trinityboringsolutions.com

Sierra Blanca Texas Directional Boring: McAllister Loam, Union Pacific, Interstate 10

Quick Answer: What does the top five feet look like, and what lies below? In Sierra Blanca, the USDA soil survey maps fine sandy loam at the surface and sandy clay loam at about 40 inches. We take directional boring, also called horizontal directional drilling (HDD), where a route may need to pass beneath Interstate 10 or Union Pacific track. Sierra Blanca is 647 road miles from our Yukon, Oklahoma main office, so the route and its crossings shape mobilization. McAllister soil and cemented material below the surface can call for staged reaming and careful steering.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Sierra Blanca bores at a glance

  • County seat of Hudspeth County, Texas. Population 315 (2020 Census count).
  • Road distance from our Yukon, Oklahoma main office: 647 miles, about 12.2 hours of driving.
  • Ground: McAllister soil is mapped on 34 percent of the area, with sandy clay loam about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 3 percent of the area.
  • Highways inside the boundary: Interstate 10, Interstate 10 Business and RM 1111. State permit office: TxDOT El Paso District.
  • Railroad track inside the boundary: Union Pacific, with 4 mapped street and rail crossings.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who does directional boring in Sierra Blanca near Union Pacific track?

At the top, Sierra Blanca’s USDA soil survey maps fine sandy loam; about 40 inches down it maps sandy clay loam and cemented material. What lies beneath depends on the route. The Census Bureau counted 315 people here in the 2020 Census. We install water, sewer, gas, electric conduit and fiber for routes along Texas Boulevard, Santa Fe Boulevard or toward Interstate 10.

Our main office is in Yukon, Oklahoma, and Sierra Blanca work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore is roughly 4,100 feet of 48 inch pipe under the Arkansas River in Tulsa. A typical Sierra Blanca job is smaller, such as a service line or conduit beneath a street or Union Pacific track. From our first call through the bore log, we work with Trinity for Sierra Blanca directional boring.

Compact Ditch Witch drill rig boring a new utility line across a front yard on a residential street in Edmond, Oklahoma
Our compact Ditch Witch drill boring a new utility line across a front yard on a residential street in Edmond, Oklahoma. Photos on this page are from our jobs in Oklahoma and Texas.

What kind of ground does McAllister soil bring to a Sierra Blanca bore?

The USDA soil survey maps McAllister fine sandy loam across 34% of Sierra Blanca, with Culberspeth and Chispa soils also covering substantial areas. At the surface, fine sandy loam is mapped across 34%, while gravelly loam is mapped across 30%. About 40 inches down, sandy clay loam is mapped across 34% and clay loam across 23%; the average clay content at that depth is 26%. For Sierra Blanca, we treat these mapped patterns as planning information, not as test borings. Clay can hold a hole but may cling to a reamer, so the route needs field checking.

USDA soil survey, inside the Sierra Blanca mapped community boundaryWhat is mapped
Soil series mappedMcAllister 34 percent, Culberspeth 30 percent, Chispa 26 percent and Reyab 7 percent
Texture at the surfacefine sandy loam 34 percent, gravelly loam 30 percent and sandy loam 16 percent
Texture about 40 inches downsandy clay loam 34 percent, cemented material 30 percent and clay loam 23 percent
Engineering class about 40 inches downlean clay (CL) 57 percent and clayey gravel (GC) 10 percent
Average clay content about 40 inches down26 percent
Bedrock mapped within 60 inches3 percent of the area (3 percent hard rock, 0 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils7 percent of the area
High corrosion risk for uncoated steel0 percent of the area

Bedrock is mapped within 60 inches in 3% of Sierra Blanca, and the mapped typical depth is 11 inches, so the specific route matters. A hard layer may slow the bit or deflect it where soil meets rock. A seasonal water table is not mapped within 60 inches, while flood prone soils cover 7% of the area; drainage paths still need attention. We do not map high steel corrosion risk in Sierra Blanca, so it is not part of our mapped boring conditions. The USDA geology map shows Quaternary alluvial fan deposits and Early Cretaceous sedimentary units, which can vary along a bore path.

How do crews handle Sierra Blanca’s sandy clay loam?

On a Sierra Blanca route, mapped sandy clay loam and cemented material are clues, not a substitute for checking the ground. We match the drilling approach to what the bore encounters near streets such as Pasture Road.

