Ross Texas Directional Boring: Riesel Soil, Interstate 35 and Union Pacific
Quick Answer: Ross is a small incorporated city, so the city owns its streets; we take directional boring, also called horizontal directional drilling (HDD), for crossings of Interstate 35 and White Oak Road. The Yukon, Oklahoma main office is 287 road miles away, with Ross Road and the Union Pacific track among local route constraints. Riesel gravelly fine sandy loam is common around Ross. Clay mapped about 40 inches down can grip a reamer, so staged passes matter in Riesel soil.
Ross bores at a glance
- Incorporated city in McLennan County, Texas. Population 199 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 287 miles, about 5.5 hours of driving.
- Ground: Riesel soil is mapped on 28 percent of the area, with clay about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 1 percent of the area.
- Highways inside the boundary: Interstate 35, US 77 and FM 3149. State permit office: TxDOT Waco District.
- Railroad track inside the boundary: Union Pacific, with 1 mapped street and rail crossings.
- Public water: Ross Water Supply Corporation, groundwater wells.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who can I call for directional boring on White Oak Road in Ross?
Ross is a small incorporated city, so its streets belong to the city itself. Ross is in McLennan County, and the Census Bureau Vintage 2024 estimate puts its population at 199. We install water, sewer, gas, electric conduit and fiber lines, including service runs along White Oak Road or connections near Interstate 35. The route and line owner determine the crossing plan.
Our main office is in Yukon, Oklahoma, and Ross work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We are a family business that began in 1965 and have focused on directional boring since 1982. Four decades of boring inform how we plan for Ross’s mapped clay and gravelly fine sandy loam.

What is Riesel soil like to bore in Ross?
Ross soil includes Riesel gravelly fine sandy loam, mapped across 28 percent of the city, along with Mabank and Wilson soils. The USDA soil survey maps clay in 55 percent of the area at about 40 inches below the surface, and very gravelly clay in another 28 percent. Average clay content at that depth is 43 percent. These are mapped soil patterns, not test borings, but they point to sticky cuttings that can build on a reamer and clay that may grip the pipe.
| USDA soil survey, inside the Ross city limits | What is mapped |
|---|---|
| Soil series mapped | Riesel 28 percent, Mabank 21 percent, Wilson 19 percent, Chazos 14 percent and Houston Black 10 percent |
| Texture at the surface | fine sandy loam 29 percent, gravelly fine sandy loam 28 percent and clay loam 19 percent |
| Texture about 40 inches down | clay 55 percent, very gravelly clay 28 percent and sandy clay loam 14 percent |
| Engineering class about 40 inches down | fat clay (CH) 35 percent, clayey gravel (GC) 28 percent and lean clay (CL) 21 percent |
| Average clay content about 40 inches down | 43 percent |
| Bedrock mapped within 60 inches | 1 percent of the area (0 percent hard rock, 1 percent weathered rock) |
| Seasonal water table within 60 inches | 0 percent of the area |
| Flood prone soils | 0 percent of the area |
| High corrosion risk for uncoated steel | 56 percent of the area |
The USDA soil survey maps bedrock within 60 inches in only 1 percent of Ross, so it is not mapped in the top five feet across most of the city. Because seasonal water table and flood prone soils are not mapped, we plan boring depths carefully. High steel corrosion risk covers 56 percent of the area, a concern for uncoated casing and tracer wire that the line owner should consider. The mapped Pleistocene alluvium includes clay, silt, sand and gravel, while Late Cretaceous sedimentary ground is also mapped; changes between materials can affect steering and reaming.
How do crews handle clay in Ross?
Ross soil maps show substantial clay and gravelly clay at about 40 inches. We use that local pattern to plan fluid, reaming and utility exposure, then track the drill head as the bore advances.
- In Ross’s clay mapped at about 40 inches, we use thinner fluid with polymer and ream in stages to limit sticky buildup on the reamer.
- Because Ross has heavy clay across much of the mapped area, we watch fluid returns and keep pressure controlled near pavement to avoid lifting it.
- Where Riesel gravelly fine sandy loam or gravel is present, we stage the reaming and have the pipe ready before the final pass.
- Before a bore near White Oak Road, we hydrovac pothole marked utilities on the route, then track the drill head and log depth and pitch.

Which roads, tracks or creeks could a bore cross in Ross near White Rock Creek?
