Van Horn Texas Directional Boring: Double Loam, Interstate 10 and Union Pacific
Quick Answer: At the top five feet, the USDA soil survey maps Double loam with clay loam at about 40 inches; bedrock is not mapped there. We take directional boring, also called horizontal directional drilling (HDD), for lines crossing Interstate 10 and Van Horn streets. The Yukon main office is 613 road miles away, and a bore along Frontage Road needs mobilization planned around that distance. Clay loam can hold the hole and cling to the reamer, so staged reaming and ready pipe matter.
Van Horn bores at a glance
- County seat of Culberson County, Texas. Population 2,011 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 613 miles, about 11.6 hours of driving.
- Ground: Double soil is mapped on 100 percent of the area, with clay loam about 40 inches down.
- Rock: no bedrock is mapped in the top 60 inches.
- Highways inside the boundary: Interstate 10, Interstate 10 Business, US 90, FM 2185 and Texas State Highway 54. State permit office: TxDOT El Paso District.
- Railroad track inside the boundary: Union Pacific, with 3 mapped street and rail crossings.
- Public water: City of Van Horn, groundwater wells.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Which contractor handles directional boring near Interstate 10 in Van Horn?
What does the top five feet look like in Van Horn? The USDA soil survey maps Double loam, with clay loam at about 40 inches. The Census Bureau Vintage 2024 estimate puts the town at 2,011 people in Culberson County. We can bore water, sewer, gas, electric conduit or fiber beneath Aster Street or Frontage Road, with the route planned around the marked lines there.
Our main office is in Yukon, Oklahoma, and Van Horn work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore is roughly 4,100 feet of 48 inch pipe under the Arkansas River in Tulsa. A typical Van Horn job would be much shorter, such as a service crossing beneath Desert Street. As a family business, we started in 1965 and have provided directional boring in Van Horn since 1982.

What does the soil survey show under Van Horn’s Double soil?
The USDA soil survey maps the Double series across Van Horn, with Double loam, 1 to 8 percent slopes. At about 40 inches below the surface, the mapped texture is clay loam and average clay content is 30 percent; the surface texture is loam. Sandy and gravelly ground are not mapped at that depth. These mapped patterns are not a reading from a bore. For a crossing under US 90, clay loam can stay around the hole, but it may stick to the reamer and grip pipe, so the tool and fluid plan matter.
| USDA soil survey, inside the Van Horn city limits | What is mapped |
|---|---|
| Soil series mapped | Double 100 percent |
| Texture at the surface | loam 100 percent |
| Texture about 40 inches down | clay loam 100 percent |
| Engineering class about 40 inches down | lean clay (CL) 100 percent |
| Average clay content about 40 inches down | 30 percent |
| Bedrock mapped within 60 inches | None mapped |
| Seasonal water table within 60 inches | 0 percent of the area |
| Flood prone soils | 0 percent of the area |
| High corrosion risk for uncoated steel | 0 percent of the area |
For Van Horn, the soil survey does not map bedrock in the top five feet, seasonal water within 60 inches, flood prone soils or high steel corrosion risk. That is useful for pit planning, but it does not rule out rock deeper down. The geologic map includes Cenozoic alluvial fan deposits of coarse alluvium and Mesoproterozoic sedimentary rocks. Those mapped units call for checking the actual ground as drilling advances, rather than assuming one material continues along every Frontage Road bore.
What does it take to bore Van Horn’s clay loam?
Double loam is mapped across Van Horn, and its clay loam layer can hold a hole while sticking to tooling. We match fluid, reaming and pipe timing to that ground and the route under local streets.
- The mapped clay loam in Van Horn can hold an open hole and cling to the reamer. We use thinner fluid and polymer, then ream in stages.
- On a Double loam crossing beneath Frontage Road, we plan to pull pipe the same day the hole is opened to limit the time clay can grip it.
- Before drilling near a marked line on Aster Street, we expose it with hydrovac potholing. The paint marks position, not depth.
- As a bore advances through Van Horn ground, we track the drill head from the surface and log depth and pitch to check the route.

Which roads, tracks or creeks could a Van Horn bore cross near Carrizo Creek?
