trinityboringsolutions.com

Surfside Beach Texas Directional Boring: Galveston Fine Sand, Highway 332 and Oyster Creek

Quick Answer: Surf Drive and Fort Velasco Drive are the longest named streets, and Texas State Highway 332 is one route a bore may need to pass beneath; we do directional boring, also called horizontal directional drilling (HDD), in Surfside Beach. Surfside Beach is 521 road miles from our Yukon, Oklahoma main office, and Surf Drive is one of its longest routes. Galveston fine sand covers 52% of the mapped surface texture, so the hole needs support against caving. Texas State Highway 332 gives a bore a paved crossing to plan around.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Surfside Beach bores at a glance

  • Incorporated city in Brazoria County, Texas. Population 704 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 521 miles, about 10.3 hours of driving.
  • Ground: Galveston soil is mapped on 46 percent of the area, with fine sand about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: Texas State Highway 332. State permit office: TxDOT Houston District.
  • Railroad track inside the boundary: none mapped.
  • Public water: Village of Surfside Beach, surface water bought from another system.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who handles directional boring beneath Texas State Highway 332 in Surfside Beach?

Surf Drive and Fort Velasco Drive are the longest named streets; Surfside Beach has 31.99 public road miles, with Texas State Highway 332 inside the limits. In Brazoria County, the Census Bureau Vintage 2024 estimate puts the population at 704. We install water, sewer, gas, electric conduit and fiber for routes along these streets or beneath the highway, as each project requires.

Our main office is in Yukon, Oklahoma, and Surfside Beach work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. A 3/4 inch service line is at the small end of our work, while 48 inch casing is at the large end. Our family business began in 1965 and has done directional boring since 1982, for scopes that could include Texas State Highway 332.

Trinity Boring Solutions Vermeer D24x40 directional drill set up for a bore
Our Vermeer D24x40 directional drill set up for a bore. Photos on this page are from our jobs in Oklahoma and Texas.

How does Galveston soil affect drilling in Surfside Beach?

The USDA soil survey maps Galveston as the leading soil series in Surfside Beach, covering 46% of the area. Galveston Drumbay fine sands, on 0 to 2 percent slopes and occasionally flooded by storm surge, account for 43%. Fine sand makes up 52% of mapped surface texture and is also mapped at about 40 inches below the surface across 52% of the area. Sand cuts readily, but it can cave behind a drill head. These survey patterns help us plan the fluid and staged reaming; they are not test borings.

USDA soil survey, inside the Surfside Beach city limitsWhat is mapped
Soil series mappedGalveston 46 percent, Velasco 8 percent, Follet 7 percent, Tracosa 5 percent and Veston 4 percent
Texture at the surfacefine sand 52 percent, clay 8 percent and clay loam 7 percent
Texture about 40 inches downfine sand 52 percent, clay 14 percent and loam 7 percent
Engineering class about 40 inches downsilty sand (SM) 46 percent, fat clay (CH) 19 percent and lean clay (CL) 14 percent
Average clay content about 40 inches down17 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches88 percent of the area
Flood prone soils85 percent of the area
High corrosion risk for uncoated steel26 percent of the area

Bedrock is not mapped in the top five feet of Surfside Beach, though that does not rule out deeper rock. The geologic map shows Holocene Alluvium, including sand, silt and clay. A seasonal water table is mapped within 60 inches across 88% of the area, and flood prone soils cover 85%, so pits near Oyster Creek need attention to water and drainage. High steel corrosion risk is mapped across 26%; the line owner should select coatings for steel casing or tracer wire, while HDPE avoids that steel concern.

How do we drill through Surfside Beach fine sand?

Surfside Beach has extensive mapped fine sand and a shallow seasonal water table. We plan the bore to keep the hole supported, control fluid and keep water in the pits manageable.

  1. Because fine sand is mapped across 52% of Surfside Beach, we use drilling fluid to support the hole and ream in stages before pulling pipe.
  2. With a seasonal water table mapped within 60 inches across 88% of the city, we keep pits small and pump water when needed.
  3. Before drilling near Texas State Highway 332 or Surf Drive, we hydrovac expose each marked utility because surface paint does not show its depth.
  4. We track the drill head from the surface and log depth and pitch, including on routes near Oyster Creek where wet ground can affect the plan.
Trinity Boring Solutions water trailer supplying water for bentonite drilling fluid on a sleeve bore in northeast OKC
Our water trailer feeding the bentonite drilling fluid mix on a sleeve bore in northeast Oklahoma City.

