trinityboringsolutions.com

Goldthwaite Texas Directional Boring: Bolar Clay Loam, US 183 and North Fork Bull Creek

Quick Answer: Goldthwaite is an incorporated county seat in Mills County, so the city owns its city streets. Along US 183 or the BNSF Railway, Trinity Boring Solutions takes directional boring, also called horizontal directional drilling (HDD), work in Texas. Goldthwaite is 349 road miles from our Yukon, Oklahoma main office, so mobilization is part of a job near Front Street. The USDA soil survey maps Bolar soil across 54 percent of the city, and clay loam can hold a bore open but stick to the reamer.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Goldthwaite bores at a glance

  • County seat of Mills County, Texas. Population 1,767 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 349 miles, about 7.2 hours of driving.
  • Ground: Bolar soil is mapped on 54 percent of the area, with bedrock about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 86 percent of the area.
  • Highways inside the boundary: US 183, US 84, Texas State Highway 16, FM 572 and FM 574. State permit office: TxDOT Brownwood District.
  • Railroad track inside the boundary: BNSF Railway, with 5 mapped street and rail crossings.
  • Named streams inside the boundary: North Fork Bull Creek.
  • Public water: City of Goldthwaite, surface water.
  • Electric: City of Goldthwaite municipal electric system.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Does anyone do directional boring in Goldthwaite along US 183?

Trinity Boring Solutions takes directional boring work in Goldthwaite, the Mills County seat, where the Census Bureau Vintage 2024 estimate puts the population at 1,767. On US 183, US 84 or Front Street, we install water, sewer, gas, electric conduit and fiber by HDD when the route and site fit.

Our main office is in Yukon, Oklahoma, and Goldthwaite work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. The family business dates to 1965, and we have worked in directional boring since 1982; our equipment range runs from 3/4 inch service lines to 48 inch casing. At a US 183 crossing, length and casing size shape the setup.

Ditch Witch JT922 compact directional drill beside the Trinity Boring Solutions truck at NE 24th Street in Oklahoma City
Our Ditch Witch JT922 compact directional drill beside the Trinity truck on a sleeve bore at NE 24th Street in Oklahoma City. Photos on this page are from our jobs in Oklahoma and Texas.

What kind of ground does Goldthwaite have around Bolar soil?

The USDA soil survey maps Bolar soil across 54 percent of Goldthwaite, including Bolar clay loam on 31 percent and Bolar-Brackett complex on 23 percent. At the surface, gravelly clay loam covers 40 percent and clay loam 34 percent; around 40 inches down, bedrock is the mapped texture across 77 percent of the area. Average clay content at that depth is 34 percent, while sandy ground is not mapped there. These are survey patterns, not test borings, so the route still needs field checks before we select tooling or reaming steps.

USDA soil survey, inside the Goldthwaite city limitsWhat is mapped
Soil series mappedBolar 54 percent, Denton 9 percent, Real 9 percent, Tarpley 8 percent and Krum 7 percent
Texture at the surfacegravelly clay loam 40 percent, clay loam 34 percent and silty clay 16 percent
Texture about 40 inches downbedrock 77 percent, silt loam 9 percent and silty clay 7 percent
Engineering class about 40 inches downlean clay (CL) 12 percent, fat clay (CH) 7 percent and clayey sand (SC) 3 percent
Average clay content about 40 inches down34 percent
Bedrock mapped within 60 inches86 percent of the area (75 percent hard rock, 10 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel20 percent of the area

The USDA survey maps bedrock within 60 inches across 86 percent of Goldthwaite, including hard bedrock across 75 percent and weathered bedrock across 10 percent; typical depth is 30 inches. In Goldthwaite, seasonal water tables and flood prone soils are not mapped, so we account for that uncertainty when planning a bore. High steel corrosion risk covers 20 percent, a concern for steel casing and tracer wire that the line owner can address through material choices. The mapped Walnut Clay unit is Albian clay, limestone and shale, so a route may shift from soil to slower rock drilling.

How do we drill Goldthwaite ground with shallow bedrock?

Goldthwaite’s mapped clay and shallow bedrock call for checking the route before choosing the bit and reaming plan. We adjust fluid and drilling steps to the ground shown around Bolar soil and the specific crossing.

  1. Bolar clay loam: We use staged reaming and manage fluid so sticky clay does not build up on the reamer or grip pipe.
  2. Shallow bedrock: With bedrock typically at 30 inches, we check the ground as the bore advances and allow for slower drilling where hard rock is met.
  3. Creek and street crossings: At North Fork Bull Creek or Front Street, we track depth and pitch from the surface and keep the crossing uncut.
  4. Marked utilities: Near the City of Goldthwaite water and electric systems, we hydrovac expose marked lines before drilling close to them.
Trinity Boring Solutions crew in hard hats at the exit pit with rock tooling on a sandstone bore in Guthrie, OK
Our crew at the exit pit with rock tooling on a sandstone bore in Guthrie, Oklahoma.