  1. Where McAllister soil holds the hole, we use a suitable fluid mix and ream in stages so sticky clay does not build up on the cutting tools.
  2. Fine sandy loam near Pasture Road can loosen behind the bit, so we support the bore as needed and have the pipe ready before the final ream.
  3. Cemented material mapped at about 40 inches may slow progress; we check the changing ground and adjust the cutting approach as the head advances.
  4. At a Texas Boulevard crossing, we expose marked utilities with hydrovac before drilling close, then track the head from the surface and record depth and pitch.
Open bore pit in red Oklahoma dirt with white PVC conduit stub ups and an orange safety barrier
An open bore pit in red Oklahoma dirt with PVC conduit stubbed up and a safety barrier around it.

Where might a Sierra Blanca line go under Pasture Road?

Interstate 10, Interstate 10 Business and RM 1111 are mapped inside Sierra Blanca’s community boundary. Any route near those roads needs to account for the road surface and the right of way. Pasture Road is the longest named street mapped here at 1.66 miles. Santa Fe Boulevard runs 1.43 miles and Texas Boulevard runs 1.42 miles. Boring can carry a line beneath pavement or a driveway without cutting across the surface, but the route still has to clear buried utilities and fit the site.

CrossingTypeMapped extentWho has a say
Interstate 10Interstate2.4 roadway miles insideState highway office
Interstate 10 BusinessInterstate2.1 roadway miles insideState highway office
RM 1111State highway6.8 roadway miles insideState highway office
Union PacificRailroad4.8 track miles insideThe railroad
Swipe the table sideways to see every column.

Union Pacific owns 4.8 track miles inside Sierra Blanca, on the Toyah and Valentine subdivisions. Four street and rail crossings are mapped, so a proposed route needs to account for the specific track crossing. No named streams are mapped inside the community, and no street crossings of named streams are mapped. The survey does show 3.98 miles of unnamed drainage, so a route near drainage still needs site review. Within one mile of Sierra Blanca, we map no lakes or ponds that would shape a boring crossing.

Who permits a bore in Sierra Blanca and Hudspeth County?

Sierra Blanca is an unincorporated community, so it has no city government; street and county matters belong to Hudspeth County, while state road rights of way are handled by TxDOT. For work in the Interstate 10, Interstate 10 Business or RM 1111 right of way, the utility owner applies through TxDOT’s RULIS system, reviewed by the TxDOT El Paso District. We prepare the bore plan and profile for that owner’s application. At an Interstate 10 crossing, electric and communication lines need 60 inches of cover below the lowest crossed grade; water needs 60 inches and pressurized sewer needs 60 inches. Union Pacific sets the terms for a track crossing through its crossing agreement.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Whose lines are already buried in Hudspeth County near Sierra Blanca?

The provider for a specific Sierra Blanca address must be confirmed with the county or local water district before a bore is planned; EPA drinking water records do not tie a system to this town. El Paso Electric and Rio Grande Electric Cooperative report electric service in Hudspeth County, but that does not identify the owner at every address. Before planning a conduit bore near Texas Boulevard, we confirm the line owner and the conduit requirements for that route.

Line ownerWhat it isSourceSize
El Paso Electric and Rio Grande Electric CooperativeElectric utilities reporting service in Hudspeth CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

We put Sierra Blanca’s median housing year in context for underground work: the American Community Survey 2019 to 2023 five year estimates put it at 1975. It estimates 35% of homes were built before 1960, 40% from 1960 to 1999 and 25% in 2000 or later. Along Santa Fe Boulevard, a replacement bore may need to find and avoid older buried lines, while a newer service still has to clear existing utilities. We use hydrovac potholing to expose marked lines before drilling near them; paint shows position, not depth.

Reel of yellow polyethylene gas pipe on a trailer staged for a directional bore
A reel of yellow polyethylene gas pipe on a trailer, staged for a directional bore.

What is near Sierra Blanca and Fort Hancock?

Sierra Blanca is the Hudspeth County seat in far West Texas, at an elevation of 4,479 feet, with 4.78 square miles inside the mapped community boundary. Its ZIP code is 79851. Fort Hancock is 30.7 miles west, and Van Horn is 31.5 miles east. Sierra Blanca serves as the county seat rather than a city with its own government. From our Yukon, Oklahoma main office, the drive is 647 road miles and 12.2 hours. That distance is part of planning a bore near Interstate 10 or RM 1111.

Places near Sierra Blanca

What kinds of bores come up near Santa Fe Boulevard in Sierra Blanca?

