Richland Springs Texas Directional Boring: Mereta Clay Loam, US 190 and Richland Creek
Quick Answer: Richland Springs is an incorporated town, and we take directional boring work along city streets such as Park Avenue, also called horizontal directional drilling (HDD). US 190 is one of the routes a bore may need to pass beneath without cutting the pavement. Richland Springs is 375 road miles from our Yukon, Oklahoma main office, and the Central Texas and Colorado River Railway is another local crossing to plan around. Mereta clay loam covers 35 percent of the mapped area, so sticky cuttings and staged reaming can matter.
Richland Springs bores at a glance
- Incorporated city in San Saba County, Texas. Population 246 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 375 miles, about 7.8 hours of driving.
- Ground: Mereta soil is mapped on 35 percent of the area, with loam about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 10 percent of the area.
- Highways inside the boundary: US 190 and FM 45. State permit office: TxDOT Brownwood District.
- Railroad track inside the boundary: Central Texas and Colorado River Railway, with 5 mapped street and rail crossings.
- Named streams inside the boundary: Richland Creek.
- Public water: City of Richland Springs, groundwater wells.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who can I call for directional boring in Richland Springs along US 190?
Richland Springs is an incorporated town, and we take directional boring work on city streets such as Park Avenue. Its streets belong to the city, while US 190 is a state highway. The Census Bureau Vintage 2024 estimate puts the town population at 246. We install water, sewer, gas, electric conduit and fiber, including routes along Marion Street or service connections from streets to properties.
Our main office is in Yukon, Oklahoma, and Richland Springs work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our family business began in 1965, and we have been doing directional boring since 1982. Four decades of boring experience inform how we plan for the Mereta clay loam and shallow mapped bedrock around Richland Springs.

How does Mereta soil affect drilling in Richland Springs?
The USDA soil survey maps Mereta as the largest soil series in Richland Springs, covering 35 percent of the town, with Sagerton at 24 percent. Clay loam is the mapped surface texture across 73 percent of the area. At about 40 inches below the surface, loam is mapped under 35 percent and clay loam under 24 percent; average clay content there is 31 percent. At the mapped depth, Sandy ground is not mapped, so we plan boring using the available ground record. These are mapped soil patterns, not test borings, so the actual route still needs field checks.
| USDA soil survey, inside the Richland Springs city limits | What is mapped |
|---|---|
| Soil series mapped | Mereta 35 percent, Sagerton 24 percent, Rowena 13 percent, Frio 10 percent and Nocken 9 percent |
| Texture at the surface | clay loam 73 percent, very stony fine sandy loam 9 percent and silty clay loam 9 percent |
| Texture about 40 inches down | loam 35 percent, clay loam 24 percent and silty clay loam 14 percent |
| Engineering class about 40 inches down | lean clay (CL) 88 percent |
| Average clay content about 40 inches down | 31 percent |
| Bedrock mapped within 60 inches | 10 percent of the area (1 percent hard rock, 9 percent weathered rock) |
| Seasonal water table within 60 inches | 0 percent of the area |
| Flood prone soils | 10 percent of the area |
| High corrosion risk for uncoated steel | 38 percent of the area |
The survey puts typical bedrock depth at 37 inches and maps bedrock within 60 inches across 10 percent of Richland Springs; hard bedrock is mapped across 1 percent. The seasonal water table is not mapped within 60 inches, while flood prone soils cover 10 percent, so Richland Creek routes need channel depth planning. High steel corrosion risk covers 38 percent, a concern for casing and tracer wire that the line owner should address. The geologic map includes Holocene alluvial sand, silt, clay and gravel, with Marble Falls Limestone also mapped; a soil to rock transition can affect steering.
How do crews handle loam in Richland Springs?
In Richland Springs, we match the bore plan to the mapped loam and clay loam, then track the drill head and log depth and pitch as it advances near streets such as Park Avenue.
- Mereta clay loam can stick to the reamer, so we can use thinner drilling fluid, ream in stages and have pipe ready for the pull.
- Where the mapped ground changes toward Marble Falls Limestone, we slow down and check depth and pitch to manage steering at the soil to rock contact.
- We hydrovac pothole every marked utility on a planned bore path before the drill approaches; a proposed route beneath Park Avenue needs each marked line exposed first.
- Near Richland Creek, we plan the bore depth to pass beneath the channel and keep drilling fluid pressure controlled around pavement and entry pits.

Where does a line have to go under the Central Texas and Colorado River Railway in Richland Springs?
