trinityboringsolutions.com

Redwood Texas Directional Boring: Houston Black Clay, Cottonwood Creek, FM 1978

Quick Answer: What does the top five feet look like around Redwood? The USDA soil survey maps Houston Black clay here, and we do directional boring, also called horizontal directional drilling (HDD), for lines crossing Cottonwood Creek. Redwood is 436 road miles from our Yukon, Oklahoma main office, with Redwood Road among the local routes a bore may follow. Houston Black clay holds a hole but can stick to a reamer and grip pipe. We use staged reaming and plan the pull around the clay.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Redwood bores at a glance

  • Unincorporated community in Guadalupe County, Texas. Population 4,003 (2020 Census count).
  • Road distance from our Yukon, Oklahoma main office: 436 miles, about 8.4 hours of driving.
  • Ground: Houston Black soil is mapped on 61 percent of the area, with clay about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 3 percent of the area.
  • Highways inside the boundary: FM 1978, FM 621, FM 1979 and Texas State Highway 123. State permit office: TxDOT San Antonio District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Cottonwood Creek and Long Creek.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who does directional boring on Redwood Road in Redwood?

Redwood is an unincorporated community in Guadalupe County, with a 2020 Census count of 4,003 people. We take directional boring work here for water, sewer, gas, electric conduit and fiber. A route might place a water service along Redwood Road or carry fiber beneath a local road, with the route checked against marked lines before drilling.

Our main office is in Yukon, Oklahoma, and Redwood work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. The family started Trinity in 1965, and we have done directional boring since 1982. Our range, from 3/4 inch service lines to 48 inch casing, suits a Redwood Road service or a larger crossing.

Aerial view of a Trinity Boring Solutions directional drill set up for a gas line bore at a commercial site
Our directional drill set up for a gas line bore at a commercial site, seen from above. Photos on this page are from our jobs in Oklahoma and Texas.

What does Houston Black soil show about Redwood ground?

The USDA soil survey maps Houston Black as 61% of Redwood and Houston Black clay, 1 to 3 percent slopes, across 44% of the mapped area. Heiden accounts for 21%, and Tinn for 10%. At about 40 inches below the surface, the survey maps clay across 98% of the area, with an average clay content of 53%. The mapped surface texture is clay across 86% and gravelly clay across 10%. Our mapped Houston Black and Heiden patterns guide planning, but they are not test borings. The clay can hold the bore open, but sticky cuttings can build on the reamer.

USDA soil survey, inside the Redwood mapped community boundaryWhat is mapped
Soil series mappedHouston Black 61 percent, Heiden 21 percent, Tinn 10 percent and Ferris 3 percent
Texture at the surfaceclay 86 percent and gravelly clay 10 percent
Texture about 40 inches downclay 98 percent
Engineering class about 40 inches downfat clay (CH) 98 percent
Average clay content about 40 inches down53 percent
Bedrock mapped within 60 inches3 percent of the area (0 percent hard rock, 3 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils10 percent of the area
High corrosion risk for uncoated steel98 percent of the area

The survey maps bedrock within 60 inches in 3% of Redwood, with a typical mapped depth of 36 inches, so a route still needs site specific review. Seasonal water table is not mapped within 60 inches, while flood prone soils cover 10%; Cottonwood Creek makes channel depth relevant to a crossing. High steel corrosion risk is mapped across 98%, so the line owner should consider casing and tracer wire materials; HDPE avoids that steel concern. Below the soils, the geologic map shows the Navarro Group and Marlbrook Marl, undivided, of Maastrichtian age, including clay, siltstone, mudstone, sandstone and limestone.

How should we plan a bore through Redwood clay along Redwood Road?

Houston Black clay is common in Redwood, so a bore plan has to account for sticky cuttings and clay gripping the pipe. The route, including any crossing near Cottonwood Creek, sets the drilling approach.

  1. Houston Black clay can cling to the reamer, so we use thinner drilling fluid with polymer and enlarge the Redwood bore in stages.
  2. Because heavy clay covers much of Redwood, we watch fluid returns and keep pressure controlled near pavement to avoid lifting it.
  3. At Cottonwood Creek, we plan the bore below the channel and check the crossing for U.S. Army Corps of Engineers jurisdiction.
  4. For a marked line under Redwood Road, we hydrovac pothole before drilling near it, then track depth and pitch with a walkover locator.
Reel of 4 inch HDPE conduit on the exit side of a 385 foot directional bore under creeks and wetland in Guthrie, Oklahoma
A reel of 4 inch HDPE conduit on the exit side of a 385 foot bore under creeks and wetland in Guthrie, Oklahoma.

