Natalia Texas Directional Boring: Nusil Soil, Interstate 35 and Fort Ewell Creek
Quick Answer: Nusil soil and sandy clay loam below it shape bores near Fort Ewell Creek in Natalia. Trinity Boring Solutions does directional boring, also called horizontal directional drilling (HDD), for routes crossing Interstate 35 and other local features. Natalia is 507 road miles from our Yukon, Oklahoma main office, and 2nd Street is one local route to consider for access. Fine sand is common at the surface, while clay below can grip a reamer and pipe.
Natalia bores at a glance
- Incorporated city in Medina County, Texas. Population 1,356 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 507 miles, about 9.8 hours of driving.
- Ground: Nusil soil is mapped on 34 percent of the area, with sandy clay loam about 40 inches down.
- Rock: no bedrock is mapped in the top 60 inches.
- Highways inside the boundary: Interstate 35, Texas State Highway 132 and FM 471. State permit office: TxDOT San Antonio District.
- Railroad track inside the boundary: Union Pacific, with 1 mapped street and rail crossings.
- Named streams inside the boundary: Fort Ewell Creek, Fort Jewet Creek, Natalia Canal and Chacon Creek.
- Public water: City of Natalia, groundwater wells.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who does directional boring near Fort Ewell Creek in Natalia?
Trinity Boring Solutions takes directional boring work in Natalia, Medina County, where the Census Bureau Vintage 2024 estimate puts the population at 1,356. The top five feet here are mapped with fine sand and clay textures, with sandy clay loam common at about 40 inches. We install water, sewer, gas, electric conduit and fiber lines beneath routes such as 2nd Street, where an open cut would interrupt the street.
Our main office is in Yukon, Oklahoma, and Natalia work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore is roughly 4,100 feet under the Arkansas River in Tulsa; a Natalia service route near Fort Ewell Creek is a smaller scale job. For Natalia work, our family business brings experience dating to 1965 and directional boring experience since 1982.

What is Nusil soil like to bore in Natalia?
The USDA soil survey maps Nusil soil across 34 percent of Natalia, the largest mapped soil series share. Surface textures are mostly fine sand, mapped across 57 percent, and loamy fine sand across 28 percent. At about 40 inches, sandy clay loam covers 40 percent of the mapped area, sandy clay 29 percent and fine sand 23 percent. Average clay content at that depth is 28 percent. These are mapped soil patterns, not test borings, so a bore plan still has to account for changing ground along a route such as 2nd Street.
| USDA soil survey, inside the Natalia city limits | What is mapped |
|---|---|
| Soil series mapped | Nusil 34 percent, Hitilo 23 percent, Wilco 16 percent, Poth 12 percent and Divot 7 percent |
| Texture at the surface | fine sand 57 percent, loamy fine sand 28 percent and clay loam 8 percent |
| Texture about 40 inches down | sandy clay loam 40 percent, sandy clay 29 percent and fine sand 23 percent |
| Engineering class about 40 inches down | clayey sand (SC) 34 percent, lean clay (CL) 31 percent and silty sand (SM) 23 percent |
| Average clay content about 40 inches down | 28 percent |
| Bedrock mapped within 60 inches | None mapped |
| Seasonal water table within 60 inches | 0 percent of the area |
| Flood prone soils | 7 percent of the area |
| High corrosion risk for uncoated steel | 9 percent of the area |
Bedrock is not mapped in Natalia’s top five feet, and seasonal water tables are not mapped there; neither finding rules out deeper rock or water at a particular site. Flood prone soils cover 7 percent of the mapped area, so a Fort Ewell Creek route needs attention to channel depth and agency jurisdiction. High steel corrosion risk is mapped across 9 percent, a concern for uncoated casing and tracer wire. The mapped Carrizo Sand unit is Ypresian sandstone and shale, part of the Carrizo Wilcox aquifer; sandstone in that unit can mean slower drilling than soil.
How do we plan directional boring through Natalia’s sandy clay loam?
We adjust the bore to the mixed ground mapped in Natalia, where sandy clay loam at about 40 inches meets fine sand near the surface. That calls for controlling the hole as the drill moves between textures.
- Nusil soil has fine sand near the surface, which can fall in behind the bit; we use drilling fluid and staged reaming to keep the hole supported.
- Sandy clay loam and sandy clay are mapped at about 40 inches, so we manage sticky cuttings and prepare pipe before opening the final reamed hole.
- On routes near 5th Street, we hydrovac expose marked utilities before drilling close, because paint does not show how deep a line sits.
- At Fort Ewell Creek, we plan a path below the channel and check jurisdiction during planning; a walkover locator tracks the head and logs depth and pitch.