Interstate 10 has 6.0 mapped roadway miles inside Van Horn, alongside Interstate 10 Business, US 90, FM 2185 and Texas State Highway 54. That gives a bore route several highway corridors to account for, with pavement crossings planned without open trenching through the existing road. Frontage Road is the longest named street at 3.43 miles in town. Airport Road measures 2.39 miles and Aster Street 2.24 miles, so a service route may need to pass beneath local pavement or driveways as well.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| Interstate 10 | Interstate | 6 roadway miles inside | State highway office |
| Interstate 10 Business | Interstate | 2.4 roadway miles inside | State highway office |
| US 90 | US highway | 1.1 roadway miles inside | State highway office |
| FM 2185 | State highway | 4.6 roadway miles inside | State highway office |
| Texas State Highway 54 | State highway | 1.6 roadway miles inside | State highway office |
| Union Pacific | Railroad | 1.51 track miles inside | The railroad |
| Carrizo Creek | Stream nearby | 0.2 miles outside | Checked for Corps of Engineers jurisdiction |
| Hackberry Creek | Stream nearby | 0.5 miles outside | Checked for Corps of Engineers jurisdiction |
Union Pacific has 1.51 track miles inside Van Horn on the Toyah Subdivision, and three mapped street and rail crossings mean a route can meet rail infrastructure. Carrizo Creek is 0.2 miles from the town limits and Hackberry Creek is 0.5 miles away. No named stream street crossings are mapped inside town. Van Horn also has 0.88 miles of unnamed drainage, so a route near a drainage feature needs its own crossing review; no lakes or ponds are mapped within one mile.
Who approves a Van Horn bore near Union Pacific or a highway?
For a bore in Van Horn street limits, the streets are city streets because the town is incorporated. Work in Interstate 10, US 90, FM 2185, Texas State Highway 54 or another named state highway right of way needs a TxDOT utility permit. The line owner, not the drilling contractor, files through RULIS, and the TxDOT El Paso District reviews it. We give the utility owner the bore plan and profile, then work under the permit issued to that owner. Required cover varies by line type, and the district can set a different depth in the permit.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Whose lines are already buried in Van Horn and Culberson County?
The City of Van Horn public water system serves 2,063 people through 1,376 service connections and draws from groundwater wells. That makes water lines a practical part of planning a bore along Aster Street or Frontage Road. El Paso Electric, Oncor Electric Delivery Company and Rio Grande Electric Cooperative report electric service in Culberson County. We confirm which utility owns a line on the route before planning an electric conduit bore, rather than assuming one provider serves every address.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of Van Horn | Public water system | Groundwater wells | 1,376 connections, 2,063 people served |
| El Paso Electric, Oncor Electric Delivery Company and Rio Grande Electric Cooperative | Electric utilities reporting service in Culberson County | EIA Form 861 | Confirm the line owner by address |
American Community Survey 2019 to 2023 five year estimates put Van Horn’s median housing year at 1973; 17 percent of homes were built before 1960, while 6 percent date to 2000 or later. Work along Desert Street could involve replacing older service lines or adding service to newer construction. On Van Horn bore paths, we hydrovac pothole every marked utility before drilling near it. For example, a planned line under Aster Street needs marked lines exposed because paint shows position, not depth.

Do you cover Van Horn and nearby Sierra Blanca?
Van Horn is the Culberson County seat, at an elevation of 4,049 feet, and covers 2.84 square miles. Its ZIP code is 79855. Sierra Blanca is 31.5 miles west, and Valentine is 37.1 miles southeast. The town has Interstate 10 and US 90 within its limits, which can shape access and route planning for a bore. Our Yukon, Oklahoma main office is 613 road miles away, a drive of 11.6 hours, so distance is part of coordinating work in Van Horn and nearby areas.
Places near Van Horn
- Directional boring in Sierra Blanca: 31.5 miles west
- Directional boring in Valentine: 37.1 miles southeast
What boring work comes up around Van Horn’s Frontage Road?
- Highway crossing: A line under Interstate 10 needs a bore planned for the highway right of way, with the utility owner handling the TxDOT permit.
- Water service: A service route near the City of Van Horn water system may pass beneath Aster Street, with marked utilities exposed before drilling.
- Fiber route: A fiber bore along Frontage Road can avoid cutting the street surface while following a route checked for existing lines.
- Creek crossing: A route near Carrizo Creek needs planning around the channel and a check for U.S. Army Corps of Engineers jurisdiction.
- Rail crossing: A line beneath Union Pacific track on the Toyah Subdivision needs an agreement from the railroad before the crossing is planned.
- Drainage bore: A crossing near Van Horn’s unnamed drainage can keep the surface route intact while the bore plan accounts for the drainage feature.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What should I send for a Van Horn bore near Desert Street?