Interstate 35, US 77 and FM 3149 run inside Ross, so a route may involve a state or federal highway corridor as well as city streets. White Oak Road and Tours Road are the longest named streets, with Ross Road also among the longer routes in the city. With Ross incorporated, we coordinate boring beneath its city streets with the city before planning each crossing. A bore beneath existing highway pavement uses a bored or tunneled installation rather than an open cut.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| Interstate 35 | Interstate | 1.9 roadway miles inside | State highway office |
| US 77 | US highway | 1.9 roadway miles inside | State highway office |
| FM 3149 | State highway | 2.2 roadway miles inside | State highway office |
| Union Pacific | Railroad | 0.44 track miles inside | The railroad |
| White Rock Creek | Stream nearby | 0.3 miles outside | Checked for Corps of Engineers jurisdiction |
| Little Tehuacana Creek | Stream nearby | 0.4 miles outside | Checked for Corps of Engineers jurisdiction |
Union Pacific has 0.44 track miles inside Ross, and public mapping shows one street and rail crossing in the city. A crossing under that track needs an agreement from Union Pacific covering the crossing conditions. White Rock Creek is 0.3 miles from the city limits, and Little Tehuacana Creek is 0.4 miles away. Public mapping shows no street crossings of named streams inside Ross, so a creek route would need separate site planning.
Do I need a permit to bore under Interstate 35 in Ross?
A bore under Interstate 35 in Ross right of way needs a TxDOT utility permit reviewed by the TxDOT Waco District. The utility owner, not Trinity, submits the application through TxDOT’s RULIS system; we prepare the bore plan and profile for that filing. TxDOT rules require boring or tunneling beneath existing highway pavement, and rural highway crossings extend beneath all travel lanes. A Union Pacific track crossing needs an agreement from the railroad. A White Rock Creek crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Which utilities should I check before boring in Ross, McLennan County?
Ross Water Supply Corporation runs the public water system, using groundwater wells and reporting 937 service connections for 2,811 people. For a bore near its water lines, we expose marked utilities before drilling close to them. Utilities reporting electric service in McLennan County include Oncor Electric Delivery Company, Texas-New Mexico Power, HILCO Electric Cooperative, Heart of Texas Electric Cooperative and Navasota Valley Electric Cooperative. We confirm the electric line owner for the route before planning conduit.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| Ross Water Supply Corporation | Public water system | Groundwater wells | 937 connections, 2,811 people served |
| Oncor Electric Delivery Company, Texas-New Mexico Power, HILCO Electric Cooperative, Heart of Texas Electric Cooperative and Navasota Valley Electric Cooperative | Electric utilities reporting service in McLennan County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put Ross’s median housing year at 1987; 11 percent of homes were built before 1960, 64 percent from 1960 to 1999 and 25 percent in 2000 or later. That mix can mean replacement work as well as newer service connections near White Oak Road. Before drilling, hydrovac potholing exposes marked lines on the bore path; locate paint shows position, not depth.

Do you cover Ross and nearby West?
Ross is a 1.54 square mile city in McLennan County, at an elevation of 572 feet, with ZIP codes 76640 and 76691. West is 5.3 miles north, Leroy is 5.4 miles east, and Lacy-Lakeview is 6.7 miles south. Waco, the county seat, is 12.6 miles south. Our Yukon, Oklahoma main office is 287 road miles away, about a 5.5 hour drive; that distance is part of planning a Ross job near Interstate 35.
Places near Ross
- Directional boring in West: 5.3 miles north
- Directional boring in Leroy: 5.4 miles east
- Directional boring in Lacy-Lakeview: 6.7 miles south
- Directional boring in Gholson: 7.5 miles west
- Directional boring in Bellmead: 8.8 miles south
What would we bore near Ross Road in Ross?
- Highway crossing: A route beneath Interstate 35 needs a bored installation planned for the highway corridor and the required TxDOT review.
- Water service: A connection near White Oak Road may tie into Ross Water Supply Corporation’s groundwater system, with marked lines exposed first.
- Fiber route: A conduit run along Ross Road can be planned around the street and nearby marked utilities.
- Rail crossing: A route beneath the Union Pacific track needs the railroad’s agreement for the crossing conditions.
- Creek approach: A route toward White Rock Creek needs planning for the channel and a check of federal jurisdiction.
- Electric conduit: Before a conduit bore near FM 3149, we confirm the line owner among the utilities reporting service in McLennan County.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What drives the price of a Ross bore near Union Pacific?