Richland Springs has US 190 and FM 45 within its limits, so a route beneath either highway needs a bore plan that accounts for the road surface and right of way. Park Avenue is the longest named street at 1.14 miles, followed by Marion Street at 0.74 miles and Hall Street at 0.65 miles. The town has 13.88 public road centerline miles overall. Boring can leave pavement and driveways uncut, with entry and exit pits placed off the traveled surface where the site allows.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| US 190 | US highway | 1.1 roadway miles inside | State highway office |
| FM 45 | State highway | 0.7 roadway miles inside | State highway office |
| Central Texas and Colorado River Railway | Railroad | 1 track miles inside | The railroad |
| Richland Creek | Stream | 0.21 channel miles inside | Checked for Corps of Engineers jurisdiction |
The Central Texas and Colorado River Railway has 1.0 track mile in Richland Springs, and public records map 5 street and rail crossings. A crossing needs coordination with the railroad that owns the track; its agreement sets the crossing conditions. Richland Creek runs 0.21 channel miles through town, but no street crossings of named streams are mapped. With no lakes or ponds mapped within one mile, we plan the bore route around the mapped water features. A creek route still needs review for federal water jurisdiction during planning.
Whose permission does a Richland Springs bore under US 190 need?
US 190 belongs to the state highway system, so a bore in its right of way needs a TxDOT utility permit reviewed by the TxDOT Brownwood District. The utility that owns the line files through TxDOT’s RULIS system; we prepare the bore plan and profile and work under the permit issued to that owner. FM 45 is also a state highway, so the same state process applies there. TxDOT requires boring or tunneling beneath existing highway pavement, with rural highway crossings extending below all travel lanes. A crossing of the Central Texas and Colorado River Railway needs an agreement from the railroad owner. Richland Creek crossings are checked for U.S. Army Corps of Engineers jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Whose lines are already buried in Richland Springs and San Saba County?
In Richland Springs, we plan underground work with the City of Richland Springs public water system’s groundwater wells and service to 325 people through 198 service connections in mind. Electric service reported in San Saba County includes Oncor Electric Delivery Company, Central Texas Electric Cooperative, Hamilton County Electric Cooperative Association and Pedernales Electric Cooperative. Those reports do not identify the provider at every address, so we confirm the line owner before planning an electric conduit bore near Park Avenue or another route.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of Richland Springs | Public water system | Groundwater wells | 198 connections, 325 people served |
| Oncor Electric Delivery Company, Central Texas Electric Cooperative, Hamilton County Electric Cooperative Association and Pedernales Electric Cooperative | Electric utilities reporting service in San Saba County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put the median housing year in Richland Springs at 1961; 49 percent of homes were built before 1960, and 5 percent in 2000 or later. Older service lines along Marion Street may be replacement work, while newer connections call for a different route plan. Before drilling near marked utilities on the bore path, we hydrovac pothole every one to verify its location. Paint shows a line’s position, not its depth, so a proposed line beneath Hall Street must be exposed before the drill approaches.

How far is Richland Springs from Brownwood and our Yukon yard?
Richland Springs is in San Saba County, with an elevation of 1,404 feet and a land area of 1.0 square mile. Its ZIP code is 76871. San Saba, the county seat, is 14.5 miles east; Rochelle is 15.6 miles west, and Goldthwaite is 25.4 miles northeast. Brownwood, the nearest larger city, is 30.5 miles north. From our Yukon, Oklahoma yard, Richland Springs is 375 road miles away and a 7.8 hour drive, which affects mobilization for work near US 190.
Places near Richland Springs
- Directional boring in San Saba: 14.5 miles east
- Directional boring in Rochelle: 15.6 miles west
- Directional boring in Goldthwaite: 25.4 miles northeast
- Directional boring in Mullin: 25.7 miles northeast
- Directional boring in Brady: 25.8 miles southwest
- Directional boring in Brownwood: 30.5 miles north
What kinds of bores come up near Richland Creek in Richland Springs?
- Highway crossing: A water or conduit bore beneath US 190 uses a plan that accounts for the highway pavement and all travel lanes.
- Street service: A replacement water line near Marion Street can pass beneath pavement, with pits placed in available ground at each end.
- Rail crossing: A proposed route beneath the Central Texas and Colorado River Railway requires an agreement with the track owner.
- Creek crossing: A line beneath Richland Creek needs a depth plan and a check for U.S. Army Corps of Engineers jurisdiction.
- Fiber route: Fiber conduit along Park Avenue can be installed by bore to avoid opening a cut through the street.