What does a bore have to cross in Natalia near Interstate 35?
Interstate 35, Texas State Highway 132 and FM 471 all run inside Natalia, so a route that reaches their right of way needs the relevant road approval and crossing plan. TxDOT maps 2.1 roadway miles of Interstate 35 inside the city limits. Among named local streets, 2nd Street runs 1.96 miles, 6th Street 0.94 miles and 5th Street 0.86 miles within the city. A bore can keep those paved surfaces intact, but the planned line still has to clear marked utilities and fit the road crossing requirements.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| Interstate 35 | Interstate | 2.1 roadway miles inside | State highway office |
| Texas State Highway 132 | State highway | 2 roadway miles inside | State highway office |
| FM 471 | State highway | 1.6 roadway miles inside | State highway office |
| Union Pacific | Railroad | 0.53 track miles inside | The railroad |
| Fort Ewell Creek | Stream | 0.75 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Fort Jewet Creek | Stream | 0.26 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Natalia Canal | Stream | 0.16 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Chacon Creek | Stream | 0.05 channel miles inside | Checked for Corps of Engineers jurisdiction |
Union Pacific has 0.53 track miles in Natalia on its Laredo Subdivision, and public mapping shows one street and rail crossing inside the limits. Fort Ewell Creek runs 0.75 channel miles here; Fort Jewet Creek, Natalia Canal and Chacon Creek are also mapped within the city. Public mapping records four street crossings of named streams. A creek crossing needs a depth plan that stays beneath the channel, with jurisdiction checked during planning. In Natalia, we account for no lakes or ponds mapped within one mile when planning a boring route.
Who approves Natalia bores near Union Pacific track?
For a bore along Interstate 35, Texas State Highway 132 or FM 471, the line owner files the utility permit in TxDOT’s RULIS system; we prepare the bore plan and profile for that filing. For Natalia, we plan boring schedules around review by the TxDOT San Antonio District. TxDOT cover rules call for 60 inches at electric and communication highway crossings and 48 inches along the right of way; water lines need 60 inches at crossings and 36 inches alongside, while pressurized sewer crossings need 60 inches. A Union Pacific track crossing needs an agreement with the railroad, and a Fort Ewell Creek route is checked for Army Corps jurisdiction during planning. Natalia city streets belong to the city.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Whose lines are already buried in Medina County and Natalia?
The City of Natalia public water system uses groundwater wells and reports 650 service connections serving 1,336 people. Before a water bore near 5th Street, the route has to account for existing service lines. Electric service reported in Medina County includes AEP Texas Central, City of San Antonio, Bandera Electric Cooperative, Karnes Electric Cooperative and Medina Electric Cooperative. We confirm the electric line owner for the address before planning a conduit bore; the county list does not identify the provider at every Natalia property.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of Natalia | Public water system | Groundwater wells | 650 connections, 1,336 people served |
| AEP Texas Central, City of San Antonio, Bandera Electric Cooperative, Karnes Electric Cooperative and Medina Electric Cooperative | Electric utilities reporting service in Medina County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 estimates put Natalia’s median housing year at 1967; 45 percent of homes were built before 1960, 34 percent from 1960 to 1999 and 21 percent in 2000 or later. Work near 2nd Street may involve replacing older service or adding a new connection. We hydrovac pothole marked lines on the planned path before drilling close to them, since locate marks show position but not depth.

How far is Natalia from Lackland AFB and our Yukon office?
Natalia is in Medina County, covers 1.39 square miles and sits at an elevation of 739 feet. Natalia is served by ZIP code 78059, a location detail we use when organizing underground work. Devine is 4.2 miles southwest, Lytle 4.9 miles northeast, Bigfoot 8.5 miles south, LaCoste 9.0 miles north and Castroville 12.1 miles north. Hondo, the county seat, is 22.0 miles northwest; Lackland AFB is 19.8 miles northeast. Our Yukon, Oklahoma main office is 507 road miles away, a 9.8 hour drive, which affects crew mobilization for work on 2nd Street or near Interstate 35.
Places near Natalia
- Directional boring in Devine: 4.2 miles southwest
- Directional boring in Lytle: 4.9 miles northeast
- Directional boring in Bigfoot: 8.5 miles south
- Directional boring in LaCoste: 9 miles north
- Directional boring in Castroville: 12.1 miles north
- Directional boring in Lackland AFB: 19.8 miles northeast
What kinds of bores come up near 2nd Street in Natalia?
- Highway crossing: An Interstate 35 bore needs a route beneath the road right of way that preserves the pavement and clears marked lines.
- Water service: A connection near the City of Natalia groundwater system must be planned around existing services along streets such as 2nd Street.
