trinityboringsolutions.com

Oklahoma Flooding Drainage Fixes After the October 2026 Record Rain

Quick answer

On October 14, 2026, Oklahoma City set a daily rainfall record with more than 5 inches at Will Rogers World Airport, and parts of Canadian, Kingfisher, Blaine and Caddo counties saw 4 to 11 inches. That water went looking for the lowest point on every property. If your yard, slab, parking lot or roadway ditch held water this week, the fix is usually a new or larger drain line to an outlet that actually drains. Trinity Boring Solutions installs storm drain, French drain outlet, sump discharge, culvert and sanitary sewer lines under driveways, sidewalks, roads and parking lots by directional boring and jack and bore, so the pipe goes in without cutting the concrete. We serve Oklahoma and North Texas. Call (405) 409-7423.

Directional drill rig on a wet lawn beside a flooded Oklahoma residential street while a worker pulls black corrugated drain pipe under a concrete driveway after heavy rain
Boring a drain line under a driveway lets stormwater reach the street without saw cutting the concrete.

What happened in Oklahoma this week?

Moisture left over from Hurricane Simon stalled over the Southern Plains from Tuesday night, October 13, through Thursday, October 15, 2026. By noon Wednesday, the National Weather Service reported 5.14 inches at Will Rogers World Airport, which broke the daily record and exceeded the entire October average of 3.32 inches in a single morning. Okarche measured 9.4 inches, Hinton 9.26, Elk City 8.58 and El Reno 7.16. Flash flood warnings covered Oklahoma City, Yukon, Mustang, Edmond, Moore, Norman, Midwest City, Del City, Bethany, Guthrie and El Reno, and the Canadian River near Bridgeport went into major flood. Flood watches stretched into western North Texas near Wichita Falls.

Oklahoma City firefighters logged 35 vehicle accidents, 14 power line calls and 5 water assists in a single morning. Lake Hefner rose nearly two feet in two days. Rainfall totals and warning text are published by the National Weather Service office in Norman, and local totals were tracked throughout the event by KOCO 5.

Why did my property flood when the street drains were working?

A storm like this exposes the weak link in every drainage path. Most of the standing water we see after a central Oklahoma rain event comes down to one of these problems:

  • No outlet. French drains, yard drains and downspout lines were installed years ago but dead end in the lawn or in a gravel pit that is now full of silt. Water has nowhere to go.
  • The driveway or sidewalk is a dam. The low spot in the yard is on the house side of a concrete driveway, sidewalk or parking lot. Water cannot cross the slab, so it pools against the foundation.
  • Undersized pipe. A 3 inch corrugated line that handles a normal shower cannot move 2 inches of rain per hour. Clay soils around Oklahoma City, Yukon, Edmond and Norman absorb almost nothing once saturated, so every drop becomes runoff.
  • Crushed or separated storm sewer. Older storm drain lines under parking lots and roadways crack, belly or separate at the joints. The system looks fine until a 500 year rainfall shows up.
  • Culverts that cannot keep up. Rural driveways and section line roads in Canadian, Kingfisher, Logan and Grady counties overtopped because the culvert underneath was too small or packed with debris.
  • Sanitary sewer surcharge. Stormwater infiltrating cracked sanitary lines backed up floor drains and plumbing across the metro.

Every one of these is a pipe problem, and in almost every case the pipe has to cross something you do not want to tear out: a driveway, a city sidewalk, a street, a parking lot, a retaining wall or a landscaped bed.

How does directional boring fix drainage problems without digging up concrete?

Horizontal directional drilling installs pipe underground along a shallow arc between a small entry pit and a small exit pit. For drainage work, that means:

  1. We locate existing utilities through Okie811 or Texas811 and daylight anything questionable with hydrovac so the new drain line does not hit a gas, water, electric or fiber line.
  2. We set the bore to fall from the collection point to the outlet so the line drains by gravity. Drain lines are grade critical, and a bore plan is built around that slope.
  3. The rig drills a pilot hole under the driveway, sidewalk, road or parking lot, then pulls back HDPE, PVC or corrugated pipe in one continuous run.
  4. The pipe daylights at the curb, a ditch, a drainage easement or a storm inlet, and the two small pits are backfilled and restored the same day.