To quote a Ross job, send the address or map pin, what is going in the ground, the pipe or conduit size and the footage; a sketch or plans help. A route along Ross Road may differ from one that crosses Interstate 35 or the Union Pacific track, so show crossings and access on the sketch.
A short, direct run along White Oak Road with clear access is simpler to plan than a route through Ross’s gravelly clay or beneath Interstate 35. Length and pipe size matter, as do soil, exposed utilities, pavement, creek crossings, pits and excavator time. A Union Pacific crossing adds coordination, and the 287 road miles from Yukon affect mobilization. High profile or emergency work also changes the planning needs.
Questions people ask about boring in Ross
Does Trinity take directional boring jobs in Ross, McLennan County, and how are crews assigned?
Yes, Trinity Boring Solutions takes directional boring work in Ross and across Texas. Work is handled by our own crews and through satellite yards run by partner drilling contractors we have vetted. Ross customers work with Trinity from the first call through the bore log, regardless of which crew is on site.
Who approves a bore under Interstate 35 in Ross, and which state office reviews it?
TxDOT reviews a utility permit for work in the Interstate 35 right of way through its Waco District. The line owning utility submits the application in RULIS, while we prepare the bore plan and profile. For existing highway pavement, we follow TxDOT rules and bore or tunnel beneath it when planning a crossing.
What does a Ross bore under the Union Pacific track require?
A crossing beneath the Union Pacific track in Ross needs an agreement from the railroad that owns it. That agreement establishes crossing conditions such as casing, depth and flagging. Public mapping shows 0.44 track miles in the city and one street and rail crossing.
Can a line be bored under White Rock Creek near Ross?
A line can be planned beneath White Rock Creek, but the route and crossing conditions need review before drilling. The creek is 0.3 miles from Ross city limits, and creek crossings are checked for U.S. Army Corps of Engineers jurisdiction during planning.
For our Ross work, who runs its public water system, and where does its water come from?
Ross Water Supply Corporation runs the public water system, and its source is groundwater wells. Public records report 937 service connections serving 2,811 people. We identify and expose marked water lines before drilling near a proposed route along Ross Road or another city street.
Which electric providers report service in McLennan County, and who confirms Ross conduit specs?
Oncor Electric Delivery Company, Texas-New Mexico Power, HILCO Electric Cooperative, Heart of Texas Electric Cooperative and Navasota Valley Electric Cooperative report electric service in McLennan County. The line owner for the specific Ross route must be confirmed before conduit planning, including near FM 3149.
How early should I request Texas811 marks for a Ross bore on White Oak Road?
Count back at least two working days from the planned start on White Oak Road, excluding Saturdays, Sundays and legal holidays; the request cannot be made more than 14 days ahead. If the start slips more than 14 days after the original notice, submit a new request. We have worn or moved marks refreshed through Texas811 before we continue work in Ross.
How far is Ross from Lacy-Lakeview, and does Yukon distance affect a job?
Ross is 6.7 miles north of Lacy-Lakeview, its nearest larger city. The Yukon, Oklahoma main office is 287 road miles away, about a 5.5 hour drive. That distance can affect mobilization for a bore near Interstate 35 or the Union Pacific track.
What affects the cost of directional boring in Ross near Interstate 35?
The job route and scope determine the price, including length, pipe size, soil, utility crossings, pavement, pits and equipment time. Ross’s gravelly clay can affect the drilling plan, while an Interstate 35 or Union Pacific crossing adds coordination. Mobilization from Yukon is another job factor.
Where the Ross facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Ross
- U.S. Census Bureau, TIGER/Line 2024: Ross boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Ross
- U.S. Census Bureau, American Community Survey 2019 to 2023: Ross housing units and year built
- Macrostrat geologic map compilation: map units under Ross
- U.S. EPA Safe Drinking Water Information System: public water systems serving Ross
- U.S. Department of Transportation, North American Rail Network: track owners in McLennan County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving McLennan County
- U.S. Geological Survey, Elevation Point Query Service: Ross elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Ross
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Ross
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Ross, Texas
Type the address of your job in Ross. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Ross
Same county: Waco · Hewitt · Robinson · Woodway · McGregor · Beverly Hills · Mart · Lorena · Moody · Bruceville-Eddy · China Spring · Riesel. All counties: Texas county list.