What does a bore have to cross in Goldthwaite near Front Street?

US 183 and Texas State Highway 16 each have 4.5 mapped roadway miles inside Goldthwaite; US 84 has 1.7, while FM 572 has 1.0 and FM 574 has 0.7. Front Street is the longest named street at 1.37 miles, followed by Fisher Street at 1.24 miles and 5th Street at 0.88 miles. The city has 38.2 public road centerline miles, so street ownership and any highway right of way are distinct parts of route planning.

CrossingTypeMapped extentWho has a say
US 183US highway4.5 roadway miles insideState highway office
US 84US highway1.7 roadway miles insideState highway office
Texas State Highway 16State highway4.5 roadway miles insideState highway office
FM 572State highway1 roadway miles insideState highway office
FM 574State highway0.7 roadway miles insideState highway office
BNSF RailwayRailroad1.47 track miles insideThe railroad
North Fork Bull CreekStream0.65 channel miles insideChecked for Corps of Engineers jurisdiction
Cryers BranchStream nearby0.2 miles outsideChecked for Corps of Engineers jurisdiction
Prescott CreekStream nearby0.3 miles outsideChecked for Corps of Engineers jurisdiction
East Fork Bull CreekStream nearby0.6 miles outsideChecked for Corps of Engineers jurisdiction
South Browns CreekStream nearby0.8 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

BNSF Railway has 1.47 track miles in Goldthwaite, and public records map 5 street and rail crossings in the city. North Fork Bull Creek runs 0.65 channel miles inside the limits, with 3 mapped street crossings of named streams. A creek route needs depth planning beneath the channel and a jurisdiction check during planning. No lakes or ponds are mapped within one mile, so they do not add another local water crossing.

Whose permission does a Goldthwaite bore in Mills County need?

For work in the right of way of US 183, US 84, Texas State Highway 16, FM 572 or FM 574, TxDOT reviews the utility permit through its Brownwood District. The utility owner, not the drilling contractor, files in TxDOT’s online RULIS system; we prepare the bore plan and profile for its application. TxDOT rules call for boring or tunneling under existing highway pavement, and the permit sets cover and crossing conditions. Work on Goldthwaite city streets is a separate city matter. A bore beneath BNSF Railway track needs the railroad’s crossing agreement, and North Fork Bull Creek is checked for Corps jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

What is already in the ground near the City of Goldthwaite system?

The City of Goldthwaite public water system uses surface water and reports 1,031 service connections serving 1,738 people. The city also owns its municipal electric system, which reports 1,326 customers to EIA. Near Fisher Street, those water and electric lines make locating and exposing marked utilities essential before a drill approaches; the surface marks show position, not burial depth.

Line ownerWhat it isSourceSize
City of GoldthwaitePublic water systemSurface water1,031 connections, 1,738 people served
City of Goldthwaite municipal electric systemCity owned electric systemReports to the U.S. Energy Information Administration1,326 customers reported
Oncor Electric Delivery Company, Comanche County Electric Cooperative Association and Hamilton County Electric Cooperative AssociationElectric utilities reporting service in Mills CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Goldthwaite’s median housing year at 1968: 41 percent of homes were built before 1960, 49 percent from 1960 to 1999 and 10 percent in 2000 or later. Work along Front Street may involve replacing older lines or adding service to newer construction. We hydrovac pothole marked utilities on the planned path before drilling near them, including water and electric lines.

Reel of yellow polyethylene gas pipe on a trailer staged for a directional bore
A reel of yellow polyethylene gas pipe on a trailer, staged for a directional bore.

How far is Goldthwaite from Priddy and our Yukon office?

Goldthwaite is the county seat of Mills County, at an elevation of 1,547 feet across 2.02 square miles. ZIP code 76844 covers the city. Mullin is 9.0 miles northwest, Priddy is 16.0 miles north, and Lometa is 19.4 miles southeast; Brownwood, the nearest larger city, is 29.9 miles northwest. Our Yukon, Oklahoma yard is 349 road miles away, a 7.2 hour drive, which affects crew mobilization for work near US 183 or North Fork Bull Creek.

Places near Goldthwaite

What kinds of bores come up in Goldthwaite near Fisher Street?