- Water connection: A service route near the City of Richland Springs groundwater system starts with confirming the line owner and existing utilities.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What drives the price of directional boring near Park Avenue in Richland Springs?
For a Richland Springs quote, start with the address or map pin, such as a location on Park Avenue. Tell us what will go underground, whether it is water, sewer, gas, electric conduit or fiber, and give the pipe or conduit size and footage. A sketch or plans showing a route toward US 190 help us see the crossings and access points.
Price depends on the route and work involved. Mereta clay loam and the mapped bedrock can affect drilling and reaming; crossings of US 190 or the Central Texas and Colorado River Railway add coordination and construction details. We also account for line exposures, pavement, pits, excavator time and sand backfill. Creek crossings, emergency timing and mobilization from Yukon matter too, with Richland Springs 375 road miles from our main office.
Questions people ask about boring in Richland Springs
Does Trinity Boring Solutions take jobs in Richland Springs and San Saba County?
Yes. We take directional boring and horizontal directional drilling (HDD) work in Richland Springs, including routes near US 190 and the Central Texas and Colorado River Railway. Our work is staffed by our own crews or crews from satellite yards operated by partner drilling contractors we have vetted. You work with Trinity through the bore log.
Who runs Richland Springs public water system, and does it use groundwater wells?
The City of Richland Springs owns the public water system, which uses groundwater wells. Public records list 198 service connections serving 325 people. A planned connection near Park Avenue still needs its route and existing lines checked before drilling.
Which electric utilities report service in Richland Springs and San Saba County?
Oncor Electric Delivery Company, Central Texas Electric Cooperative, Hamilton County Electric Cooperative Association and Pedernales Electric Cooperative report service in San Saba County. The countywide reports do not establish which utility serves a specific Richland Springs address. We confirm the line owner before planning conduit near US 190.
Who controls Richland Springs streets such as Hall Street, and must a bore cut them?
Because Richland Springs is incorporated, we treat city streets as city property when planning boring work. A bore beneath Hall Street can avoid an open cut through the pavement, with pits placed in suitable ground at either end. The route still needs utility exposures before drilling near marked lines.
Do Richland Springs homes near Marion Street have older lines that may need replacement?
The American Community Survey 2019 to 2023 estimates put the median housing year at 1961, with 49 percent of homes built before 1960. That age can make replacement service bores relevant near Marion Street, but the existing line and its depth must be exposed and verified before the route is set.
Are groundwater or flood prone soils a concern for Richland Springs bore pits near Richland Creek?
A seasonal water table is not mapped within 60 inches, but flood prone soils cover 10 percent of Richland Springs. Near Richland Creek, we plan pits and bore depth around the channel and check the crossing for U.S. Army Corps of Engineers jurisdiction during planning.
What bore sizes and lengths can Trinity handle in Richland Springs near Fire Station Street?
For Richland Springs boring, we handle lines from 3/4 inch service lines up to 48 inch casing and bore lengths from 10 feet to 5,000 feet. For a route near Fire Station Street, the line size, footage, soil and nearby crossings determine the equipment and plan.
How much Texas811 notice does a Richland Springs bore near Park Avenue need, and what if marks move?
Count back at least 48 hours from the planned start, excluding Saturdays, Sundays and legal holidays; the request cannot be made more than 14 days ahead. If work slips more than 14 days past the original notice for Park Avenue, submit a new request. When marks are worn or moved, we have them refreshed through Texas811 before we continue work along the bore path.
What affects the cost of a Richland Springs directional bore beneath US 190?
The route, footage and pipe or conduit size matter, along with Mereta clay loam, mapped bedrock, utility exposures and pavement. A US 190 crossing or work near the Central Texas and Colorado River Railway can add coordination. Creek crossings, pits, excavator time, backfill and mobilization from Yukon also shape the job.
Where the Richland Springs facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Richland Springs
- U.S. Census Bureau, TIGER/Line 2024: Richland Springs boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Richland Springs
- U.S. Census Bureau, American Community Survey 2019 to 2023: Richland Springs housing units and year built
- Macrostrat geologic map compilation: map units under Richland Springs
- U.S. EPA Safe Drinking Water Information System: public water systems serving Richland Springs
- U.S. Department of Transportation, North American Rail Network: track owners in San Saba County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving San Saba County
- U.S. Geological Survey, Elevation Point Query Service: Richland Springs elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Richland Springs
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Richland Springs
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Richland Springs, Texas
Type the address of your job in Richland Springs. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Richland Springs
All counties: Texas county list.
