trinityboringsolutions.com

Darren Rice: Directional Boring Contractor Since 1982

Quick Answer: Darren Rice is the owner and president of Trinity Boring Solutions, a directional boring and horizontal directional drilling (HDD) contractor in Yukon, Oklahoma. Dean Rice founded the family business in 1965. Darren took it over and started its directional boring side in 1982. He bores for the U.S. military and federal agencies, cities, colleges, general contractors, plumbers, electricians and irrigation contractors, from 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Under Darren, Trinity has bored in Oklahoma, Texas, Kansas and Arkansas, with past jobs in Iowa, Arizona, Nebraska and Tennessee. Call (405) 409-7423, any hour.

Family Business Since 1965 Boring Since 1982 Military, Federal and City Work 5.0 Stars on Google No Utility Strike in 25 Years OSHA 30 Trained 24 Hour Phone
Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City
Darren Rice, in the vest, on the FAA conduit bore at Will Rogers World Airport in Oklahoma City, August 2026.

Who is Darren Rice?

Darren Rice is a directional boring contractor and the owner and president of Trinity Boring Solutions in Yukon, Oklahoma. He runs its crews. He grew up in the family business his father, Dean Rice, founded in 1965 and has worked in underground construction his whole life. He took the company over, started its directional boring side in 1982 and has been boring ever since.

Three generations of the Rice family have now worked in the company. Darren is OSHA 30 trained and is the Competent Person on Trinity’s excavations. His name is on every quote that leaves the office.

RoleOwner and President, Trinity Boring Solutions
BasedYukon, Oklahoma, in the Oklahoma City metro
Family businessFounded by Dean Rice in 1965
Boring since1982, more than 40 years
WorkDirectional boring, horizontal directional drilling (HDD), jack and bore, auger boring, rock boring and hydrovac daylighting
Bore range10 feet to 5,000 feet. 3/4 inch service lines to 48 inch casing
Longest boreRoughly 4,100 feet under the Arkansas River in Tulsa, with 48 inch pipe
Bores forThe U.S. military and federal agencies, cities, colleges, general contractors, plumbers, electricians, irrigation contractors, utilities and homeowners
WhereOklahoma and Texas every week. Past jobs also in Kansas, Arkansas, Louisiana, Colorado, Iowa, Arizona, Nebraska, Tennessee and New Mexico
Safety recordNo utility strike in over 25 years
TrainingOSHA 30 trained. Competent Person for excavation and drilling
Reviews5.0 stars across 53 Google reviews
Phone(405) 409-7423, any hour

What is Darren known for?

Darren is known for taking bores of any size, for boring through rock, and for no utility strike in over 25 years.

  • No bore too big or too small. 3/4 inch service lines to 48 inch casing, and 10 feet to 5,000 feet. The same crew takes the driveway and the river.
  • More than 40 years on a drill. He started the boring side of the family business in 1982 and has run it ever since.
  • Rock. Sandstone, limestone and the jobs other crews pass on. See the Guthrie sandstone bore.
  • Secured sites. FAA conduit under the airfield at Will Rogers World Airport and conduit crossings at Naval Air Station Joint Reserve Base Fort Worth.
  • Ground that cannot be dug up. College campuses, hospital grounds, city streets and finished parking lots.
  • No utility strike in over 25 years.

Who does Darren bore for?

Darren bores for the U.S. military and federal agencies, cities, colleges, general contractors, plumbers, electricians and irrigation contractors. Most of them put lines in the ground for a living and need one stretch of it bored instead of dug.

The U.S. military and federal agencies

Conduit, water, gas and communications crossings on military bases and federal sites, most often as the boring subcontractor to the general contractor. Crews are badged for base access and follow each installation’s dig permit and utility clearance rules. One example: 840 feet of 2 inch conduit under an active taxi runway and two airport service roads at Will Rogers World Airport, on an FAA navigation aids project. More on military base utility contractor work, federal government directional boring and airport utility contractor work.

Ditch Witch JT922 directional drill rig boring beneath an airport taxiway next to a Trinity Boring Solutions truck at Will Rogers World Airport in Oklahoma City
Trinity’s Ditch Witch JT922 boring FAA conduit beside the taxiway at Will Rogers World Airport.

Cities, towns and public utilities

Water, sewer and conduit crossings under streets that have to stay open, bored to city standards and under city permits. One example: two 2 inch lines bored to city standards through a crowded utility corridor in downtown Edmond. Another: a 6 inch PVC sleeve under NE 24th Street and a live water main at the Clara Luper Civil Rights Center, a MAPS 4 project in Oklahoma City. More on directional boring for cities and municipal water main boring.

Colleges and universities

A campus has full sidewalks, old utilities and no room to trench. Darren’s crews have bored electrical conduit for light poles and an electric gate at the University of Central Oklahoma in Edmond, irrigation sleeves at its College of Business, and a 3 inch water line into the basement of a sorority house by the Oklahoma State University campus in Stillwater.