For a Van Horn quote, start with the address or map pin, such as a point on Desert Street. Tell us what will go underground, then give the pipe or conduit size and the footage. A sketch or plans help show whether the route meets Interstate 10, Union Pacific track or a marked utility, and let us plan the bore path and pits.
A straightforward run through Double loam with clear access may take less planning than a route under Interstate 10 or Union Pacific track. Price reflects footage, pipe or conduit size, soil and rock, and the utilities that must be crossed and exposed. Pavement, creek or drainage crossings, pits, excavator time and sand backfill also affect the work. Van Horn is 613 road miles from Yukon, so mobilization is another part of the job scope.
Questions people ask about boring in Van Horn
Does Trinity take directional boring jobs in Van Horn and Culberson County?
Yes. We take directional boring work in Van Horn, with our own crews and partner drilling contractors we have vetted available for the work. On Van Horn projects, we keep you dealing with Trinity from the first call through the bore log, whichever crew is on site. A route under Frontage Road can be scoped with the same point of contact.
Who approves a bore under Interstate 10 in Van Horn?
The utility owner applies for the TxDOT utility permit when a bore uses the Interstate 10 right of way. The TxDOT El Paso District reviews it. We supply the bore plan and profile to the line owner, who files through RULIS. The permit sets the allowed work and may specify a different cover depth.
What do we confirm for a Van Horn bore under Union Pacific track, including casing, depth, and flagging?
A crossing beneath Union Pacific track requires an agreement from the railroad that owns it. For a Van Horn crossing under Union Pacific track, we set casing, depth, and flagging details in the agreement. The railroad has 1.51 track miles inside Van Horn on the Toyah Subdivision, so a proposed route needs to be checked against the track location.
Can you bore a line under Carrizo Creek near Van Horn?
A bore can be planned for a creek crossing, but the route needs a site review first. Carrizo Creek is 0.2 miles from Van Horn’s limits, and water crossings are checked during planning for U.S. Army Corps of Engineers jurisdiction. The crossing plan also needs to account for the channel and the bore depth.
For Van Horn underground work, do we identify the City of Van Horn as owner and groundwater wells as the system source?
Groundwater wells supply Van Horn’s public water system, owned by the City of Van Horn, and we account for it in underground planning. In Van Horn, we plan underground work with a water system serving 2,063 people through 1,376 service connections. That network is relevant when planning a bore near Aster Street because existing water lines need to be located and exposed where they meet the bore path.
Which electric utilities report service in Van Horn and Culberson County?
El Paso Electric, Oncor Electric Delivery Company and Rio Grande Electric Cooperative report electric service in Culberson County. The line owner for a particular address must be confirmed before planning a conduit bore near Desert Street. We do not assume that one of those utilities serves every location in Van Horn.
Can I reach Trinity after hours for an urgent Van Horn bore near Aster Street?
Yes. A person answers our phone at (405) 409-7423 24 hours a day, including for urgent work near Aster Street. Emergency scope can affect access, crew timing and planning, so have the location and the line type ready when you call.
How much notice does Texas811 need before a Van Horn bore on Frontage Road?
Texas law requires a locate request at least 48 hours before excavation begins, not counting Saturdays, Sundays or legal holidays, and no earlier than 14 days before it. When scheduling Van Horn work, we follow Texas811’s description of at least two working days for notice. If a Frontage Road start slips more than 14 days past the original notice, make a new request and have worn or moved marks refreshed before work continues.
What affects the cost of directional boring in Van Horn near Interstate 10?
For Van Horn boring, we set cost from the job scope rather than treating every underground project alike. Length, pipe or conduit size, Double loam and any rock, exposed utilities, pavement, pits and drainage crossings all affect the work. A route near Interstate 10 may need added permit planning, while Van Horn’s 613 road miles from Yukon also affect mobilization. For Van Horn work, we allow high profile or emergency work to change the scope and adjust underground planning accordingly.
Where the Van Horn facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Van Horn
- U.S. Census Bureau, TIGER/Line 2024: Van Horn boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Van Horn
- U.S. Census Bureau, American Community Survey 2019 to 2023: Van Horn housing units and year built
- Macrostrat geologic map compilation: map units under Van Horn
- U.S. EPA Safe Drinking Water Information System: public water systems serving Van Horn
- U.S. Department of Transportation, North American Rail Network: track owners in Culberson County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Culberson County
- U.S. Geological Survey, Elevation Point Query Service: Van Horn elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Van Horn
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Van Horn
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Van Horn, Texas
Type the address of your job in Van Horn. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Van Horn
All counties: Texas county list.