Where might a line go under Cottonwood Creek in Redwood?

FM 1978, FM 621, FM 1979 and Texas State Highway 123 run inside the mapped Redwood community boundary. TxDOT rules require boring or tunneling beneath existing highway pavement, so a crossing can pass below the roadway instead of cutting through it. Redwood Road is the longest named street at 3.48 miles; Meadow Brook Lane and Plum Street are also mapped routes. The actual alignment matters because pavement, driveways and marked utilities affect where the entry and exit pits can sit.

CrossingTypeMapped extentWho has a say
FM 1978State highway3.8 roadway miles insideState highway office
FM 621State highway2.4 roadway miles insideState highway office
FM 1979State highway1.8 roadway miles insideState highway office
Texas State Highway 123State highway0.6 roadway miles insideState highway office
Cottonwood CreekStream3.76 channel miles insideChecked for Corps of Engineers jurisdiction
Long CreekStream1.18 channel miles insideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside the Redwood boundary or within 1 mile outside it, and no street and rail crossing is mapped in the community. Cottonwood Creek runs 3.76 channel miles inside Redwood, and Long Creek runs 1.18 miles. Public mapping shows six street crossings of named streams. We see no lakes or ponds mapped within 1 mile, though Long Creek is within Redwood limits. At a Cottonwood Creek crossing, the bore plan needs to stay under the channel, and the creek crossing is checked for U.S. Army Corps of Engineers jurisdiction.

Who approves a bore on Guadalupe County roads and highways in Redwood?

Redwood has no city government, so its unincorporated community streets are not city streets; the relevant road authority depends on whether the route is county or state right of way. A bore on FM 1978, FM 621, FM 1979 or Texas State Highway 123 needs a TxDOT utility permit. Electric and communication lines need 60 inches of cover at a highway crossing and 48 inches along the right of way; water needs 60 inches at crossings and 36 inches along it. Pressurized sewer needs 60 inches at crossings, subject to any different depth set by the district. The line owner files in TxDOT’s RULIS system for the San Antonio District, and we prepare the bore plan and profile for that filing. Cottonwood Creek crossings are checked for federal water jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Who owns the lines in Guadalupe County near Redwood?

Before planning a bore near FM 621, we confirm the specific Redwood address’s water provider with Guadalupe County or its local water district. Public drinking water records do not match a provider to this community, so the address needs its own check. Utilities reporting electric service in Guadalupe County include AEP Texas Central, City of New Braunfels, City of San Antonio, City of Seguin, Bluebonnet Electric Cooperative, Guadalupe Valley Electric Cooperative and Pedernales Electric Cooperative. We confirm the line owner for the address before planning an electric conduit bore near Redwood Road.

Line ownerWhat it isSourceSize
AEP Texas Central, City of New Braunfels, City of San Antonio, City of Seguin, Bluebonnet Electric Cooperative, Guadalupe Valley Electric Cooperative and Pedernales Electric CooperativeElectric utilities reporting service in Guadalupe CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Redwood’s median housing year at 1990, a planning detail when we assess existing underground utilities. It estimates 7% of homes were built before 1960, 64% from 1960 to 1999 and 29% in 2000 or later. That mix can mean a project connects new service or replaces older pipe along a street such as Redwood Road. Before the drill nears any marked utility, we expose it with hydrovac potholing; paint shows position, not depth. For example, a bore under Redwood Road needs its marked lines pothole exposed before the bit approaches.

Trinity Boring Solutions technician hydrovac daylighting along a commercial curbline during utility locating in Oklahoma City
Hydrovac daylighting along a commercial curb line in Oklahoma City to find the utilities before a bore.

Where is Redwood near Martindale and San Marcos?

Redwood is an unincorporated community in Guadalupe County, at an elevation of 552 feet and covering 6.44 square miles. The ZIP code is 78666. San Marcos is 4.7 miles north and is the nearest larger city; Martindale is 4.9 miles northeast. Seguin, the county seat, is 15.6 miles south. From our Yukon, Oklahoma yard, Redwood is 436 road miles away and an 8.4 hour drive. Those distances matter when a project near FM 1978 needs crews, equipment and materials brought to the site.

Places near Redwood

What kinds of bores come up on Redwood Road in Redwood?