- Fiber route: A conduit bore along 6th Street can keep the paved route uncut while the drill passes beneath marked utilities.
- Creek crossing: A Fort Ewell Creek bore needs a planned depth below the channel and a jurisdiction check during planning.
- Rail crossing: Work beneath the Union Pacific Laredo Subdivision requires a railroad agreement covering the crossing conditions.
- Street service: A bore near 5th Street can connect a property without opening the full paved route.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What drives the price of a Natalia bore near 3rd Street?
Send a map pin for the exact spot near 3rd Street or Fort Ewell Creek; the route determines which pavement, utilities or channel a bore must clear. We also need what is going in the ground, the pipe or conduit size and the footage. A sketch or plans help us scope the path before pricing it.
The job route sets the price through its ground, crossings and logistics. Nusil soil’s sandy surface and clay at depth affect drilling and reaming time. Crossings of Interstate 35, Union Pacific track or Fort Ewell Creek add planning and clearance work. Pipe size, bore length, exposed utilities, concrete, pits, sand backfill and excavator time also matter. Natalia’s 507 road miles from Yukon affect mobilization, as can emergency timing or a high profile route.
Questions people ask about boring in Natalia
Does Trinity Boring Solutions take directional boring jobs in Medina County near Natalia?
Yes, we take directional boring work in Natalia and across Texas. Our main office is in Yukon, Oklahoma, and work near Fort Ewell Creek is staffed by our own crews or vetted partner drilling contractors. For directional boring in Natalia, we stay your Trinity contact from the first call through the bore log, whatever crew is on site.
What does a Natalia bore beneath Union Pacific track require?
A bore beneath Union Pacific’s 0.53 track miles in Natalia requires an agreement from the railroad that owns the track. The agreement sets crossing conditions such as casing, depth and flagging. If the route also occupies highway right of way near Interstate 35, TxDOT asks for a copy of that agreement.
Can a line be bored under Fort Ewell Creek in Natalia?
Yes, a line can be planned beneath Fort Ewell Creek, which has 0.75 channel miles inside Natalia. The bore depth must stay below the channel, and the crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning. Flood prone soils are mapped across 7 percent of the city area.
For Natalia, who runs its public water system, and where does its water come from?
The City of Natalia owns the public water system, which draws from groundwater wells. Public records list 650 service connections serving 1,336 people. For a proposed connection near 5th Street, the route still needs to be checked against existing water lines before drilling.
Which electric provider serves my Natalia address in Medina County?
The provider depends on the address, so we confirm the line owner before planning an electric conduit bore near 2nd Street. Utilities reporting electric service in Medina County include AEP Texas Central, City of San Antonio, Bandera Electric Cooperative, Karnes Electric Cooperative and Medina Electric Cooperative.
Does the city control Natalia streets such as 5th Street, and must we cut them?
Natalia is incorporated, so its city streets, including 5th Street, belong to the city. A directional bore can pass beneath pavement without cutting the full street, subject to the route and required approvals. We expose marked utilities along the bore path before the drill approaches them.
How early should I request a locate for a Natalia bore along 2nd Street?
For a bore along 2nd Street, request a Texas811 locate at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. If the start slips more than 14 days past the original notice, make a new request; worn or moved marks must be refreshed before work continues.
Does Natalia’s distance from Lackland AFB change a bore scheduled there?
Lackland AFB is 19.8 miles northeast of Natalia, while our Yukon, Oklahoma main office is 507 road miles away, a 9.8 hour drive. That distance can affect mobilization for work near Interstate 35. The route, equipment needs and local access also shape how a crew is scheduled.
What affects the cost of a directional bore in Natalia near Interstate 35?
The price depends on the job scope, not one fixed measure. Near Interstate 35, highway crossings and pavement affect the plan; Nusil soil’s sand and clay textures affect drilling and reaming. Pipe size, footage, utility exposures, creek crossings, pits, backfill, excavator time and mobilization from Yukon also factor into the work.
Where the Natalia facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Natalia
- U.S. Census Bureau, TIGER/Line 2024: Natalia boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Natalia
- U.S. Census Bureau, American Community Survey 2019 to 2023: Natalia housing units and year built
- Macrostrat geologic map compilation: map units under Natalia
- U.S. EPA Safe Drinking Water Information System: public water systems serving Natalia
- U.S. Department of Transportation, North American Rail Network: track owners in Medina County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Medina County
- U.S. Geological Survey, Elevation Point Query Service: Natalia elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Natalia
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Natalia
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Natalia, Texas
Type the address of your job in Natalia. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Natalia
Same county: Hondo · Lake Medina Shores · D'Hanis · Yancey. All counties: Texas county list.