Which roads, tracks or creeks can a bore cross in Surfside Beach near Surf Drive?

Texas State Highway 332 has 0.6 mapped roadway miles inside Surfside Beach, so a bore beneath its pavement needs a planned crossing rather than an open cut. There are no mapped highways within 1.5 miles outside the city limits. Among the longest named streets, Surf Drive runs 1.0 mile, Fort Velasco Drive runs 0.99 mile and Thunder Road runs 0.75 mile within the city. Beach Drive adds another 0.7 mile. These local routes help define access and where a bore might need to pass beneath pavement.

CrossingTypeMapped extentWho has a say
Texas State Highway 332State highway0.6 roadway miles insideState highway office
Union PacificRailroad nearby0.2 miles outsideThe railroad
Oyster CreekStream nearby0.7 miles outsideChecked for Corps of Engineers jurisdiction
Swan LakeLake or pond384 acres, insideChecked for Corps of Engineers jurisdiction
Fresh Water LakeLake or pond161 acres, nearbyChecked for Corps of Engineers jurisdiction
Oyster Creek CutLake or pond7 acres, insideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad lies inside Surfside Beach, and no mapped street and rail crossings are shown there. Union Pacific track is 0.2 miles outside the limits, so any proposed track crossing needs coordination with the railroad. No named stream runs inside the city, and no street crossings of named streams are mapped there; Oyster Creek is 0.7 miles away. The city has 0.64 miles of unnamed drainage and includes Swan Lake and Oyster Creek Cut, which may affect local bore planning.

Whose permission does a bore in Surfside Beach and Brazoria County need?

Surfside Beach is incorporated, so its city streets belong to the city; Texas State Highway 332 is under TxDOT oversight. For work in the highway right of way, the utility owner applies through TxDOT’s RULIS system, with the TxDOT Houston District reviewing it, while we prepare the bore plan and profile and work under the utility owner’s permit. At highway crossings, cover is at least 60 inches for electric and communication lines and water lines; pressurized sewer also needs 60 inches. A Union Pacific track crossing needs an agreement with the railroad. Oyster Creek or lake crossings are checked for Corps jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Whose lines are already buried in Surfside Beach near the Village of Surfside Beach?

The Village of Surfside Beach public water system uses purchased surface water and reports 1,338 service connections serving 5,697 people. Electric service is reported in Brazoria County by CenterPoint Energy, Texas-New Mexico Power and Jackson Electric Cooperative; that does not mean one company serves every Surfside Beach address. Before we plan an electric conduit bore near Surf Drive, we confirm which utility owns the line.

Line ownerWhat it isSourceSize
Village of Surfside BeachPublic water systemSurface water bought from another system1,338 connections, 5,697 people served
CenterPoint Energy, Texas-New Mexico Power and Jackson Electric CooperativeElectric utilities reporting service in Brazoria CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

American Community Survey 2019 to 2023 five year estimates put the median Surfside Beach home year at 1980; 5% were built before 1960 and 36% in 2000 or later. That mix can mean a bore along Fort Velasco Drive is replacing older service or bringing a new line to newer housing. Paint shows a marked utility’s position, not its depth, so we use hydrovac potholing to expose marked lines, including the Village water line and the electric owner’s conduit, before drilling near them.

Coiled black HDPE conduit fitted with a pulling grip staged on a lawn along a completed bore path
Coiled HDPE conduit fitted with a pulling grip, staged on a lawn along a finished bore path.

How far is Surfside Beach from Oyster Creek and nearby towns?

Surfside Beach is an incorporated city in Brazoria County with 1.59 square miles of land, an elevation of 3 feet and ZIP code 77541. Quintana is 3.9 miles southwest, Oyster Creek is 4.2 miles northwest and Freeport is 4.4 miles west. Freeport is the nearest larger city; Angleton, the county seat, is 17.5 miles northwest. Our Yukon yard is 521 road miles away, a 10.3 hour drive, so that distance is part of planning a job on Surf Drive or elsewhere in the city.

Places near Surfside Beach

Which jobs call for a bore near Fort Velasco Drive in Surfside Beach?