  • Highway crossing: A bore beneath FM 1978 can keep the roadway uncut, with the alignment and cover planned for TxDOT review.
  • Water service: A new connection near Redwood Road needs the address provider confirmed before the route and line owner are set.
  • Fiber route: Conduit along Meadow Brook Lane can be bored beneath pavement and driveways rather than opened along the surface.
  • Creek crossing: A line beneath Cottonwood Creek needs depth planned under the channel and a jurisdiction check during planning.
  • Electric conduit: Near FM 621, we confirm the address line owner before planning a conduit route and exposing marked utilities.
  • Drainage route: Long Creek and Redwood’s mapped drainage areas make the route and pit locations relevant to a bore plan.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What should I send for a Redwood bore near FM 1978?

Start with the map pin, especially if the route is near FM 1978 or Cottonwood Creek; the exact location shows which road authority and crossings may shape the plan. Add what will go in the ground, the pipe or conduit size and the footage. A sketch or plans help us review the route and pit locations.

For a Redwood estimate, Houston Black clay matters first because it can load a reamer and grip the pipe. Crossing count and exposure work matter too, especially near Cottonwood Creek or a marked line under Redwood Road. Pipe size, bore length, pavement, creek or drainage work, pits, excavator time and sand backfill also shape the scope. A route on FM 1978 may require highway permitting and cover planning. Mobilization from Yukon matters because Redwood is 436 road miles from the yard.

Questions people ask about boring in Redwood

Does Trinity take directional boring jobs in Guadalupe County near Redwood, and who staffs them?

Yes. We take directional boring work in Redwood and handle the job through Trinity, whether our own crew or a vetted partner contractor is on site. The main office is in Yukon, Oklahoma, and our crews can install lines such as water, sewer, gas, electric conduit and fiber along routes near Redwood Road.

Can groundwater or flood prone ground affect bore pits near Cottonwood Creek in Redwood?

It can. Seasonal water table is not mapped within 60 inches in Redwood, but flood prone soils cover 10% of the mapped area. At Cottonwood Creek, we plan the bore below the channel and consider where entry and exit pits can sit; the crossing is checked for U.S. Army Corps of Engineers jurisdiction.

Does Houston Black soil in Redwood create a corrosion issue for steel pipe?

The soil survey maps high steel corrosion risk across 98% of Redwood, so the line owner should consider the material and any coating for steel casing or tracer wire. Across Redwood’s clay and Ferris soils, we use HDPE because soil corrosion does not affect it. Houston Black clay is also sticky, so the bore method and pipe pull need to account for the ground as well as corrosion.

What ground does a bore pass through in Redwood’s Houston Black soil?

Houston Black is mapped across 61% of Redwood, and the USDA soil survey maps clay across 98% of the area at about 40 inches below the surface. Average clay content at that depth is 53%, with the soil classified as CH. That clay can hold an open hole but stick to the reamer, so staged reaming helps.

Will a directional bore in Redwood encounter rock beneath Houston Black or Tinn soils?

The soil survey maps bedrock within 60 inches in 3% of Redwood, with a typical depth of 36 inches, so some routes may encounter shallow rock. The geologic map below the soil layer identifies the Navarro Group and Marlbrook Marl, undivided. A route needs site review; the mapped information is not a test boring.

Who approves a bore under FM 1978 in Redwood?

TxDOT reviews a utility permit for work in the FM 1978 right of way through its San Antonio District. The utility owner submits the application in RULIS, and we prepare the bore plan and profile. Required cover depends on the line type, and the district may set a different depth in the permit.

Does Trinity cover San Marcos and rural sites outside Redwood?

Yes. We take work across Texas, including Redwood, nearby San Marcos and rural addresses outside the mapped community boundary. San Marcos is 4.7 miles north of Redwood, while Martindale is 4.9 miles northeast. Each address still needs its own route, utility owner and crossing details checked.

How far ahead should I call Texas811 for a Redwood Road bore in Redwood?

For a bore along Redwood Road, make the Texas811 locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. If a start near FM 1979 slips more than 14 days past the original notice, we make a new request. Before work continues near Meadow Brook Lane, we have worn or moved marks refreshed through Texas811.

What affects the cost of a directional bore near FM 1978 in Redwood?

The route and scope determine the price. Houston Black clay, bore length, pipe or conduit size, marked utility crossings, pavement, pits and creek work near Cottonwood Creek all matter. A job in FM 1978 right of way also needs permit and cover planning. Mobilization is another factor because Redwood is 436 road miles from Yukon.

Where the Redwood facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Redwood

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Redwood, Texas

Type the address of your job in Redwood. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Redwood

Same county: Seguin · Cibolo · Schertz · New Braunfels · Selma · McQueeney · Lake Dunlap · Marion · Santa Clara · New Berlin · Zuehl. All counties: Texas county list.