trinityboringsolutions.com

Round Top Texas Directional Boring: Carbengle Soil, Cummins Creek, Highway 237

Quick Answer: Washington Street and Mill Street are Round Top’s longest named streets, and Texas State Highway 237 is among the routes inside its 9.71 public road miles. Trinity Boring Solutions handles directional boring, also called horizontal directional drilling (HDD), in Round Top, including work beneath Texas State Highway 237. The Yukon main office is 424 road miles away, so a job near Cummins Creek needs mobilization planned with the route. Carbengle sandy clay loam is common, and its clay can cling to tooling and grip pipe.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Round Top bores at a glance

  • Incorporated city in Fayette County, Texas. Population 95 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 424 miles, about 8.4 hours of driving.
  • Ground: Carbengle soil is mapped on 36 percent of the area, with bedrock about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 57 percent of the area.
  • Highways inside the boundary: Texas State Highway 237 and FM 1457. State permit office: TxDOT Yoakum District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Cummins Creek and Boggy Branch.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who does directional boring in Round Top and Fayette County?

Washington Street and Mill Street lead Round Top’s named street lengths, while Texas State Highway 237 lies within the town’s 9.71 public road miles. The Census Bureau Vintage 2024 estimate puts the Fayette County town’s population at 95. We install water, sewer, gas, electric conduit and fiber along routes such as Live Oak Street or beneath the highway, with the route set by the job.

Our main office is in Yukon, Oklahoma, and Round Top work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our equipment range covers a 3/4 inch service line near Live Oak Street through a 48 inch casing beneath Texas State Highway 237. Our family business started in 1965, and we have done directional boring since 1982, for small service work as well as larger crossings.

Compact Ditch Witch drill rig boring a new utility line across a front yard on a residential street in Edmond, Oklahoma
Our compact Ditch Witch drill boring a new utility line across a front yard on a residential street in Edmond, Oklahoma. Photos on this page are from our jobs in Oklahoma and Texas.

What kind of ground does Round Top’s Carbengle soil bring?

The USDA soil survey maps Carbengle across 36% of Round Top, with Carbengle sandy clay loam on 29% of the mapped area. At about 40 inches below the surface, the survey maps bedrock across 44% of the area and sandy clay loam across 25%; clay accounts for 20%. Sandy ground is mapped across only 2% at that depth. We treat Carbengle, Knolle, Flatonia, and Renish as mapped soil patterns, not test borings along a planned bore path. Where the Carbengle clay is present, it can ball up on a reamer and cling to pipe, so the drilling fluid and reaming sequence need to suit the ground.

USDA soil survey, inside the Round Top city limitsWhat is mapped
Soil series mappedCarbengle 36 percent, Knolle 14 percent, Flatonia 13 percent, Renish 8 percent and Brenham 7 percent
Texture at the surfacesandy clay loam 36 percent, fine sand 14 percent and loam 13 percent
Texture about 40 inches downbedrock 44 percent, sandy clay loam 25 percent and clay 20 percent
Engineering class about 40 inches downfat clay (CH) 27 percent, silty clayey sand (SC SM) 14 percent and lean clay (CL) 11 percent
Average clay content about 40 inches down36 percent
Bedrock mapped within 60 inches57 percent of the area (8 percent hard rock, 49 percent weathered rock)
Seasonal water table within 60 inches7 percent of the area
Flood prone soils9 percent of the area
High corrosion risk for uncoated steel32 percent of the area

The USDA soil survey maps bedrock within 60 inches across 57% of Round Top, typically at 34 inches; most of that mapped bedrock is weathered, while hard bedrock is mapped across 8%. The Oakville Sandstone unit is Miocene age and includes sandstone and clay, so a bore may slow at a soil to rock contact. Seasonal water table is mapped within 60 inches across 7%, and flood prone soils across 9%, including areas to consider near Cummins Creek. High steel corrosion risk is mapped across 32%, which the line owner should weigh for steel casing and tracer wire; the owner selects any coating.

What does it take to bore Round Top’s bedrock and clay?

Carbengle soil and the mapped Oakville Sandstone call for a plan that can change with the material. We track the drill head from the surface and log depth and pitch near Round Top streets and crossings.

  1. Carbengle sandy clay loam can load up a reamer, so we use staged reaming and fluid suited to clay, then pull the pipe while the hole is ready.
  2. Where the mapped Oakville Sandstone reaches the bore, we slow down and watch the soil to rock contact, which can push the drill head off line.
  3. Near pavement on Washington Street, we keep fluid pressure controlled so it does not lift the surface, and use a walkover locator to check depth and pitch.
  4. At a Cummins Creek route, we plan below the channel and check jurisdiction during planning; shallow wet ground may call for smaller pits and pumping.
Trinity Boring Solutions crew in hard hats at the exit pit with rock tooling on a sandstone bore in Guthrie, OK
Our crew at the exit pit with rock tooling on a sandstone bore in Guthrie, Oklahoma.