  • Highway crossing: A route under US 183 needs a bore plan for TxDOT review and enough room to extend under the highway travel lanes.
  • Water service: A service near the City of Goldthwaite system needs a planned connection and potholing where the route meets marked water lines.
  • Fiber conduit: A fiber drop along Fisher Street can use a bore to pass beneath the paved street without cutting its surface.
  • Creek crossing: A North Fork Bull Creek route needs depth planning beneath the channel and a check for Corps jurisdiction during planning.
  • Rail crossing: A bore under BNSF Railway track requires the railroad’s agreement and plans for the crossing conditions it sets.
  • Electric conduit: Near Front Street, we confirm the line owner and expose marked electric lines before drilling along the proposed path.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What should I send for a Goldthwaite quote near BNSF Railway?

For a Goldthwaite quote, send the address or map pin first, such as a point near Fisher Street or US 183. Tell us what will go in the ground, whether it is water pipe or fiber conduit, then give the pipe or conduit size and expected footage. A sketch or plans showing a BNSF Railway or creek crossing help us assess the route.

The price reflects ground, crossings and logistics rather than footage alone. Bolar clay and shallow bedrock can change tooling and reaming time. A route under US 183 or BNSF Railway adds crossing coordination, while a North Fork Bull Creek bore affects depth planning. We also consider pipe size, length, exposed utilities, pavement, pits, excavator time and backfill. Goldthwaite’s 349 road miles from Yukon affect mobilization, as can emergency timing or a high profile route.

Questions people ask about boring in Goldthwaite

Does Trinity Boring Solutions take jobs in Goldthwaite and Mills County?

Yes. We take directional boring work across Texas, including Goldthwaite, and plan routes around local ground and crossing conditions. The main office is in Yukon, and Goldthwaite jobs are staffed by our own crews or from satellite yards run by partner drilling contractors we have vetted. You work with Trinity through the bore log, including on a route near US 183.

How much bedrock is mapped near the surface in Goldthwaite?

Bedrock is mapped within 60 inches across 86 percent of Goldthwaite, with hard bedrock across 75 percent and weathered bedrock across 10 percent. The USDA survey gives a typical depth of 30 inches. Those mapped patterns are not a test of a particular route, so a bore near Bolar soil still needs site specific planning.

Who approves a Goldthwaite bore under US 183?

TxDOT’s Brownwood District reviews the utility permit for work in the US 183 right of way. The utility owner submits the application in TxDOT’s RULIS system, and we prepare the bore plan and profile for that filing. A crossing beneath existing highway pavement is installed by boring or tunneling under TxDOT rules.

What must we plan for when boring under BNSF Railway in Goldthwaite?

A crossing beneath BNSF Railway track needs an agreement from the railroad that owns it. That agreement establishes crossing conditions such as casing, depth and flagging. Goldthwaite has 1.47 track miles inside the city, so the route and railroad requirements need to be reviewed before a bore is planned.

Can a line be bored under North Fork Bull Creek in Goldthwaite?

A bore can be planned beneath North Fork Bull Creek, subject to route conditions and a jurisdiction check during planning. The creek has 0.65 channel miles in Goldthwaite and 3 mapped street crossings of named streams are recorded in the city. We plan the bore depth to pass beneath the channel.

Who owns Goldthwaite’s public water system, and does it rely on surface water?

The City of Goldthwaite owns its public water system and uses surface water, which we account for in underground planning. Goldthwaite’s public system has 1,031 service connections serving 1,738 people, figures we consider when sizing underground utility work. For a bore near Front Street, marked water lines on the proposed path need to be exposed before drilling close to them.

How early should I call Texas811 for a Goldthwaite bore near Front Street?

For a bore near Front Street, submit the Texas811 locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. For Goldthwaite work, if our start slips more than 14 days past the original notice, we make a new request. Before we continue Goldthwaite work, we refresh worn or moved marks through Texas811.

Does Goldthwaite’s distance from Brownwood affect a job from Yukon?

Brownwood is 29.9 miles northwest of Goldthwaite, while our Yukon, Oklahoma main office is 349 road miles away and a 7.2 hour drive. That distance can affect mobilization for work near US 84 or North Fork Bull Creek. Send the route and scope so we can account for the job logistics.

What affects the cost of directional boring in Goldthwaite under US 183?

The cost depends on the route and scope, including bore length, pipe or conduit size, ground, exposed utilities, pavement and crossing needs. Bolar clay and mapped shallow bedrock can affect drilling time; a US 183 crossing adds highway planning, and mobilization from Yukon matters for Goldthwaite. Creek crossings, pits, backfill and emergency timing can also change the work.

Where the Goldthwaite facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Goldthwaite

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Goldthwaite, Texas

Type the address of your job in Goldthwaite. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Goldthwaite

All counties: Texas county list.