  • Highway crossing: A line beneath Texas State Highway 332 needs a bore planned for the roadway and the required cover.
  • Water service: A connection near the Village of Surfside Beach system may need a route beneath Surf Drive or Fort Velasco Drive.
  • Fiber route: A fiber bore along Thunder Road can avoid cutting its pavement by placing the line below the surface.
  • Drainage crossing: A route near Oyster Creek or the city’s unnamed drainage needs planning for wet, flood prone ground.
  • Rail crossing: Work near Union Pacific, 0.2 miles outside the city limits, requires attention to the railroad crossing agreement.
  • Service replacement: A bore near Fort Velasco Drive can route replacement water or sewer service beneath existing pavement.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What do you need to quote work near Union Pacific in Surfside Beach?

For a bore near Union Pacific or along Fort Velasco Drive, send the address or map pin, what will go in the ground, the pipe or conduit size and the footage. A sketch or plans help us see the route, crossings and pit locations before we scope the work.

The job scope sets the price. Ground conditions matter: Surfside Beach’s fine sand may need staged reaming and fluid to hold the hole open. Crossings add work when a route meets Texas State Highway 332, pavement, drainage or marked utilities that must be exposed. Logistics also count, including pit space, excavator time, sand backfill and mobilization from Yukon, 521 road miles away. Pipe size, length, emergency timing and the number of utilities along the route also affect the scope.

Questions people ask about boring in Surfside Beach

Does Trinity take directional boring work in Surfside Beach and Brazoria County, and who staffs it?

Yes. We take work in Surfside Beach and across Texas, with our own crews or crews from satellite yards run by partner contractors we have vetted. You work with Trinity from the first call through the bore log, even if a partner contractor’s crew is at the site near Surf Drive.

Can Surfside Beach bores replace older lines near Fort Velasco Drive?

Yes. The American Community Survey 2019 to 2023 estimates put the median home year at 1980, so replacement work may involve older buried services as well as new connections. Near Fort Velasco Drive, we expose marked utilities with hydrovac potholing before the drill approaches them.

Will groundwater or flood prone soil affect bore pits near Oyster Creek in Surfside Beach?

It can. The USDA soil survey maps a seasonal water table within 60 inches across 88% of Surfside Beach and flood prone soils across 85%. Near Oyster Creek, we account for water in the pits and the chance that wet sand may flow, using small pits and pumping when needed.

Does Galveston soil in Surfside Beach corrode steel, and what pipe can we use?

The USDA soil survey maps high steel corrosion risk across 26% of Surfside Beach. The line owner chooses coatings for steel casing or tracer wire. HDPE avoids the steel corrosion issue, and the right material depends on the line and the bore near Galveston soil.

What ground does a bore pass through in Surfside Beach Galveston soil?

The USDA soil survey maps Galveston as 46% of the soil series, with fine sand covering 52% at about 40 inches below the surface. Clay is also present at that depth. These are mapped soil patterns, not site test results, so a bore near Surf Drive still needs planning for the conditions along its route.

Will a bore in Surfside Beach hit rock?

Bedrock is not mapped in the top five feet of Surfside Beach, but that does not rule out deeper rock. The geologic map identifies Holocene Alluvium with sand, silt and clay. A bore near Texas State Highway 332 is planned for the ground encountered along its actual alignment.

Does Trinity cover Quintana and rural sites outside Surfside Beach?

Yes. We take work across Texas, including projects around Quintana and rural locations outside Surfside Beach. Quintana is 3.9 miles southwest of the city. The site address, line type and route help us assess the scope and mobilization for a bore in the area.

How much notice does Texas811 need for a Surfside Beach bore near Surf Drive?

Paint near Surf Drive shows a marked line’s position, not how deep it is. Texas law requires a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before. If the start slips more than 14 days past the notice, request a new ticket; worn or moved marks need refreshing through Texas811 before work continues.

What affects the cost of a directional bore beneath Texas State Highway 332 in Surfside Beach?

The scope drives the price, not a single local rate. Length, pipe size, fine sand, pavement, exposed utilities, drainage crossings, pit work and backfill all matter. A route beneath Texas State Highway 332 can involve highway requirements, while mobilization reflects the 521 road miles from our Yukon main office.

Where the Surfside Beach facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Surfside Beach

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Surfside Beach, Texas

Type the address of your job in Surfside Beach. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Surfside Beach

Same county: Pearland · Alvin · Lake Jackson · Angleton · Manvel · Iowa Colony · West Columbia · Sweeny · Brazoria · Wild Peach Village · Jones Creek · Danbury. All counties: Texas county list.