What does a bore have to cross on Round Top’s Washington Street?

Texas State Highway 237 has 1.6 mapped roadway miles inside Round Top, and FM 1457 has 0.4. Those routes call for a crossing plan that accounts for pavement and the right of way. Washington Street is the longest named street at 0.98 miles, followed by Mill Street at 0.96 and Bauer Rummel Road at 0.54. A bore beneath one of these streets can leave the pavement uncut, with entry and exit pits placed in dirt where the site allows.

CrossingTypeMapped extentWho has a say
Texas State Highway 237State highway1.6 roadway miles insideState highway office
FM 1457State highway0.4 roadway miles insideState highway office
Cummins CreekStream1.17 channel miles insideChecked for Corps of Engineers jurisdiction
Boggy BranchStream0.1 channel miles insideChecked for Corps of Engineers jurisdiction
Shaw CreekStream nearbyAlong the boundaryChecked for Corps of Engineers jurisdiction
Rocky CreekStream nearby0.2 miles outsideChecked for Corps of Engineers jurisdiction
Kuhn BranchStream nearby0.5 miles outsideChecked for Corps of Engineers jurisdiction
Bell BranchStream nearby0.9 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Round Top or within 1 mile outside its limits, and no street and rail crossing is mapped in town. Cummins Creek runs 1.17 channel miles inside the limits, while Boggy Branch runs 0.1. Public mapping records two street crossings of named streams in town, but does not specify which streets. There are no lakes or ponds mapped within 1 mile. A creek route needs depth planning, and its jurisdiction is checked during planning.

Who has to sign off on Round Top’s Texas State Highway 237?

Texas State Highway 237 belongs to the state, and work in its right of way needs a TxDOT utility permit reviewed by the TxDOT Yoakum District. The utility that owns the line submits the application through TxDOT’s RULIS system; we prepare the bore plan and profile and work under the owner’s permit. TxDOT rules call for boring or tunneling beneath existing highway pavement, with crossings encased and the bore extending under all travel lanes on rural highways. Round Top is an incorporated town, so we treat Washington Street as a city street when planning boring work. For a Cummins Creek crossing, planning checks whether the U.S. Army Corps of Engineers has jurisdiction.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Whose lines are already buried in Round Top and Fayette County?

EPA drinking water records do not tie a provider to a specific Round Top address, so the water provider for the address has to be confirmed with the city, county or local water district before a bore is planned. In Fayette County, Bluebonnet Electric Cooperative, Fayette Electric Cooperative, Guadalupe Valley Electric Cooperative and San Bernard Electric Cooperative report electric service. Those county reports do not identify the provider at every address; the line owner must be confirmed before planning a conduit bore near Washington Street.

Line ownerWhat it isSourceSize
Bluebonnet Electric Cooperative, Fayette Electric Cooperative, Guadalupe Valley Electric Cooperative and San Bernard Electric CooperativeElectric utilities reporting service in Fayette CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

In Round Top, the 2019 to 2023 five year estimates place the median housing year at 1969; we plan around existing streets. The estimates show 44% of homes built before 1960 and 26% built in 2000 or later. That mix means a Mill Street job could involve replacing an older service or adding a newer connection, but the age of a home does not establish the location or condition of a buried line. On bore paths near Cummins Creek, we hydrovac pothole every marked utility before drilling nearby; paint shows position, not depth.

Mini excavator digging beside a pad mounted electrical transformer with red dirt spoil and a vacuum excavation trailer on site
Digging beside a pad mounted electric transformer with a vacuum excavation trailer on site.

How far is Round Top from Burton and other nearby places?

Round Top is an incorporated town in Fayette County, with an elevation of 422 feet and a land area of 0.95 square miles. Its ZIP code is 78954. Carmine is 5.9 miles north, Burton is 10.1 miles northeast, Fayetteville is 11.0 miles south, Industry is 13.6 miles southeast and La Grange is 15.0 miles southwest; La Grange is the county seat. Giddings, the nearest larger city, is 16.2 miles northwest. From our Yukon, Oklahoma main office, the road distance is 424 miles and the drive is 8.4 hours, which is part of planning work near Round Top.

Places near Round Top

What would we bore near Round Top’s Cummins Creek?