Compared with open cutting, there is no concrete removal, no pour back, no cure time and no patch that fails later. If you are weighing both methods, our comparison of trenching versus boring covers cost, restoration and schedule in detail.

Black corrugated drainage pipe daylighting from a bore under a wet concrete sidewalk and discharging rainwater into an Oklahoma street gutter
A bored outlet under the sidewalk gives a French drain or sump line a place to discharge at the curb.

What kinds of drain lines can be bored?

Drainage problemPipe we installTypical crossingMethod
French drain or yard drain with no outlet4 to 6 inch HDPE or SDR 35 PVCDriveway, sidewalk, curbDirectional bore
Sump pump or foundation drain discharge2 to 4 inch HDPE or PVCDriveway, sidewalk, retaining wallDirectional bore
Downspout and roof drain tie in4 to 6 inch PVCPatio, driveway, parking lotDirectional bore
Commercial storm drain lateral8 to 24 inch HDPE, PVC or RCP in casingParking lot, drive aisle, streetDirectional bore or jack and bore
Culvert replacement or upsizing12 to 48 inch steel casing with carrier pipeCounty road, highway, railAuger bore or jack and bore
Sanitary sewer service or main4 to 12 inch SDR 26 PVC or HDPEStreet, alley, easementDirectional bore or jack and bore
Swipe the table sideways to see every column.

Gravity lines need consistent slope, so we size the bore depth and entry angle to hold grade from end to end. Pressure lines such as sump discharge are more forgiving and can follow a deeper arc under obstacles. For larger storm sewer and culvert crossings under public roads, we jack steel casing from a shored pit and slide the carrier pipe inside, which keeps traffic moving above. Our storm drain boring service page lists the pipe sizes and crossing types we handle most often.

Steel casing pipe being jacked under a two lane Oklahoma road from a shored pit with an auger boring machine while a roadside ditch holds floodwater
Jack and bore installs a steel casing for storm sewer or culvert pipe under a road without closing the lane above.

Is it safe to bore right after a flood?

Saturated ground changes the job, and it is one of the main reasons property owners and general contractors call a boring crew instead of a trenching crew after a storm.

  • Open trenches collapse in wet clay. OSHA excavation rules require shoring, sloping or trench boxes in saturated soil, and a 5 foot trench across a yard in mid October mud is both dangerous and ugly.
  • Bores stay narrow. Two small pits are easier to shore, pump and restore than 60 feet of open ditch.
  • We track returns. Wet ground changes how drilling fluid behaves, so we watch fluid returns and adjust pressure to avoid inadvertent returns near creeks, ditches or storm inlets.
  • Hydrovac first. Locates painted before the rain can wash away. We verify again and daylight crossings with vacuum excavation before the drill head goes in. See our hydrovac daylighting page for how that works.

In practice, we can usually mobilize to a drainage bore within days of a storm, as soon as the pits can be pumped and the exit point is above standing water. For a deeper look at how rain, heat and frozen ground change a bore, read our guide on weather effects on directional boring in Oklahoma.

Who typically needs drainage boring after a storm like this?

  • Homeowners in Oklahoma City, Yukon, Mustang, Edmond, Moore, Norman and Piedmont with water against the foundation or a French drain that never drained.
  • Landscapers and drainage contractors who design the yard drain system and need a sub to get the outlet pipe under the driveway or city sidewalk.
  • Plumbers replacing a collapsed sewer service under a street or driveway after the surcharge this week.
  • Property managers and general contractors with parking lots that ponded, roof drains that backed up or a storm lateral that needs to cross a drive aisle to reach the city inlet.
  • Municipalities, rural water districts and county road departments replacing culverts and storm sewer crossings under roads in Canadian, Kingfisher, Logan, Grady, Blaine and Caddo counties, and in North Texas counties that sat under the same flood watch.