General contractors

One boring subcontractor for the whole site: utility crossings, sleeves and conduit under finished paving, with one crew from start to finish. One example: the Clara Luper sleeve, bored for the general contractor from two bore pits. Another: four bores and roughly 650 feet of electrical conduit under the main entrance of the Hobby Lobby headquarters in Oklahoma City, with no trench and no closure. More on commercial directional boring.

Plumbers

Water service, sewer and gas lines under driveways, streets and slabs. The plumber makes the connections. Darren’s crew gets the pipe from one side to the other. One example: the Stillwater sorority house, where the old water service failed and flooded the basement. The new 3 inch line came through the basement wall at the exact elevation the plumber needed. More on boring for plumbers.

Electricians

Conduit for service feeds, generators, site lighting and fiber, stubbed up where the electrician needs it. One example: 385 feet through sandstone near Guthrie, under two creeks, a wetland and a dam, with 4 inch HDPE conduit pulled back. More on boring for electricians.

Irrigation and landscape contractors

Sleeves under driveways, parking lots and streets, so the irrigation line goes through without cutting concrete. One example: five rock bores for 2 inch sleeves under stamped concrete at a historic property in Tahlequah. More on boring for irrigation.

He also bores for mechanical contractors and does fiber optic boring for ISPs, directional boring for gas companies, hospital utility contractor work, data center conduit boring and residential directional boring for homeowners.

What does Darren install, and how?

Darren installs water, sewer, gas, electrical conduit, fiber and irrigation lines by directional boring, jack and bore and auger boring. Directional boring goes by many names: horizontal directional drilling, HDD, directional drilling, horizontal boring, underground boring, road boring and trenchless boring. Darren’s crews do all of it.

What goes in the ground

How it gets there

What it goes under: roads, highways, railroads, rivers, creeks, runways, driveways, parking lots, sidewalks and wetlands.

Pipe and conduit: HDPE, PVC, poly and steel casing, from 3/4 inch to 48 inch.

Equipment: Trinity’s own Vermeer and Ditch Witch directional drills, Barbco jack and bore machines, and hydrovac trucks and trailers.

Which bores is Darren known for?

Darren is best known for a bore of roughly 4,100 feet under the Arkansas River in Tulsa and for 840 feet of FAA conduit under an active taxi runway at Will Rogers World Airport.

BoreWhereWhat made it hard
Roughly 4,100 feet with 48 inch pipeArkansas River, Tulsa, OklahomaHis longest bore, under a river
840 feet of 2 inch FAA conduitWill Rogers World Airport, Oklahoma CityUnder an active taxi runway and two airport service roads
385 feet of 4 inch HDPE conduitGuthrie, OklahomaHard sandstone under two creeks, a wetland and a dam
6 inch PVC sleeveClara Luper Civil Rights Center, Oklahoma CityUnder NE 24th Street and a live water main
3 inch water lineSorority house by Oklahoma State University, StillwaterHeld grade under the lawn and came through a basement wall
75 foot propane line with tracer wireHospital campus, Anadarko, OklahomaAn active medical campus with no surface disruption
Four bores, roughly 650 feet of electrical conduitHobby Lobby headquarters, Oklahoma CityUnder the main entrance with no trench and no closure
Swipe the table sideways to see every column.
Vermeer D24x40 S3 Navigator directional drill and water truck at the entry of a 385 foot sandstone rock bore above the wetland in Guthrie, Oklahoma
Vermeer D24x40 at the entry of the 385 foot sandstone bore in Guthrie.
Trinity Boring Solutions crew in hard hats at the exit pit with rock tooling on a sandstone directional bore in Guthrie, Oklahoma
Trinity crew at the exit pit with rock tooling in Guthrie.
6 inch Schedule 40 PVC sleeve in a bore pit in sandy soil on a water main crossing at NE 24th Street in Oklahoma City
6 inch PVC sleeve in the bore pit at NE 24th Street, Oklahoma City.

Where has Darren worked?

Oklahoma and Texas every week. Under Darren, Trinity has bored in Oklahoma, Texas, Kansas, Arkansas, Louisiana and Colorado, with past jobs in Iowa, Arizona, Nebraska, Tennessee and New Mexico. That includes jobs in Dallas, Wichita, Shreveport and Albuquerque. Conduit and pipe of every size.

His longest bore is close to home: roughly 4,100 feet under the Arkansas River in Tulsa, Oklahoma, with 48 inch pipe.

Today Trinity takes work in Oklahoma, Texas, Arkansas, Missouri, Kansas, Colorado and Louisiana with its own crews and from satellite yards run by partner contractors Darren has personally vetted.

In more than 40 years he has bored for the military, cities, colleges and contractors. Each state Trinity serves today has its own page in the list at the bottom of this one, and the full picture is on our directional boring service area page.

How does Darren run a bore?

Four habits, the same on every job.