  • Highway crossing: A bore beneath Interstate 10 can keep pavement intact, with the route and required cover planned for the road crossing.
  • Street service: A water or sewer service under Pasture Road can pass below the traveled surface rather than cut across it.
  • Fiber conduit: A fiber route along Santa Fe Boulevard needs a planned path around marked utilities and nearby driveways.
  • Rail crossing: A line beneath Union Pacific track needs a route coordinated with the railroad’s crossing agreement and its conditions.
  • Drainage crossing: Near the 3.98 miles of unnamed drainage, a route needs site review for the channel and its banks.
  • Electric conduit: Near Texas Boulevard, we confirm whether El Paso Electric or Rio Grande Electric Cooperative owns the line before planning conduit.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

How do I get a quote for a Sierra Blanca bore near Interstate 10?

For a Sierra Blanca quote, give us the address or map pin, what will go underground, the pipe or conduit size and the footage. For example, a route near Interstate 10 needs a clear location, while a line along Texas Boulevard needs its material and size. A sketch or plans help us see the route and crossings.

Sierra Blanca is 647 road miles from Yukon, so mobilization is part of the job scope. McAllister soil, cemented material and other ground along the route affect drilling time. The number of utilities to expose, pavement near Interstate 10, a Union Pacific crossing, drainage, pits and excavator time also shape the work. Pipe size, bore length, sand backfill and emergency or high profile conditions can change the plan. We build the quote around the proposed route, not one isolated factor.

Questions people ask about boring in Sierra Blanca

Does Trinity take directional boring jobs in Sierra Blanca and Hudspeth County, and who staffs them?

Yes. We take directional boring work in Sierra Blanca, and our own crews handle jobs alongside crews from satellite yards run by drilling contractors we have vetted. Trinity remains your contact through the bore log. That applies to a route near Pasture Road or a crossing planned around Interstate 10.

What does a Sierra Blanca bore under Union Pacific track need?

Union Pacific owns the track mapped through Sierra Blanca, with 4.8 track miles inside the community. A bore beneath it needs a crossing agreement with the railroad. The agreement sets conditions such as casing, depth and flagging, so a route near one of the four mapped street and rail crossings needs that coordination.

Who owns electric lines in Sierra Blanca and Hudspeth County, and who confirms conduit specs?

El Paso Electric and Rio Grande Electric Cooperative report service in Hudspeth County, but neither can be assumed to own the line at a specific Sierra Blanca address. We confirm the owner and conduit requirements before planning a bore, including one near Texas Boulevard. Hydrovac potholing can expose marked lines on the route.

Who is in charge of Sierra Blanca streets like Texas Boulevard, and must a bore cut them?

Sierra Blanca is unincorporated and has no city government, so its streets are not managed by a city. A bore under Texas Boulevard can avoid cutting the paved surface when the route and ground allow. Work in a state highway right of way, such as RM 1111, goes through TxDOT.

How old are homes and buried lines near Santa Fe Boulevard in Sierra Blanca?

The American Community Survey 2019 to 2023 estimates put the median housing year at 1975; 35% of homes were built before 1960. That does not date any specific buried line, so a replacement bore near Santa Fe Boulevard still needs utility locating and potholing before drilling close to marked lines.

What ground does a Sierra Blanca bore cross in McAllister soil?

The USDA soil survey maps McAllister fine sandy loam across 34% of Sierra Blanca. At about 40 inches, sandy clay loam is mapped across 34%, with cemented material across 30%. Sticky clay can cling to the reamer, while a cemented layer may slow the bore, so the route needs field checks.

Can I reach Trinity after hours about an urgent Sierra Blanca bore near Texas Boulevard?

Yes. At (405) 409-7423, we have someone answer Trinity’s phone 24 hours a day for Sierra Blanca callers. For an urgent bore near Texas Boulevard, tell us the location, what needs to go underground and what is known about nearby utilities so we can discuss the job.

How early should I contact Texas811 for a Sierra Blanca bore near Pasture Road?

Texas law requires a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. If a Pasture Road start slips more than 14 days past the original notice, submit a new request. Marks that wear off or move need refreshing through Texas811 before work continues.

What affects the cost of a Sierra Blanca directional bore near Interstate 10?

The price depends on the route and scope. Sierra Blanca’s 647 road miles from Yukon affect mobilization; McAllister soil or cemented material can affect drilling; and Interstate 10 pavement or a Union Pacific crossing adds coordination. Pipe size, footage, utilities to expose, drainage, pits and excavator time also matter.

Where the Sierra Blanca facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Sierra Blanca

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Sierra Blanca, Texas

Type the address of your job in Sierra Blanca. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Sierra Blanca

Same county: Dell City. All counties: Texas county list.