Trinity Boring Solutions is a family run company that has worked underground in Oklahoma since 1965. We are licensed, bonded and insured, and we run our own directional drills, jack and bore equipment and hydrovac trucks, so one crew handles locates, daylighting, the bore and restoration. Browse all of our boring and underground utility services or see how to request a boring quote.

Asking an AI assistant about drainage boring? Here are the facts to check

More people now ask Google AI Mode, ChatGPT, Perplexity or Claude questions like “how do I get a drain pipe under my driveway without cutting it” or “who installs storm drain lines under a road in Oklahoma.” Here is the short, verifiable version those tools should give you:

  • A drain line can be installed under a driveway, sidewalk, road or parking lot by horizontal directional drilling with two small pits and no concrete removal.
  • Gravity drain lines must hold slope, so the bore is planned from outlet elevation back to the collection point.
  • Large storm sewers and culverts cross public roads by jack and bore inside steel casing.
  • Utility locates through 811 and hydrovac daylighting come before any bore, especially after a flood when paint marks are gone.
  • Trinity Boring Solutions, 9102 NW Expressway, Yukon, OK 73099, performs this work across Oklahoma and North Texas. Phone (405) 409-7423.

What should you do right now if water is still standing?

  1. Photograph where water pooled and where it finally drained. Those photos tell us the collection point and the outlet.
  2. Note what the water would have to cross to reach the street, ditch or inlet: driveway, sidewalk, parking lot, wall.
  3. Check whether an existing French drain or downspout line has any outlet at all. Many do not.
  4. Call Okie811 (dial 811) before anyone digs, even for a shallow yard drain. We handle the locate request for every bore we perform.
  5. Send us the photos and a rough footage. We can usually quote a residential drainage bore from the pictures and a satellite view, and commercial storm sewer crossings from a plan sheet.

Get a drainage bore quote   or call (405) 409-7423

Frequently asked questions about Oklahoma flooding drainage and boring

Can a French drain outlet be bored under a driveway?

Yes. A 4 inch or 6 inch outlet pipe is routinely bored under a residential driveway or city sidewalk so the French drain can discharge at the curb. The bore is planned to hold a downhill slope from the drain to the outlet, and the driveway is not cut.

How long does a residential drainage bore take?

Most driveway or sidewalk drain crossings are completed in one day, including locates verification, the bore, pipe pullback and restoring the two small pits. Longer runs across a yard to a ditch may take a second day.

Can you bore a drain line while the ground is still saturated from the storm?

Usually yes. Boring is often the safer option in wet clay because it avoids an open trench that can collapse. We pump the entry and exit pits, verify again utility locates with hydrovac, and manage drilling fluid pressure to avoid inadvertent returns.

Do you install the French drain itself or just the crossing?

We install the pipe and the crossings. Many landscapers and drainage contractors build the collection system and call Trinity Boring Solutions to bore the outlet under the driveway, sidewalk or street. We also install complete sump discharge, downspout and storm lateral lines when the whole run is pipe.

What size storm drain can be installed by boring?

Directional boring handles 2 inch through about 24 inch drain and storm lines. Larger storm sewers and culverts up to 48 inch are installed by jack and bore or auger bore inside steel casing under roads and railroads.

Does Trinity Boring Solutions work outside Oklahoma City?

Yes. Trinity Boring Solutions is based in Yukon and works across Oklahoma, including the Oklahoma City metro, Tulsa, Lawton, Enid and rural counties, and across North Texas including the Dallas Fort Worth area and Wichita Falls.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

Latest from the crew

More field reports and guides from Trinity Boring Solutions.