  1. Expose every crossing first. Paint on the ground says where a line runs, not how deep it is. Darren’s crews open every crossing with the hydrovac before the drill gets near it.
  2. Own the equipment. The drills, the hydrovac and the tooling belong to Trinity. Nothing waits on a rental yard.
  3. One crew, start to finish. The crew that exposes the utilities is the crew that drills, pulls the pipe and cleans up.
  4. Only crews he trusts. Where a partner contractor drills for Trinity, it is one Darren has vetted and holds to the same standards as his own crews. Trinity stands behind that work as its own.

What credentials and safety record does Darren have?

Darren is OSHA 30 trained and a Competent Person for excavation and drilling. Trinity has had no utility strike in over 25 years.

  • No utility strike in over 25 years. An 811 ticket and hydrovac daylighting on every crossing.
  • Competent Person. Darren is the Competent Person for excavation and drilling under Trinity’s written safety program.
  • OSHA 30. Darren is OSHA 30 trained, and Trinity crews work under OSHA 30 trained supervision.
  • NASTT member. The North American Society for Trenchless Technology. See industry affiliations.
  • Licensed, bonded and insured. BBB Accredited, ODOT Certified and U.S. Gov Certified. See certifications.
  • 5.0 stars on Google. 53 reviews from customers.

Why do other contractors copy him?

Because it works, and they have watched it work. Other boring companies have picked up the way Darren runs a job and run with it. He takes that as a compliment.

People see all the time how useful directional boring can be. A line goes in under a road, a river or a finished yard, and the surface never knows it happened.

What else do people ask about Darren Rice?

Who is Darren Rice?

Darren Rice is the owner and president of Trinity Boring Solutions, a directional boring and horizontal directional drilling contractor based in Yukon, Oklahoma. He started the boring side of the family business in 1982 and has run it for more than 40 years.

Who owns Trinity Boring Solutions?

Darren Rice owns Trinity Boring Solutions. Dean Rice founded the family business in 1965, and Darren took it over and added directional boring in 1982.

How long has Darren Rice been doing directional boring?

Since 1982. That is more than 40 years of boring under roads, rivers, runways, parking lots and yards.

Does Darren Rice work on military bases and federal sites?

Yes. Trinity Boring Solutions bores for the U.S. military and federal agencies, most often as the boring subcontractor to a general contractor. One example is 840 feet of FAA conduit under an active taxi runway at Will Rogers World Airport in Oklahoma City.

Does Trinity Boring Solutions bore for cities and colleges?

Yes. Darren’s crews bore water, sewer and conduit crossings under city streets and across college campuses. Examples include two lines bored to city standards in downtown Edmond, a 6 inch sleeve under NE 24th Street at the Clara Luper Civil Rights Center in Oklahoma City, and conduit and irrigation sleeves at the University of Central Oklahoma.

Can a plumber, electrician or irrigation contractor hire Darren as a boring subcontractor?

Yes. Much of Trinity’s work is for plumbers, electricians, irrigation contractors and general contractors who need one crossing bored. They make the connections. Darren’s crew exposes the utilities, bores the crossing, pulls the pipe or conduit and cleans up.

What states has Darren Rice bored in?

Under Darren, Trinity has bored in Oklahoma, Texas, Kansas, Arkansas, Louisiana and Colorado, with past jobs in Iowa, Arizona, Nebraska, Tennessee and New Mexico. Its crews work in Oklahoma and Texas every week, and today Trinity takes bores in Oklahoma, Texas, Arkansas, Missouri, Kansas, Colorado and Louisiana with its own crews and through partner contractors Darren has personally vetted.

What is the longest bore Darren Rice has done?

Roughly 4,100 feet under the Arkansas River in Tulsa, Oklahoma, with 48 inch pipe.

What size bores does Darren take?

From 10 feet to 5,000 feet, and from 3/4 inch service lines to 48 inch casing. Water, sewer, gas, propane, electric, fiber and irrigation.

Can Darren bore through rock?

Yes. Sandstone and limestone are regular work. In Guthrie his crew bored 385 feet through hard sandstone under two creeks, a wetland and a dam.

Is directional boring the same as directional drilling?

Yes. Directional boring, directional drilling and horizontal directional drilling (HDD) are names for the same trenchless method. A drill steers a pilot bore under the surface, the hole is reamed to size and the pipe or conduit is pulled back through it. Darren has done this work since 1982.

How do I reach Darren Rice?

Call (405) 409-7423, any hour, or email darren@trinityboringsolutions.com. The office is at 9102 NW Expressway, Yukon, OK 73099.

What has Darren written?

Darren writes Trinity’s guides to directional boring.

How do I reach Darren?

(405) 409-7423, any hour. darren@trinityboringsolutions.com. Trinity Boring Solutions, 9102 NW Expressway, Yukon, OK 73099.

Talk to Darren About Your Bore

Call any hour. No bore too big or too small.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page