  • Highway crossing: A bore beneath Texas State Highway 237 needs a route and profile that account for pavement, travel lanes and the TxDOT right of way.
  • Water service: A service near Live Oak Street starts with confirming the address provider and the line route before choosing the bore path.
  • Fiber conduit: A route along Washington Street can pass beneath pavement without opening a trench through the street.
  • Creek crossing: A Cummins Creek bore needs channel depth planning and a jurisdiction check during planning.
  • Street replacement: A Mill Street replacement can use a bore to avoid cutting the street, with marked utilities exposed before the drill approaches them.
  • Acreage service: A longer route outside the Round Top limits near Carmine needs its own map pin, footage and crossing review.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

How do I get a quote for a bore near Round Top’s Live Oak Street?

For a Live Oak Street service, start with the address or map pin, then tell us what is going in the ground. Give us the pipe or conduit size and the footage, such as a short service run or a longer route under Texas State Highway 237. A sketch or plans help us see the route, pits and nearby crossings.

The job details shape the price. Ground factors include Carbengle clay and possible weathered sandstone; crossing factors include pavement on Texas State Highway 237, exposed utilities and Cummins Creek drainage. Logistics include pit work, excavator time, sand backfill and mobilization from the Yukon office, 424 road miles away. Length and pipe size matter too, as do concrete, the number of lines crossed, and any high profile or emergency requirements.

Questions people ask about boring in Round Top

Does Trinity take directional boring work in Round Top and Fayette County, and who staffs it?

Yes. We take directional boring work in Round Top, and the job is handled by our own crews or crews from satellite yards run by drilling contractors we have vetted. The customer works with Trinity from the first call through the bore log, whether the crew is near Live Oak Street or another Fayette County route.

Does the TxDOT Yoakum District approve a bore under Texas State Highway 237 in Round Top?

TxDOT reviews the utility permit for Texas State Highway 237 through its Yoakum District. The utility that owns the line files the application in TxDOT’s RULIS system, and we prepare the bore plan and profile for that filing. Highway pavement crossing work is planned as a bore or tunnel, not an open trench.

Can a line be bored under Cummins Creek in Round Top?

A bore can be planned beneath Cummins Creek, which has 1.17 channel miles inside Round Top. The route and depth have to be designed for the channel, and planning checks whether the U.S. Army Corps of Engineers has jurisdiction. Site conditions and the line owner’s requirements shape the final crossing plan.

Which electric companies report service in Fayette County near Round Top, and who confirms conduit details?

Bluebonnet Electric Cooperative, Fayette Electric Cooperative, Guadalupe Valley Electric Cooperative and San Bernard Electric Cooperative report service in Fayette County. Those records do not identify the provider for every Round Top address. The line owner for the specific route, such as one near Mill Street, needs to confirm conduit specifications before a bore is planned.

Who controls Bauer Rummel Road in Round Top, and does a bore require cutting it?

Round Top is incorporated, so streets within its limits belong to the city. A bore beneath Bauer Rummel Road can pass below the pavement rather than cutting across it; entry and exit pits still need suitable locations. Marked utilities on the route are exposed before drilling near them.

What do Round Top’s Mill Street housing ages mean for replacement bores?

The American Community Survey 2019 to 2023 five year estimates give Round Top a median housing year of 1969, with 44% of homes built before 1960. That can make replacement work relevant on Mill Street, but home age does not locate a buried line. We check marked utilities before the drill approaches them.

Does Trinity cover Carmine and rural sites outside Round Top?

Yes. We take work in Texas beyond Round Top, including Carmine and rural routes outside town limits. Carmine is 5.9 miles north of Round Top, but the route, access and footage still need to be reviewed for each address. Trinity remains the contact through the bore log, whichever crew is on site.

How much 811 notice is needed for a Round Top bore near Washington Street, and what about the marks?

For a Washington Street bore, Texas law requires a Texas811 locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before it. If a bore start near Bauer Rummel Road slips more than 14 days past the original notice, we submit a new request. If marks along Mill Street wear off or move, we refresh them through Texas811 before continuing boring work.

What affects the price of directional boring under Texas State Highway 237 in Round Top?

The route and scope determine the price, including length, pipe or conduit size, Carbengle clay or sandstone, pavement, utility crossings and pit work. A Texas State Highway 237 crossing also brings permit planning into the job, while Cummins Creek drainage can affect the route. Mobilization from the Yukon office is another consideration for Round Top work.

Where the Round Top facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Round Top

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Round Top, Texas

Type the address of your job in Round Top. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Round Top

Same county: Schulenburg · Flatonia · Ellinger · Plum. All counties: Texas county list.