Martindale, Texas
Type the address of your job in Martindale. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Martindale
Same county: Luling · Mustang Ridge · Niederwald. All counties: Texas county list.
